diff --git a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_draft.inst.cfg b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_draft.inst.cfg
index 05d272f5a2..52b57f65b9 100644
--- a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_draft.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_draft.inst.cfg
@@ -13,7 +13,7 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-support_pattern = everywhere
+support_pattern = grid
 support_infill_rate = 50
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_efine.inst.cfg b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_efine.inst.cfg
index 2e84b49c07..8958e9c4a2 100644
--- a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_efine.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_efine.inst.cfg
@@ -13,7 +13,7 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-support_pattern = everywhere
+support_pattern = grid
 support_infill_rate = 50
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_fine.inst.cfg b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_fine.inst.cfg
index 4730f8a89c..dae9ff6d40 100644
--- a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_fine.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_fine.inst.cfg
@@ -13,7 +13,7 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-support_pattern = everywhere
+support_pattern = grid
 support_infill_rate = 50
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_standard.inst.cfg b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_standard.inst.cfg
index e18764d2d8..c8a6ab287e 100644
--- a/resources/quality/goofoo/pva/goofoo_far_0.40_pva_standard.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_far_0.40_pva_standard.inst.cfg
@@ -13,7 +13,7 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-support_pattern = everywhere
+support_pattern = grid
 support_infill_rate = 50
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_draft.inst.cfg b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_draft.inst.cfg
index 89c30d87cd..7bbe273435 100644
--- a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_draft.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_draft.inst.cfg
@@ -13,7 +13,7 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-support_pattern = everywhere
+support_pattern = grid
 support_infill_rate = 50
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_efine.inst.cfg b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_efine.inst.cfg
index c227c2c731..4af057c98c 100644
--- a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_efine.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_efine.inst.cfg
@@ -13,7 +13,7 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-support_pattern = everywhere
+support_pattern = grid
 support_infill_rate = 50
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_fine.inst.cfg b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_fine.inst.cfg
index 69c7e3c43c..0d42f6fece 100644
--- a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_fine.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_fine.inst.cfg
@@ -13,7 +13,7 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-support_pattern = everywhere
+support_pattern = grid
 support_infill_rate = 50
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_standard.inst.cfg b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_standard.inst.cfg
index 3fe22dbb0a..c6a5522e78 100644
--- a/resources/quality/goofoo/pva/goofoo_near_0.40_pva_standard.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_near_0.40_pva_standard.inst.cfg
@@ -13,7 +13,7 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-support_pattern = everywhere
+support_pattern = grid
 support_infill_rate = 50
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/goofoo/pva/goofoo_open_0.40_pva_draft.inst.cfg b/resources/quality/goofoo/pva/goofoo_open_0.40_pva_draft.inst.cfg
index 15dc4e9946..20d31c5d3a 100644
--- a/resources/quality/goofoo/pva/goofoo_open_0.40_pva_draft.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_open_0.40_pva_draft.inst.cfg
@@ -13,7 +13,7 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-support_pattern = everywhere
+support_pattern = grid
 support_infill_rate = 50
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/goofoo/pva/goofoo_open_0.40_pva_efine.inst.cfg b/resources/quality/goofoo/pva/goofoo_open_0.40_pva_efine.inst.cfg
index 056c1754ba..0a5e9ad056 100644
--- a/resources/quality/goofoo/pva/goofoo_open_0.40_pva_efine.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_open_0.40_pva_efine.inst.cfg
@@ -13,7 +13,7 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-support_pattern = everywhere
+support_pattern = grid
 support_infill_rate = 50
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/goofoo/pva/goofoo_open_0.40_pva_fine.inst.cfg b/resources/quality/goofoo/pva/goofoo_open_0.40_pva_fine.inst.cfg
index 4bf6c4c77e..f1bb2a1fd0 100644
--- a/resources/quality/goofoo/pva/goofoo_open_0.40_pva_fine.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_open_0.40_pva_fine.inst.cfg
@@ -13,7 +13,7 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-support_pattern = everywhere
+support_pattern = grid
 support_infill_rate = 50
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/goofoo/pva/goofoo_open_0.40_pva_standard.inst.cfg b/resources/quality/goofoo/pva/goofoo_open_0.40_pva_standard.inst.cfg
index bbdf8d5232..36026762ee 100644
--- a/resources/quality/goofoo/pva/goofoo_open_0.40_pva_standard.inst.cfg
+++ b/resources/quality/goofoo/pva/goofoo_open_0.40_pva_standard.inst.cfg
@@ -13,7 +13,7 @@ variant = 0.4mm Nozzle
 [values]
 wall_thickness = =line_width*2
 adhesion_type = none
-support_pattern = everywhere
+support_pattern = grid
 support_infill_rate = 50
 support_brim_enable = True
 support_interface_enable = True