From b99267048ffd4e9768093a93757fe16704cdbf57 Mon Sep 17 00:00:00 2001 From: "p.kuiper" Date: Wed, 29 Sep 2021 12:58:34 +0200 Subject: [PATCH] Same print profile adjustments to the UM print profile as the S5 print profile, except for the maximum resolution adjustments --- resources/definitions/ultimaker3.def.json | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index 125a4036de..2a8e5d17df 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -98,7 +98,7 @@ "cool_min_speed": { "value": "5" }, "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" }, "infill_overlap": { "value": "0" }, - "infill_pattern": { "value": "'triangles'" }, + "infill_pattern": { "value": "'lines'" }, "infill_wipe_dist": { "value": "0" }, "initial_layer_line_width_factor": { "value": "120" }, "jerk_enabled": { "value": "True" }, @@ -140,6 +140,7 @@ "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, "skin_overlap": { "value": "10" }, + "skin_monotonic" : { "value": true }, "speed_layer_0": { "value": "20" }, "speed_prime_tower": { "value": "speed_topbottom" }, "speed_print": { "value": "35" }, @@ -158,8 +159,11 @@ "support_z_distance": { "value": "0" }, "switch_extruder_prime_speed": { "value": "15" }, "switch_extruder_retraction_amount": { "value": "8" }, + "top_bottom_pattern" : {"value": "zigzag"}, "top_bottom_thickness": { "value": "1" }, + "wall_material_flow": {"value": 90}, "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, + "retraction_combing": { "default_value": "noskin" }, "wall_0_inset": { "value": "0" }, "wall_line_width_x": { "value": "round(wall_line_width * 0.3 / 0.35, 2)" }, "wall_thickness": { "value": "1" },