From be2a802aa2d3b808184d57de5189f5380747e295 Mon Sep 17 00:00:00 2001 From: Jack Ha Date: Thu, 24 Nov 2016 17:05:06 +0100 Subject: [PATCH] Changed ultimaker3 def so relations are retained. --- resources/definitions/ultimaker3.def.json | 2 +- resources/variants/ultimaker3_aa04.inst.cfg | 1 - resources/variants/ultimaker3_bb04.inst.cfg | 1 + 3 files changed, 2 insertions(+), 2 deletions(-) diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index 243cf58a8b..9465cd062a 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -128,7 +128,7 @@ "retraction_min_travel": { "value": "5" }, "retraction_prime_speed": { "value": "15" }, "skin_overlap": { "value": "10" }, - "speed_layer_0": { "value": "20" }, + "speed_layer_0": { "value": "speed_print * 30 / 70" }, "speed_prime_tower": { "value": "speed_topbottom" }, "speed_print": { "value": "35" }, "speed_support": { "value": "speed_wall_0" }, diff --git a/resources/variants/ultimaker3_aa04.inst.cfg b/resources/variants/ultimaker3_aa04.inst.cfg index 41967739b4..c8d5b8aceb 100644 --- a/resources/variants/ultimaker3_aa04.inst.cfg +++ b/resources/variants/ultimaker3_aa04.inst.cfg @@ -28,7 +28,6 @@ retraction_min_travel = =line_width * 2 retraction_prime_speed = =retraction_speed skin_overlap = 15 speed_print = 70 -speed_layer_0 = =speed_print * 30 / 70 speed_topbottom = =math.ceil(speed_print * 30 / 70) speed_wall = =math.ceil(speed_print * 30 / 70) support_angle = 60 diff --git a/resources/variants/ultimaker3_bb04.inst.cfg b/resources/variants/ultimaker3_bb04.inst.cfg index 80e6b309a4..94069901cf 100644 --- a/resources/variants/ultimaker3_bb04.inst.cfg +++ b/resources/variants/ultimaker3_bb04.inst.cfg @@ -12,6 +12,7 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_heat_up_speed = 1.5 material_print_temperature = 215 retraction_extrusion_window = =retraction_amount +speed_layer_0 = 20 speed_wall_0 = =math.ceil(speed_wall * 25 / 30) support_bottom_height = =layer_height * 2 support_bottom_stair_step_height = =layer_height