From cc693a88048d98445d732f78d2e2a486da6963e6 Mon Sep 17 00:00:00 2001 From: KOUBeMT <51325289+KOUBeMT@users.noreply.github.com> Date: Wed, 5 Jun 2019 15:04:18 +0200 Subject: [PATCH 01/11] First_Strateo3D_commit --- resources/definitions/strateo3d.def.json | 136 ++++++++++++++++++ .../strateo3d_left_extruder.def.json | 17 +++ .../strateo3d_right_extruder.def.json | 17 +++ .../Standard_0.4/s3d_std0.4_ABS_A.inst.cfg | 48 +++++++ .../Standard_0.4/s3d_std0.4_ABS_B.inst.cfg | 48 +++++++ .../Standard_0.4/s3d_std0.4_ABS_C.inst.cfg | 48 +++++++ .../Standard_0.4/s3d_std0.4_PETG_A.inst.cfg | 48 +++++++ .../Standard_0.4/s3d_std0.4_PETG_B.inst.cfg | 48 +++++++ .../Standard_0.4/s3d_std0.4_PETG_C.inst.cfg | 48 +++++++ .../Standard_0.4/s3d_std0.4_PLA_A.inst.cfg | 48 +++++++ .../Standard_0.4/s3d_std0.4_PLA_B.inst.cfg | 48 +++++++ .../Standard_0.4/s3d_std0.4_PLA_C.inst.cfg | 48 +++++++ .../Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg | 49 +++++++ .../Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg | 49 +++++++ .../Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg | 49 +++++++ .../s3d_std0.4_PVA-OKS_A.inst.cfg | 49 +++++++ .../s3d_std0.4_PVA-OKS_B.inst.cfg | 49 +++++++ .../s3d_std0.4_PVA-OKS_C.inst.cfg | 49 +++++++ .../Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg | 49 +++++++ .../Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg | 49 +++++++ .../Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg | 49 +++++++ .../Standard_0.4/s3d_std0.4_TPU98A_A.inst.cfg | 48 +++++++ .../Standard_0.4/s3d_std0.4_TPU98A_B.inst.cfg | 48 +++++++ .../Standard_0.4/s3d_std0.4_TPU98A_C.inst.cfg | 48 +++++++ .../Standard_0.6/s3d_std0.6_ABS_B.inst.cfg | 48 +++++++ .../Standard_0.6/s3d_std0.6_ABS_C.inst.cfg | 48 +++++++ .../Standard_0.6/s3d_std0.6_ABS_D.inst.cfg | 48 +++++++ .../Standard_0.6/s3d_std0.6_ASA-X_B.inst.cfg | 48 +++++++ .../Standard_0.6/s3d_std0.6_ASA-X_C.inst.cfg | 48 +++++++ .../Standard_0.6/s3d_std0.6_ASA-X_D.inst.cfg | 48 +++++++ .../s3d_std0.6_Nylon-1030_C.inst.cfg | 48 +++++++ .../Standard_0.6/s3d_std0.6_PETG_B.inst.cfg | 48 +++++++ .../Standard_0.6/s3d_std0.6_PETG_C.inst.cfg | 48 +++++++ .../Standard_0.6/s3d_std0.6_PETG_D.inst.cfg | 48 +++++++ .../Standard_0.6/s3d_std0.6_PLA_B.inst.cfg | 48 +++++++ .../Standard_0.6/s3d_std0.6_PLA_C.inst.cfg | 48 +++++++ .../Standard_0.6/s3d_std0.6_PLA_D.inst.cfg | 48 +++++++ .../Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg | 49 +++++++ .../Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg | 49 +++++++ .../Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg | 49 +++++++ .../s3d_std0.6_PVA-OKS_B.inst.cfg | 49 +++++++ .../s3d_std0.6_PVA-OKS_C.inst.cfg | 49 +++++++ .../s3d_std0.6_PVA-OKS_D.inst.cfg | 49 +++++++ .../Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg | 49 +++++++ .../Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg | 49 +++++++ .../Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg | 49 +++++++ .../Standard_0.6/s3d_std0.6_TPU98A_B.inst.cfg | 49 +++++++ .../Standard_0.6/s3d_std0.6_TPU98A_C.inst.cfg | 49 +++++++ .../Standard_0.6/s3d_std0.6_TPU98A_D.inst.cfg | 48 +++++++ .../Standard_0.8/s3d_std0.8_ABS_C.inst.cfg | 48 +++++++ .../Standard_0.8/s3d_std0.8_ABS_D.inst.cfg | 48 +++++++ .../Standard_0.8/s3d_std0.8_ABS_E.inst.cfg | 48 +++++++ .../Standard_0.8/s3d_std0.8_PETG_C.inst.cfg | 48 +++++++ .../Standard_0.8/s3d_std0.8_PETG_D.inst.cfg | 48 +++++++ .../Standard_0.8/s3d_std0.8_PETG_E.inst.cfg | 48 +++++++ .../Standard_0.8/s3d_std0.8_PLA_C.inst.cfg | 48 +++++++ .../Standard_0.8/s3d_std0.8_PLA_D.inst.cfg | 48 +++++++ .../Standard_0.8/s3d_std0.8_PLA_E.inst.cfg | 48 +++++++ .../s3d_std0.8_PVA-OKS_C.inst.cfg | 49 +++++++ .../s3d_std0.8_PVA-OKS_D.inst.cfg | 49 +++++++ .../s3d_std0.8_PVA-OKS_E.inst.cfg | 49 +++++++ .../Standard_0.8/s3d_std0.8_TPU_C.inst.cfg | 48 +++++++ .../Standard_0.8/s3d_std0.8_TPU_D.inst.cfg | 48 +++++++ .../Standard_0.8/s3d_std0.8_TPU_E.inst.cfg | 48 +++++++ .../Standard_1.2/s3d_std1.2_PLA_H.inst.cfg | 48 +++++++ .../quality/strateo3d/s3d_global_A.inst.cfg | 14 ++ .../quality/strateo3d/s3d_global_B.inst.cfg | 14 ++ .../quality/strateo3d/s3d_global_C.inst.cfg | 14 ++ .../quality/strateo3d/s3d_global_D.inst.cfg | 14 ++ .../quality/strateo3d/s3d_global_E.inst.cfg | 14 ++ .../quality/strateo3d/s3d_global_F.inst.cfg | 14 ++ .../quality/strateo3d/s3d_global_G.inst.cfg | 14 ++ .../quality/strateo3d/s3d_global_H.inst.cfg | 14 ++ .../variants/strateo3d_standard_04.inst.cfg | 21 +++ .../variants/strateo3d_standard_06.inst.cfg | 21 +++ 75 files changed, 3323 insertions(+) create mode 100644 resources/definitions/strateo3d.def.json create mode 100644 resources/extruders/strateo3d_left_extruder.def.json create mode 100644 resources/extruders/strateo3d_right_extruder.def.json create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_A.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_B.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_A.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_B.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_B.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_D.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_Nylon-1030_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_B.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_D.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_B.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_D.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_B.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_D.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_D.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_E.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_D.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_E.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_C.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_D.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_E.inst.cfg create mode 100644 resources/quality/strateo3d/Standard_1.2/s3d_std1.2_PLA_H.inst.cfg create mode 100644 resources/quality/strateo3d/s3d_global_A.inst.cfg create mode 100644 resources/quality/strateo3d/s3d_global_B.inst.cfg create mode 100644 resources/quality/strateo3d/s3d_global_C.inst.cfg create mode 100644 resources/quality/strateo3d/s3d_global_D.inst.cfg create mode 100644 resources/quality/strateo3d/s3d_global_E.inst.cfg create mode 100644 resources/quality/strateo3d/s3d_global_F.inst.cfg create mode 100644 resources/quality/strateo3d/s3d_global_G.inst.cfg create mode 100644 resources/quality/strateo3d/s3d_global_H.inst.cfg create mode 100644 resources/variants/strateo3d_standard_04.inst.cfg create mode 100644 resources/variants/strateo3d_standard_06.inst.cfg diff --git a/resources/definitions/strateo3d.def.json b/resources/definitions/strateo3d.def.json new file mode 100644 index 0000000000..46c193569d --- /dev/null +++ b/resources/definitions/strateo3d.def.json @@ -0,0 +1,136 @@ +{ + "version": 2, + "name": "Strateo3D", + "inherits": "fdmprinter", + "metadata": { + "author": "M.K", + "manufacturer": "eMotionTech", + "category": "Other", + "visible": true, + "file_formats": "text/x-gcode", + "has_machine_quality": true, + "has_materials": true, + "has_machine_materials": true, + "has_variants": true, + "preferred_variant_name": "Standard 0.6", + "preferred_quality_type": "e", + "variants_name": "Print Head", + "machine_extruder_trains": + { + "0": "strateo3d_right_extruder", + "1": "strateo3d_left_extruder" + } + + }, + + "overrides": { + "machine_name": { "default_value": "Strateo3D" }, + "machine_width": { "default_value": 600 }, + "machine_depth": { "default_value": 420 }, + "machine_height": { "default_value": 495 }, + "machine_heated_bed": { "default_value": true }, + "machine_center_is_zero": { "default_value": false }, + "machine_head_with_fans_polygon": { "default_value": [ [ -76, -51.8 ] , [ 25, -51.8 ] , [ 25, 38.2 ] , [ -76, 38.2 ] ] }, + "gantry_height": { "default_value": 40 }, + "machine_extruder_count": { "default_value": 2 }, + "machine_gcode_flavor": { "default_value": "Marlin" }, + "machine_start_gcode": { "default_value": "G28 \nG90 G1 X300 Y210 Z15 F6000 \nG92 E0" }, + "machine_end_gcode": { "default_value": "T1 \nM104 S0 \nT0 \nM104 S0 \nM140 S0 \nM141 S0 \nG91 \nG0 E-1 F1500 \nG0 z1 \nG90 \nG28 \nM801.2 \nM801.0 \nM84" }, + "extruder_prime_pos_y": {"minimum_value": "0", "maximum_value": "machine_depth"}, + "extruder_prime_pos_x": {"minimum_value": "0", "maximum_value": "machine_width"}, + "machine_heat_zone_length": { "default_value": 7 }, + "default_material_print_temperature": { "maximum_value_warning": "350" }, + "material_print_temperature": { "maximum_value_warning": "350" }, + "material_print_temperature_layer_0": { "maximum_value_warning": "350" }, + "material_bed_temperature": { "maximum_value": "130" }, + "material_bed_temperature_layer_0": { "maximum_value": "130" }, + "extruder_prime_pos_abs": { "default_value": true }, + "machine_acceleration": { "default_value": 2000 }, + + "acceleration_enabled": { "value": false }, + "acceleration_layer_0": { "value": "acceleration_topbottom" }, + "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 1000 / 2000)" }, + "acceleration_print": { "value": "2000" }, + "acceleration_support": { "value": "acceleration_print" }, + "acceleration_support_interface": { "value": "acceleration_topbottom" }, + "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 1000 / 2000)" }, + "acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 2000)" }, + "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1500)" }, + "adaptive_layer_height_variation": { "default_value": 0.1 }, + "adaptive_layer_height_variation_step": { "default_value": 0.05 }, + "adhesion_type": { "default_value": "skirt" }, + "expand_skins_expand_distance": { "value": "wall_line_width_0 + wall_line_count * wall_line_width_x" }, + "gradual_infill_step_height": { "value": "layer_height*10" }, + "gradual_support_infill_step_height": { "value": "layer_height*7" }, + "infill_before_walls": { "default_value": false }, + "infill_overlap": { "value": "0" }, + "infill_wipe_dist": { "value": "0" }, + "jerk_enabled": { "value": "False" }, + "jerk_layer_0": { "value": "jerk_topbottom" }, + "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" }, + "jerk_print": { "value": "25" }, + "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" }, + "jerk_support_interface": { "value": "jerk_topbottom" }, + "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" }, + "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" }, + "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" }, + "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, + "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, + "machine_min_cool_heat_time_window": { "value": "15" }, + "machine_nozzle_cool_down_speed": { "default_value": 0.50 }, + "machine_nozzle_heat_up_speed": { "default_value": 2.25 }, + "material_final_print_temperature": { "value": "material_print_temperature - 10" }, + "material_flow": { "default_value": 93 }, + "material_flow_layer_0": { "value": "math.ceil(material_flow*1)" }, + "material_initial_print_temperature": { "value": "material_print_temperature - 5" }, + "meshfix_maximum_resolution": { "value": "0.03" }, + "optimize_wall_printing_order": { "value": "True" }, + "prime_blob_enable": { "enabled": false, "default_value": false }, + "prime_tower_min_volume": { "default_value": 35 }, + "prime_tower_position_x": { "value": "machine_width/2 - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" }, + "prime_tower_position_y": { "value": "machine_depth - prime_tower_size - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" }, + "retraction_amount": { "default_value": 1.5 }, + "retraction_combing": { "default_value": "all" }, + "retraction_combing_max_distance": { "default_value": 5 }, + "retraction_count_max": { "default_value": 15 }, + "retraction_hop": { "value": "2" }, + "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, + "retraction_hop_only_when_collides": { "value": "True" }, + "retraction_min_travel": { "value": "3*line_width" }, + "retraction_prime_speed": { "value": "retraction_speed-10" }, + "retraction_speed": { "default_value": 25 }, + "skin_overlap": { "value": "10" }, + "skirt_brim_minimal_length": { "default_value": 333 }, + "speed_layer_0": { "value": "20" }, + "speed_travel_layer_0": { "value": "100" }, + "speed_prime_tower": { "value": "speed_topbottom" }, + "speed_print": { "value": "50" }, + "speed_support": { "value": "speed_wall" }, + "speed_support_interface": { "value": "speed_topbottom" }, + "speed_topbottom": { "value": "math.ceil(speed_print * 20/35)" }, + "speed_travel": { "value": "150" }, + "speed_wall": { "value": "math.ceil(speed_print * 3/4)" }, + "speed_wall_0": { "value": "math.ceil(speed_wall * 2/3)" }, + "speed_wall_x": { "value": "speed_wall" }, + "support_angle": { "value": "50" }, + "support_bottom_distance": {"value": "extruderValue(support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr, 'support_z_distance/2') if support_type == 'everywhere' else 0", "maximum_value_warning": "machine_nozzle_size*1.5" }, + "support_interface_enable": { "default_value": true }, + "support_interface_height": { "value": "layer_height*3" }, + "support_interface_offset": { "value": "support_offset" }, + "support_top_distance": {"value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance')", "maximum_value_warning": "machine_nozzle_size*1.5" }, + "support_use_towers": { "default_value": true }, + "support_xy_distance": { "value": "line_width * 1.7" }, + "support_xy_distance_overhang": { "value": "wall_line_width_0" }, + "support_z_distance": { "value": "layer_height*2", "maximum_value_warning": "machine_nozzle_size*1.5" }, + "switch_extruder_prime_speed": { "value": "retraction_prime_speed" }, + "switch_extruder_retraction_amount": { "value": "7" }, + "switch_extruder_retraction_speeds": {"value": "retraction_retract_speed"}, + "top_bottom_thickness": { "value": "3*layer_height", "minimum_value_warning": "layer_height*2" }, + "top_thickness": { "value": "top_bottom_thickness" }, + "top_layers": { "value": "0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))"}, + "bottom_thickness": { "value": "top_bottom_thickness-2*layer_height+layer_height_0" }, + "bottom_layers": { "value": "999999 if infill_sparse_density == 100 else math.ceil(round(((bottom_thickness-resolveOrValue('layer_height_0')) / resolveOrValue('layer_height'))+1, 4))"}, + "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, + "wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" } + } +} \ No newline at end of file diff --git a/resources/extruders/strateo3d_left_extruder.def.json b/resources/extruders/strateo3d_left_extruder.def.json new file mode 100644 index 0000000000..2d6221ff22 --- /dev/null +++ b/resources/extruders/strateo3d_left_extruder.def.json @@ -0,0 +1,17 @@ +{ + "id": "strateo3d_left_extruder", + "version": 2, + "name": "Left Extruder", + "inherits": "fdmextruder", + "metadata": { + "machine": "strateo3d", + "position": "1" + }, + + "overrides": { + "extruder_nr": { "default_value": 1, "maximum_value": "1" }, + "material_diameter": { "default_value": 1.75 }, + "machine_nozzle_offset_x": { "default_value": 0 }, + "machine_nozzle_offset_y": { "default_value": 0 } + } +} diff --git a/resources/extruders/strateo3d_right_extruder.def.json b/resources/extruders/strateo3d_right_extruder.def.json new file mode 100644 index 0000000000..d64a562a34 --- /dev/null +++ b/resources/extruders/strateo3d_right_extruder.def.json @@ -0,0 +1,17 @@ +{ + "id": "strateo3d_right_extruder", + "version": 2, + "name": "Right Extruder", + "inherits": "fdmextruder", + "metadata": { + "machine": "strateo3d", + "position": "0" + }, + + "overrides": { + "extruder_nr": { "default_value": 0, "maximum_value": "1" }, + "material_diameter": { "default_value": 1.75 }, + "machine_nozzle_offset_x": { "default_value": 0 }, + "machine_nozzle_offset_y": { "default_value": 0 } + } +} diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg new file mode 100644 index 0000000000..80021c8f83 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = A +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = a +weight = 1 +material = generic_abs +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.5 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 55 +speed_wall = =math.ceil(speed_print * 40/55) +speed_wall_0 = =math.ceil(speed_wall * 25/40) +speed_topbottom = =math.ceil(speed_print * 35/55) +speed_layer_0 = =math.ceil(speed_print * 20/55) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 35 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 6 * layer_height +cool_min_speed = 10 +support_angle = 65 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 97 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 10 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg new file mode 100644 index 0000000000..9f298125f4 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = b +weight = 0 +material = generic_abs +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.5 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 60 +speed_wall = =math.ceil(speed_print * 43/60) +speed_wall_0 = =math.ceil(speed_wall * 27/43) +speed_topbottom = =math.ceil(speed_print * 37/60) +speed_layer_0 = =math.ceil(speed_print * 25/60) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 35 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_min_speed = 10 +support_angle = 60 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 97 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 15 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg new file mode 100644 index 0000000000..37b9352ace --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = -1 +material = generic_abs +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.5 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 65 +speed_wall = =math.ceil(speed_print * 45/65) +speed_wall_0 = =math.ceil(speed_wall * 30/45) +speed_topbottom = =math.ceil(speed_print * 40/65) +speed_layer_0 = =math.ceil(speed_print * 30/65) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 35 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 6 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature_layer_0 = =default_material_print_temperature +5 +material_flow = 97 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 20 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_A.inst.cfg new file mode 100644 index 0000000000..5380a4850f --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_A.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = A +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = a +weight = 1 +material = generic_petg +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 55 +speed_wall = =math.ceil(speed_print * 40/55) +speed_wall_0 = =math.ceil(speed_wall * 25/40) +speed_topbottom = =math.ceil(speed_print * 35/55) +speed_layer_0 = =math.ceil(speed_print * 20/55) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 3 * layer_height +cool_min_speed = 10 +support_angle = 65 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 91 +retraction_extra_prime_amount = 0 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 10 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_B.inst.cfg new file mode 100644 index 0000000000..86dfb3ef46 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_B.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = b +weight = 0 +material = generic_petg +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 60 +speed_wall = =math.ceil(speed_print * 43/60) +speed_wall_0 = =math.ceil(speed_wall * 27/43) +speed_topbottom = =math.ceil(speed_print * 37/60) +speed_layer_0 = =math.ceil(speed_print * 25/60) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 3 * layer_height +cool_min_speed = 10 +support_angle = 60 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 91 +retraction_extra_prime_amount = 0 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 15 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_C.inst.cfg new file mode 100644 index 0000000000..b3ed16bb75 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_C.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = -1 +material = generic_petg +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 65 +speed_wall = =math.ceil(speed_print * 45/65) +speed_wall_0 = =math.ceil(speed_wall * 30/45) +speed_topbottom = =math.ceil(speed_print * 40/65) +speed_layer_0 = =math.ceil(speed_print * 30/65) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 3 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature_layer_0 = =default_material_print_temperature +5 +material_flow = 91 +retraction_extra_prime_amount = 0 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 20 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg new file mode 100644 index 0000000000..aaaa5f4142 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = A +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = a +weight = 1 +material = generic_pla +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.43 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 55 +speed_wall = =math.ceil(speed_print * 40/55) +speed_wall_0 = =math.ceil(speed_wall * 25/40) +speed_topbottom = =math.ceil(speed_print * 35/55) +speed_layer_0 = =math.ceil(speed_print * 20/55) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_min_speed = 10 +support_angle = 65 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 97 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 10 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg new file mode 100644 index 0000000000..363fd45113 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = b +weight = 0 +material = generic_pla +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.43 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 60 +speed_wall = =math.ceil(speed_print * 43/60) +speed_wall_0 = =math.ceil(speed_wall * 27/43) +speed_topbottom = =math.ceil(speed_print * 37/60) +speed_layer_0 = =math.ceil(speed_print * 25/60) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_min_speed = 10 +support_angle = 60 +material_print_temperature = =default_material_print_temperature + 3 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 97 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 15 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg new file mode 100644 index 0000000000..16ddf51744 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = -1 +material = generic_pla +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.43 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 65 +speed_wall = =math.ceil(speed_print * 45/65) +speed_wall_0 = =math.ceil(speed_wall * 30/45) +speed_topbottom = =math.ceil(speed_print * 40/65) +speed_layer_0 = =math.ceil(speed_print * 30/65) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature +5 +material_print_temperature_layer_0 = =default_material_print_temperature +3 +material_flow = 97 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 20 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg new file mode 100644 index 0000000000..5a7f160aff --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg @@ -0,0 +1,49 @@ + [general] +version = 4 +name = A +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = a +weight = 1 +material = emotiontech_pva-m +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 65 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 10 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width*3/4 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 3 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg new file mode 100644 index 0000000000..87a0a94109 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = b +weight = 0 +material = emotiontech_pva-m +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 60 +material_print_temperature = =default_material_print_temperature + 3 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 15 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width*3/4 +support_xy_distance_overhang = ==line_width*0.175/line_width +support_offset = 3 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg new file mode 100644 index 0000000000..0137fa4570 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = -1 +material = emotiontech_pva-m +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 20 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width*3/4 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 3 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg new file mode 100644 index 0000000000..4a25700f16 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = A +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = a +weight = 1 +material = emotiontech_pva-oks +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 65 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 10 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width*3/4 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 3 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg new file mode 100644 index 0000000000..7ec05e2205 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = b +weight = 0 +material = emotiontech_pva-oks +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 60 +material_print_temperature = =default_material_print_temperature + 3 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 15 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width*3/4 +support_xy_distance_overhang = ==line_width*0.175/line_width +support_offset = 3 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg new file mode 100644 index 0000000000..1a0e6ee70f --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = -1 +material = emotiontech_pva-oks +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 20 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width*3/4 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 3 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg new file mode 100644 index 0000000000..b8f3efe568 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = A +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = a +weight = 1 +material = emotiontech_pva-s +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 65 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 10 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width*3/4 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 3 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg new file mode 100644 index 0000000000..8e660b7b74 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = b +weight = 0 +material = emotiontech_pva-s +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 60 +material_print_temperature = =default_material_print_temperature + 3 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 15 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width*3/4 +support_xy_distance_overhang = ==line_width*0.175/line_width +support_offset = 3 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg new file mode 100644 index 0000000000..a19f11225e --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = -1 +material = emotiontech_pva-s +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.35 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 20 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width*3/4 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 3 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_A.inst.cfg new file mode 100644 index 0000000000..604f73f67c --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_A.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = A +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = a +weight = 1 +material = emotiontech_tpu98a +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.38 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.38 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.38 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.38 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 30 +speed_wall = =math.ceil(speed_print * 30/30) +speed_wall_0 = =math.ceil(speed_print * 25/30) +speed_topbottom = =math.ceil(speed_print * 25/30) +speed_layer_0 = =math.ceil(speed_print * 20/30) +speed_slowdown_layers = 1 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 3 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 100 +retraction_extra_prime_amount = 0.2 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = False +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 2.5 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 0.5 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_B.inst.cfg new file mode 100644 index 0000000000..50d7007419 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_B.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = b +weight = 0 +material = emotiontech_tpu98a +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.38 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.38 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.38 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.38 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 35 +speed_wall = =math.ceil(speed_print * 35/35) +speed_wall_0 = =math.ceil(speed_print * 27/35) +speed_topbottom = =math.ceil(speed_print * 25/35) +speed_layer_0 = =math.ceil(speed_print * 20/35) +speed_slowdown_layers = 1 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 100 +retraction_extra_prime_amount = 0.2 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = False +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 2.5 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 0.5 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_C.inst.cfg new file mode 100644 index 0000000000..ac1e22489d --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_C.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = -1 +material = emotiontech_tpu98a +variant = Standard 0.4 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.38 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.38 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.38 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.38 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 40/40) +speed_wall_0 = =math.ceil(speed_print * 30/40) +speed_topbottom = =math.ceil(speed_print * 27/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 1 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 7 +material_print_temperature_layer_0 = =default_material_print_temperature + 3 +material_flow = 100 +retraction_extra_prime_amount = 0.2 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = False +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 2.5 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 0.5 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg new file mode 100644 index 0000000000..9ec3d02a87 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = b +weight = 1 +material = generic_abs +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.53 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.53 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 50 +speed_wall = =math.ceil(speed_print * 3/4) +speed_wall_0 = =math.ceil(speed_wall * 2/3) +speed_topbottom = =math.ceil(speed_print * 2/3) +speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 6 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg new file mode 100644 index 0000000000..ae8a264806 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = 0 +material = generic_abs +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.53 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.53 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 55 +speed_wall = =math.ceil(speed_print * 3/4) +speed_wall_0 = =math.ceil(speed_wall * 2/3) +speed_topbottom = =math.ceil(speed_print * 2/3) +speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 6 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg new file mode 100644 index 0000000000..6f43eebf5d --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = D +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = d +weight = -1 +material = generic_abs +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.53 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.53 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 60 +speed_wall = =math.ceil(speed_print * 3/4) +speed_wall_0 = =math.ceil(speed_wall * 2/3) +speed_topbottom = =math.ceil(speed_print * 2/3) +speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 6 * layer_height +cool_min_speed = 10 +support_angle = 45 +material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature_layer_0 = =default_material_print_temperature +5 +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_B.inst.cfg new file mode 100644 index 0000000000..d5a6e45963 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_B.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = b +weight = 1 +material = emotiontech_asax +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.53 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.53 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 55 +speed_wall = =math.ceil(speed_print * 3/4) +speed_wall_0 = =math.ceil(speed_wall * 2/3) +speed_topbottom = =math.ceil(speed_print * 2/3) +speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 3 * layer_height +cool_min_speed = 10 +support_angle = 60 +material_print_temperature = =default_material_print_temperature + 2 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_C.inst.cfg new file mode 100644 index 0000000000..47ec9e88e0 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_C.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = 0 +material = emotiontech_asax +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.53 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.53 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 60 +speed_wall = =math.ceil(speed_print * 3/4) +speed_wall_0 = =math.ceil(speed_wall * 2/3) +speed_topbottom = =math.ceil(speed_print * 2/3) +speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 3 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature + 2 +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_D.inst.cfg new file mode 100644 index 0000000000..3f9528cb4d --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_D.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = D +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = d +weight = -1 +material = emotiontech_asax +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.53 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.53 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 65 +speed_wall = =math.ceil(speed_print * 3/4) +speed_wall_0 = =math.ceil(speed_wall * 2/3) +speed_topbottom = =math.ceil(speed_print * 2/3) +speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 3 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 8 +material_print_temperature_layer_0 = =default_material_print_temperature + 5 +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_Nylon-1030_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_Nylon-1030_C.inst.cfg new file mode 100644 index 0000000000..16febe6cad --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_Nylon-1030_C.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = 0 +material = emotiontech_nylon_1030 +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.6 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 60 +speed_wall = =math.ceil(speed_print * 30/60) +speed_wall_0 = =math.ceil(speed_print * 23/60) +speed_topbottom = =math.ceil(speed_print * 30/60) +speed_layer_0 = =math.ceil(speed_print * 20/60) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 35 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 8 +material_print_temperature_layer_0 = =default_material_print_temperature + 3 +material_flow = 93 +retraction_extra_prime_amount = 0 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 30 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_B.inst.cfg new file mode 100644 index 0000000000..4d5d6f50e5 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_B.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = b +weight = 1 +material = generic_petg +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 45 +speed_wall = =math.ceil(speed_print * 3/4) +speed_wall_0 = =math.ceil(speed_wall * 2/3) +speed_topbottom = =math.ceil(speed_print * 2/3) +speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 70 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 3 * layer_height +cool_min_speed = 10 +support_angle = 60 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 87 +retraction_extra_prime_amount = 0 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_C.inst.cfg new file mode 100644 index 0000000000..47834bf58f --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_C.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = 0 +material = generic_petg +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 50 +speed_wall = =math.ceil(speed_print * 3/4) +speed_wall_0 = =math.ceil(speed_wall * 2/3) +speed_topbottom = =math.ceil(speed_print * 2/3) +speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 70 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 3 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 87 +retraction_extra_prime_amount = 0 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_D.inst.cfg new file mode 100644 index 0000000000..f3a1ee8335 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_D.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = D +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = d +weight = -1 +material = generic_petg +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 55 +speed_wall = =math.ceil(speed_print * 3/4) +speed_wall_0 = =math.ceil(speed_wall * 2/3) +speed_topbottom = =math.ceil(speed_print * 2/3) +speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 70 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 3 * layer_height +cool_min_speed = 10 +support_angle = 45 +material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature_layer_0 = =default_material_print_temperature +5 +material_flow = 87 +retraction_extra_prime_amount = 0 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_B.inst.cfg new file mode 100644 index 0000000000..9e1418e19b --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_B.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = b +weight = 1 +material = generic_pla +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.47 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.53 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.45 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 55 +speed_wall = =math.ceil(speed_print * 3/4) +speed_wall_0 = =math.ceil(speed_wall * 2/3) +speed_topbottom = =math.ceil(speed_print * 2/3) +speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_min_speed = 10 +support_angle = 60 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_C.inst.cfg new file mode 100644 index 0000000000..900b35a677 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_C.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = 0 +material = generic_pla +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.47 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.53 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.45 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 60 +speed_wall = =math.ceil(speed_print * 3/4) +speed_wall_0 = =math.ceil(speed_wall * 2/3) +speed_topbottom = =math.ceil(speed_print * 2/3) +speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 8 +material_print_temperature_layer_0 = =default_material_print_temperature + 3 +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_D.inst.cfg new file mode 100644 index 0000000000..8fc917fa9b --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_D.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = D +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = d +weight = -1 +material = generic_pla +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.47 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.53 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.45 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 65 +speed_wall = =math.ceil(speed_print * 3/4) +speed_wall_0 = =math.ceil(speed_wall * 2/3) +speed_topbottom = =math.ceil(speed_print * 2/3) +speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature_layer_0 = =default_material_print_temperature + 5 +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg new file mode 100644 index 0000000000..c3d67b70c3 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = b +weight = 1 +material = emotiontech_pva-m +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 60 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 10 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 0.75 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 2.5 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg new file mode 100644 index 0000000000..ddde828252 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = 0 +material = emotiontech_pva-m +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 3 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 10 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 0.75 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 2.5 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg new file mode 100644 index 0000000000..505ee183ea --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = D +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = d +weight = -1 +material = emotiontech_pva-m +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 10 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 0.75 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 2.5 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg new file mode 100644 index 0000000000..229eafee39 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = b +weight = 1 +material = emotiontech_pva-oks +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 60 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 10 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 0.75 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 2.5 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg new file mode 100644 index 0000000000..b53da2b016 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = 0 +material = emotiontech_pva-oks +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 3 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 10 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 0.75 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 2.5 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg new file mode 100644 index 0000000000..ea93e23b78 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = D +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = d +weight = -1 +material = emotiontech_pva-oks +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 10 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 0.75 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 2.5 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg new file mode 100644 index 0000000000..8a1d787043 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = b +weight = 1 +material = emotiontech_pva-s +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 60 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 10 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 0.75 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 2.5 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg new file mode 100644 index 0000000000..778d13f6fa --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = 0 +material = emotiontech_pva-s +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature + 3 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 10 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 0.75 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 2.5 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg new file mode 100644 index 0000000000..b4b89a8f2b --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = D +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = d +weight = -1 +material = emotiontech_pva-s +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.55 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 10 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 0.75 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 2.5 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_B.inst.cfg new file mode 100644 index 0000000000..ea4e6af87f --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_B.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = B +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = b +weight = 1 +material = emotiontech_tpu98a +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.59 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.49 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.54 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.54 +wall_0_wipe_dist = =machine_nozzle_size +speed_print = 35 +speed_wall = =math.ceil(speed_print * 4/4) +speed_wall_0 = =math.ceil(speed_wall * 3/4) +speed_topbottom = =math.ceil(speed_print * 2/3) +speed_support = =speed_wall_0 +speed_layer_0 = =math.ceil(speed_print * 20/35) +speed_slowdown_layers = 1 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 3 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 100 +retraction_extra_prime_amount = 0.2 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = False +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 2.5 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 0.7 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_C.inst.cfg new file mode 100644 index 0000000000..7655025553 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_C.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = 0 +material = emotiontech_tpu98a +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.59 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.49 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.54 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.54 +wall_0_wipe_dist = =machine_nozzle_size +speed_print = 40 +speed_wall = =math.ceil(speed_print * 4/4) +speed_wall_0 = =math.ceil(speed_wall * 3/4) +speed_topbottom = =math.ceil(speed_print * 2/3) +speed_support = =speed_wall_0 +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 1 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 100 +retraction_extra_prime_amount = 0.2 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = False +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 2.5 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 0.7 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_D.inst.cfg new file mode 100644 index 0000000000..2ed874dcc8 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_D.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = D +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = d +weight = -1 +material = emotiontech_tpu98a +variant = Standard 0.6 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.59 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.49 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.54 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.54 +wall_0_wipe_dist = =machine_nozzle_size +speed_print = 45 +speed_wall = =math.ceil(speed_print * 4/4) +speed_wall_0 = =math.ceil(speed_wall * 3/4) +speed_topbottom = =math.ceil(speed_print * 2/3) +speed_layer_0 = =math.ceil(speed_print * 20/45) +speed_slowdown_layers = 1 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 7 +material_print_temperature_layer_0 = =default_material_print_temperature +3 +material_flow = 100 +retraction_extra_prime_amount = 0.2 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = False +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 2.5 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 0.7 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg new file mode 100644 index 0000000000..d108b49387 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = 1 +material = generic_abs +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 50 +speed_wall = =math.ceil(speed_print * 40/50) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 35/50) +speed_layer_0 = =math.ceil(speed_print * 25/50) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 35 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 6 * layer_height +cool_min_speed = 10 +support_angle = 55 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =2*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 2 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg new file mode 100644 index 0000000000..be7dc9e4d5 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = D +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = d +weight = 0 +material = generic_abs +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 50 +speed_wall = =math.ceil(speed_print * 40/50) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 35/50) +speed_layer_0 = =math.ceil(speed_print * 25/50) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 35 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 6 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =2*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 2 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg new file mode 100644 index 0000000000..b030983ba4 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = E +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = e +weight = -1 +material = generic_abs +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 50 +speed_wall = =math.ceil(speed_print * 40/50) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 35/50) +speed_layer_0 = =math.ceil(speed_print * 25/50) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 35 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 6 * layer_height +cool_min_speed = 10 +support_angle = 45 +material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature_layer_0 = =default_material_print_temperature +5 +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =2*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 2 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_C.inst.cfg new file mode 100644 index 0000000000..f59341929a --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_C.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = 1 +material = generic_petg +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 50 +speed_wall = =math.ceil(speed_print * 40/50) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 35/50) +speed_layer_0 = =math.ceil(speed_print * 25/50) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 3 * layer_height +cool_min_speed = 10 +support_angle = 60 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0 +retraction_min_travel = =2*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_D.inst.cfg new file mode 100644 index 0000000000..fc549d5200 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_D.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = D +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = d +weight = 0 +material = generic_petg +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 50 +speed_wall = =math.ceil(speed_print * 40/50) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 35/50) +speed_layer_0 = =math.ceil(speed_print * 25/50) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 3 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0 +retraction_min_travel = =2*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_E.inst.cfg new file mode 100644 index 0000000000..2099dee307 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_E.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = E +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = e +weight = -1 +material = generic_petg +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 50 +speed_wall = =math.ceil(speed_print * 40/50) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 35/50) +speed_layer_0 = =math.ceil(speed_print * 25/50) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 3 * layer_height +cool_min_speed = 10 +support_angle = 45 +material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature_layer_0 = =default_material_print_temperature +5 +material_flow = 93 +retraction_extra_prime_amount = 0 +retraction_min_travel = =2*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_C.inst.cfg new file mode 100644 index 0000000000..01683d8376 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_C.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = 1 +material = generic_pla +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 50 +speed_wall = =math.ceil(speed_print * 40/50) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 35/50) +speed_layer_0 = =math.ceil(speed_print * 25/50) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_min_speed = 10 +support_angle = 60 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =2*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_D.inst.cfg new file mode 100644 index 0000000000..ff3849b17f --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_D.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = D +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = d +weight = 0 +material = generic_pla +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 50 +speed_wall = =math.ceil(speed_print * 40/50) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 35/50) +speed_layer_0 = =math.ceil(speed_print * 25/50) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +3 +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =2*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_E.inst.cfg new file mode 100644 index 0000000000..aaff46baeb --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_E.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = E +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = e +weight = -1 +material = generic_pla +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.75 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 50 +speed_wall = =math.ceil(speed_print * 40/50) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 35/50) +speed_layer_0 = =math.ceil(speed_print * 25/50) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_min_speed = 10 +support_angle = 45 +material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature_layer_0 = =default_material_print_temperature +5 +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =2*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg new file mode 100644 index 0000000000..d8775a20df --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = 1 +material = emotiontech_pvaoks +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 25/30) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 60 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 0.75 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 2 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg new file mode 100644 index 0000000000..749caf38a6 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = D +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = d +weight = 0 +material = emotiontech_pvaoks +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 25/30) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 0.75 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 2 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg new file mode 100644 index 0000000000..8314799002 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg @@ -0,0 +1,49 @@ +[general] +version = 4 +name = E +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = e +weight = -1 +material = emotiontech_pvaoks +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 40 +speed_wall = =math.ceil(speed_print * 30/40) +speed_wall_0 = =math.ceil(speed_wall * 25/30) +speed_topbottom = =math.ceil(speed_print * 20/40) +speed_layer_0 = =math.ceil(speed_print * 20/40) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 45 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 93 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 5 +support_z_distance = =layer_height-layer_height +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 0.75 +support_xy_distance_overhang = =line_width*0.175/line_width +support_offset = 2 +support_pattern = grid +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_C.inst.cfg new file mode 100644 index 0000000000..6509ee4b68 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_C.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = C +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = 1 +material = emotiontech_tpu +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.5*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.6 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_0_wipe_dist = =machine_nozzle_size +speed_print = 35 +speed_wall = =math.ceil(speed_print * 35/35) +speed_wall_0 = =math.ceil(speed_wall * 27/35) +speed_topbottom = =math.ceil(speed_print * 23/35) +speed_layer_0 = =math.ceil(speed_print * 20/35) +speed_slowdown_layers = 1 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 3 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 100 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =2*line_width +retraction_hop_only_when_collides = False +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 2.5 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 0.7 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_D.inst.cfg new file mode 100644 index 0000000000..f6fd55eb13 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_D.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = D +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = d +weight = 0 +material = emotiontech_tpu +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.67*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.6 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_0_wipe_dist = =machine_nozzle_size +speed_print = 35 +speed_wall = =math.ceil(speed_print * 35/35) +speed_wall_0 = =math.ceil(speed_wall * 27/35) +speed_topbottom = =math.ceil(speed_print * 23/35) +speed_layer_0 = =math.ceil(speed_print * 20/35) +speed_slowdown_layers = 1 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =default_material_print_temperature +material_flow = 100 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =2*line_width +retraction_hop_only_when_collides = False +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 2.5 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 0.7 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_E.inst.cfg new file mode 100644 index 0000000000..2b1928c418 --- /dev/null +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_E.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = E +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = e +weight = -1 +material = emotiontech_tpu +variant = Standard 0.8 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*0.8 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.6 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 +wall_0_wipe_dist = =machine_nozzle_size +speed_print = 35 +speed_wall = =math.ceil(speed_print * 35/35) +speed_wall_0 = =math.ceil(speed_wall * 27/35) +speed_topbottom = =math.ceil(speed_print * 23/35) +speed_layer_0 = =math.ceil(speed_print * 20/35) +speed_slowdown_layers = 1 +cool_fan_enabled = True +cool_fan_speed = 50 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 4 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 7 +material_print_temperature_layer_0 = =default_material_print_temperature +3 +material_flow = 100 +retraction_extra_prime_amount = 0.1 +retraction_min_travel = =2*line_width +retraction_hop_only_when_collides = False +skin_overlap = 5 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance +support_xy_distance = =line_width * 2.5 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 0.7 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/Standard_1.2/s3d_std1.2_PLA_H.inst.cfg b/resources/quality/strateo3d/Standard_1.2/s3d_std1.2_PLA_H.inst.cfg new file mode 100644 index 0000000000..ef9d7409e4 --- /dev/null +++ b/resources/quality/strateo3d/Standard_1.2/s3d_std1.2_PLA_H.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = H +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = h +weight = -1 +material = generic_pla +variant = Standard 1.2 + +[values] +layer_height_0 = =round(0.75*machine_nozzle_size, 2) +line_width = =machine_nozzle_size/machine_nozzle_size*1.1 +wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.0 +infill_line_width = =machine_nozzle_size/machine_nozzle_size*1.2 +support_line_width = =machine_nozzle_size/machine_nozzle_size*0.9 +wall_0_wipe_dist = =machine_nozzle_size/2 +speed_print = 35 +speed_wall = =math.ceil(speed_print * 27/35) +speed_wall_0 = =math.ceil(speed_print * 23/35) +speed_topbottom = =math.ceil(speed_print * 30/35) +speed_layer_0 = =math.ceil(speed_print * 25/35) +speed_slowdown_layers = 2 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 20 +cool_min_layer_time = 11 +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_min_speed = 10 +support_angle = 50 +material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature_layer_0 = =default_material_print_temperature + 5 +material_flow = 91 +retraction_extra_prime_amount = 0.5 +retraction_min_travel = =3*line_width +retraction_hop_only_when_collides = True +skin_overlap = 20 +support_z_distance = =layer_height*2 +support_bottom_distance = =support_z_distance*0.5 +support_xy_distance = =line_width * 1.7 +support_xy_distance_overhang = =wall_line_width_0 +support_offset = 1 +support_interface_density = 100 +prime_tower_enable = True \ No newline at end of file diff --git a/resources/quality/strateo3d/s3d_global_A.inst.cfg b/resources/quality/strateo3d/s3d_global_A.inst.cfg new file mode 100644 index 0000000000..9a972ff1d9 --- /dev/null +++ b/resources/quality/strateo3d/s3d_global_A.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Extra Fine Quality +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = a +weight = 0 +global_quality = True + +[values] +layer_height = 0.1 \ No newline at end of file diff --git a/resources/quality/strateo3d/s3d_global_B.inst.cfg b/resources/quality/strateo3d/s3d_global_B.inst.cfg new file mode 100644 index 0000000000..c9cb8b219a --- /dev/null +++ b/resources/quality/strateo3d/s3d_global_B.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Fine Quality +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = b +weight = 0 +global_quality = True + +[values] +layer_height = 0.2 \ No newline at end of file diff --git a/resources/quality/strateo3d/s3d_global_C.inst.cfg b/resources/quality/strateo3d/s3d_global_C.inst.cfg new file mode 100644 index 0000000000..7c3a0953b6 --- /dev/null +++ b/resources/quality/strateo3d/s3d_global_C.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = High Quality +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = c +weight = 0 +global_quality = True + +[values] +layer_height = 0.3 \ No newline at end of file diff --git a/resources/quality/strateo3d/s3d_global_D.inst.cfg b/resources/quality/strateo3d/s3d_global_D.inst.cfg new file mode 100644 index 0000000000..d5620092b7 --- /dev/null +++ b/resources/quality/strateo3d/s3d_global_D.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Medium Quality +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = d +weight = 0 +global_quality = True + +[values] +layer_height = 0.4 \ No newline at end of file diff --git a/resources/quality/strateo3d/s3d_global_E.inst.cfg b/resources/quality/strateo3d/s3d_global_E.inst.cfg new file mode 100644 index 0000000000..34de855053 --- /dev/null +++ b/resources/quality/strateo3d/s3d_global_E.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Low Quality +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = e +weight = 0 +global_quality = True + +[values] +layer_height = 0.5 diff --git a/resources/quality/strateo3d/s3d_global_F.inst.cfg b/resources/quality/strateo3d/s3d_global_F.inst.cfg new file mode 100644 index 0000000000..99f1de8283 --- /dev/null +++ b/resources/quality/strateo3d/s3d_global_F.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Coarse Quality +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = f +weight = 0 +global_quality = True + +[values] +layer_height = 0.6 diff --git a/resources/quality/strateo3d/s3d_global_G.inst.cfg b/resources/quality/strateo3d/s3d_global_G.inst.cfg new file mode 100644 index 0000000000..56db6800a8 --- /dev/null +++ b/resources/quality/strateo3d/s3d_global_G.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Extra Coarse Quality +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = g +weight = 0 +global_quality = True + +[values] +layer_height = 0.7 diff --git a/resources/quality/strateo3d/s3d_global_H.inst.cfg b/resources/quality/strateo3d/s3d_global_H.inst.cfg new file mode 100644 index 0000000000..a594bc7b50 --- /dev/null +++ b/resources/quality/strateo3d/s3d_global_H.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Ultra Coarse Quality +definition = strateo3d + +[metadata] +setting_version = 7 +type = quality +quality_type = h +weight = 0 +global_quality = True + +[values] +layer_height = 0.8 diff --git a/resources/variants/strateo3d_standard_04.inst.cfg b/resources/variants/strateo3d_standard_04.inst.cfg new file mode 100644 index 0000000000..f48df8dd8d --- /dev/null +++ b/resources/variants/strateo3d_standard_04.inst.cfg @@ -0,0 +1,21 @@ +[general] +name = Standard 0.4 +version = 4 +definition = strateo3d + +[metadata] +setting_version = 7 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_id = Standard 0.4 +machine_nozzle_size = 0.4 +machine_nozzle_tip_outer_diameter = 1.0 +layer_height = 0.2 +layer_height_0 = 0.3 +prime_tower_enable = True +retract_at_layer_change = False +support_angle = 60 +support_use_towers = True +top_bottom_thickness = =4*layer_height \ No newline at end of file diff --git a/resources/variants/strateo3d_standard_06.inst.cfg b/resources/variants/strateo3d_standard_06.inst.cfg new file mode 100644 index 0000000000..7c96ac0847 --- /dev/null +++ b/resources/variants/strateo3d_standard_06.inst.cfg @@ -0,0 +1,21 @@ +[general] +name = Standard 0.6 +version = 4 +definition = strateo3d + +[metadata] +setting_version = 7 +type = variant +hardware_type = nozzle + +[values] +machine_nozzle_id = Standard 0.6 +machine_nozzle_size = 0.6 +machine_nozzle_tip_outer_diameter = 1.5 +layer_height = 0.3 +layer_height_0 = 0.4 +prime_tower_enable = True +retract_at_layer_change = False +support_angle = 55 +support_use_towers = True +top_bottom_thickness = =4*layer_height \ No newline at end of file From 542c8e936f9c13eba94ac93b32eeb5523c5e90fb Mon Sep 17 00:00:00 2001 From: KOUBeMT <51325289+KOUBeMT@users.noreply.github.com> Date: Wed, 5 Jun 2019 16:16:43 +0200 Subject: [PATCH 02/11] Add pause script emotiontech --- .../PostProcessingPlugin/scripts/Pause_emt.py | 68 +++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 plugins/PostProcessingPlugin/scripts/Pause_emt.py diff --git a/plugins/PostProcessingPlugin/scripts/Pause_emt.py b/plugins/PostProcessingPlugin/scripts/Pause_emt.py new file mode 100644 index 0000000000..c736ee2065 --- /dev/null +++ b/plugins/PostProcessingPlugin/scripts/Pause_emt.py @@ -0,0 +1,68 @@ +# Copyright (c) 2019 Ultimaker B.V. +# The PostProcessingPlugin is released under the terms of the AGPLv3 or higher. + +from typing import Optional, Tuple + +from UM.Logger import Logger +from ..Script import Script + +class Pause_emt(Script): + + _layer_keyword = ";LAYER:" + + def __init__(self): + super().__init__() + + def getSettingDataString(self): + return """{ + "name":"Pause (eMotionTech Printers)", + "key": "Pause_emt", + "metadata": {}, + "version": 2, + "settings": + { + "layer_number": + { + "label": "Layer", + "description": "At what layer should pause occur. This will be before the layer starts printing.", + "unit": "", + "type": "str", + "default_value": "1" + } + } + }""" + + def execute(self, data: list): + + """data is a list. Each index contains a layer""" + layer_nums = self.getSettingValueByKey("layer_number") + + pause = "M600" + pause = pause + " ; Generated by PauseStrateo3d plugin" + + layer_targets = layer_nums.split(",") + if len(layer_targets) > 0: + for layer_num in layer_targets: + layer_num = int(layer_num.strip()) + if layer_num <= len(data): + index, layer_data = self._searchLayerData(data, layer_num - 1) + if layer_data is None: + Logger.log("e", "Layer not found") + continue + lines = layer_data.split("\n") + lines.insert(2, pause) + final_line = "\n".join(lines) + data[index] = final_line + return data + + ## This method returns the data corresponding with the indicated layer number, looking in the gcode for + # the occurrence of this layer number. + def _searchLayerData(self, data: list, layer_num: int) -> Tuple[int, Optional[str]]: + for index, layer_data in enumerate(data): + first_line = layer_data.split("\n")[0] + # The first line should contain the layer number at the beginning. + if first_line[:len(self._layer_keyword)] == self._layer_keyword: + # If found the layer that we are looking for, then return the data + if first_line[len(self._layer_keyword):] == str(layer_num): + return index, layer_data + return 0, None From 2a2656b14ef46991165fc6ed1c3e9619768f7169 Mon Sep 17 00:00:00 2001 From: KOUBeMT <51325289+KOUBeMT@users.noreply.github.com> Date: Wed, 5 Jun 2019 17:46:11 +0200 Subject: [PATCH 03/11] Speed_adjustment --- .../strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg | 2 +- .../strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg | 2 +- .../strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg | 2 +- .../strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg | 2 +- .../strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg | 2 +- .../strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg | 2 +- .../strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg | 8 ++++---- .../strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg | 8 ++++---- .../strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg | 8 ++++---- 9 files changed, 18 insertions(+), 18 deletions(-) diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg index 80021c8f83..9e22f937bc 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg @@ -20,7 +20,7 @@ support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 55 speed_wall = =math.ceil(speed_print * 40/55) -speed_wall_0 = =math.ceil(speed_wall * 25/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) speed_topbottom = =math.ceil(speed_print * 35/55) speed_layer_0 = =math.ceil(speed_print * 20/55) speed_slowdown_layers = 2 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg index 9f298125f4..2b93cc75b5 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg @@ -20,7 +20,7 @@ support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 60 speed_wall = =math.ceil(speed_print * 43/60) -speed_wall_0 = =math.ceil(speed_wall * 27/43) +speed_wall_0 = =math.ceil(speed_wall * 33/43) speed_topbottom = =math.ceil(speed_print * 37/60) speed_layer_0 = =math.ceil(speed_print * 25/60) speed_slowdown_layers = 2 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg index 37b9352ace..c133a7debb 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg @@ -20,7 +20,7 @@ support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 65 speed_wall = =math.ceil(speed_print * 45/65) -speed_wall_0 = =math.ceil(speed_wall * 30/45) +speed_wall_0 = =math.ceil(speed_wall * 33/45) speed_topbottom = =math.ceil(speed_print * 40/65) speed_layer_0 = =math.ceil(speed_print * 30/65) speed_slowdown_layers = 2 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg index aaaa5f4142..6cb51535cf 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg @@ -20,7 +20,7 @@ support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 55 speed_wall = =math.ceil(speed_print * 40/55) -speed_wall_0 = =math.ceil(speed_wall * 25/40) +speed_wall_0 = =math.ceil(speed_wall * 27/40) speed_topbottom = =math.ceil(speed_print * 35/55) speed_layer_0 = =math.ceil(speed_print * 20/55) speed_slowdown_layers = 2 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg index 363fd45113..c785523f3b 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg @@ -20,7 +20,7 @@ support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 60 speed_wall = =math.ceil(speed_print * 43/60) -speed_wall_0 = =math.ceil(speed_wall * 27/43) +speed_wall_0 = =math.ceil(speed_wall * 30/43) speed_topbottom = =math.ceil(speed_print * 37/60) speed_layer_0 = =math.ceil(speed_print * 25/60) speed_slowdown_layers = 2 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg index 16ddf51744..d47f1a1d89 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg @@ -20,7 +20,7 @@ support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 65 speed_wall = =math.ceil(speed_print * 45/65) -speed_wall_0 = =math.ceil(speed_wall * 30/45) +speed_wall_0 = =math.ceil(speed_wall * 33/45) speed_topbottom = =math.ceil(speed_print * 40/65) speed_layer_0 = =math.ceil(speed_print * 30/65) speed_slowdown_layers = 2 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg index 9ec3d02a87..d4f1556d6f 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg @@ -19,10 +19,10 @@ infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.55 support_line_width = =machine_nozzle_size/machine_nozzle_size*0.53 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 50 -speed_wall = =math.ceil(speed_print * 3/4) -speed_wall_0 = =math.ceil(speed_wall * 2/3) -speed_topbottom = =math.ceil(speed_print * 2/3) -speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_wall = =math.ceil(speed_print * 37/50) +speed_wall_0 = =math.ceil(speed_wall * 27/43) +speed_topbottom = =math.ceil(speed_print * 33/50) +speed_layer_0 = =math.ceil(speed_print * 20/50) speed_slowdown_layers = 2 cool_fan_enabled = True cool_fan_speed = 50 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg index ae8a264806..f8a36e50d1 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg @@ -19,10 +19,10 @@ infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.55 support_line_width = =machine_nozzle_size/machine_nozzle_size*0.53 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 55 -speed_wall = =math.ceil(speed_print * 3/4) -speed_wall_0 = =math.ceil(speed_wall * 2/3) -speed_topbottom = =math.ceil(speed_print * 2/3) -speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_wall = =math.ceil(speed_print * 40/55) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 35/55) +speed_layer_0 = =math.ceil(speed_print * 23/55) speed_slowdown_layers = 2 cool_fan_enabled = True cool_fan_speed = 50 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg index 6f43eebf5d..8ccf14195a 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg @@ -19,10 +19,10 @@ infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.55 support_line_width = =machine_nozzle_size/machine_nozzle_size*0.53 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 60 -speed_wall = =math.ceil(speed_print * 3/4) -speed_wall_0 = =math.ceil(speed_wall * 2/3) -speed_topbottom = =math.ceil(speed_print * 2/3) -speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_wall = =math.ceil(speed_print * 43/60) +speed_wall_0 = =math.ceil(speed_wall * 33/43) +speed_topbottom = =math.ceil(speed_print * 37/60) +speed_layer_0 = =math.ceil(speed_print * 25/60) speed_slowdown_layers = 2 cool_fan_enabled = True cool_fan_speed = 50 From 4751bfc75f1cde5388113dfcba22621e736132d6 Mon Sep 17 00:00:00 2001 From: KOUBeMT <51325289+KOUBeMT@users.noreply.github.com> Date: Wed, 5 Jun 2019 17:52:41 +0200 Subject: [PATCH 04/11] Speed_change --- .../quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg index c133a7debb..1c85299412 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg @@ -20,7 +20,7 @@ support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 65 speed_wall = =math.ceil(speed_print * 45/65) -speed_wall_0 = =math.ceil(speed_wall * 33/45) +speed_wall_0 = =math.ceil(speed_wall * 35/45) speed_topbottom = =math.ceil(speed_print * 40/65) speed_layer_0 = =math.ceil(speed_print * 30/65) speed_slowdown_layers = 2 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg index 6cb51535cf..2f8f7c4bfc 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg @@ -20,7 +20,7 @@ support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 55 speed_wall = =math.ceil(speed_print * 40/55) -speed_wall_0 = =math.ceil(speed_wall * 27/40) +speed_wall_0 = =math.ceil(speed_wall * 30/40) speed_topbottom = =math.ceil(speed_print * 35/55) speed_layer_0 = =math.ceil(speed_print * 20/55) speed_slowdown_layers = 2 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg index c785523f3b..90be6ac776 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg @@ -20,7 +20,7 @@ support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 60 speed_wall = =math.ceil(speed_print * 43/60) -speed_wall_0 = =math.ceil(speed_wall * 30/43) +speed_wall_0 = =math.ceil(speed_wall * 33/43) speed_topbottom = =math.ceil(speed_print * 37/60) speed_layer_0 = =math.ceil(speed_print * 25/60) speed_slowdown_layers = 2 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg index d47f1a1d89..e47a6f04a0 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg @@ -20,7 +20,7 @@ support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 65 speed_wall = =math.ceil(speed_print * 45/65) -speed_wall_0 = =math.ceil(speed_wall * 33/45) +speed_wall_0 = =math.ceil(speed_wall * 35/45) speed_topbottom = =math.ceil(speed_print * 40/65) speed_layer_0 = =math.ceil(speed_print * 30/65) speed_slowdown_layers = 2 From c54f599acb9969e3c74e5642ba1ba604c093ec79 Mon Sep 17 00:00:00 2001 From: KOUBeMT <51325289+KOUBeMT@users.noreply.github.com> Date: Thu, 6 Jun 2019 15:04:32 +0200 Subject: [PATCH 05/11] indentation_fix --- resources/definitions/strateo3d.def.json | 267 +++++++++--------- .../strateo3d_left_extruder.def.json | 28 +- .../strateo3d_right_extruder.def.json | 28 +- 3 files changed, 162 insertions(+), 161 deletions(-) diff --git a/resources/definitions/strateo3d.def.json b/resources/definitions/strateo3d.def.json index 46c193569d..ed6da5f26f 100644 --- a/resources/definitions/strateo3d.def.json +++ b/resources/definitions/strateo3d.def.json @@ -1,136 +1,137 @@ { "version": 2, - "name": "Strateo3D", - "inherits": "fdmprinter", - "metadata": { - "author": "M.K", - "manufacturer": "eMotionTech", - "category": "Other", - "visible": true, - "file_formats": "text/x-gcode", - "has_machine_quality": true, - "has_materials": true, - "has_machine_materials": true, - "has_variants": true, - "preferred_variant_name": "Standard 0.6", - "preferred_quality_type": "e", - "variants_name": "Print Head", - "machine_extruder_trains": - { - "0": "strateo3d_right_extruder", - "1": "strateo3d_left_extruder" - } + "name": "Strateo3D", + "inherits": "fdmprinter", + "metadata": + { + "author": "M.K", + "manufacturer": "eMotionTech", + "category": "Other", + "visible": true, + "file_formats": "text/x-gcode", + "has_machine_quality": true, + "has_materials": true, + "has_machine_materials": true, + "has_variants": true, + "preferred_variant_name": "Standard 0.6", + "preferred_quality_type": "e", + "variants_name": "Print Head", + "machine_extruder_trains": + { + "0": "strateo3d_right_extruder", + "1": "strateo3d_left_extruder" + } + }, + + "overrides": + { + "machine_name": { "default_value": "Strateo3D" }, + "machine_width": { "default_value": 600 }, + "machine_depth": { "default_value": 420 }, + "machine_height": { "default_value": 495 }, + "machine_heated_bed": { "default_value": true }, + "machine_center_is_zero": { "default_value": false }, + "machine_head_with_fans_polygon": { "default_value": [ [ -76, -51.8 ] , [ 25, -51.8 ] , [ 25, 38.2 ] , [ -76, 38.2 ] ] }, + "gantry_height": { "default_value": 40 }, + "machine_extruder_count": { "default_value": 2 }, + "machine_gcode_flavor": { "default_value": "Marlin" }, + "machine_start_gcode": { "default_value": "G28 \nG90 G1 X300 Y210 Z15 F6000 \nG92 E0" }, + "machine_end_gcode": { "default_value": "T1 \nM104 S0 \nT0 \nM104 S0 \nM140 S0 \nM141 S0 \nG91 \nG0 E-1 F1500 \nG0 z1 \nG90 \nG28 \nM801.2 \nM801.0 \nM84" }, + "extruder_prime_pos_y": {"minimum_value": "0", "maximum_value": "machine_depth"}, + "extruder_prime_pos_x": {"minimum_value": "0", "maximum_value": "machine_width"}, + "machine_heat_zone_length": { "default_value": 7 }, + "default_material_print_temperature": { "maximum_value_warning": "350" }, + "material_print_temperature": { "maximum_value_warning": "350" }, + "material_print_temperature_layer_0": { "maximum_value_warning": "350" }, + "material_bed_temperature": { "maximum_value": "130" }, + "material_bed_temperature_layer_0": { "maximum_value": "130" }, + "extruder_prime_pos_abs": { "default_value": true }, + "machine_acceleration": { "default_value": 2000 }, - }, - - "overrides": { - "machine_name": { "default_value": "Strateo3D" }, - "machine_width": { "default_value": 600 }, - "machine_depth": { "default_value": 420 }, - "machine_height": { "default_value": 495 }, - "machine_heated_bed": { "default_value": true }, - "machine_center_is_zero": { "default_value": false }, - "machine_head_with_fans_polygon": { "default_value": [ [ -76, -51.8 ] , [ 25, -51.8 ] , [ 25, 38.2 ] , [ -76, 38.2 ] ] }, - "gantry_height": { "default_value": 40 }, - "machine_extruder_count": { "default_value": 2 }, - "machine_gcode_flavor": { "default_value": "Marlin" }, - "machine_start_gcode": { "default_value": "G28 \nG90 G1 X300 Y210 Z15 F6000 \nG92 E0" }, - "machine_end_gcode": { "default_value": "T1 \nM104 S0 \nT0 \nM104 S0 \nM140 S0 \nM141 S0 \nG91 \nG0 E-1 F1500 \nG0 z1 \nG90 \nG28 \nM801.2 \nM801.0 \nM84" }, - "extruder_prime_pos_y": {"minimum_value": "0", "maximum_value": "machine_depth"}, - "extruder_prime_pos_x": {"minimum_value": "0", "maximum_value": "machine_width"}, - "machine_heat_zone_length": { "default_value": 7 }, - "default_material_print_temperature": { "maximum_value_warning": "350" }, - "material_print_temperature": { "maximum_value_warning": "350" }, - "material_print_temperature_layer_0": { "maximum_value_warning": "350" }, - "material_bed_temperature": { "maximum_value": "130" }, - "material_bed_temperature_layer_0": { "maximum_value": "130" }, - "extruder_prime_pos_abs": { "default_value": true }, - "machine_acceleration": { "default_value": 2000 }, - - "acceleration_enabled": { "value": false }, - "acceleration_layer_0": { "value": "acceleration_topbottom" }, - "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 1000 / 2000)" }, - "acceleration_print": { "value": "2000" }, - "acceleration_support": { "value": "acceleration_print" }, - "acceleration_support_interface": { "value": "acceleration_topbottom" }, - "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 1000 / 2000)" }, - "acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 2000)" }, - "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1500)" }, - "adaptive_layer_height_variation": { "default_value": 0.1 }, - "adaptive_layer_height_variation_step": { "default_value": 0.05 }, - "adhesion_type": { "default_value": "skirt" }, - "expand_skins_expand_distance": { "value": "wall_line_width_0 + wall_line_count * wall_line_width_x" }, - "gradual_infill_step_height": { "value": "layer_height*10" }, - "gradual_support_infill_step_height": { "value": "layer_height*7" }, - "infill_before_walls": { "default_value": false }, - "infill_overlap": { "value": "0" }, - "infill_wipe_dist": { "value": "0" }, - "jerk_enabled": { "value": "False" }, - "jerk_layer_0": { "value": "jerk_topbottom" }, - "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" }, - "jerk_print": { "value": "25" }, - "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" }, - "jerk_support_interface": { "value": "jerk_topbottom" }, - "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" }, - "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" }, - "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" }, - "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, - "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, - "machine_min_cool_heat_time_window": { "value": "15" }, - "machine_nozzle_cool_down_speed": { "default_value": 0.50 }, - "machine_nozzle_heat_up_speed": { "default_value": 2.25 }, - "material_final_print_temperature": { "value": "material_print_temperature - 10" }, - "material_flow": { "default_value": 93 }, - "material_flow_layer_0": { "value": "math.ceil(material_flow*1)" }, - "material_initial_print_temperature": { "value": "material_print_temperature - 5" }, - "meshfix_maximum_resolution": { "value": "0.03" }, - "optimize_wall_printing_order": { "value": "True" }, - "prime_blob_enable": { "enabled": false, "default_value": false }, - "prime_tower_min_volume": { "default_value": 35 }, - "prime_tower_position_x": { "value": "machine_width/2 - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" }, - "prime_tower_position_y": { "value": "machine_depth - prime_tower_size - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" }, - "retraction_amount": { "default_value": 1.5 }, - "retraction_combing": { "default_value": "all" }, - "retraction_combing_max_distance": { "default_value": 5 }, - "retraction_count_max": { "default_value": 15 }, - "retraction_hop": { "value": "2" }, - "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, - "retraction_hop_only_when_collides": { "value": "True" }, - "retraction_min_travel": { "value": "3*line_width" }, - "retraction_prime_speed": { "value": "retraction_speed-10" }, - "retraction_speed": { "default_value": 25 }, - "skin_overlap": { "value": "10" }, - "skirt_brim_minimal_length": { "default_value": 333 }, - "speed_layer_0": { "value": "20" }, - "speed_travel_layer_0": { "value": "100" }, - "speed_prime_tower": { "value": "speed_topbottom" }, - "speed_print": { "value": "50" }, - "speed_support": { "value": "speed_wall" }, - "speed_support_interface": { "value": "speed_topbottom" }, - "speed_topbottom": { "value": "math.ceil(speed_print * 20/35)" }, - "speed_travel": { "value": "150" }, - "speed_wall": { "value": "math.ceil(speed_print * 3/4)" }, - "speed_wall_0": { "value": "math.ceil(speed_wall * 2/3)" }, - "speed_wall_x": { "value": "speed_wall" }, - "support_angle": { "value": "50" }, - "support_bottom_distance": {"value": "extruderValue(support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr, 'support_z_distance/2') if support_type == 'everywhere' else 0", "maximum_value_warning": "machine_nozzle_size*1.5" }, - "support_interface_enable": { "default_value": true }, - "support_interface_height": { "value": "layer_height*3" }, - "support_interface_offset": { "value": "support_offset" }, - "support_top_distance": {"value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance')", "maximum_value_warning": "machine_nozzle_size*1.5" }, - "support_use_towers": { "default_value": true }, - "support_xy_distance": { "value": "line_width * 1.7" }, - "support_xy_distance_overhang": { "value": "wall_line_width_0" }, - "support_z_distance": { "value": "layer_height*2", "maximum_value_warning": "machine_nozzle_size*1.5" }, - "switch_extruder_prime_speed": { "value": "retraction_prime_speed" }, - "switch_extruder_retraction_amount": { "value": "7" }, - "switch_extruder_retraction_speeds": {"value": "retraction_retract_speed"}, - "top_bottom_thickness": { "value": "3*layer_height", "minimum_value_warning": "layer_height*2" }, - "top_thickness": { "value": "top_bottom_thickness" }, - "top_layers": { "value": "0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))"}, - "bottom_thickness": { "value": "top_bottom_thickness-2*layer_height+layer_height_0" }, - "bottom_layers": { "value": "999999 if infill_sparse_density == 100 else math.ceil(round(((bottom_thickness-resolveOrValue('layer_height_0')) / resolveOrValue('layer_height'))+1, 4))"}, - "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, - "wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" } - } -} \ No newline at end of file + "acceleration_enabled": { "value": false }, + "acceleration_layer_0": { "value": "acceleration_topbottom" }, + "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 1000 / 2000)" }, + "acceleration_print": { "value": "2000" }, + "acceleration_support": { "value": "acceleration_print" }, + "acceleration_support_interface": { "value": "acceleration_topbottom" }, + "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 1000 / 2000)" }, + "acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 2000)" }, + "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1500)" }, + "adaptive_layer_height_variation": { "default_value": 0.1 }, + "adaptive_layer_height_variation_step": { "default_value": 0.05 }, + "adhesion_type": { "default_value": "skirt" }, + "expand_skins_expand_distance": { "value": "wall_line_width_0 + wall_line_count * wall_line_width_x" }, + "gradual_infill_step_height": { "value": "layer_height*10" }, + "gradual_support_infill_step_height": { "value": "layer_height*7" }, + "infill_before_walls": { "default_value": false }, + "infill_overlap": { "value": "0" }, + "infill_wipe_dist": { "value": "0" }, + "jerk_enabled": { "value": "False" }, + "jerk_layer_0": { "value": "jerk_topbottom" }, + "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" }, + "jerk_print": { "value": "25" }, + "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" }, + "jerk_support_interface": { "value": "jerk_topbottom" }, + "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" }, + "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" }, + "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" }, + "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, + "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, + "machine_min_cool_heat_time_window": { "value": "15" }, + "machine_nozzle_cool_down_speed": { "default_value": 0.50 }, + "machine_nozzle_heat_up_speed": { "default_value": 2.25 }, + "material_final_print_temperature": { "value": "material_print_temperature - 10" }, + "material_flow": { "default_value": 93 }, + "material_flow_layer_0": { "value": "math.ceil(material_flow*1)" }, + "material_initial_print_temperature": { "value": "material_print_temperature - 5" }, + "meshfix_maximum_resolution": { "value": "0.03" }, + "optimize_wall_printing_order": { "value": "True" }, + "prime_blob_enable": { "enabled": false, "default_value": false }, + "prime_tower_min_volume": { "default_value": 35 }, + "prime_tower_position_x": { "value": "machine_width/2 - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" }, + "prime_tower_position_y": { "value": "machine_depth - prime_tower_size - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" }, + "retraction_amount": { "default_value": 1.5 }, + "retraction_combing": { "default_value": "all" }, + "retraction_combing_max_distance": { "default_value": 5 }, + "retraction_count_max": { "default_value": 15 }, + "retraction_hop": { "value": "2" }, + "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, + "retraction_hop_only_when_collides": { "value": "True" }, + "retraction_min_travel": { "value": "3*line_width" }, + "retraction_prime_speed": { "value": "retraction_speed-10" }, + "retraction_speed": { "default_value": 25 }, + "skin_overlap": { "value": "10" }, + "skirt_brim_minimal_length": { "default_value": 333 }, + "speed_layer_0": { "value": "20" }, + "speed_travel_layer_0": { "value": "100" }, + "speed_prime_tower": { "value": "speed_topbottom" }, + "speed_print": { "value": "50" }, + "speed_support": { "value": "speed_wall" }, + "speed_support_interface": { "value": "speed_topbottom" }, + "speed_topbottom": { "value": "math.ceil(speed_print * 20/35)" }, + "speed_travel": { "value": "150" }, + "speed_wall": { "value": "math.ceil(speed_print * 3/4)" }, + "speed_wall_0": { "value": "math.ceil(speed_wall * 2/3)" }, + "speed_wall_x": { "value": "speed_wall" }, + "support_angle": { "value": "50" }, + "support_bottom_distance": {"value": "extruderValue(support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr, 'support_z_distance/2') if support_type == 'everywhere' else 0", "maximum_value_warning": "machine_nozzle_size*1.5" }, + "support_interface_enable": { "default_value": true }, + "support_interface_height": { "value": "layer_height*3" }, + "support_interface_offset": { "value": "support_offset" }, + "support_top_distance": {"value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance')", "maximum_value_warning": "machine_nozzle_size*1.5" }, + "support_use_towers": { "default_value": true }, + "support_xy_distance": { "value": "line_width * 1.7" }, + "support_xy_distance_overhang": { "value": "wall_line_width_0" }, + "support_z_distance": { "value": "layer_height*2", "maximum_value_warning": "machine_nozzle_size*1.5" }, + "switch_extruder_prime_speed": { "value": "retraction_prime_speed" }, + "switch_extruder_retraction_amount": { "value": "7" }, + "switch_extruder_retraction_speeds": {"value": "retraction_retract_speed"}, + "top_bottom_thickness": { "value": "3*layer_height", "minimum_value_warning": "layer_height*2" }, + "top_thickness": { "value": "top_bottom_thickness" }, + "top_layers": { "value": "0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))"}, + "bottom_thickness": { "value": "top_bottom_thickness-2*layer_height+layer_height_0" }, + "bottom_layers": { "value": "999999 if infill_sparse_density == 100 else math.ceil(round(((bottom_thickness-resolveOrValue('layer_height_0')) / resolveOrValue('layer_height'))+1, 4))"}, + "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, + "wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" } + } + } \ No newline at end of file diff --git a/resources/extruders/strateo3d_left_extruder.def.json b/resources/extruders/strateo3d_left_extruder.def.json index 2d6221ff22..52f2f351cd 100644 --- a/resources/extruders/strateo3d_left_extruder.def.json +++ b/resources/extruders/strateo3d_left_extruder.def.json @@ -1,17 +1,17 @@ { - "id": "strateo3d_left_extruder", - "version": 2, - "name": "Left Extruder", - "inherits": "fdmextruder", - "metadata": { - "machine": "strateo3d", - "position": "1" - }, + "id": "strateo3d_left_extruder", + "version": 2, + "name": "Left Extruder", + "inherits": "fdmextruder", + "metadata": { + "machine": "strateo3d", + "position": "1" + }, - "overrides": { - "extruder_nr": { "default_value": 1, "maximum_value": "1" }, + "overrides": { + "extruder_nr": { "default_value": 1, "maximum_value": "1" }, "material_diameter": { "default_value": 1.75 }, - "machine_nozzle_offset_x": { "default_value": 0 }, - "machine_nozzle_offset_y": { "default_value": 0 } - } -} + "machine_nozzle_offset_x": { "default_value": 0 }, + "machine_nozzle_offset_y": { "default_value": 0 } + } +} \ No newline at end of file diff --git a/resources/extruders/strateo3d_right_extruder.def.json b/resources/extruders/strateo3d_right_extruder.def.json index d64a562a34..b4f341517c 100644 --- a/resources/extruders/strateo3d_right_extruder.def.json +++ b/resources/extruders/strateo3d_right_extruder.def.json @@ -1,17 +1,17 @@ { - "id": "strateo3d_right_extruder", - "version": 2, - "name": "Right Extruder", - "inherits": "fdmextruder", - "metadata": { - "machine": "strateo3d", - "position": "0" - }, + "id": "strateo3d_right_extruder", + "version": 2, + "name": "Right Extruder", + "inherits": "fdmextruder", + "metadata": { + "machine": "strateo3d", + "position": "0" + }, - "overrides": { - "extruder_nr": { "default_value": 0, "maximum_value": "1" }, + "overrides": { + "extruder_nr": { "default_value": 0, "maximum_value": "1" }, "material_diameter": { "default_value": 1.75 }, - "machine_nozzle_offset_x": { "default_value": 0 }, - "machine_nozzle_offset_y": { "default_value": 0 } - } -} + "machine_nozzle_offset_x": { "default_value": 0 }, + "machine_nozzle_offset_y": { "default_value": 0 } + } +} \ No newline at end of file From ee06ecca013e5ede43cd54032c7c0a67dda89fb2 Mon Sep 17 00:00:00 2001 From: KOUBeMT <51325289+KOUBeMT@users.noreply.github.com> Date: Fri, 7 Jun 2019 10:15:29 +0200 Subject: [PATCH 06/11] Indentation_fix_tabs_to_4spaces --- resources/definitions/strateo3d.def.json | 270 +++++++++--------- .../strateo3d_left_extruder.def.json | 28 +- .../strateo3d_right_extruder.def.json | 28 +- 3 files changed, 163 insertions(+), 163 deletions(-) diff --git a/resources/definitions/strateo3d.def.json b/resources/definitions/strateo3d.def.json index ed6da5f26f..fdf91bf1eb 100644 --- a/resources/definitions/strateo3d.def.json +++ b/resources/definitions/strateo3d.def.json @@ -1,137 +1,137 @@ { - "version": 2, - "name": "Strateo3D", - "inherits": "fdmprinter", - "metadata": - { - "author": "M.K", - "manufacturer": "eMotionTech", - "category": "Other", - "visible": true, - "file_formats": "text/x-gcode", - "has_machine_quality": true, - "has_materials": true, - "has_machine_materials": true, - "has_variants": true, - "preferred_variant_name": "Standard 0.6", - "preferred_quality_type": "e", - "variants_name": "Print Head", - "machine_extruder_trains": - { - "0": "strateo3d_right_extruder", - "1": "strateo3d_left_extruder" - } - }, - - "overrides": - { - "machine_name": { "default_value": "Strateo3D" }, - "machine_width": { "default_value": 600 }, - "machine_depth": { "default_value": 420 }, - "machine_height": { "default_value": 495 }, - "machine_heated_bed": { "default_value": true }, - "machine_center_is_zero": { "default_value": false }, - "machine_head_with_fans_polygon": { "default_value": [ [ -76, -51.8 ] , [ 25, -51.8 ] , [ 25, 38.2 ] , [ -76, 38.2 ] ] }, - "gantry_height": { "default_value": 40 }, - "machine_extruder_count": { "default_value": 2 }, - "machine_gcode_flavor": { "default_value": "Marlin" }, - "machine_start_gcode": { "default_value": "G28 \nG90 G1 X300 Y210 Z15 F6000 \nG92 E0" }, - "machine_end_gcode": { "default_value": "T1 \nM104 S0 \nT0 \nM104 S0 \nM140 S0 \nM141 S0 \nG91 \nG0 E-1 F1500 \nG0 z1 \nG90 \nG28 \nM801.2 \nM801.0 \nM84" }, - "extruder_prime_pos_y": {"minimum_value": "0", "maximum_value": "machine_depth"}, - "extruder_prime_pos_x": {"minimum_value": "0", "maximum_value": "machine_width"}, - "machine_heat_zone_length": { "default_value": 7 }, - "default_material_print_temperature": { "maximum_value_warning": "350" }, - "material_print_temperature": { "maximum_value_warning": "350" }, - "material_print_temperature_layer_0": { "maximum_value_warning": "350" }, - "material_bed_temperature": { "maximum_value": "130" }, - "material_bed_temperature_layer_0": { "maximum_value": "130" }, - "extruder_prime_pos_abs": { "default_value": true }, - "machine_acceleration": { "default_value": 2000 }, + "version": 2, + "name": "Strateo3D", + "inherits": "fdmprinter", + "metadata": + { + "author": "M.K", + "manufacturer": "eMotionTech", + "category": "Other", + "visible": true, + "file_formats": "text/x-gcode", + "has_machine_quality": true, + "has_materials": true, + "has_machine_materials": true, + "has_variants": true, + "preferred_variant_name": "Standard 0.6", + "preferred_quality_type": "e", + "variants_name": "Print Head", + "machine_extruder_trains": + { + "0": "strateo3d_right_extruder", + "1": "strateo3d_left_extruder" + } + }, + + "overrides": + { + "machine_name": { "default_value": "Strateo3D" }, + "machine_width": { "default_value": 600 }, + "machine_depth": { "default_value": 420 }, + "machine_height": { "default_value": 495 }, + "machine_heated_bed": { "default_value": true }, + "machine_center_is_zero": { "default_value": false }, + "machine_head_with_fans_polygon": { "default_value": [ [ -76, -51.8 ] , [ 25, -51.8 ] , [ 25, 38.2 ] , [ -76, 38.2 ] ] }, + "gantry_height": { "default_value": 40 }, + "machine_extruder_count": { "default_value": 2 }, + "machine_gcode_flavor": { "default_value": "Marlin" }, + "machine_start_gcode": { "default_value": "G28 \nG90 G1 X300 Y210 Z15 F6000 \nG92 E0" }, + "machine_end_gcode": { "default_value": "T1 \nM104 S0 \nT0 \nM104 S0 \nM140 S0 \nM141 S0 \nG91 \nG0 E-1 F1500 \nG0 z1 \nG90 \nG28 \nM801.2 \nM801.0 \nM84" }, + "extruder_prime_pos_y": {"minimum_value": "0", "maximum_value": "machine_depth"}, + "extruder_prime_pos_x": {"minimum_value": "0", "maximum_value": "machine_width"}, + "machine_heat_zone_length": { "default_value": 7 }, + "default_material_print_temperature": { "maximum_value_warning": "350" }, + "material_print_temperature": { "maximum_value_warning": "350" }, + "material_print_temperature_layer_0": { "maximum_value_warning": "350" }, + "material_bed_temperature": { "maximum_value": "130" }, + "material_bed_temperature_layer_0": { "maximum_value": "130" }, + "extruder_prime_pos_abs": { "default_value": true }, + "machine_acceleration": { "default_value": 2000 }, - "acceleration_enabled": { "value": false }, - "acceleration_layer_0": { "value": "acceleration_topbottom" }, - "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 1000 / 2000)" }, - "acceleration_print": { "value": "2000" }, - "acceleration_support": { "value": "acceleration_print" }, - "acceleration_support_interface": { "value": "acceleration_topbottom" }, - "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 1000 / 2000)" }, - "acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 2000)" }, - "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1500)" }, - "adaptive_layer_height_variation": { "default_value": 0.1 }, - "adaptive_layer_height_variation_step": { "default_value": 0.05 }, - "adhesion_type": { "default_value": "skirt" }, - "expand_skins_expand_distance": { "value": "wall_line_width_0 + wall_line_count * wall_line_width_x" }, - "gradual_infill_step_height": { "value": "layer_height*10" }, - "gradual_support_infill_step_height": { "value": "layer_height*7" }, - "infill_before_walls": { "default_value": false }, - "infill_overlap": { "value": "0" }, - "infill_wipe_dist": { "value": "0" }, - "jerk_enabled": { "value": "False" }, - "jerk_layer_0": { "value": "jerk_topbottom" }, - "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" }, - "jerk_print": { "value": "25" }, - "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" }, - "jerk_support_interface": { "value": "jerk_topbottom" }, - "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" }, - "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" }, - "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" }, - "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, - "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, - "machine_min_cool_heat_time_window": { "value": "15" }, - "machine_nozzle_cool_down_speed": { "default_value": 0.50 }, - "machine_nozzle_heat_up_speed": { "default_value": 2.25 }, - "material_final_print_temperature": { "value": "material_print_temperature - 10" }, - "material_flow": { "default_value": 93 }, - "material_flow_layer_0": { "value": "math.ceil(material_flow*1)" }, - "material_initial_print_temperature": { "value": "material_print_temperature - 5" }, - "meshfix_maximum_resolution": { "value": "0.03" }, - "optimize_wall_printing_order": { "value": "True" }, - "prime_blob_enable": { "enabled": false, "default_value": false }, - "prime_tower_min_volume": { "default_value": 35 }, - "prime_tower_position_x": { "value": "machine_width/2 - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" }, - "prime_tower_position_y": { "value": "machine_depth - prime_tower_size - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" }, - "retraction_amount": { "default_value": 1.5 }, - "retraction_combing": { "default_value": "all" }, - "retraction_combing_max_distance": { "default_value": 5 }, - "retraction_count_max": { "default_value": 15 }, - "retraction_hop": { "value": "2" }, - "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, - "retraction_hop_only_when_collides": { "value": "True" }, - "retraction_min_travel": { "value": "3*line_width" }, - "retraction_prime_speed": { "value": "retraction_speed-10" }, - "retraction_speed": { "default_value": 25 }, - "skin_overlap": { "value": "10" }, - "skirt_brim_minimal_length": { "default_value": 333 }, - "speed_layer_0": { "value": "20" }, - "speed_travel_layer_0": { "value": "100" }, - "speed_prime_tower": { "value": "speed_topbottom" }, - "speed_print": { "value": "50" }, - "speed_support": { "value": "speed_wall" }, - "speed_support_interface": { "value": "speed_topbottom" }, - "speed_topbottom": { "value": "math.ceil(speed_print * 20/35)" }, - "speed_travel": { "value": "150" }, - "speed_wall": { "value": "math.ceil(speed_print * 3/4)" }, - "speed_wall_0": { "value": "math.ceil(speed_wall * 2/3)" }, - "speed_wall_x": { "value": "speed_wall" }, - "support_angle": { "value": "50" }, - "support_bottom_distance": {"value": "extruderValue(support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr, 'support_z_distance/2') if support_type == 'everywhere' else 0", "maximum_value_warning": "machine_nozzle_size*1.5" }, - "support_interface_enable": { "default_value": true }, - "support_interface_height": { "value": "layer_height*3" }, - "support_interface_offset": { "value": "support_offset" }, - "support_top_distance": {"value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance')", "maximum_value_warning": "machine_nozzle_size*1.5" }, - "support_use_towers": { "default_value": true }, - "support_xy_distance": { "value": "line_width * 1.7" }, - "support_xy_distance_overhang": { "value": "wall_line_width_0" }, - "support_z_distance": { "value": "layer_height*2", "maximum_value_warning": "machine_nozzle_size*1.5" }, - "switch_extruder_prime_speed": { "value": "retraction_prime_speed" }, - "switch_extruder_retraction_amount": { "value": "7" }, - "switch_extruder_retraction_speeds": {"value": "retraction_retract_speed"}, - "top_bottom_thickness": { "value": "3*layer_height", "minimum_value_warning": "layer_height*2" }, - "top_thickness": { "value": "top_bottom_thickness" }, - "top_layers": { "value": "0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))"}, - "bottom_thickness": { "value": "top_bottom_thickness-2*layer_height+layer_height_0" }, - "bottom_layers": { "value": "999999 if infill_sparse_density == 100 else math.ceil(round(((bottom_thickness-resolveOrValue('layer_height_0')) / resolveOrValue('layer_height'))+1, 4))"}, - "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, - "wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" } - } - } \ No newline at end of file + "acceleration_enabled": { "value": false }, + "acceleration_layer_0": { "value": "acceleration_topbottom" }, + "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 1000 / 2000)" }, + "acceleration_print": { "value": "2000" }, + "acceleration_support": { "value": "acceleration_print" }, + "acceleration_support_interface": { "value": "acceleration_topbottom" }, + "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 1000 / 2000)" }, + "acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 2000)" }, + "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1500)" }, + "adaptive_layer_height_variation": { "default_value": 0.1 }, + "adaptive_layer_height_variation_step": { "default_value": 0.05 }, + "adhesion_type": { "default_value": "skirt" }, + "expand_skins_expand_distance": { "value": "wall_line_width_0 + wall_line_count * wall_line_width_x" }, + "gradual_infill_step_height": { "value": "layer_height*10" }, + "gradual_support_infill_step_height": { "value": "layer_height*7" }, + "infill_before_walls": { "default_value": false }, + "infill_overlap": { "value": "0" }, + "infill_wipe_dist": { "value": "0" }, + "jerk_enabled": { "value": "False" }, + "jerk_layer_0": { "value": "jerk_topbottom" }, + "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" }, + "jerk_print": { "value": "25" }, + "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" }, + "jerk_support_interface": { "value": "jerk_topbottom" }, + "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" }, + "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" }, + "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" }, + "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" }, + "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" }, + "machine_min_cool_heat_time_window": { "value": "15" }, + "machine_nozzle_cool_down_speed": { "default_value": 0.50 }, + "machine_nozzle_heat_up_speed": { "default_value": 2.25 }, + "material_final_print_temperature": { "value": "material_print_temperature - 10" }, + "material_flow": { "default_value": 93 }, + "material_flow_layer_0": { "value": "math.ceil(material_flow*1)" }, + "material_initial_print_temperature": { "value": "material_print_temperature - 5" }, + "meshfix_maximum_resolution": { "value": "0.03" }, + "optimize_wall_printing_order": { "value": "True" }, + "prime_blob_enable": { "enabled": false, "default_value": false }, + "prime_tower_min_volume": { "default_value": 35 }, + "prime_tower_position_x": { "value": "machine_width/2 - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" }, + "prime_tower_position_y": { "value": "machine_depth - prime_tower_size - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" }, + "retraction_amount": { "default_value": 1.5 }, + "retraction_combing": { "default_value": "all" }, + "retraction_combing_max_distance": { "default_value": 5 }, + "retraction_count_max": { "default_value": 15 }, + "retraction_hop": { "value": "2" }, + "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, + "retraction_hop_only_when_collides": { "value": "True" }, + "retraction_min_travel": { "value": "3*line_width" }, + "retraction_prime_speed": { "value": "retraction_speed-10" }, + "retraction_speed": { "default_value": 25 }, + "skin_overlap": { "value": "10" }, + "skirt_brim_minimal_length": { "default_value": 333 }, + "speed_layer_0": { "value": "20" }, + "speed_travel_layer_0": { "value": "100" }, + "speed_prime_tower": { "value": "speed_topbottom" }, + "speed_print": { "value": "50" }, + "speed_support": { "value": "speed_wall" }, + "speed_support_interface": { "value": "speed_topbottom" }, + "speed_topbottom": { "value": "math.ceil(speed_print * 20/35)" }, + "speed_travel": { "value": "150" }, + "speed_wall": { "value": "math.ceil(speed_print * 3/4)" }, + "speed_wall_0": { "value": "math.ceil(speed_wall * 2/3)" }, + "speed_wall_x": { "value": "speed_wall" }, + "support_angle": { "value": "50" }, + "support_bottom_distance": {"value": "extruderValue(support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr, 'support_z_distance/2') if support_type == 'everywhere' else 0", "maximum_value_warning": "machine_nozzle_size*1.5" }, + "support_interface_enable": { "default_value": true }, + "support_interface_height": { "value": "layer_height*3" }, + "support_interface_offset": { "value": "support_offset" }, + "support_top_distance": {"value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance')", "maximum_value_warning": "machine_nozzle_size*1.5" }, + "support_use_towers": { "default_value": true }, + "support_xy_distance": { "value": "line_width * 1.7" }, + "support_xy_distance_overhang": { "value": "wall_line_width_0" }, + "support_z_distance": { "value": "layer_height*2", "maximum_value_warning": "machine_nozzle_size*1.5" }, + "switch_extruder_prime_speed": { "value": "retraction_prime_speed" }, + "switch_extruder_retraction_amount": { "value": "7" }, + "switch_extruder_retraction_speeds": {"value": "retraction_retract_speed"}, + "top_bottom_thickness": { "value": "3*layer_height", "minimum_value_warning": "layer_height*2" }, + "top_thickness": { "value": "top_bottom_thickness" }, + "top_layers": { "value": "0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))"}, + "bottom_thickness": { "value": "top_bottom_thickness-2*layer_height+layer_height_0" }, + "bottom_layers": { "value": "999999 if infill_sparse_density == 100 else math.ceil(round(((bottom_thickness-resolveOrValue('layer_height_0')) / resolveOrValue('layer_height'))+1, 4))"}, + "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" }, + "wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" } + } +} \ No newline at end of file diff --git a/resources/extruders/strateo3d_left_extruder.def.json b/resources/extruders/strateo3d_left_extruder.def.json index 52f2f351cd..d3b59d794b 100644 --- a/resources/extruders/strateo3d_left_extruder.def.json +++ b/resources/extruders/strateo3d_left_extruder.def.json @@ -1,17 +1,17 @@ { - "id": "strateo3d_left_extruder", - "version": 2, - "name": "Left Extruder", - "inherits": "fdmextruder", - "metadata": { - "machine": "strateo3d", - "position": "1" - }, + "id": "strateo3d_left_extruder", + "version": 2, + "name": "Left Extruder", + "inherits": "fdmextruder", + "metadata": { + "machine": "strateo3d", + "position": "1" + }, - "overrides": { - "extruder_nr": { "default_value": 1, "maximum_value": "1" }, - "material_diameter": { "default_value": 1.75 }, - "machine_nozzle_offset_x": { "default_value": 0 }, - "machine_nozzle_offset_y": { "default_value": 0 } - } + "overrides": { + "extruder_nr": { "default_value": 1, "maximum_value": "1" }, + "material_diameter": { "default_value": 1.75 }, + "machine_nozzle_offset_x": { "default_value": 0 }, + "machine_nozzle_offset_y": { "default_value": 0 } + } } \ No newline at end of file diff --git a/resources/extruders/strateo3d_right_extruder.def.json b/resources/extruders/strateo3d_right_extruder.def.json index b4f341517c..227df73ad0 100644 --- a/resources/extruders/strateo3d_right_extruder.def.json +++ b/resources/extruders/strateo3d_right_extruder.def.json @@ -1,17 +1,17 @@ { - "id": "strateo3d_right_extruder", - "version": 2, - "name": "Right Extruder", - "inherits": "fdmextruder", - "metadata": { - "machine": "strateo3d", - "position": "0" - }, + "id": "strateo3d_right_extruder", + "version": 2, + "name": "Right Extruder", + "inherits": "fdmextruder", + "metadata": { + "machine": "strateo3d", + "position": "0" + }, - "overrides": { - "extruder_nr": { "default_value": 0, "maximum_value": "1" }, - "material_diameter": { "default_value": 1.75 }, - "machine_nozzle_offset_x": { "default_value": 0 }, - "machine_nozzle_offset_y": { "default_value": 0 } - } + "overrides": { + "extruder_nr": { "default_value": 0, "maximum_value": "1" }, + "material_diameter": { "default_value": 1.75 }, + "machine_nozzle_offset_x": { "default_value": 0 }, + "machine_nozzle_offset_y": { "default_value": 0 } + } } \ No newline at end of file From 00dbe63300d05873f1a18fed7864f7babaf1a45a Mon Sep 17 00:00:00 2001 From: KOUBeMT <51325289+KOUBeMT@users.noreply.github.com> Date: Fri, 7 Jun 2019 17:01:30 +0200 Subject: [PATCH 07/11] ABS_cooling_N0.6 --- .../quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg index d4f1556d6f..2cfba65957 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg @@ -25,7 +25,7 @@ speed_topbottom = =math.ceil(speed_print * 33/50) speed_layer_0 = =math.ceil(speed_print * 20/50) speed_slowdown_layers = 2 cool_fan_enabled = True -cool_fan_speed = 50 +cool_fan_speed = 35 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg index f8a36e50d1..817e38af88 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg @@ -25,7 +25,7 @@ speed_topbottom = =math.ceil(speed_print * 35/55) speed_layer_0 = =math.ceil(speed_print * 23/55) speed_slowdown_layers = 2 cool_fan_enabled = True -cool_fan_speed = 50 +cool_fan_speed = 35 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg index 8ccf14195a..94560d5a22 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg @@ -25,7 +25,7 @@ speed_topbottom = =math.ceil(speed_print * 37/60) speed_layer_0 = =math.ceil(speed_print * 25/60) speed_slowdown_layers = 2 cool_fan_enabled = True -cool_fan_speed = 50 +cool_fan_speed = 35 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 From 2ecf2d019bb206020c7fcec45615bad34096c677 Mon Sep 17 00:00:00 2001 From: KOUBeMT <51325289+KOUBeMT@users.noreply.github.com> Date: Wed, 19 Jun 2019 14:24:25 +0200 Subject: [PATCH 08/11] Extruders_rename --- resources/extruders/strateo3d_left_extruder.def.json | 2 +- resources/extruders/strateo3d_right_extruder.def.json | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/resources/extruders/strateo3d_left_extruder.def.json b/resources/extruders/strateo3d_left_extruder.def.json index d3b59d794b..1df8eb0ebb 100644 --- a/resources/extruders/strateo3d_left_extruder.def.json +++ b/resources/extruders/strateo3d_left_extruder.def.json @@ -1,7 +1,7 @@ { "id": "strateo3d_left_extruder", "version": 2, - "name": "Left Extruder", + "name": "Left Extruder 2", "inherits": "fdmextruder", "metadata": { "machine": "strateo3d", diff --git a/resources/extruders/strateo3d_right_extruder.def.json b/resources/extruders/strateo3d_right_extruder.def.json index 227df73ad0..ea59870329 100644 --- a/resources/extruders/strateo3d_right_extruder.def.json +++ b/resources/extruders/strateo3d_right_extruder.def.json @@ -1,7 +1,7 @@ { "id": "strateo3d_right_extruder", "version": 2, - "name": "Right Extruder", + "name": "Right Extruder 1", "inherits": "fdmextruder", "metadata": { "machine": "strateo3d", From 6d0bb01bd57eab4c0aa52d27c2ef291c6d392fc0 Mon Sep 17 00:00:00 2001 From: KOUBeMT <51325289+KOUBeMT@users.noreply.github.com> Date: Thu, 20 Jun 2019 16:12:22 +0200 Subject: [PATCH 09/11] Quality_&_Variant_setting_version_update --- .../Standard_0.4/s3d_std0.4_ABS_A.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_ABS_B.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_ABS_C.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_PETG_A.inst.cfg | 4 ++-- .../Standard_0.4/s3d_std0.4_PETG_B.inst.cfg | 4 ++-- .../Standard_0.4/s3d_std0.4_PETG_C.inst.cfg | 4 ++-- .../Standard_0.4/s3d_std0.4_PLA_A.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_PLA_B.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_PLA_C.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_TPU98A_A.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_TPU98A_B.inst.cfg | 2 +- .../Standard_0.4/s3d_std0.4_TPU98A_C.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_ABS_B.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_ABS_C.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_ABS_D.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_ASA-X_B.inst.cfg | 6 +++--- .../Standard_0.6/s3d_std0.6_ASA-X_C.inst.cfg | 6 +++--- .../Standard_0.6/s3d_std0.6_ASA-X_D.inst.cfg | 8 ++++---- .../Standard_0.6/s3d_std0.6_Nylon-1030_C.inst.cfg | 14 +++++++------- .../Standard_0.6/s3d_std0.6_PETG_B.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_PETG_C.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_PETG_D.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_PLA_B.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_PLA_C.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_PLA_D.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_TPU98A_B.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_TPU98A_C.inst.cfg | 2 +- .../Standard_0.6/s3d_std0.6_TPU98A_D.inst.cfg | 2 +- .../Standard_0.8/s3d_std0.8_ABS_C.inst.cfg | 2 +- .../Standard_0.8/s3d_std0.8_ABS_D.inst.cfg | 2 +- .../Standard_0.8/s3d_std0.8_ABS_E.inst.cfg | 2 +- .../Standard_0.8/s3d_std0.8_PETG_C.inst.cfg | 2 +- .../Standard_0.8/s3d_std0.8_PETG_D.inst.cfg | 2 +- .../Standard_0.8/s3d_std0.8_PETG_E.inst.cfg | 2 +- .../Standard_0.8/s3d_std0.8_PLA_C.inst.cfg | 2 +- .../Standard_0.8/s3d_std0.8_PLA_D.inst.cfg | 2 +- .../Standard_0.8/s3d_std0.8_PLA_E.inst.cfg | 2 +- .../Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg | 2 +- .../Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg | 2 +- .../Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg | 2 +- .../Standard_0.8/s3d_std0.8_TPU_C.inst.cfg | 2 +- .../Standard_0.8/s3d_std0.8_TPU_D.inst.cfg | 2 +- .../Standard_0.8/s3d_std0.8_TPU_E.inst.cfg | 2 +- .../Standard_1.2/s3d_std1.2_PLA_H.inst.cfg | 2 +- resources/quality/strateo3d/s3d_global_A.inst.cfg | 2 +- resources/quality/strateo3d/s3d_global_B.inst.cfg | 2 +- resources/quality/strateo3d/s3d_global_C.inst.cfg | 2 +- resources/quality/strateo3d/s3d_global_D.inst.cfg | 2 +- resources/quality/strateo3d/s3d_global_E.inst.cfg | 4 ++-- resources/quality/strateo3d/s3d_global_F.inst.cfg | 2 +- resources/quality/strateo3d/s3d_global_G.inst.cfg | 2 +- resources/quality/strateo3d/s3d_global_H.inst.cfg | 2 +- resources/variants/strateo3d_standard_04.inst.cfg | 2 +- resources/variants/strateo3d_standard_06.inst.cfg | 2 +- 72 files changed, 89 insertions(+), 89 deletions(-) diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg index 9e22f937bc..dcdba79b45 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg @@ -4,7 +4,7 @@ name = A definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = a weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg index 2b93cc75b5..e490e09fd7 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg @@ -4,7 +4,7 @@ name = B definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = b weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg index 1c85299412..1dfc84489f 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_A.inst.cfg index 5380a4850f..1e141d6f13 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_A.inst.cfg @@ -4,7 +4,7 @@ name = A definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = a weight = 1 @@ -34,7 +34,7 @@ cool_min_speed = 10 support_angle = 65 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 91 +material_flow = 97 retraction_extra_prime_amount = 0 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_B.inst.cfg index 86dfb3ef46..40365612f4 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_B.inst.cfg @@ -4,7 +4,7 @@ name = B definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = b weight = 0 @@ -34,7 +34,7 @@ cool_min_speed = 10 support_angle = 60 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -material_flow = 91 +material_flow = 97 retraction_extra_prime_amount = 0 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_C.inst.cfg index b3ed16bb75..3e67c4012b 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = -1 @@ -34,7 +34,7 @@ cool_min_speed = 10 support_angle = 55 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -material_flow = 91 +material_flow = 97 retraction_extra_prime_amount = 0 retraction_min_travel = =3*line_width retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg index 2f8f7c4bfc..2fd4cc4429 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg @@ -4,7 +4,7 @@ name = A definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = a weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg index 90be6ac776..01c2e2a870 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg @@ -4,7 +4,7 @@ name = B definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = b weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg index e47a6f04a0..21682761c5 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg index 5a7f160aff..865c00d71a 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg @@ -4,7 +4,7 @@ name = A definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = a weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg index 87a0a94109..12aecc88ab 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg @@ -4,7 +4,7 @@ name = B definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = b weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg index 0137fa4570..8b75c227ea 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg index 4a25700f16..b229bb886b 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg @@ -4,7 +4,7 @@ name = A definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = a weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg index 7ec05e2205..d792f5ae5e 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg @@ -4,7 +4,7 @@ name = B definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = b weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg index 1a0e6ee70f..3611a472b9 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg index b8f3efe568..7e3bef7406 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg @@ -4,7 +4,7 @@ name = A definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = a weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg index 8e660b7b74..b379e5eaee 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg @@ -4,7 +4,7 @@ name = B definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = b weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg index a19f11225e..a764081715 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_A.inst.cfg index 604f73f67c..d7300e971c 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_A.inst.cfg @@ -4,7 +4,7 @@ name = A definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = a weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_B.inst.cfg index 50d7007419..e7bd0dbfd1 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_B.inst.cfg @@ -4,7 +4,7 @@ name = B definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = b weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_C.inst.cfg index ac1e22489d..3180729c72 100644 --- a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg index 2cfba65957..e9f70f90c0 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg @@ -4,7 +4,7 @@ name = B definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = b weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg index 817e38af88..054dd9fe6c 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg index 94560d5a22..0ca7f6b5aa 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg @@ -4,7 +4,7 @@ name = D definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = d weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_B.inst.cfg index d5a6e45963..f79f8b19e0 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_B.inst.cfg @@ -4,7 +4,7 @@ name = B definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = b weight = 1 @@ -22,10 +22,10 @@ speed_print = 55 speed_wall = =math.ceil(speed_print * 3/4) speed_wall_0 = =math.ceil(speed_wall * 2/3) speed_topbottom = =math.ceil(speed_print * 2/3) -speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_layer_0 = =math.ceil(speed_print * 25/55) speed_slowdown_layers = 2 cool_fan_enabled = True -cool_fan_speed = 50 +cool_fan_speed = 40 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_C.inst.cfg index 47ec9e88e0..13d0bb8bf3 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = 0 @@ -22,10 +22,10 @@ speed_print = 60 speed_wall = =math.ceil(speed_print * 3/4) speed_wall_0 = =math.ceil(speed_wall * 2/3) speed_topbottom = =math.ceil(speed_print * 2/3) -speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_layer_0 = =math.ceil(speed_print * 27/60) speed_slowdown_layers = 2 cool_fan_enabled = True -cool_fan_speed = 50 +cool_fan_speed = 40 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_D.inst.cfg index 3f9528cb4d..a207ab0438 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_D.inst.cfg @@ -4,7 +4,7 @@ name = D definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = d weight = -1 @@ -20,12 +20,12 @@ support_line_width = =machine_nozzle_size/machine_nozzle_size*0.53 wall_0_wipe_dist = =machine_nozzle_size/2 speed_print = 65 speed_wall = =math.ceil(speed_print * 3/4) -speed_wall_0 = =math.ceil(speed_wall * 2/3) +speed_wall_0 = =math.ceil(speed_wall * 3/4) speed_topbottom = =math.ceil(speed_print * 2/3) -speed_layer_0 = =math.ceil(speed_print * 0.5) +speed_layer_0 = =math.ceil(speed_print * 30/65) speed_slowdown_layers = 2 cool_fan_enabled = True -cool_fan_speed = 50 +cool_fan_speed = 40 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 20 cool_min_layer_time = 11 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_Nylon-1030_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_Nylon-1030_C.inst.cfg index 16febe6cad..e38975a85e 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_Nylon-1030_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_Nylon-1030_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = 0 @@ -18,11 +18,11 @@ wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.6 infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.7 support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6 wall_0_wipe_dist = =machine_nozzle_size/2 -speed_print = 60 -speed_wall = =math.ceil(speed_print * 30/60) -speed_wall_0 = =math.ceil(speed_print * 23/60) -speed_topbottom = =math.ceil(speed_print * 30/60) -speed_layer_0 = =math.ceil(speed_print * 20/60) +speed_print = 55 +speed_wall = =math.ceil(speed_print * 40/55) +speed_wall_0 = =math.ceil(speed_wall * 30/40) +speed_topbottom = =math.ceil(speed_print * 35/55) +speed_layer_0 = =math.ceil(speed_print * 23/55) speed_slowdown_layers = 2 cool_fan_enabled = True cool_fan_speed = 35 @@ -32,7 +32,7 @@ cool_min_layer_time = 11 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_min_speed = 10 support_angle = 55 -material_print_temperature = =default_material_print_temperature + 8 +material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 material_flow = 93 retraction_extra_prime_amount = 0 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_B.inst.cfg index 4d5d6f50e5..d13f4c89d0 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_B.inst.cfg @@ -4,7 +4,7 @@ name = B definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = b weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_C.inst.cfg index 47834bf58f..47361ab1ac 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_D.inst.cfg index f3a1ee8335..2b877e786b 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_D.inst.cfg @@ -4,7 +4,7 @@ name = D definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = d weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_B.inst.cfg index 9e1418e19b..2e1a08ecca 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_B.inst.cfg @@ -4,7 +4,7 @@ name = B definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = b weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_C.inst.cfg index 900b35a677..b51c44edb0 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_D.inst.cfg index 8fc917fa9b..e3cd07ccb6 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_D.inst.cfg @@ -4,7 +4,7 @@ name = D definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = d weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg index c3d67b70c3..e1858b3343 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg @@ -4,7 +4,7 @@ name = B definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = b weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg index ddde828252..d7cc60868b 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg index 505ee183ea..5214dab77e 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg @@ -4,7 +4,7 @@ name = D definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = d weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg index 229eafee39..e565aa053f 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg @@ -4,7 +4,7 @@ name = B definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = b weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg index b53da2b016..5306f1bc8f 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg index ea93e23b78..7986e8f289 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg @@ -4,7 +4,7 @@ name = D definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = d weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg index 8a1d787043..38b5e25b24 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg @@ -4,7 +4,7 @@ name = B definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = b weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg index 778d13f6fa..bae7932184 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg index b4b89a8f2b..a782e3f1a6 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg @@ -4,7 +4,7 @@ name = D definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = d weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_B.inst.cfg index ea4e6af87f..824c9297aa 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_B.inst.cfg @@ -4,7 +4,7 @@ name = B definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = b weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_C.inst.cfg index 7655025553..30d03356b6 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_D.inst.cfg index 2ed874dcc8..baa179d6c9 100644 --- a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_D.inst.cfg @@ -4,7 +4,7 @@ name = D definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = d weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg index d108b49387..106bf05af4 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg index be7dc9e4d5..4e7d19e1d7 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg @@ -4,7 +4,7 @@ name = D definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = d weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg index b030983ba4..693c4e3d09 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg @@ -4,7 +4,7 @@ name = E definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = e weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_C.inst.cfg index f59341929a..148b3fc309 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_D.inst.cfg index fc549d5200..58991f5de9 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_D.inst.cfg @@ -4,7 +4,7 @@ name = D definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = d weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_E.inst.cfg index 2099dee307..ab38f97ece 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_E.inst.cfg @@ -4,7 +4,7 @@ name = E definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = e weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_C.inst.cfg index 01683d8376..5ae5415636 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_D.inst.cfg index ff3849b17f..7094088e4f 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_D.inst.cfg @@ -4,7 +4,7 @@ name = D definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = d weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_E.inst.cfg index aaff46baeb..de9c0e8c16 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_E.inst.cfg @@ -4,7 +4,7 @@ name = E definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = e weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg index d8775a20df..604a3ffd96 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg index 749caf38a6..781edd7385 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg @@ -4,7 +4,7 @@ name = D definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = d weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg index 8314799002..7c5508bf51 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg @@ -4,7 +4,7 @@ name = E definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = e weight = -1 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_C.inst.cfg index 6509ee4b68..65e29556f3 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_C.inst.cfg @@ -4,7 +4,7 @@ name = C definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = 1 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_D.inst.cfg index f6fd55eb13..42a49fb9c1 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_D.inst.cfg @@ -4,7 +4,7 @@ name = D definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = d weight = 0 diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_E.inst.cfg index 2b1928c418..90bbf7cd51 100644 --- a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_E.inst.cfg @@ -4,7 +4,7 @@ name = E definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = e weight = -1 diff --git a/resources/quality/strateo3d/Standard_1.2/s3d_std1.2_PLA_H.inst.cfg b/resources/quality/strateo3d/Standard_1.2/s3d_std1.2_PLA_H.inst.cfg index ef9d7409e4..2ebc3c7c0d 100644 --- a/resources/quality/strateo3d/Standard_1.2/s3d_std1.2_PLA_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1.2/s3d_std1.2_PLA_H.inst.cfg @@ -4,7 +4,7 @@ name = H definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = h weight = -1 diff --git a/resources/quality/strateo3d/s3d_global_A.inst.cfg b/resources/quality/strateo3d/s3d_global_A.inst.cfg index 9a972ff1d9..7613bcf774 100644 --- a/resources/quality/strateo3d/s3d_global_A.inst.cfg +++ b/resources/quality/strateo3d/s3d_global_A.inst.cfg @@ -4,7 +4,7 @@ name = Extra Fine Quality definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = a weight = 0 diff --git a/resources/quality/strateo3d/s3d_global_B.inst.cfg b/resources/quality/strateo3d/s3d_global_B.inst.cfg index c9cb8b219a..d8f48314c8 100644 --- a/resources/quality/strateo3d/s3d_global_B.inst.cfg +++ b/resources/quality/strateo3d/s3d_global_B.inst.cfg @@ -4,7 +4,7 @@ name = Fine Quality definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = b weight = 0 diff --git a/resources/quality/strateo3d/s3d_global_C.inst.cfg b/resources/quality/strateo3d/s3d_global_C.inst.cfg index 7c3a0953b6..7ff3be17ca 100644 --- a/resources/quality/strateo3d/s3d_global_C.inst.cfg +++ b/resources/quality/strateo3d/s3d_global_C.inst.cfg @@ -4,7 +4,7 @@ name = High Quality definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = c weight = 0 diff --git a/resources/quality/strateo3d/s3d_global_D.inst.cfg b/resources/quality/strateo3d/s3d_global_D.inst.cfg index d5620092b7..52cd3033d2 100644 --- a/resources/quality/strateo3d/s3d_global_D.inst.cfg +++ b/resources/quality/strateo3d/s3d_global_D.inst.cfg @@ -4,7 +4,7 @@ name = Medium Quality definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = d weight = 0 diff --git a/resources/quality/strateo3d/s3d_global_E.inst.cfg b/resources/quality/strateo3d/s3d_global_E.inst.cfg index 34de855053..f4d499b64a 100644 --- a/resources/quality/strateo3d/s3d_global_E.inst.cfg +++ b/resources/quality/strateo3d/s3d_global_E.inst.cfg @@ -4,11 +4,11 @@ name = Low Quality definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = e weight = 0 global_quality = True [values] -layer_height = 0.5 +layer_height = 0.5 \ No newline at end of file diff --git a/resources/quality/strateo3d/s3d_global_F.inst.cfg b/resources/quality/strateo3d/s3d_global_F.inst.cfg index 99f1de8283..4b8fe2b3e7 100644 --- a/resources/quality/strateo3d/s3d_global_F.inst.cfg +++ b/resources/quality/strateo3d/s3d_global_F.inst.cfg @@ -4,7 +4,7 @@ name = Coarse Quality definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = f weight = 0 diff --git a/resources/quality/strateo3d/s3d_global_G.inst.cfg b/resources/quality/strateo3d/s3d_global_G.inst.cfg index 56db6800a8..0f6d613c7c 100644 --- a/resources/quality/strateo3d/s3d_global_G.inst.cfg +++ b/resources/quality/strateo3d/s3d_global_G.inst.cfg @@ -4,7 +4,7 @@ name = Extra Coarse Quality definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = g weight = 0 diff --git a/resources/quality/strateo3d/s3d_global_H.inst.cfg b/resources/quality/strateo3d/s3d_global_H.inst.cfg index a594bc7b50..921fe39749 100644 --- a/resources/quality/strateo3d/s3d_global_H.inst.cfg +++ b/resources/quality/strateo3d/s3d_global_H.inst.cfg @@ -4,7 +4,7 @@ name = Ultra Coarse Quality definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = quality quality_type = h weight = 0 diff --git a/resources/variants/strateo3d_standard_04.inst.cfg b/resources/variants/strateo3d_standard_04.inst.cfg index f48df8dd8d..2e5afb4190 100644 --- a/resources/variants/strateo3d_standard_04.inst.cfg +++ b/resources/variants/strateo3d_standard_04.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = variant hardware_type = nozzle diff --git a/resources/variants/strateo3d_standard_06.inst.cfg b/resources/variants/strateo3d_standard_06.inst.cfg index 7c96ac0847..a148d2414d 100644 --- a/resources/variants/strateo3d_standard_06.inst.cfg +++ b/resources/variants/strateo3d_standard_06.inst.cfg @@ -4,7 +4,7 @@ version = 4 definition = strateo3d [metadata] -setting_version = 7 +setting_version = 8 type = variant hardware_type = nozzle From 11270b91426aecbf6ae91089d5facbb39c71f311 Mon Sep 17 00:00:00 2001 From: KOUBeMT <51325289+KOUBeMT@users.noreply.github.com> Date: Fri, 21 Jun 2019 11:19:45 +0200 Subject: [PATCH 10/11] Top_Bottom_layers_number_fix --- resources/quality/strateo3d/s3d_global_A.inst.cfg | 3 ++- resources/quality/strateo3d/s3d_global_B.inst.cfg | 3 ++- resources/quality/strateo3d/s3d_global_C.inst.cfg | 3 ++- resources/quality/strateo3d/s3d_global_D.inst.cfg | 3 ++- resources/quality/strateo3d/s3d_global_E.inst.cfg | 3 ++- resources/quality/strateo3d/s3d_global_F.inst.cfg | 1 + resources/quality/strateo3d/s3d_global_G.inst.cfg | 1 + resources/quality/strateo3d/s3d_global_H.inst.cfg | 1 + resources/variants/strateo3d_standard_04.inst.cfg | 3 +-- resources/variants/strateo3d_standard_06.inst.cfg | 3 +-- 10 files changed, 15 insertions(+), 9 deletions(-) diff --git a/resources/quality/strateo3d/s3d_global_A.inst.cfg b/resources/quality/strateo3d/s3d_global_A.inst.cfg index 7613bcf774..5c39d27c4b 100644 --- a/resources/quality/strateo3d/s3d_global_A.inst.cfg +++ b/resources/quality/strateo3d/s3d_global_A.inst.cfg @@ -11,4 +11,5 @@ weight = 0 global_quality = True [values] -layer_height = 0.1 \ No newline at end of file +layer_height = 0.1 +top_bottom_thickness = =10*layer_height \ No newline at end of file diff --git a/resources/quality/strateo3d/s3d_global_B.inst.cfg b/resources/quality/strateo3d/s3d_global_B.inst.cfg index d8f48314c8..7d5c69e18b 100644 --- a/resources/quality/strateo3d/s3d_global_B.inst.cfg +++ b/resources/quality/strateo3d/s3d_global_B.inst.cfg @@ -11,4 +11,5 @@ weight = 0 global_quality = True [values] -layer_height = 0.2 \ No newline at end of file +layer_height = 0.2 +top_bottom_thickness = =7*layer_height \ No newline at end of file diff --git a/resources/quality/strateo3d/s3d_global_C.inst.cfg b/resources/quality/strateo3d/s3d_global_C.inst.cfg index 7ff3be17ca..8a1b0cf374 100644 --- a/resources/quality/strateo3d/s3d_global_C.inst.cfg +++ b/resources/quality/strateo3d/s3d_global_C.inst.cfg @@ -11,4 +11,5 @@ weight = 0 global_quality = True [values] -layer_height = 0.3 \ No newline at end of file +layer_height = 0.3 +top_bottom_thickness = =5*layer_height \ No newline at end of file diff --git a/resources/quality/strateo3d/s3d_global_D.inst.cfg b/resources/quality/strateo3d/s3d_global_D.inst.cfg index 52cd3033d2..73379db500 100644 --- a/resources/quality/strateo3d/s3d_global_D.inst.cfg +++ b/resources/quality/strateo3d/s3d_global_D.inst.cfg @@ -11,4 +11,5 @@ weight = 0 global_quality = True [values] -layer_height = 0.4 \ No newline at end of file +layer_height = 0.4 +top_bottom_thickness = =5*layer_height \ No newline at end of file diff --git a/resources/quality/strateo3d/s3d_global_E.inst.cfg b/resources/quality/strateo3d/s3d_global_E.inst.cfg index f4d499b64a..f0378ac2a0 100644 --- a/resources/quality/strateo3d/s3d_global_E.inst.cfg +++ b/resources/quality/strateo3d/s3d_global_E.inst.cfg @@ -11,4 +11,5 @@ weight = 0 global_quality = True [values] -layer_height = 0.5 \ No newline at end of file +layer_height = 0.5 +top_bottom_thickness = =4*layer_height \ No newline at end of file diff --git a/resources/quality/strateo3d/s3d_global_F.inst.cfg b/resources/quality/strateo3d/s3d_global_F.inst.cfg index 4b8fe2b3e7..22ee65b9ab 100644 --- a/resources/quality/strateo3d/s3d_global_F.inst.cfg +++ b/resources/quality/strateo3d/s3d_global_F.inst.cfg @@ -12,3 +12,4 @@ global_quality = True [values] layer_height = 0.6 +top_bottom_thickness = =4*layer_height diff --git a/resources/quality/strateo3d/s3d_global_G.inst.cfg b/resources/quality/strateo3d/s3d_global_G.inst.cfg index 0f6d613c7c..e2c430d178 100644 --- a/resources/quality/strateo3d/s3d_global_G.inst.cfg +++ b/resources/quality/strateo3d/s3d_global_G.inst.cfg @@ -12,3 +12,4 @@ global_quality = True [values] layer_height = 0.7 +top_bottom_thickness = =3*layer_height diff --git a/resources/quality/strateo3d/s3d_global_H.inst.cfg b/resources/quality/strateo3d/s3d_global_H.inst.cfg index 921fe39749..8bef923923 100644 --- a/resources/quality/strateo3d/s3d_global_H.inst.cfg +++ b/resources/quality/strateo3d/s3d_global_H.inst.cfg @@ -12,3 +12,4 @@ global_quality = True [values] layer_height = 0.8 +top_bottom_thickness = =3*layer_height diff --git a/resources/variants/strateo3d_standard_04.inst.cfg b/resources/variants/strateo3d_standard_04.inst.cfg index 2e5afb4190..86db486d3b 100644 --- a/resources/variants/strateo3d_standard_04.inst.cfg +++ b/resources/variants/strateo3d_standard_04.inst.cfg @@ -17,5 +17,4 @@ layer_height_0 = 0.3 prime_tower_enable = True retract_at_layer_change = False support_angle = 60 -support_use_towers = True -top_bottom_thickness = =4*layer_height \ No newline at end of file +support_use_towers = True \ No newline at end of file diff --git a/resources/variants/strateo3d_standard_06.inst.cfg b/resources/variants/strateo3d_standard_06.inst.cfg index a148d2414d..6f50af1e6c 100644 --- a/resources/variants/strateo3d_standard_06.inst.cfg +++ b/resources/variants/strateo3d_standard_06.inst.cfg @@ -17,5 +17,4 @@ layer_height_0 = 0.4 prime_tower_enable = True retract_at_layer_change = False support_angle = 55 -support_use_towers = True -top_bottom_thickness = =4*layer_height \ No newline at end of file +support_use_towers = True \ No newline at end of file From d444b404fb6b03381fed7b5638b07d44f0300248 Mon Sep 17 00:00:00 2001 From: KOUBeMT <51325289+KOUBeMT@users.noreply.github.com> Date: Wed, 26 Jun 2019 12:05:18 +0200 Subject: [PATCH 11/11] Pause_script_emotiontech_delete --- .../PostProcessingPlugin/scripts/Pause_emt.py | 68 ------------------- 1 file changed, 68 deletions(-) delete mode 100644 plugins/PostProcessingPlugin/scripts/Pause_emt.py diff --git a/plugins/PostProcessingPlugin/scripts/Pause_emt.py b/plugins/PostProcessingPlugin/scripts/Pause_emt.py deleted file mode 100644 index c736ee2065..0000000000 --- a/plugins/PostProcessingPlugin/scripts/Pause_emt.py +++ /dev/null @@ -1,68 +0,0 @@ -# Copyright (c) 2019 Ultimaker B.V. -# The PostProcessingPlugin is released under the terms of the AGPLv3 or higher. - -from typing import Optional, Tuple - -from UM.Logger import Logger -from ..Script import Script - -class Pause_emt(Script): - - _layer_keyword = ";LAYER:" - - def __init__(self): - super().__init__() - - def getSettingDataString(self): - return """{ - "name":"Pause (eMotionTech Printers)", - "key": "Pause_emt", - "metadata": {}, - "version": 2, - "settings": - { - "layer_number": - { - "label": "Layer", - "description": "At what layer should pause occur. This will be before the layer starts printing.", - "unit": "", - "type": "str", - "default_value": "1" - } - } - }""" - - def execute(self, data: list): - - """data is a list. Each index contains a layer""" - layer_nums = self.getSettingValueByKey("layer_number") - - pause = "M600" - pause = pause + " ; Generated by PauseStrateo3d plugin" - - layer_targets = layer_nums.split(",") - if len(layer_targets) > 0: - for layer_num in layer_targets: - layer_num = int(layer_num.strip()) - if layer_num <= len(data): - index, layer_data = self._searchLayerData(data, layer_num - 1) - if layer_data is None: - Logger.log("e", "Layer not found") - continue - lines = layer_data.split("\n") - lines.insert(2, pause) - final_line = "\n".join(lines) - data[index] = final_line - return data - - ## This method returns the data corresponding with the indicated layer number, looking in the gcode for - # the occurrence of this layer number. - def _searchLayerData(self, data: list, layer_num: int) -> Tuple[int, Optional[str]]: - for index, layer_data in enumerate(data): - first_line = layer_data.split("\n")[0] - # The first line should contain the layer number at the beginning. - if first_line[:len(self._layer_keyword)] == self._layer_keyword: - # If found the layer that we are looking for, then return the data - if first_line[len(self._layer_keyword):] == str(layer_num): - return index, layer_data - return 0, None