GitHub-Proxy/Cura
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura synced 2025-08-19 23:49:05 +08:00
Code Issues Packages Projects Releases Wiki Activity

[PP-625]

Browse Source 
Adhesion reliability
- Maximum first layer speed is 50mm/s to improve adhesion reliability and bottom layer quality for all materials

PVA adhesion
 Use the PVA and BAM build plate and volume temperature when they are used as support material. The combi PLA/PVA will now have a 60C build plate temp. iso 55C to improve PVA adhesion.
Note: Adding an outer brim did not seem to help much, so did not add it

Holes in walls PETG
- Unretract speed from 45mm/s to 15mm/s to reduce bubbles in the walls

Print quality PC and CPE+
- Reduce retract length to prevent air capture during unretracts
- Inner wall before outer wall to place any gas bubbles in the inner wall for PC
- Inner wall speed equal to outer wall speed to prevent flow jumps for PC
- Lowered the flow rate to 95% for PC to prevent over extrusion and pressure build up
- Enable alternating wall to reduce warping stress
- 10C higher nozzle temperature (PC:290C, CPE+: 280C) to remelt the line below
    -  Keep initial and final temperature the same to prevent oozing
- 5C higher bed temperature (PC:115C, CPE+: 115C) to increase bed adhesion
- Chamber temperature to 50C (max. value S line)
- Enable a brim to reduce warping

Dimensional accuracy
- Increase xy_offset from -0.02 to +0.05mm to compensate

Prevent prime tower breaking
- Reduce prime tower speed to 50mm/s
- Reduce prime tower jerk to 2000mm/s3
- Increased minimum purge volume from 10 to 20mm3 for PVA (not for the other materials did not seem to work for them)
- Lower PVA initial and final temperatures to 215 and 210 resp.

Oozing during nozzle switches
- Set enable cool_during_extruder_switch to “all fans”
- Lower PVA initial and final temperatures to 215 and 210 resp.

Tree support improvements
- Decrease max. branch angle from 60 to 50 to prevent branches to overhang too much. Set preferred to 35 degree
- Increase Branch diameter from 5 to 8mm to get sturdier branches

Better thin wall structures
Increase the wall and skin thickness from 3 to 4 line widths for the Engineering intent to improve the print quality of thin walled injection molded like models.

Removing AA+0.6 core for the S line machines
This commit is contained in:
Paul Kuiper 2025-05-07 11:19:43 +02:00
parent b0af48ba24
commit bb28aaf137
50 changed files with 114 additions and 113 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
resources/definitions/ultimaker_s8.def.json
View File

@ -203,6 +203,13 @@
"unit": "mm/s",
"value": 50
},
"build_volume_temperature":
{
"force_depends_on_settings": [
"support_extruder_nr",
"support_enable"
]
},
"cool_during_extruder_switch": { "value": "'all_fans'" },
"cool_min_layer_time": { "value": 5 },
"cool_min_layer_time_overhang": { "value": 9 },
@ -246,7 +253,7 @@
{
"maximum_value_warning": "machine_max_jerk_xy / 2",
"unit": "m/s\u00b3",
"value": "jerk_print"
"value": "jerk_wall"
},
"jerk_print":
{
@ -390,6 +397,13 @@
"machine_nozzle_cool_down_speed": { "default_value": 1.3 },
"machine_nozzle_heat_up_speed": { "default_value": 0.6 },
"machine_start_gcode": { "default_value": "M213 U0.1 ;undercut 0.1mm" },
"material_bed_temperature":
{
"force_depends_on_settings": [
"support_extruder_nr",
"support_enable"
]
},
"material_extrusion_cool_down_speed": { "value": 0 },
"material_final_print_temperature": { "value": "material_print_temperature - 5" },
"material_initial_print_temperature": { "value": "material_print_temperature - 5" },
@ -452,7 +466,7 @@
"speed_prime_tower":
{
"maximum_value_warning": 300,
"value": "speed_wall"
"value": "min(speed_wall,50)"
},
"speed_print":
{
@ -558,7 +572,10 @@
"support_roof_height": { "minimum_value_warning": 0 },
"support_structure": { "value": "'normal'" },
"support_top_distance": { "maximum_value_warning": "3*layer_height" },
"support_tree_angle": { "value": 50 },
"support_tree_angle_slow": { "value": 35 },
"support_tree_bp_diameter": { "value": 15 },
"support_tree_branch_diameter": { "value": 8 },
"support_tree_tip_diameter": { "value": 1.0 },
"support_tree_top_rate": { "value": 20 },
"support_xy_distance_overhang": { "value": "machine_nozzle_size" },

2
resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg
View File

@ -14,5 +14,5 @@ variant = AA+ 0.4
[values]
infill_sparse_density = 20
top_bottom_thickness = =wall_thickness
wall_thickness = =line_width * 3
wall_thickness = =line_width * 4

2
resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg
View File

@ -14,5 +14,5 @@ variant = AA+ 0.4
[values]
infill_sparse_density = 20
top_bottom_thickness = =wall_thickness
wall_thickness = =line_width * 3
wall_thickness = =line_width * 4

2
resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg
View File

@ -14,5 +14,5 @@ variant = AA+ 0.4
[values]
infill_sparse_density = 20
top_bottom_thickness = =wall_thickness
wall_thickness = =line_width * 3
wall_thickness = =line_width * 4

2
resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg
View File

@ -14,5 +14,5 @@ variant = AA+ 0.4
[values]
infill_sparse_density = 20
top_bottom_thickness = =wall_thickness
wall_thickness = =line_width * 3
wall_thickness = =line_width * 4

2
resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg
View File

@ -14,5 +14,5 @@ variant = AA+ 0.4
[values]
infill_sparse_density = 20
top_bottom_thickness = =wall_thickness
wall_thickness = =line_width * 3
wall_thickness = =line_width * 4

2
resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg
View File

@ -14,5 +14,5 @@ variant = CC+ 0.4
[values]
infill_sparse_density = 20
top_bottom_thickness = =wall_thickness
wall_thickness = =line_width * 3
wall_thickness = =line_width * 4

2
resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg
View File

@ -14,5 +14,5 @@ variant = CC+ 0.4
[values]
infill_sparse_density = 20
top_bottom_thickness = =wall_thickness
wall_thickness = =line_width * 3
wall_thickness = =line_width * 4

2
resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg
View File

@ -14,5 +14,5 @@ variant = CC+ 0.4
[values]
infill_sparse_density = 20
top_bottom_thickness = =wall_thickness
wall_thickness = =line_width * 3
wall_thickness = =line_width * 4

2
resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg
View File

@ -14,5 +14,5 @@ variant = CC+ 0.4
[values]
infill_sparse_density = 20
top_bottom_thickness = =wall_thickness
wall_thickness = =line_width * 3
wall_thickness = =line_width * 4

2
resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg
View File

@ -14,5 +14,5 @@ variant = CC+ 0.6
[values]
infill_sparse_density = 20
top_bottom_thickness = =wall_thickness
wall_thickness = =line_width * 3
wall_thickness = =line_width * 4

2
resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm_engineering.inst.cfg
View File

@ -14,5 +14,5 @@ variant = CC+ 0.6
[values]
infill_sparse_density = 20
top_bottom_thickness = =wall_thickness
wall_thickness = =line_width * 3
wall_thickness = =line_width * 4

4
resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg
View File

@ -13,8 +13,8 @@ weight = -1
[values]
brim_replaces_support = False
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

4
resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg
View File

@ -13,8 +13,8 @@ weight = 0
[values]
brim_replaces_support = False
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

4
resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg
View File

@ -13,8 +13,8 @@ weight = -2
[values]
brim_replaces_support = False
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature + 5

4
resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg
View File

@ -14,8 +14,8 @@ weight = -3
[values]
brim_replaces_support = False
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature + 5

4
resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg
View File

@ -14,9 +14,9 @@ weight = 1
[values]
acceleration_prime_tower = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
material_print_temperature = =default_material_print_temperature - 5
minimum_support_area = 4

4
resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg
View File

@ -14,9 +14,9 @@ weight = -1
[values]
acceleration_prime_tower = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
minimum_support_area = 4
retraction_count_max = 5

4
resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg
View File

@ -14,9 +14,9 @@ weight = 0
[values]
acceleration_prime_tower = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
material_print_temperature = =default_material_print_temperature - 5
minimum_support_area = 4

4
resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg
View File

@ -14,9 +14,9 @@ weight = -2
[values]
acceleration_prime_tower = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
material_print_temperature = =default_material_print_temperature + 5
minimum_support_area = 4

4
resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg
View File

@ -15,9 +15,9 @@ weight = -3
[values]
acceleration_prime_tower = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
material_print_temperature = =default_material_print_temperature - 5
minimum_support_area = 4

4
resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg
View File

@ -14,9 +14,9 @@ weight = -2
[values]
acceleration_prime_tower = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
minimum_support_area = 4
retraction_count_max = 5

4
resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg
View File

@ -14,9 +14,9 @@ weight = -3
[values]
acceleration_prime_tower = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
material_print_temperature = =default_material_print_temperature + 5
minimum_support_area = 4

4
resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg
View File

@ -14,9 +14,9 @@ weight = -4
[values]
acceleration_prime_tower = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
material_print_temperature = =default_material_print_temperature + 5
minimum_support_area = 4

4
resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg
View File

@ -13,8 +13,8 @@ weight = -1
[values]
brim_replaces_support = False
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

4
resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg
View File

@ -13,8 +13,8 @@ weight = 0
[values]
brim_replaces_support = False
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

4
resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg
View File

@ -13,8 +13,8 @@ weight = -2
[values]
brim_replaces_support = False
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature + 5

4
resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg
View File

@ -14,8 +14,8 @@ weight = -3
[values]
brim_replaces_support = False
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature + 5

4
resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg
View File

@ -14,9 +14,9 @@ weight = 1
[values]
acceleration_prime_tower = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
material_print_temperature = =default_material_print_temperature - 5
minimum_support_area = 4

4
resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg
View File

@ -14,9 +14,9 @@ weight = -1
[values]
acceleration_prime_tower = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
minimum_support_area = 4
retraction_count_max = 5

4
resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg
View File

@ -14,9 +14,9 @@ weight = 0
[values]
acceleration_prime_tower = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
material_print_temperature = =default_material_print_temperature - 5
minimum_support_area = 4

4
resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg
View File

@ -14,9 +14,9 @@ weight = -2
[values]
acceleration_prime_tower = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
material_print_temperature = =default_material_print_temperature + 5
minimum_support_area = 4

4
resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg
View File

@ -15,9 +15,9 @@ weight = -3
[values]
acceleration_prime_tower = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
material_print_temperature = =default_material_print_temperature - 5
minimum_support_area = 4

4
resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.2mm.inst.cfg
View File

@ -14,9 +14,9 @@ weight = -2
[values]
acceleration_prime_tower = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
minimum_support_area = 4
retraction_count_max = 5

4
resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.3mm.inst.cfg
View File

@ -14,9 +14,9 @@ weight = -3
[values]
acceleration_prime_tower = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
material_print_temperature = =default_material_print_temperature + 5
minimum_support_area = 4

4
resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.4mm.inst.cfg
View File

@ -14,9 +14,9 @@ weight = -4
[values]
acceleration_prime_tower = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
material_print_temperature = =default_material_print_temperature + 5
minimum_support_area = 4

6
resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_pla_0.2mm.inst.cfg
View File

@ -14,9 +14,13 @@ weight = -2
[values]
bridge_skin_material_flow = 200
bridge_wall_material_flow = 200
infill_wall_line_count = 1
material_final_print_temperature = =material_print_temperature - 15
material_initial_print_temperature = =material_print_temperature - 15
retraction_prime_speed = =retraction_speed
retraction_prime_speed = 35
skin_edge_support_thickness = =layer_height*2
speed_print = 125
speed_wall = 100
support_interface_enable = False
support_structure = tree

6
resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_pla_0.3mm.inst.cfg
View File

@ -14,10 +14,14 @@ weight = -3
[values]
bridge_skin_material_flow = 200
bridge_wall_material_flow = 200
infill_wall_line_count = 1
material_final_print_temperature = =material_print_temperature - 15
material_initial_print_temperature = =material_print_temperature - 15
material_print_temperature = =default_material_print_temperature + 20
retraction_prime_speed = =retraction_speed
retraction_prime_speed = 35
skin_edge_support_thickness = =layer_height*2
speed_print = 125
speed_wall = 100
support_interface_enable = False
support_structure = tree
wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)

4
resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.15mm.inst.cfg
View File

@ -13,8 +13,8 @@ weight = -1
[values]
brim_replaces_support = False
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

4
resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.1mm.inst.cfg
View File

@ -13,8 +13,8 @@ weight = 0
[values]
brim_replaces_support = False
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

4
resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.2mm.inst.cfg
View File

@ -13,8 +13,8 @@ weight = -2
[values]
brim_replaces_support = False
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature + 5

4
resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.3mm.inst.cfg
View File

@ -13,8 +13,8 @@ weight = -3
[values]
brim_replaces_support = False
build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 24
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature + 5

6
resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.15mm.inst.cfg
View File

@ -15,12 +15,14 @@ weight = -1
acceleration_prime_tower = 1500
acceleration_support = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
jerk_prime_tower = 4000
jerk_support = 4000
material_final_print_temperature = =material_print_temperature - 15
material_initial_print_temperature = =material_print_temperature - 10
minimum_support_area = 4
prime_tower_min_volume = 20
retraction_amount = 6.5

6
resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.1mm.inst.cfg
View File

@ -15,12 +15,14 @@ weight = 0
acceleration_prime_tower = 1500
acceleration_support = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
jerk_prime_tower = 4000
jerk_support = 4000
material_final_print_temperature = =material_print_temperature - 15
material_initial_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature - 5
minimum_support_area = 4
prime_tower_min_volume = 20

6
resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.2mm.inst.cfg
View File

@ -15,12 +15,14 @@ weight = -2
acceleration_prime_tower = 1500
acceleration_support = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
jerk_prime_tower = 4000
jerk_support = 4000
material_final_print_temperature = =material_print_temperature - 15
material_initial_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature + 5
minimum_support_area = 4
prime_tower_min_volume = 20

6
resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.3mm.inst.cfg
View File

@ -15,12 +15,14 @@ weight = -3
acceleration_prime_tower = 1500
acceleration_support = 1500
brim_replaces_support = False
build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 35
cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr!=support_extruder_nr) else 60
initial_layer_line_width_factor = 150
jerk_prime_tower = 4000
jerk_support = 4000
material_final_print_temperature = =material_print_temperature - 15
material_initial_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature - 5
minimum_support_area = 4
prime_tower_min_volume = 20

1
resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm.inst.cfg
View File

@ -12,6 +12,7 @@ variant = CC+ 0.4
weight = -2
[values]
adhesion_type = brim
material_alternate_walls = True
material_final_print_temperature = =material_print_temperature - 15
material_initial_print_temperature = =material_print_temperature - 15

1
resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm.inst.cfg
View File

@ -12,6 +12,7 @@ variant = CC+ 0.4
weight = -2
[values]
adhesion_type = brim
cool_min_layer_time = 6
cool_min_layer_time_fan_speed_max = 12
inset_direction = inside_out

17
resources/variants/ultimaker_s6_aa_plus06.inst.cfg
View File

@ -1,17 +0,0 @@
[general]
definition = ultimaker_s6
name = AA+ 0.6
version = 4
[metadata]
hardware_type = nozzle
setting_version = 25
type = variant
[values]
machine_nozzle_cool_down_speed = 0.9
machine_nozzle_id = AA+ 0.6
machine_nozzle_size = 0.6
machine_nozzle_tip_outer_diameter = 1.2
retraction_prime_speed = =retraction_speed

17
resources/variants/ultimaker_s8_aa_plus06.inst.cfg
View File

@ -1,17 +0,0 @@
[general]
definition = ultimaker_s8
name = AA+ 0.6
version = 4
[metadata]
hardware_type = nozzle
setting_version = 25
type = variant
[values]
machine_nozzle_cool_down_speed = 0.9
machine_nozzle_id = AA+ 0.6
machine_nozzle_size = 0.6
machine_nozzle_tip_outer_diameter = 1.2
retraction_prime_speed = =retraction_speed