From 2d72d52ee39583334c679af3d9e359a66ec6110c Mon Sep 17 00:00:00 2001 From: MaukCC Date: Fri, 7 Apr 2017 12:59:43 +0200 Subject: [PATCH 01/31] Update cartesio_extruder_1.def.json --- resources/extruders/cartesio_extruder_1.def.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/extruders/cartesio_extruder_1.def.json b/resources/extruders/cartesio_extruder_1.def.json index d8c2e00aed..59bb836c41 100644 --- a/resources/extruders/cartesio_extruder_1.def.json +++ b/resources/extruders/cartesio_extruder_1.def.json @@ -19,7 +19,7 @@ "default_value": "\n;start extruder_1\n\nM117 printing\n" }, "machine_extruder_end_code": { - "default_value": "\nM104 T1 S155\nG91\nG1 Z0.5 F900\nG90\nG1 X1 Y260 F9000\n;end extruder_1\n" + "default_value": "\nM104 T1 S155\nG91\nG1 Z0.5 F900\nG90\nG1 X10 Y260 F9000\n;end extruder_1\n" } } } From 4b1fbebfd1e974c91c5b69315b40c86fd6201809 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Fri, 7 Apr 2017 12:59:58 +0200 Subject: [PATCH 02/31] Update cartesio_extruder_2.def.json --- resources/extruders/cartesio_extruder_2.def.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/extruders/cartesio_extruder_2.def.json b/resources/extruders/cartesio_extruder_2.def.json index 062b80581c..cac78698ad 100644 --- a/resources/extruders/cartesio_extruder_2.def.json +++ b/resources/extruders/cartesio_extruder_2.def.json @@ -19,7 +19,7 @@ "default_value": "\n;start extruder_2\n\nM117 printing\n" }, "machine_extruder_end_code": { - "default_value": "\nM104 T2 S155\nG91\nG1 Z0.5 F900\nG90\nG1 X1 Y260 F9000\n;end extruder_2\n" + "default_value": "\nM104 T2 S155\nG91\nG1 Z0.5 F900\nG90\nG1 X10 Y260 F9000\n;end extruder_2\n" } } } From 074bae1ed874db9484131d73c10fe1eae0bd6b4f Mon Sep 17 00:00:00 2001 From: MaukCC Date: Fri, 7 Apr 2017 13:00:11 +0200 Subject: [PATCH 03/31] Update cartesio_extruder_3.def.json --- resources/extruders/cartesio_extruder_3.def.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/extruders/cartesio_extruder_3.def.json b/resources/extruders/cartesio_extruder_3.def.json index 5582f0f436..bb4f93cb7c 100644 --- a/resources/extruders/cartesio_extruder_3.def.json +++ b/resources/extruders/cartesio_extruder_3.def.json @@ -19,7 +19,7 @@ "default_value": "\n;start extruder_3\n\nM117 printing\n" }, "machine_extruder_end_code": { - "default_value": "\nM104 T3 S155\nG91\nG1 Z0.5 F900\nG90\nG1 X1 Y260 F9000\n;end extruder_3\n" + "default_value": "\nM104 T3 S155\nG91\nG1 Z0.5 F900\nG90\nG1 X10 Y260 F9000\n;end extruder_3\n" } } } From e1fd7a59187303928f3521f3d90ab83eb3ceaad1 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Fri, 7 Apr 2017 13:00:21 +0200 Subject: [PATCH 04/31] Update cartesio_extruder_0.def.json --- resources/extruders/cartesio_extruder_0.def.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/extruders/cartesio_extruder_0.def.json b/resources/extruders/cartesio_extruder_0.def.json index 7dc3aaa8af..bd6b656777 100644 --- a/resources/extruders/cartesio_extruder_0.def.json +++ b/resources/extruders/cartesio_extruder_0.def.json @@ -19,7 +19,7 @@ "default_value": "\n;start extruder_0\n\nM117 printing\n" }, "machine_extruder_end_code": { - "default_value": "\nM104 T0 S155\nG91\nG1 Z0.5 F900\nG90\nG1 X1 Y260 F9000\n;end extruder_0\nM117 temp is {material_print_temp}" + "default_value": "\nM104 T0 S155\nG91\nG1 Z0.5 F900\nG90\nG1 X10 Y260 F9000\n;end extruder_0\nM117 temp is {material_print_temp}" } } } From 05808fb0dbe7ed80e807dc8a0f77bf2d7905cd1a Mon Sep 17 00:00:00 2001 From: MaukCC Date: Fri, 7 Apr 2017 13:03:05 +0200 Subject: [PATCH 05/31] Update cartesio_extruder_0.def.json --- resources/extruders/cartesio_extruder_0.def.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/extruders/cartesio_extruder_0.def.json b/resources/extruders/cartesio_extruder_0.def.json index bd6b656777..65db56403c 100644 --- a/resources/extruders/cartesio_extruder_0.def.json +++ b/resources/extruders/cartesio_extruder_0.def.json @@ -19,7 +19,7 @@ "default_value": "\n;start extruder_0\n\nM117 printing\n" }, "machine_extruder_end_code": { - "default_value": "\nM104 T0 S155\nG91\nG1 Z0.5 F900\nG90\nG1 X10 Y260 F9000\n;end extruder_0\nM117 temp is {material_print_temp}" + "default_value": "\nM104 T0 S160\nG91\nG1 Z0.5 F900\nG90\nG1 X10 Y260 F9000\n;end extruder_0\nM117 temp is {material_print_temp}" } } } From 9097dd6955020f9f49d464caef89e09623ca1532 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Fri, 7 Apr 2017 13:03:15 +0200 Subject: [PATCH 06/31] Update cartesio_extruder_1.def.json --- resources/extruders/cartesio_extruder_1.def.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/extruders/cartesio_extruder_1.def.json b/resources/extruders/cartesio_extruder_1.def.json index 59bb836c41..a6f353cf73 100644 --- a/resources/extruders/cartesio_extruder_1.def.json +++ b/resources/extruders/cartesio_extruder_1.def.json @@ -19,7 +19,7 @@ "default_value": "\n;start extruder_1\n\nM117 printing\n" }, "machine_extruder_end_code": { - "default_value": "\nM104 T1 S155\nG91\nG1 Z0.5 F900\nG90\nG1 X10 Y260 F9000\n;end extruder_1\n" + "default_value": "\nM104 T1 S160\nG91\nG1 Z0.5 F900\nG90\nG1 X10 Y260 F9000\n;end extruder_1\n" } } } From 892f0b4bfe70daf0ee9edb00a99f24755fb78467 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Fri, 7 Apr 2017 13:03:24 +0200 Subject: [PATCH 07/31] Update cartesio_extruder_2.def.json --- resources/extruders/cartesio_extruder_2.def.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/extruders/cartesio_extruder_2.def.json b/resources/extruders/cartesio_extruder_2.def.json index cac78698ad..0a2cc072f9 100644 --- a/resources/extruders/cartesio_extruder_2.def.json +++ b/resources/extruders/cartesio_extruder_2.def.json @@ -19,7 +19,7 @@ "default_value": "\n;start extruder_2\n\nM117 printing\n" }, "machine_extruder_end_code": { - "default_value": "\nM104 T2 S155\nG91\nG1 Z0.5 F900\nG90\nG1 X10 Y260 F9000\n;end extruder_2\n" + "default_value": "\nM104 T2 S160\nG91\nG1 Z0.5 F900\nG90\nG1 X10 Y260 F9000\n;end extruder_2\n" } } } From eb72d15eb67e0628ea279ec1748c7d4743b5c276 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Fri, 7 Apr 2017 13:03:32 +0200 Subject: [PATCH 08/31] Update cartesio_extruder_3.def.json --- resources/extruders/cartesio_extruder_3.def.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/extruders/cartesio_extruder_3.def.json b/resources/extruders/cartesio_extruder_3.def.json index bb4f93cb7c..691ef5935b 100644 --- a/resources/extruders/cartesio_extruder_3.def.json +++ b/resources/extruders/cartesio_extruder_3.def.json @@ -19,7 +19,7 @@ "default_value": "\n;start extruder_3\n\nM117 printing\n" }, "machine_extruder_end_code": { - "default_value": "\nM104 T3 S155\nG91\nG1 Z0.5 F900\nG90\nG1 X10 Y260 F9000\n;end extruder_3\n" + "default_value": "\nM104 T3 S160\nG91\nG1 Z0.5 F900\nG90\nG1 X10 Y260 F9000\n;end extruder_3\n" } } } From 39befe1c226cd9c8804c8598f648c0744382664e Mon Sep 17 00:00:00 2001 From: MaukCC Date: Fri, 7 Apr 2017 13:06:14 +0200 Subject: [PATCH 09/31] Update cartesio.def.json --- resources/definitions/cartesio.def.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/definitions/cartesio.def.json b/resources/definitions/cartesio.def.json index d0904b9716..c84e7c1bd8 100644 --- a/resources/definitions/cartesio.def.json +++ b/resources/definitions/cartesio.def.json @@ -42,7 +42,7 @@ "infill_pattern": { "default_value": "grid"}, "prime_tower_enable": { "default_value": true }, "prime_tower_wall_thickness": { "resolve": 0.7 }, - "prime_tower_position_x": { "default_value": 30 }, + "prime_tower_position_x": { "default_value": 50 }, "prime_tower_position_y": { "default_value": 71 }, "machine_start_gcode": { "default_value": "\nM104 S120 T1\nM104 S120 T2\nM104 S120 T3\n\nM92 E159\n\nG21\nG90\nM42 S255 P13;chamber lights\nM42 S255 P12;fume extraction\n\nM117 Homing Y ......\nG28 Y\nM117 Homing X ......\nG28 X\nM117 Homing Z ......\nG28 Z F100\nG1 Z10 F600\nG1 X70 Y20 F9000;go to wipe point\n\nM190 S{material_bed_temperature_layer_0}\n\nM117 Heating for 50 sec.\nG4 S20\nM117 Heating for 30 sec.\nG4 S20\nM117 Heating for 10 sec.\nM300 S600 P1000\nG4 S9\n\nM117 purging nozzle....\nT0\nG92 E0;set E\nG1 E10 F100\nG92 E0\nG1 E-1 F600\n\nM117 wiping nozzle....\nG1 X1 Y24 F3000\nG1 X70 F9000\n\nM104 S21 T1\nM104 S21 T2\nM104 S21 T3\n\nM117 Printing .....\n" From 14e65ae2b86a7395bf583f13d258f5012f645d38 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 10:10:57 +0200 Subject: [PATCH 10/31] Update cartesio.def.json --- resources/definitions/cartesio.def.json | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/resources/definitions/cartesio.def.json b/resources/definitions/cartesio.def.json index c84e7c1bd8..bbae84c2a5 100644 --- a/resources/definitions/cartesio.def.json +++ b/resources/definitions/cartesio.def.json @@ -9,12 +9,16 @@ "manufacturer": "Cartesio bv", "category": "Other", "file_formats": "text/x-gcode", + "has_machine_materials": true, + "has_machine_quality": true, "has_variants": true, + "variants_name": "Nozzle size", "preferred_variant": "*0.4*", "preferred_material": "*pla*", "preferred_quality": "*draft*", + "machine_extruder_trains": { "0": "cartesio_extruder_0", From 5069dfbf65d940a92cbca2e0c024a24d78db2458 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 10:32:54 +0200 Subject: [PATCH 11/31] Update cartesio_0.8.inst.cfg --- resources/variants/cartesio_0.8.inst.cfg | 53 ------------------------ 1 file changed, 53 deletions(-) diff --git a/resources/variants/cartesio_0.8.inst.cfg b/resources/variants/cartesio_0.8.inst.cfg index bdaae61af5..d84a45e615 100644 --- a/resources/variants/cartesio_0.8.inst.cfg +++ b/resources/variants/cartesio_0.8.inst.cfg @@ -10,56 +10,3 @@ type = variant [values] machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 1.05 - -infill_line_width = 0.9 - -wall_thickness = 2.4 -top_bottom_thickness = =0.8 if layer_height < 0.3 else (layer_height * 3) -wall_0_inset = -0.05 -fill_perimeter_gaps = nowhere -travel_compensate_overlapping_walls_enabled = - -infill_sparse_density = 24 -infill_pattern = grid - -material_print_temperature_layer_0 = =round(material_print_temperature) -material_initial_print_temperature = =round(material_print_temperature) -material_diameter = 1.75 -retraction_amount = 1.5 -retraction_prime_speed = =round(retraction_speed / 5) -retraction_min_travel = =round(line_width * 10) -switch_extruder_retraction_amount = 2 -switch_extruder_retraction_speeds = =round(retraction_speed) -switch_extruder_prime_speed = =round(retraction_prime_speed) - -speed_print = =50 if layer_height < 0.4 else 30 -speed_infill = =round(speed_print) -speed_layer_0 = =round(speed_print / 5 * 4) -speed_wall = =round(speed_print / 2) -speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) -speed_topbottom = =round(speed_print / 5 * 4) -speed_slowdown_layers = 1 -speed_travel = =round(speed_print if magic_spiralize else 150) -speed_travel_layer_0 = =round(speed_travel) -speed_support_interface = =round(speed_topbottom) - -retraction_combing = off -retraction_hop_enabled = True -retraction_hop = 1 - -cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time) -cool_min_layer_time = 20 - -support_z_distance = 0 -support_xy_distance = 0.5 -support_join_distance = 10 -support_interface_enable = True - -adhesion_type = skirt -skirt_gap = 0.5 -skirt_brim_minimal_length = 50 - -coasting_enable = True -coasting_volume = 0.1 -coasting_min_volume = 0.17 -coasting_speed = 90 From 952fce4eda35cf5076955f0ccff2a89c74fd9030 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 10:33:24 +0200 Subject: [PATCH 12/31] Update cartesio_0.4.inst.cfg --- resources/variants/cartesio_0.4.inst.cfg | 53 ------------------------ 1 file changed, 53 deletions(-) diff --git a/resources/variants/cartesio_0.4.inst.cfg b/resources/variants/cartesio_0.4.inst.cfg index 3462133717..43bed9bfbd 100644 --- a/resources/variants/cartesio_0.4.inst.cfg +++ b/resources/variants/cartesio_0.4.inst.cfg @@ -10,56 +10,3 @@ type = variant [values] machine_nozzle_size = 0.4 machine_nozzle_tip_outer_diameter = 0.8 - -infill_line_width = 0.5 - -wall_thickness = 1.2 -top_bottom_thickness = 0.8 -wall_0_inset = -0.05 -fill_perimeter_gaps = nowhere -travel_compensate_overlapping_walls_enabled = - -infill_sparse_density = 40 -infill_pattern = grid - -material_print_temperature_layer_0 = =round(material_print_temperature) -material_initial_print_temperature = =round(material_print_temperature) -material_diameter = 1.75 -retraction_amount = 1 -retraction_prime_speed = =round(retraction_speed / 5) -retraction_min_travel = =round(line_width * 10) -switch_extruder_retraction_amount = 2 -switch_extruder_retraction_speeds = =round(retraction_speed) -switch_extruder_prime_speed = =round(retraction_prime_speed) - -speed_print = 50 -speed_infill = =round(speed_print) -speed_layer_0 = =round(speed_print / 5 * 4) -speed_wall = =round(speed_print / 2) -speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) -speed_topbottom = =round(speed_print / 5 * 4) -speed_slowdown_layers = 1 -speed_travel = =round(speed_print if magic_spiralize else 150) -speed_travel_layer_0 = =round(speed_travel) -speed_support_interface = =round(speed_topbottom) - -retraction_combing = off -retraction_hop_enabled = True -retraction_hop = 1 - -cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time) -cool_min_layer_time = 20 - -support_z_distance = 0 -support_xy_distance = 0.5 -support_join_distance = 10 -support_interface_enable = True - -adhesion_type = skirt -skirt_gap = 0.5 -skirt_brim_minimal_length = 50 - -coasting_enable = True -coasting_volume = 0.1 -coasting_min_volume = 0.17 -coasting_speed = 90 From 1f4bc708cac802ac3b1c065bdcdb77f43fc14ee6 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 10:33:44 +0200 Subject: [PATCH 13/31] Update cartesio_0.25.inst.cfg --- resources/variants/cartesio_0.25.inst.cfg | 53 ----------------------- 1 file changed, 53 deletions(-) diff --git a/resources/variants/cartesio_0.25.inst.cfg b/resources/variants/cartesio_0.25.inst.cfg index b64f5121a8..2c7ecc7b03 100644 --- a/resources/variants/cartesio_0.25.inst.cfg +++ b/resources/variants/cartesio_0.25.inst.cfg @@ -10,56 +10,3 @@ type = variant [values] machine_nozzle_size = 0.25 machine_nozzle_tip_outer_diameter = 1.05 - -infill_line_width = 0.3 - -wall_thickness = 1 -top_bottom_thickness = 0.8 -wall_0_inset = -0.05 -fill_perimeter_gaps = nowhere -travel_compensate_overlapping_walls_enabled = - -infill_sparse_density = 40 -infill_pattern = grid - -material_print_temperature_layer_0 = =round(material_print_temperature) -material_initial_print_temperature = =round(material_print_temperature) -material_diameter = 1.75 -retraction_amount = 1 -retraction_prime_speed = =round(retraction_speed / 5) -retraction_min_travel = =round(line_width * 10) -switch_extruder_retraction_amount = 2 -switch_extruder_retraction_speeds = =round(retraction_speed) -switch_extruder_prime_speed = =round(retraction_prime_speed) - -speed_print = =50 if layer_height < 0.4 else 30 -speed_infill = =round(speed_print) -speed_layer_0 = =round(speed_print / 5 * 4) -speed_wall = =round(speed_print / 2) -speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) -speed_topbottom = =round(speed_print / 5 * 4) -speed_slowdown_layers = 1 -speed_travel = =round(speed_print if magic_spiralize else 150) -speed_travel_layer_0 = =round(speed_travel) -speed_support_interface = =round(speed_topbottom) - -retraction_combing = off -retraction_hop_enabled = True -retraction_hop = 1 - -cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time) -cool_min_layer_time = 20 - -support_z_distance = 0 -support_xy_distance = 0.5 -support_join_distance = 10 -support_interface_enable = True - -adhesion_type = skirt -skirt_gap = 0.5 -skirt_brim_minimal_length = 50 - -coasting_enable = True -coasting_volume = 0.1 -coasting_min_volume = 0.17 -coasting_speed = 90 From 8da7fbb11901ac06668221a600cbdafb70174d4b Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 10:43:36 +0200 Subject: [PATCH 14/31] Create cartesio_0.4_pla_draft.inst.cfg --- .../cartesio/cartesio_0.4_pla_draft.inst.cfg | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 resources/quality/cartesio/cartesio_0.4_pla_draft.inst.cfg diff --git a/resources/quality/cartesio/cartesio_0.4_pla_draft.inst.cfg b/resources/quality/cartesio/cartesio_0.4_pla_draft.inst.cfg new file mode 100644 index 0000000000..5cf4a1d7d4 --- /dev/null +++ b/resources/quality/cartesio/cartesio_0.4_pla_draft.inst.cfg @@ -0,0 +1,67 @@ +[general] +version = 2 +name = Draft Print +definition = cartesio + +[metadata] +type = quality +quality_type = draft +material = generic_pla_cartesio_0.4_mm +weight = 0 + +[values] +layer_height = 0.2 +infill_line_width = 0.5 + +wall_thickness = 1.2 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +default_material_print_temperature = =material_print_temperature +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_amount = 1 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =round(retraction_speed) +switch_extruder_prime_speed = =round(retraction_prime_speed) + +speed_print = 50 +speed_infill = =round(speed_print) +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =round(speed_travel) +speed_support_interface = =round(speed_topbottom) + +retraction_combing = off +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time) +cool_min_layer_time = 20 + +support_z_distance = 0 +support_xy_distance = 0.5 +support_join_distance = 10 +support_interface_enable = True + +adhesion_type = skirt +skirt_gap = 0.5 +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 From d0cc5c1a0cf152f27922cc938a9ad05e3693694b Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 10:44:29 +0200 Subject: [PATCH 15/31] Update cartesio.def.json --- resources/definitions/cartesio.def.json | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/resources/definitions/cartesio.def.json b/resources/definitions/cartesio.def.json index bbae84c2a5..28953ae1e3 100644 --- a/resources/definitions/cartesio.def.json +++ b/resources/definitions/cartesio.def.json @@ -10,8 +10,10 @@ "category": "Other", "file_formats": "text/x-gcode", - "has_machine_materials": true, "has_machine_quality": true, + "has_materials": true, + "has_machine_materials": true, + "has_variant_materials": true, "has_variants": true, "variants_name": "Nozzle size", From a6346b1277e49446a3235a16226ba0830dcd32af Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 10:45:17 +0200 Subject: [PATCH 16/31] Add files via upload --- .../cartesio/cartesio_0.25_pla_draft.inst.cfg | 65 +++++++++++++++++++ .../cartesio/cartesio_0.8_pla_draft.inst.cfg | 65 +++++++++++++++++++ 2 files changed, 130 insertions(+) create mode 100644 resources/quality/cartesio/cartesio_0.25_pla_draft.inst.cfg create mode 100644 resources/quality/cartesio/cartesio_0.8_pla_draft.inst.cfg diff --git a/resources/quality/cartesio/cartesio_0.25_pla_draft.inst.cfg b/resources/quality/cartesio/cartesio_0.25_pla_draft.inst.cfg new file mode 100644 index 0000000000..62002d3229 --- /dev/null +++ b/resources/quality/cartesio/cartesio_0.25_pla_draft.inst.cfg @@ -0,0 +1,65 @@ +[general] +version = 2 +name = Draft Print +definition = cartesio + +[metadata] +type = quality +quality_type = draft +material = generic_pla_cartesio_0.4_mm +weight = 0 + +[values] +layer_height = 0.2 +infill_line_width = 0.3 + +wall_thickness = 1 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =round(material_print_temperature) +material_initial_print_temperature = =round(material_print_temperature) +material_diameter = 1.75 +retraction_amount = 1 +retraction_prime_speed = =round(retraction_speed / 5) +retraction_min_travel = =round(line_width * 10) +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =round(retraction_speed) +switch_extruder_prime_speed = =round(retraction_prime_speed) + +speed_print = =50 if layer_height < 0.4 else 30 +speed_infill = =round(speed_print) +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =round(speed_travel) +speed_support_interface = =round(speed_topbottom) + +retraction_combing = off +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time) +cool_min_layer_time = 20 + +support_z_distance = 0 +support_xy_distance = 0.5 +support_join_distance = 10 +support_interface_enable = True + +adhesion_type = skirt +skirt_gap = 0.5 +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/cartesio_0.8_pla_draft.inst.cfg b/resources/quality/cartesio/cartesio_0.8_pla_draft.inst.cfg new file mode 100644 index 0000000000..58e3450cb6 --- /dev/null +++ b/resources/quality/cartesio/cartesio_0.8_pla_draft.inst.cfg @@ -0,0 +1,65 @@ +[general] +version = 2 +name = Draft Print +definition = cartesio + +[metadata] +type = quality +quality_type = draft +material = generic_pla_cartesio_0.4_mm +weight = 0 + +[values] +layer_height = 0.2 +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = =0.8 if layer_height < 0.3 else (layer_height * 3) +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 24 +infill_pattern = grid + +material_print_temperature_layer_0 = =round(material_print_temperature) +material_initial_print_temperature = =round(material_print_temperature) +material_diameter = 1.75 +retraction_amount = 1.5 +retraction_prime_speed = =round(retraction_speed / 5) +retraction_min_travel = =round(line_width * 10) +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =round(retraction_speed) +switch_extruder_prime_speed = =round(retraction_prime_speed) + +speed_print = =50 if layer_height < 0.4 else 30 +speed_infill = =round(speed_print) +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =round(speed_travel) +speed_support_interface = =round(speed_topbottom) + +retraction_combing = off +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time) +cool_min_layer_time = 20 + +support_z_distance = 0 +support_xy_distance = 0.5 +support_join_distance = 10 +support_interface_enable = True + +adhesion_type = skirt +skirt_gap = 0.5 +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 From c41392a101a399720097a1198a37d9b41551a444 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 10:47:15 +0200 Subject: [PATCH 17/31] Update cartesio_0.25_pla_draft.inst.cfg --- resources/quality/cartesio/cartesio_0.25_pla_draft.inst.cfg | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/quality/cartesio/cartesio_0.25_pla_draft.inst.cfg b/resources/quality/cartesio/cartesio_0.25_pla_draft.inst.cfg index 62002d3229..7d4a29fe37 100644 --- a/resources/quality/cartesio/cartesio_0.25_pla_draft.inst.cfg +++ b/resources/quality/cartesio/cartesio_0.25_pla_draft.inst.cfg @@ -6,7 +6,7 @@ definition = cartesio [metadata] type = quality quality_type = draft -material = generic_pla_cartesio_0.4_mm +material = generic_pla_cartesio_0.25_mm weight = 0 [values] From 642dfa9372e38de7d8e3c22ef08cc9005fe9d24a Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 10:47:30 +0200 Subject: [PATCH 18/31] Update cartesio_0.8_pla_draft.inst.cfg --- resources/quality/cartesio/cartesio_0.8_pla_draft.inst.cfg | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/quality/cartesio/cartesio_0.8_pla_draft.inst.cfg b/resources/quality/cartesio/cartesio_0.8_pla_draft.inst.cfg index 58e3450cb6..7b32e1fcb7 100644 --- a/resources/quality/cartesio/cartesio_0.8_pla_draft.inst.cfg +++ b/resources/quality/cartesio/cartesio_0.8_pla_draft.inst.cfg @@ -6,7 +6,7 @@ definition = cartesio [metadata] type = quality quality_type = draft -material = generic_pla_cartesio_0.4_mm +material = generic_pla_cartesio_0.8_mm weight = 0 [values] From 10dbd7e683916dbb039233cbcd0c66741bc8bf8c Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 13:12:55 +0200 Subject: [PATCH 19/31] Update cartesio_0.8.inst.cfg --- resources/variants/cartesio_0.8.inst.cfg | 53 ++++++++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/resources/variants/cartesio_0.8.inst.cfg b/resources/variants/cartesio_0.8.inst.cfg index d84a45e615..bdaae61af5 100644 --- a/resources/variants/cartesio_0.8.inst.cfg +++ b/resources/variants/cartesio_0.8.inst.cfg @@ -10,3 +10,56 @@ type = variant [values] machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 1.05 + +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = =0.8 if layer_height < 0.3 else (layer_height * 3) +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 24 +infill_pattern = grid + +material_print_temperature_layer_0 = =round(material_print_temperature) +material_initial_print_temperature = =round(material_print_temperature) +material_diameter = 1.75 +retraction_amount = 1.5 +retraction_prime_speed = =round(retraction_speed / 5) +retraction_min_travel = =round(line_width * 10) +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =round(retraction_speed) +switch_extruder_prime_speed = =round(retraction_prime_speed) + +speed_print = =50 if layer_height < 0.4 else 30 +speed_infill = =round(speed_print) +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =round(speed_travel) +speed_support_interface = =round(speed_topbottom) + +retraction_combing = off +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time) +cool_min_layer_time = 20 + +support_z_distance = 0 +support_xy_distance = 0.5 +support_join_distance = 10 +support_interface_enable = True + +adhesion_type = skirt +skirt_gap = 0.5 +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 From f019d054221d070fa8c884dde69595cbe209f584 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 13:13:24 +0200 Subject: [PATCH 20/31] Update cartesio_0.25.inst.cfg --- resources/variants/cartesio_0.25.inst.cfg | 53 +++++++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/resources/variants/cartesio_0.25.inst.cfg b/resources/variants/cartesio_0.25.inst.cfg index 2c7ecc7b03..b64f5121a8 100644 --- a/resources/variants/cartesio_0.25.inst.cfg +++ b/resources/variants/cartesio_0.25.inst.cfg @@ -10,3 +10,56 @@ type = variant [values] machine_nozzle_size = 0.25 machine_nozzle_tip_outer_diameter = 1.05 + +infill_line_width = 0.3 + +wall_thickness = 1 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =round(material_print_temperature) +material_initial_print_temperature = =round(material_print_temperature) +material_diameter = 1.75 +retraction_amount = 1 +retraction_prime_speed = =round(retraction_speed / 5) +retraction_min_travel = =round(line_width * 10) +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =round(retraction_speed) +switch_extruder_prime_speed = =round(retraction_prime_speed) + +speed_print = =50 if layer_height < 0.4 else 30 +speed_infill = =round(speed_print) +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =round(speed_travel) +speed_support_interface = =round(speed_topbottom) + +retraction_combing = off +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time) +cool_min_layer_time = 20 + +support_z_distance = 0 +support_xy_distance = 0.5 +support_join_distance = 10 +support_interface_enable = True + +adhesion_type = skirt +skirt_gap = 0.5 +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 From f35a4bf276a0d7374aa83809bcd544b38adcfaf1 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 13:15:09 +0200 Subject: [PATCH 21/31] Update cartesio_0.4.inst.cfg --- resources/variants/cartesio_0.4.inst.cfg | 55 ++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/resources/variants/cartesio_0.4.inst.cfg b/resources/variants/cartesio_0.4.inst.cfg index 43bed9bfbd..58637bbba7 100644 --- a/resources/variants/cartesio_0.4.inst.cfg +++ b/resources/variants/cartesio_0.4.inst.cfg @@ -10,3 +10,58 @@ type = variant [values] machine_nozzle_size = 0.4 machine_nozzle_tip_outer_diameter = 0.8 + +infill_line_width = 0.5 + +wall_thickness = 1.2 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +default_material_print_temperature = =material_print_temperature +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_amount = 1 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =round(retraction_speed) +switch_extruder_prime_speed = =round(retraction_prime_speed) + +speed_print = 30 +speed_infill = =round(speed_print) +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =round(speed_travel) +speed_support_interface = =round(speed_topbottom) + +retraction_combing = off +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time) +cool_min_layer_time = 20 + +support_z_distance = 0 +support_xy_distance = 0.5 +support_join_distance = 10 +support_interface_enable = True + +adhesion_type = skirt +skirt_gap = 0.5 +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 From 3319d077295ad21fedfb2fb51ffbefee968a5599 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 15:02:19 +0200 Subject: [PATCH 22/31] Update cartesio.def.json --- resources/definitions/cartesio.def.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/definitions/cartesio.def.json b/resources/definitions/cartesio.def.json index 28953ae1e3..bcaaa30380 100644 --- a/resources/definitions/cartesio.def.json +++ b/resources/definitions/cartesio.def.json @@ -19,7 +19,7 @@ "variants_name": "Nozzle size", "preferred_variant": "*0.4*", "preferred_material": "*pla*", - "preferred_quality": "*draft*", + "preferred_quality": "*normal*", "machine_extruder_trains": { From 383c62218dd01ed992fc90c2fcb4c92d2c1cc238 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 15:03:59 +0200 Subject: [PATCH 23/31] Update cartesio_0.8.inst.cfg --- resources/variants/cartesio_0.8.inst.cfg | 53 ------------------------ 1 file changed, 53 deletions(-) diff --git a/resources/variants/cartesio_0.8.inst.cfg b/resources/variants/cartesio_0.8.inst.cfg index bdaae61af5..d84a45e615 100644 --- a/resources/variants/cartesio_0.8.inst.cfg +++ b/resources/variants/cartesio_0.8.inst.cfg @@ -10,56 +10,3 @@ type = variant [values] machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 1.05 - -infill_line_width = 0.9 - -wall_thickness = 2.4 -top_bottom_thickness = =0.8 if layer_height < 0.3 else (layer_height * 3) -wall_0_inset = -0.05 -fill_perimeter_gaps = nowhere -travel_compensate_overlapping_walls_enabled = - -infill_sparse_density = 24 -infill_pattern = grid - -material_print_temperature_layer_0 = =round(material_print_temperature) -material_initial_print_temperature = =round(material_print_temperature) -material_diameter = 1.75 -retraction_amount = 1.5 -retraction_prime_speed = =round(retraction_speed / 5) -retraction_min_travel = =round(line_width * 10) -switch_extruder_retraction_amount = 2 -switch_extruder_retraction_speeds = =round(retraction_speed) -switch_extruder_prime_speed = =round(retraction_prime_speed) - -speed_print = =50 if layer_height < 0.4 else 30 -speed_infill = =round(speed_print) -speed_layer_0 = =round(speed_print / 5 * 4) -speed_wall = =round(speed_print / 2) -speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) -speed_topbottom = =round(speed_print / 5 * 4) -speed_slowdown_layers = 1 -speed_travel = =round(speed_print if magic_spiralize else 150) -speed_travel_layer_0 = =round(speed_travel) -speed_support_interface = =round(speed_topbottom) - -retraction_combing = off -retraction_hop_enabled = True -retraction_hop = 1 - -cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time) -cool_min_layer_time = 20 - -support_z_distance = 0 -support_xy_distance = 0.5 -support_join_distance = 10 -support_interface_enable = True - -adhesion_type = skirt -skirt_gap = 0.5 -skirt_brim_minimal_length = 50 - -coasting_enable = True -coasting_volume = 0.1 -coasting_min_volume = 0.17 -coasting_speed = 90 From 2bcbd7415e7b4a277e06893913d7b6f7004b6aa2 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 15:04:15 +0200 Subject: [PATCH 24/31] Update cartesio_0.4.inst.cfg --- resources/variants/cartesio_0.4.inst.cfg | 55 ------------------------ 1 file changed, 55 deletions(-) diff --git a/resources/variants/cartesio_0.4.inst.cfg b/resources/variants/cartesio_0.4.inst.cfg index 58637bbba7..43bed9bfbd 100644 --- a/resources/variants/cartesio_0.4.inst.cfg +++ b/resources/variants/cartesio_0.4.inst.cfg @@ -10,58 +10,3 @@ type = variant [values] machine_nozzle_size = 0.4 machine_nozzle_tip_outer_diameter = 0.8 - -infill_line_width = 0.5 - -wall_thickness = 1.2 -top_bottom_thickness = 0.8 -wall_0_inset = -0.05 -fill_perimeter_gaps = nowhere -travel_compensate_overlapping_walls_enabled = - -infill_sparse_density = 40 -infill_pattern = grid - -default_material_print_temperature = =material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature -material_final_print_temperature = =material_print_temperature -material_diameter = 1.75 -retraction_amount = 1 -retraction_min_travel = =round(line_width * 10) -retraction_prime_speed = 10 -switch_extruder_retraction_amount = 2 -switch_extruder_retraction_speeds = =round(retraction_speed) -switch_extruder_prime_speed = =round(retraction_prime_speed) - -speed_print = 30 -speed_infill = =round(speed_print) -speed_layer_0 = =round(speed_print / 5 * 4) -speed_wall = =round(speed_print / 2) -speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) -speed_topbottom = =round(speed_print / 5 * 4) -speed_slowdown_layers = 1 -speed_travel = =round(speed_print if magic_spiralize else 150) -speed_travel_layer_0 = =round(speed_travel) -speed_support_interface = =round(speed_topbottom) - -retraction_combing = off -retraction_hop_enabled = True -retraction_hop = 1 - -cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time) -cool_min_layer_time = 20 - -support_z_distance = 0 -support_xy_distance = 0.5 -support_join_distance = 10 -support_interface_enable = True - -adhesion_type = skirt -skirt_gap = 0.5 -skirt_brim_minimal_length = 50 - -coasting_enable = True -coasting_volume = 0.1 -coasting_min_volume = 0.17 -coasting_speed = 90 From f6799d64b7704201677009232b92ce807cffd462 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 15:04:39 +0200 Subject: [PATCH 25/31] Update cartesio_0.25.inst.cfg --- resources/variants/cartesio_0.25.inst.cfg | 53 ----------------------- 1 file changed, 53 deletions(-) diff --git a/resources/variants/cartesio_0.25.inst.cfg b/resources/variants/cartesio_0.25.inst.cfg index b64f5121a8..2c7ecc7b03 100644 --- a/resources/variants/cartesio_0.25.inst.cfg +++ b/resources/variants/cartesio_0.25.inst.cfg @@ -10,56 +10,3 @@ type = variant [values] machine_nozzle_size = 0.25 machine_nozzle_tip_outer_diameter = 1.05 - -infill_line_width = 0.3 - -wall_thickness = 1 -top_bottom_thickness = 0.8 -wall_0_inset = -0.05 -fill_perimeter_gaps = nowhere -travel_compensate_overlapping_walls_enabled = - -infill_sparse_density = 40 -infill_pattern = grid - -material_print_temperature_layer_0 = =round(material_print_temperature) -material_initial_print_temperature = =round(material_print_temperature) -material_diameter = 1.75 -retraction_amount = 1 -retraction_prime_speed = =round(retraction_speed / 5) -retraction_min_travel = =round(line_width * 10) -switch_extruder_retraction_amount = 2 -switch_extruder_retraction_speeds = =round(retraction_speed) -switch_extruder_prime_speed = =round(retraction_prime_speed) - -speed_print = =50 if layer_height < 0.4 else 30 -speed_infill = =round(speed_print) -speed_layer_0 = =round(speed_print / 5 * 4) -speed_wall = =round(speed_print / 2) -speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) -speed_topbottom = =round(speed_print / 5 * 4) -speed_slowdown_layers = 1 -speed_travel = =round(speed_print if magic_spiralize else 150) -speed_travel_layer_0 = =round(speed_travel) -speed_support_interface = =round(speed_topbottom) - -retraction_combing = off -retraction_hop_enabled = True -retraction_hop = 1 - -cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time) -cool_min_layer_time = 20 - -support_z_distance = 0 -support_xy_distance = 0.5 -support_join_distance = 10 -support_interface_enable = True - -adhesion_type = skirt -skirt_gap = 0.5 -skirt_brim_minimal_length = 50 - -coasting_enable = True -coasting_volume = 0.1 -coasting_min_volume = 0.17 -coasting_speed = 90 From 99afe3648e4f253ac91211c3ea26c1e1dcd5184d Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 15:05:16 +0200 Subject: [PATCH 26/31] Delete cartesio_0.25_pla_draft.inst.cfg --- .../cartesio/cartesio_0.25_pla_draft.inst.cfg | 65 ------------------- 1 file changed, 65 deletions(-) delete mode 100644 resources/quality/cartesio/cartesio_0.25_pla_draft.inst.cfg diff --git a/resources/quality/cartesio/cartesio_0.25_pla_draft.inst.cfg b/resources/quality/cartesio/cartesio_0.25_pla_draft.inst.cfg deleted file mode 100644 index 7d4a29fe37..0000000000 --- a/resources/quality/cartesio/cartesio_0.25_pla_draft.inst.cfg +++ /dev/null @@ -1,65 +0,0 @@ -[general] -version = 2 -name = Draft Print -definition = cartesio - -[metadata] -type = quality -quality_type = draft -material = generic_pla_cartesio_0.25_mm -weight = 0 - -[values] -layer_height = 0.2 -infill_line_width = 0.3 - -wall_thickness = 1 -top_bottom_thickness = 0.8 -wall_0_inset = -0.05 -fill_perimeter_gaps = nowhere -travel_compensate_overlapping_walls_enabled = - -infill_sparse_density = 40 -infill_pattern = grid - -material_print_temperature_layer_0 = =round(material_print_temperature) -material_initial_print_temperature = =round(material_print_temperature) -material_diameter = 1.75 -retraction_amount = 1 -retraction_prime_speed = =round(retraction_speed / 5) -retraction_min_travel = =round(line_width * 10) -switch_extruder_retraction_amount = 2 -switch_extruder_retraction_speeds = =round(retraction_speed) -switch_extruder_prime_speed = =round(retraction_prime_speed) - -speed_print = =50 if layer_height < 0.4 else 30 -speed_infill = =round(speed_print) -speed_layer_0 = =round(speed_print / 5 * 4) -speed_wall = =round(speed_print / 2) -speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) -speed_topbottom = =round(speed_print / 5 * 4) -speed_slowdown_layers = 1 -speed_travel = =round(speed_print if magic_spiralize else 150) -speed_travel_layer_0 = =round(speed_travel) -speed_support_interface = =round(speed_topbottom) - -retraction_combing = off -retraction_hop_enabled = True -retraction_hop = 1 - -cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time) -cool_min_layer_time = 20 - -support_z_distance = 0 -support_xy_distance = 0.5 -support_join_distance = 10 -support_interface_enable = True - -adhesion_type = skirt -skirt_gap = 0.5 -skirt_brim_minimal_length = 50 - -coasting_enable = True -coasting_volume = 0.1 -coasting_min_volume = 0.17 -coasting_speed = 90 From bcbe7bdbd48fd3558ce20345e3d275c3f4feacf8 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 15:05:28 +0200 Subject: [PATCH 27/31] Delete cartesio_0.4_pla_draft.inst.cfg --- .../cartesio/cartesio_0.4_pla_draft.inst.cfg | 67 ------------------- 1 file changed, 67 deletions(-) delete mode 100644 resources/quality/cartesio/cartesio_0.4_pla_draft.inst.cfg diff --git a/resources/quality/cartesio/cartesio_0.4_pla_draft.inst.cfg b/resources/quality/cartesio/cartesio_0.4_pla_draft.inst.cfg deleted file mode 100644 index 5cf4a1d7d4..0000000000 --- a/resources/quality/cartesio/cartesio_0.4_pla_draft.inst.cfg +++ /dev/null @@ -1,67 +0,0 @@ -[general] -version = 2 -name = Draft Print -definition = cartesio - -[metadata] -type = quality -quality_type = draft -material = generic_pla_cartesio_0.4_mm -weight = 0 - -[values] -layer_height = 0.2 -infill_line_width = 0.5 - -wall_thickness = 1.2 -top_bottom_thickness = 0.8 -wall_0_inset = -0.05 -fill_perimeter_gaps = nowhere -travel_compensate_overlapping_walls_enabled = - -infill_sparse_density = 40 -infill_pattern = grid - -default_material_print_temperature = =material_print_temperature -material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature -material_final_print_temperature = =material_print_temperature -material_diameter = 1.75 -retraction_amount = 1 -retraction_min_travel = =round(line_width * 10) -retraction_prime_speed = 10 -switch_extruder_retraction_amount = 2 -switch_extruder_retraction_speeds = =round(retraction_speed) -switch_extruder_prime_speed = =round(retraction_prime_speed) - -speed_print = 50 -speed_infill = =round(speed_print) -speed_layer_0 = =round(speed_print / 5 * 4) -speed_wall = =round(speed_print / 2) -speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) -speed_topbottom = =round(speed_print / 5 * 4) -speed_slowdown_layers = 1 -speed_travel = =round(speed_print if magic_spiralize else 150) -speed_travel_layer_0 = =round(speed_travel) -speed_support_interface = =round(speed_topbottom) - -retraction_combing = off -retraction_hop_enabled = True -retraction_hop = 1 - -cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time) -cool_min_layer_time = 20 - -support_z_distance = 0 -support_xy_distance = 0.5 -support_join_distance = 10 -support_interface_enable = True - -adhesion_type = skirt -skirt_gap = 0.5 -skirt_brim_minimal_length = 50 - -coasting_enable = True -coasting_volume = 0.1 -coasting_min_volume = 0.17 -coasting_speed = 90 From fb3966d8f55f65c59bb81eb826f5906f33d0d086 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 15:05:38 +0200 Subject: [PATCH 28/31] Delete cartesio_0.8_pla_draft.inst.cfg --- .../cartesio/cartesio_0.8_pla_draft.inst.cfg | 65 ------------------- 1 file changed, 65 deletions(-) delete mode 100644 resources/quality/cartesio/cartesio_0.8_pla_draft.inst.cfg diff --git a/resources/quality/cartesio/cartesio_0.8_pla_draft.inst.cfg b/resources/quality/cartesio/cartesio_0.8_pla_draft.inst.cfg deleted file mode 100644 index 7b32e1fcb7..0000000000 --- a/resources/quality/cartesio/cartesio_0.8_pla_draft.inst.cfg +++ /dev/null @@ -1,65 +0,0 @@ -[general] -version = 2 -name = Draft Print -definition = cartesio - -[metadata] -type = quality -quality_type = draft -material = generic_pla_cartesio_0.8_mm -weight = 0 - -[values] -layer_height = 0.2 -infill_line_width = 0.9 - -wall_thickness = 2.4 -top_bottom_thickness = =0.8 if layer_height < 0.3 else (layer_height * 3) -wall_0_inset = -0.05 -fill_perimeter_gaps = nowhere -travel_compensate_overlapping_walls_enabled = - -infill_sparse_density = 24 -infill_pattern = grid - -material_print_temperature_layer_0 = =round(material_print_temperature) -material_initial_print_temperature = =round(material_print_temperature) -material_diameter = 1.75 -retraction_amount = 1.5 -retraction_prime_speed = =round(retraction_speed / 5) -retraction_min_travel = =round(line_width * 10) -switch_extruder_retraction_amount = 2 -switch_extruder_retraction_speeds = =round(retraction_speed) -switch_extruder_prime_speed = =round(retraction_prime_speed) - -speed_print = =50 if layer_height < 0.4 else 30 -speed_infill = =round(speed_print) -speed_layer_0 = =round(speed_print / 5 * 4) -speed_wall = =round(speed_print / 2) -speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) -speed_topbottom = =round(speed_print / 5 * 4) -speed_slowdown_layers = 1 -speed_travel = =round(speed_print if magic_spiralize else 150) -speed_travel_layer_0 = =round(speed_travel) -speed_support_interface = =round(speed_topbottom) - -retraction_combing = off -retraction_hop_enabled = True -retraction_hop = 1 - -cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time) -cool_min_layer_time = 20 - -support_z_distance = 0 -support_xy_distance = 0.5 -support_join_distance = 10 -support_interface_enable = True - -adhesion_type = skirt -skirt_gap = 0.5 -skirt_brim_minimal_length = 50 - -coasting_enable = True -coasting_volume = 0.1 -coasting_min_volume = 0.17 -coasting_speed = 90 From 46426db8e6e6dfe39a2e8f3d91e657bfbcc9d1c3 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 15:06:23 +0200 Subject: [PATCH 29/31] Create cartesio_global_Coarse_Quality.inst.cfg --- .../cartesio_global_Coarse_Quality.inst.cfg | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 resources/quality/cartesio/cartesio_global_Coarse_Quality.inst.cfg diff --git a/resources/quality/cartesio/cartesio_global_Coarse_Quality.inst.cfg b/resources/quality/cartesio/cartesio_global_Coarse_Quality.inst.cfg new file mode 100644 index 0000000000..1d6f7bb930 --- /dev/null +++ b/resources/quality/cartesio/cartesio_global_Coarse_Quality.inst.cfg @@ -0,0 +1,25 @@ +[general] +version = 2 +name = Coarse Quality +definition = cartesio + +[metadata] +type = quality +quality_type = coarse +global_quality = True +weight = 0 + +[values] +layer_height = 0.4 + +speed_slowdown_layers = 1 + +retraction_combing = off + +support_z_distance = 0 +support_xy_distance = 0.5 +support_join_distance = 10 +support_interface_enable = True + +adhesion_type = skirt +skirt_gap = 0.5 From a78bb88ebc5affedfc12d1fd212f2ad37b812d81 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 15:07:11 +0200 Subject: [PATCH 30/31] Add files via upload --- ...tesio_global_Extra_Coarse_Quality.inst.cfg | 25 +++++++++++++++++++ .../cartesio_global_High_Quality.inst.cfg | 25 +++++++++++++++++++ .../cartesio_global_Normal_Quality.inst.cfg | 25 +++++++++++++++++++ 3 files changed, 75 insertions(+) create mode 100644 resources/quality/cartesio/cartesio_global_Extra_Coarse_Quality.inst.cfg create mode 100644 resources/quality/cartesio/cartesio_global_High_Quality.inst.cfg create mode 100644 resources/quality/cartesio/cartesio_global_Normal_Quality.inst.cfg diff --git a/resources/quality/cartesio/cartesio_global_Extra_Coarse_Quality.inst.cfg b/resources/quality/cartesio/cartesio_global_Extra_Coarse_Quality.inst.cfg new file mode 100644 index 0000000000..841d63d1dc --- /dev/null +++ b/resources/quality/cartesio/cartesio_global_Extra_Coarse_Quality.inst.cfg @@ -0,0 +1,25 @@ +[general] +version = 2 +name = Extra Coarse Quality +definition = cartesio + +[metadata] +type = quality +quality_type = extra coarse +global_quality = True +weight = 0 + +[values] +layer_height = 0.6 + +speed_slowdown_layers = 1 + +retraction_combing = off + +support_z_distance = 0 +support_xy_distance = 0.5 +support_join_distance = 10 +support_interface_enable = True + +adhesion_type = skirt +skirt_gap = 0.5 diff --git a/resources/quality/cartesio/cartesio_global_High_Quality.inst.cfg b/resources/quality/cartesio/cartesio_global_High_Quality.inst.cfg new file mode 100644 index 0000000000..363c18d8a2 --- /dev/null +++ b/resources/quality/cartesio/cartesio_global_High_Quality.inst.cfg @@ -0,0 +1,25 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +global_quality = True +weight = 0 + +[values] +layer_height = 0.1 + +speed_slowdown_layers = 1 + +retraction_combing = off + +support_z_distance = 0 +support_xy_distance = 0.5 +support_join_distance = 10 +support_interface_enable = True + +adhesion_type = skirt +skirt_gap = 0.5 diff --git a/resources/quality/cartesio/cartesio_global_Normal_Quality.inst.cfg b/resources/quality/cartesio/cartesio_global_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..78272e2aef --- /dev/null +++ b/resources/quality/cartesio/cartesio_global_Normal_Quality.inst.cfg @@ -0,0 +1,25 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +global_quality = True +weight = 0 + +[values] +layer_height = 0.2 + +speed_slowdown_layers = 1 + +retraction_combing = off + +support_z_distance = 0 +support_xy_distance = 0.5 +support_join_distance = 10 +support_interface_enable = True + +adhesion_type = skirt +skirt_gap = 0.5 From 0768cea49b383262842384fe310e33bab7c7a6f5 Mon Sep 17 00:00:00 2001 From: MaukCC Date: Wed, 12 Apr 2017 15:08:36 +0200 Subject: [PATCH 31/31] Add files via upload --- .../abs/cartesio_0.25_abs_high.inst.cfg | 56 +++++++++++++++++++ .../abs/cartesio_0.25_abs_normal.inst.cfg | 56 +++++++++++++++++++ .../abs/cartesio_0.4_abs_high.inst.cfg | 56 +++++++++++++++++++ .../abs/cartesio_0.4_abs_normal.inst.cfg | 56 +++++++++++++++++++ .../abs/cartesio_0.8_abs_coarse.inst.cfg | 56 +++++++++++++++++++ .../cartesio_0.8_abs_extra_coarse.inst.cfg | 56 +++++++++++++++++++ .../abs/cartesio_0.8_abs_high.inst.cfg | 56 +++++++++++++++++++ .../abs/cartesio_0.8_abs_normal.inst.cfg | 56 +++++++++++++++++++ .../hips/cartesio_0.25_hips_high.inst.cfg | 56 +++++++++++++++++++ .../hips/cartesio_0.25_hips_normal.inst.cfg | 56 +++++++++++++++++++ .../hips/cartesio_0.4_hips_high.inst.cfg | 56 +++++++++++++++++++ .../hips/cartesio_0.4_hips_normal.inst.cfg | 56 +++++++++++++++++++ .../hips/cartesio_0.8_hips_coarse.inst.cfg | 56 +++++++++++++++++++ .../cartesio_0.8_hips_extra_coarse.inst.cfg | 56 +++++++++++++++++++ .../hips/cartesio_0.8_hips_high.inst.cfg | 56 +++++++++++++++++++ .../hips/cartesio_0.8_hips_normal.inst.cfg | 56 +++++++++++++++++++ .../nylon/cartesio_0.25_nylon_high.inst.cfg | 56 +++++++++++++++++++ .../nylon/cartesio_0.25_nylon_normal.inst.cfg | 56 +++++++++++++++++++ .../nylon/cartesio_0.4_nylon_high.inst.cfg | 56 +++++++++++++++++++ .../nylon/cartesio_0.4_nylon_normal.inst.cfg | 56 +++++++++++++++++++ .../nylon/cartesio_0.8_nylon_coarse.inst.cfg | 56 +++++++++++++++++++ .../cartesio_0.8_nylon_extra_coarse.inst.cfg | 56 +++++++++++++++++++ .../nylon/cartesio_0.8_nylon_high.inst.cfg | 56 +++++++++++++++++++ .../nylon/cartesio_0.8_nylon_normal.inst.cfg | 56 +++++++++++++++++++ .../pc/cartesio_0.25_pc_high.inst.cfg | 56 +++++++++++++++++++ .../pc/cartesio_0.25_pc_normal.inst.cfg | 56 +++++++++++++++++++ .../cartesio/pc/cartesio_0.4_pc_high.inst.cfg | 56 +++++++++++++++++++ .../pc/cartesio_0.4_pc_normal.inst.cfg | 56 +++++++++++++++++++ .../pc/cartesio_0.8_pc_coarse.inst.cfg | 56 +++++++++++++++++++ .../pc/cartesio_0.8_pc_extra_coarse.inst.cfg | 56 +++++++++++++++++++ .../cartesio/pc/cartesio_0.8_pc_high.inst.cfg | 56 +++++++++++++++++++ .../pc/cartesio_0.8_pc_normal.inst.cfg | 56 +++++++++++++++++++ .../petg/cartesio_0.25_petg_high.inst.cfg | 56 +++++++++++++++++++ .../petg/cartesio_0.25_petg_normal.inst.cfg | 56 +++++++++++++++++++ .../petg/cartesio_0.4_petg_high.inst.cfg | 56 +++++++++++++++++++ .../petg/cartesio_0.4_petg_normal.inst.cfg | 56 +++++++++++++++++++ .../petg/cartesio_0.8_petg_coarse.inst.cfg | 56 +++++++++++++++++++ .../cartesio_0.8_petg_extra_coarse.inst.cfg | 56 +++++++++++++++++++ .../petg/cartesio_0.8_petg_high.inst.cfg | 56 +++++++++++++++++++ .../petg/cartesio_0.8_petg_normal.inst.cfg | 56 +++++++++++++++++++ .../pla/cartesio_0.25_pla_high.inst.cfg | 56 +++++++++++++++++++ .../pla/cartesio_0.25_pla_normal.inst.cfg | 56 +++++++++++++++++++ .../pla/cartesio_0.4_pla_high.inst.cfg | 56 +++++++++++++++++++ .../pla/cartesio_0.4_pla_normal.inst.cfg | 56 +++++++++++++++++++ .../pla/cartesio_0.8_pla_coarse.inst.cfg | 56 +++++++++++++++++++ .../cartesio_0.8_pla_extra_coarse.inst.cfg | 56 +++++++++++++++++++ .../pla/cartesio_0.8_pla_high.inst.cfg | 56 +++++++++++++++++++ .../pla/cartesio_0.8_pla_normal.inst.cfg | 56 +++++++++++++++++++ .../pva/cartesio_0.25_pva_high.inst.cfg | 56 +++++++++++++++++++ .../pva/cartesio_0.25_pva_normal.inst.cfg | 56 +++++++++++++++++++ .../pva/cartesio_0.4_pva_high.inst.cfg | 56 +++++++++++++++++++ .../pva/cartesio_0.4_pva_normal.inst.cfg | 56 +++++++++++++++++++ .../pva/cartesio_0.8_pva_coarse.inst.cfg | 56 +++++++++++++++++++ .../cartesio_0.8_pva_extra_coarse.inst.cfg | 56 +++++++++++++++++++ .../pva/cartesio_0.8_pva_high.inst.cfg | 56 +++++++++++++++++++ .../pva/cartesio_0.8_pva_normal.inst.cfg | 56 +++++++++++++++++++ 56 files changed, 3136 insertions(+) create mode 100644 resources/quality/cartesio/abs/cartesio_0.25_abs_high.inst.cfg create mode 100644 resources/quality/cartesio/abs/cartesio_0.25_abs_normal.inst.cfg create mode 100644 resources/quality/cartesio/abs/cartesio_0.4_abs_high.inst.cfg create mode 100644 resources/quality/cartesio/abs/cartesio_0.4_abs_normal.inst.cfg create mode 100644 resources/quality/cartesio/abs/cartesio_0.8_abs_coarse.inst.cfg create mode 100644 resources/quality/cartesio/abs/cartesio_0.8_abs_extra_coarse.inst.cfg create mode 100644 resources/quality/cartesio/abs/cartesio_0.8_abs_high.inst.cfg create mode 100644 resources/quality/cartesio/abs/cartesio_0.8_abs_normal.inst.cfg create mode 100644 resources/quality/cartesio/hips/cartesio_0.25_hips_high.inst.cfg create mode 100644 resources/quality/cartesio/hips/cartesio_0.25_hips_normal.inst.cfg create mode 100644 resources/quality/cartesio/hips/cartesio_0.4_hips_high.inst.cfg create mode 100644 resources/quality/cartesio/hips/cartesio_0.4_hips_normal.inst.cfg create mode 100644 resources/quality/cartesio/hips/cartesio_0.8_hips_coarse.inst.cfg create mode 100644 resources/quality/cartesio/hips/cartesio_0.8_hips_extra_coarse.inst.cfg create mode 100644 resources/quality/cartesio/hips/cartesio_0.8_hips_high.inst.cfg create mode 100644 resources/quality/cartesio/hips/cartesio_0.8_hips_normal.inst.cfg create mode 100644 resources/quality/cartesio/nylon/cartesio_0.25_nylon_high.inst.cfg create mode 100644 resources/quality/cartesio/nylon/cartesio_0.25_nylon_normal.inst.cfg create mode 100644 resources/quality/cartesio/nylon/cartesio_0.4_nylon_high.inst.cfg create mode 100644 resources/quality/cartesio/nylon/cartesio_0.4_nylon_normal.inst.cfg create mode 100644 resources/quality/cartesio/nylon/cartesio_0.8_nylon_coarse.inst.cfg create mode 100644 resources/quality/cartesio/nylon/cartesio_0.8_nylon_extra_coarse.inst.cfg create mode 100644 resources/quality/cartesio/nylon/cartesio_0.8_nylon_high.inst.cfg create mode 100644 resources/quality/cartesio/nylon/cartesio_0.8_nylon_normal.inst.cfg create mode 100644 resources/quality/cartesio/pc/cartesio_0.25_pc_high.inst.cfg create mode 100644 resources/quality/cartesio/pc/cartesio_0.25_pc_normal.inst.cfg create mode 100644 resources/quality/cartesio/pc/cartesio_0.4_pc_high.inst.cfg create mode 100644 resources/quality/cartesio/pc/cartesio_0.4_pc_normal.inst.cfg create mode 100644 resources/quality/cartesio/pc/cartesio_0.8_pc_coarse.inst.cfg create mode 100644 resources/quality/cartesio/pc/cartesio_0.8_pc_extra_coarse.inst.cfg create mode 100644 resources/quality/cartesio/pc/cartesio_0.8_pc_high.inst.cfg create mode 100644 resources/quality/cartesio/pc/cartesio_0.8_pc_normal.inst.cfg create mode 100644 resources/quality/cartesio/petg/cartesio_0.25_petg_high.inst.cfg create mode 100644 resources/quality/cartesio/petg/cartesio_0.25_petg_normal.inst.cfg create mode 100644 resources/quality/cartesio/petg/cartesio_0.4_petg_high.inst.cfg create mode 100644 resources/quality/cartesio/petg/cartesio_0.4_petg_normal.inst.cfg create mode 100644 resources/quality/cartesio/petg/cartesio_0.8_petg_coarse.inst.cfg create mode 100644 resources/quality/cartesio/petg/cartesio_0.8_petg_extra_coarse.inst.cfg create mode 100644 resources/quality/cartesio/petg/cartesio_0.8_petg_high.inst.cfg create mode 100644 resources/quality/cartesio/petg/cartesio_0.8_petg_normal.inst.cfg create mode 100644 resources/quality/cartesio/pla/cartesio_0.25_pla_high.inst.cfg create mode 100644 resources/quality/cartesio/pla/cartesio_0.25_pla_normal.inst.cfg create mode 100644 resources/quality/cartesio/pla/cartesio_0.4_pla_high.inst.cfg create mode 100644 resources/quality/cartesio/pla/cartesio_0.4_pla_normal.inst.cfg create mode 100644 resources/quality/cartesio/pla/cartesio_0.8_pla_coarse.inst.cfg create mode 100644 resources/quality/cartesio/pla/cartesio_0.8_pla_extra_coarse.inst.cfg create mode 100644 resources/quality/cartesio/pla/cartesio_0.8_pla_high.inst.cfg create mode 100644 resources/quality/cartesio/pla/cartesio_0.8_pla_normal.inst.cfg create mode 100644 resources/quality/cartesio/pva/cartesio_0.25_pva_high.inst.cfg create mode 100644 resources/quality/cartesio/pva/cartesio_0.25_pva_normal.inst.cfg create mode 100644 resources/quality/cartesio/pva/cartesio_0.4_pva_high.inst.cfg create mode 100644 resources/quality/cartesio/pva/cartesio_0.4_pva_normal.inst.cfg create mode 100644 resources/quality/cartesio/pva/cartesio_0.8_pva_coarse.inst.cfg create mode 100644 resources/quality/cartesio/pva/cartesio_0.8_pva_extra_coarse.inst.cfg create mode 100644 resources/quality/cartesio/pva/cartesio_0.8_pva_high.inst.cfg create mode 100644 resources/quality/cartesio/pva/cartesio_0.8_pva_normal.inst.cfg diff --git a/resources/quality/cartesio/abs/cartesio_0.25_abs_high.inst.cfg b/resources/quality/cartesio/abs/cartesio_0.25_abs_high.inst.cfg new file mode 100644 index 0000000000..c26f4a2683 --- /dev/null +++ b/resources/quality/cartesio/abs/cartesio_0.25_abs_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_abs_cartesio_0.25_mm +weight = 1 + +[values] +infill_line_width = 0.3 + +wall_thickness = 1 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/abs/cartesio_0.25_abs_normal.inst.cfg b/resources/quality/cartesio/abs/cartesio_0.25_abs_normal.inst.cfg new file mode 100644 index 0000000000..a7c5677980 --- /dev/null +++ b/resources/quality/cartesio/abs/cartesio_0.25_abs_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_abs_cartesio_0.25_mm +weight = 2 + +[values] +infill_line_width = 0.3 + +wall_thickness = 1 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/abs/cartesio_0.4_abs_high.inst.cfg b/resources/quality/cartesio/abs/cartesio_0.4_abs_high.inst.cfg new file mode 100644 index 0000000000..1287d66e33 --- /dev/null +++ b/resources/quality/cartesio/abs/cartesio_0.4_abs_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_abs_cartesio_0.4_mm +weight = 1 + +[values] +infill_line_width = 0.5 + +wall_thickness = 1.2 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/abs/cartesio_0.4_abs_normal.inst.cfg b/resources/quality/cartesio/abs/cartesio_0.4_abs_normal.inst.cfg new file mode 100644 index 0000000000..62c4e462e7 --- /dev/null +++ b/resources/quality/cartesio/abs/cartesio_0.4_abs_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_abs_cartesio_0.4_mm +weight = 2 + +[values] +infill_line_width = 0.5 + +wall_thickness = 1.2 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/abs/cartesio_0.8_abs_coarse.inst.cfg b/resources/quality/cartesio/abs/cartesio_0.8_abs_coarse.inst.cfg new file mode 100644 index 0000000000..4ae04132dc --- /dev/null +++ b/resources/quality/cartesio/abs/cartesio_0.8_abs_coarse.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Coarse Quality +definition = cartesio + +[metadata] +type = quality +quality_type = coarse +material = generic_abs_cartesio_0.8_mm +weight = 3 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = =layer_height * 3 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 30 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/abs/cartesio_0.8_abs_extra_coarse.inst.cfg b/resources/quality/cartesio/abs/cartesio_0.8_abs_extra_coarse.inst.cfg new file mode 100644 index 0000000000..836c2f8458 --- /dev/null +++ b/resources/quality/cartesio/abs/cartesio_0.8_abs_extra_coarse.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Extra Coarse Quality +definition = cartesio + +[metadata] +type = quality +quality_type = extra coarse +material = generic_abs_cartesio_0.8_mm +weight = 4 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = =layer_height * 3 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 25 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/abs/cartesio_0.8_abs_high.inst.cfg b/resources/quality/cartesio/abs/cartesio_0.8_abs_high.inst.cfg new file mode 100644 index 0000000000..f8e6fac996 --- /dev/null +++ b/resources/quality/cartesio/abs/cartesio_0.8_abs_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_abs_cartesio_0.8_mm +weight = 1 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/abs/cartesio_0.8_abs_normal.inst.cfg b/resources/quality/cartesio/abs/cartesio_0.8_abs_normal.inst.cfg new file mode 100644 index 0000000000..7aade0c846 --- /dev/null +++ b/resources/quality/cartesio/abs/cartesio_0.8_abs_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_abs_cartesio_0.8_mm +weight = 2 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/hips/cartesio_0.25_hips_high.inst.cfg b/resources/quality/cartesio/hips/cartesio_0.25_hips_high.inst.cfg new file mode 100644 index 0000000000..1457945bdb --- /dev/null +++ b/resources/quality/cartesio/hips/cartesio_0.25_hips_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_hips_cartesio_0.25_mm +weight = 1 + +[values] +infill_line_width = 0.3 + +wall_thickness = 1 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/hips/cartesio_0.25_hips_normal.inst.cfg b/resources/quality/cartesio/hips/cartesio_0.25_hips_normal.inst.cfg new file mode 100644 index 0000000000..ac324cf42c --- /dev/null +++ b/resources/quality/cartesio/hips/cartesio_0.25_hips_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_hips_cartesio_0.25_mm +weight = 2 + +[values] +infill_line_width = 0.3 + +wall_thickness = 1 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/hips/cartesio_0.4_hips_high.inst.cfg b/resources/quality/cartesio/hips/cartesio_0.4_hips_high.inst.cfg new file mode 100644 index 0000000000..4f95cd2b8b --- /dev/null +++ b/resources/quality/cartesio/hips/cartesio_0.4_hips_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_hips_cartesio_0.4_mm +weight = 1 + +[values] +infill_line_width = 0.5 + +wall_thickness = 1.2 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/hips/cartesio_0.4_hips_normal.inst.cfg b/resources/quality/cartesio/hips/cartesio_0.4_hips_normal.inst.cfg new file mode 100644 index 0000000000..ac4de67c0c --- /dev/null +++ b/resources/quality/cartesio/hips/cartesio_0.4_hips_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_hips_cartesio_0.4_mm +weight = 2 + +[values] +infill_line_width = 0.5 + +wall_thickness = 1.2 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/hips/cartesio_0.8_hips_coarse.inst.cfg b/resources/quality/cartesio/hips/cartesio_0.8_hips_coarse.inst.cfg new file mode 100644 index 0000000000..beff6ec6f6 --- /dev/null +++ b/resources/quality/cartesio/hips/cartesio_0.8_hips_coarse.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Coarse Quality +definition = cartesio + +[metadata] +type = quality +quality_type = coarse +material = generic_hips_cartesio_0.8_mm +weight = 3 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = =layer_height * 3 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 30 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/hips/cartesio_0.8_hips_extra_coarse.inst.cfg b/resources/quality/cartesio/hips/cartesio_0.8_hips_extra_coarse.inst.cfg new file mode 100644 index 0000000000..ea8edbbdfe --- /dev/null +++ b/resources/quality/cartesio/hips/cartesio_0.8_hips_extra_coarse.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Extra Coarse Quality +definition = cartesio + +[metadata] +type = quality +quality_type = extra coarse +material = generic_hips_cartesio_0.8_mm +weight = 4 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = =layer_height * 3 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 25 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/hips/cartesio_0.8_hips_high.inst.cfg b/resources/quality/cartesio/hips/cartesio_0.8_hips_high.inst.cfg new file mode 100644 index 0000000000..13f139f596 --- /dev/null +++ b/resources/quality/cartesio/hips/cartesio_0.8_hips_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_hips_cartesio_0.8_mm +weight = 1 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/hips/cartesio_0.8_hips_normal.inst.cfg b/resources/quality/cartesio/hips/cartesio_0.8_hips_normal.inst.cfg new file mode 100644 index 0000000000..06b45cd601 --- /dev/null +++ b/resources/quality/cartesio/hips/cartesio_0.8_hips_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_hips_cartesio_0.8_mm +weight = 2 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/nylon/cartesio_0.25_nylon_high.inst.cfg b/resources/quality/cartesio/nylon/cartesio_0.25_nylon_high.inst.cfg new file mode 100644 index 0000000000..569c5a786f --- /dev/null +++ b/resources/quality/cartesio/nylon/cartesio_0.25_nylon_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_nylon_cartesio_0.25_mm +weight = 1 + +[values] +infill_line_width = 0.3 + +wall_thickness = 1 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/nylon/cartesio_0.25_nylon_normal.inst.cfg b/resources/quality/cartesio/nylon/cartesio_0.25_nylon_normal.inst.cfg new file mode 100644 index 0000000000..7ac13e4d60 --- /dev/null +++ b/resources/quality/cartesio/nylon/cartesio_0.25_nylon_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_nylon_cartesio_0.25_mm +weight = 2 + +[values] +infill_line_width = 0.3 + +wall_thickness = 1 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/nylon/cartesio_0.4_nylon_high.inst.cfg b/resources/quality/cartesio/nylon/cartesio_0.4_nylon_high.inst.cfg new file mode 100644 index 0000000000..d294820c39 --- /dev/null +++ b/resources/quality/cartesio/nylon/cartesio_0.4_nylon_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_nylon_cartesio_0.4_mm +weight = 1 + +[values] +infill_line_width = 0.5 + +wall_thickness = 1.2 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/nylon/cartesio_0.4_nylon_normal.inst.cfg b/resources/quality/cartesio/nylon/cartesio_0.4_nylon_normal.inst.cfg new file mode 100644 index 0000000000..dd37e5f46a --- /dev/null +++ b/resources/quality/cartesio/nylon/cartesio_0.4_nylon_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_nylon_cartesio_0.4_mm +weight = 2 + +[values] +infill_line_width = 0.5 + +wall_thickness = 1.2 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/nylon/cartesio_0.8_nylon_coarse.inst.cfg b/resources/quality/cartesio/nylon/cartesio_0.8_nylon_coarse.inst.cfg new file mode 100644 index 0000000000..5d303731d9 --- /dev/null +++ b/resources/quality/cartesio/nylon/cartesio_0.8_nylon_coarse.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Coarse Quality +definition = cartesio + +[metadata] +type = quality +quality_type = coarse +material = generic_nylon_cartesio_0.8_mm +weight = 3 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = =layer_height * 3 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 30 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/nylon/cartesio_0.8_nylon_extra_coarse.inst.cfg b/resources/quality/cartesio/nylon/cartesio_0.8_nylon_extra_coarse.inst.cfg new file mode 100644 index 0000000000..9d015d71bb --- /dev/null +++ b/resources/quality/cartesio/nylon/cartesio_0.8_nylon_extra_coarse.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Extra Coarse Quality +definition = cartesio + +[metadata] +type = quality +quality_type = extra coarse +material = generic_nylon_cartesio_0.8_mm +weight = 4 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = =layer_height * 3 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 25 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/nylon/cartesio_0.8_nylon_high.inst.cfg b/resources/quality/cartesio/nylon/cartesio_0.8_nylon_high.inst.cfg new file mode 100644 index 0000000000..324149f527 --- /dev/null +++ b/resources/quality/cartesio/nylon/cartesio_0.8_nylon_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_nylon_cartesio_0.8_mm +weight = 1 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/nylon/cartesio_0.8_nylon_normal.inst.cfg b/resources/quality/cartesio/nylon/cartesio_0.8_nylon_normal.inst.cfg new file mode 100644 index 0000000000..b7e9920fac --- /dev/null +++ b/resources/quality/cartesio/nylon/cartesio_0.8_nylon_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_nylon_cartesio_0.8_mm +weight = 2 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pc/cartesio_0.25_pc_high.inst.cfg b/resources/quality/cartesio/pc/cartesio_0.25_pc_high.inst.cfg new file mode 100644 index 0000000000..224b4383f0 --- /dev/null +++ b/resources/quality/cartesio/pc/cartesio_0.25_pc_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_pc_cartesio_0.25_mm +weight = 1 + +[values] +infill_line_width = 0.3 + +wall_thickness = 1 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pc/cartesio_0.25_pc_normal.inst.cfg b/resources/quality/cartesio/pc/cartesio_0.25_pc_normal.inst.cfg new file mode 100644 index 0000000000..e3ab6f83d9 --- /dev/null +++ b/resources/quality/cartesio/pc/cartesio_0.25_pc_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_pc_cartesio_0.25_mm +weight = 2 + +[values] +infill_line_width = 0.3 + +wall_thickness = 1 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pc/cartesio_0.4_pc_high.inst.cfg b/resources/quality/cartesio/pc/cartesio_0.4_pc_high.inst.cfg new file mode 100644 index 0000000000..213b94bfaa --- /dev/null +++ b/resources/quality/cartesio/pc/cartesio_0.4_pc_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_pc_cartesio_0.4_mm +weight = 1 + +[values] +infill_line_width = 0.5 + +wall_thickness = 1.2 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pc/cartesio_0.4_pc_normal.inst.cfg b/resources/quality/cartesio/pc/cartesio_0.4_pc_normal.inst.cfg new file mode 100644 index 0000000000..8c258630e1 --- /dev/null +++ b/resources/quality/cartesio/pc/cartesio_0.4_pc_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_pc_cartesio_0.4_mm +weight = 2 + +[values] +infill_line_width = 0.5 + +wall_thickness = 1.2 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pc/cartesio_0.8_pc_coarse.inst.cfg b/resources/quality/cartesio/pc/cartesio_0.8_pc_coarse.inst.cfg new file mode 100644 index 0000000000..8f29b3a679 --- /dev/null +++ b/resources/quality/cartesio/pc/cartesio_0.8_pc_coarse.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Coarse Quality +definition = cartesio + +[metadata] +type = quality +quality_type = coarse +material = generic_pc_cartesio_0.8_mm +weight = 3 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = =layer_height * 3 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 30 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pc/cartesio_0.8_pc_extra_coarse.inst.cfg b/resources/quality/cartesio/pc/cartesio_0.8_pc_extra_coarse.inst.cfg new file mode 100644 index 0000000000..f8238c28b5 --- /dev/null +++ b/resources/quality/cartesio/pc/cartesio_0.8_pc_extra_coarse.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Extra Coarse Quality +definition = cartesio + +[metadata] +type = quality +quality_type = extra coarse +material = generic_pc_cartesio_0.8_mm +weight = 4 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = =layer_height * 3 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 25 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pc/cartesio_0.8_pc_high.inst.cfg b/resources/quality/cartesio/pc/cartesio_0.8_pc_high.inst.cfg new file mode 100644 index 0000000000..ca1acf1e59 --- /dev/null +++ b/resources/quality/cartesio/pc/cartesio_0.8_pc_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_pc_cartesio_0.8_mm +weight = 1 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pc/cartesio_0.8_pc_normal.inst.cfg b/resources/quality/cartesio/pc/cartesio_0.8_pc_normal.inst.cfg new file mode 100644 index 0000000000..54e2f3a8b8 --- /dev/null +++ b/resources/quality/cartesio/pc/cartesio_0.8_pc_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_pc_cartesio_0.8_mm +weight = 2 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/petg/cartesio_0.25_petg_high.inst.cfg b/resources/quality/cartesio/petg/cartesio_0.25_petg_high.inst.cfg new file mode 100644 index 0000000000..324ff40497 --- /dev/null +++ b/resources/quality/cartesio/petg/cartesio_0.25_petg_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_petg_cartesio_0.25_mm +weight = 1 + +[values] +infill_line_width = 0.3 + +wall_thickness = 1 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 8 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/petg/cartesio_0.25_petg_normal.inst.cfg b/resources/quality/cartesio/petg/cartesio_0.25_petg_normal.inst.cfg new file mode 100644 index 0000000000..55a04548bc --- /dev/null +++ b/resources/quality/cartesio/petg/cartesio_0.25_petg_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_petg_cartesio_0.25_mm +weight = 2 + +[values] +infill_line_width = 0.3 + +wall_thickness = 1 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 8 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/petg/cartesio_0.4_petg_high.inst.cfg b/resources/quality/cartesio/petg/cartesio_0.4_petg_high.inst.cfg new file mode 100644 index 0000000000..c6e759c87b --- /dev/null +++ b/resources/quality/cartesio/petg/cartesio_0.4_petg_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_petg_cartesio_0.4_mm +weight = 1 + +[values] +infill_line_width = 0.5 + +wall_thickness = 1.2 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 8 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/petg/cartesio_0.4_petg_normal.inst.cfg b/resources/quality/cartesio/petg/cartesio_0.4_petg_normal.inst.cfg new file mode 100644 index 0000000000..1ad1cc9f5d --- /dev/null +++ b/resources/quality/cartesio/petg/cartesio_0.4_petg_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_petg_cartesio_0.4_mm +weight = 2 + +[values] +infill_line_width = 0.5 + +wall_thickness = 1.2 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 8 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/petg/cartesio_0.8_petg_coarse.inst.cfg b/resources/quality/cartesio/petg/cartesio_0.8_petg_coarse.inst.cfg new file mode 100644 index 0000000000..3df1647d57 --- /dev/null +++ b/resources/quality/cartesio/petg/cartesio_0.8_petg_coarse.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Coarse Quality +definition = cartesio + +[metadata] +type = quality +quality_type = coarse +material = generic_petg_cartesio_0.8_mm +weight = 3 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = =layer_height * 3 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 8 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 30 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/petg/cartesio_0.8_petg_extra_coarse.inst.cfg b/resources/quality/cartesio/petg/cartesio_0.8_petg_extra_coarse.inst.cfg new file mode 100644 index 0000000000..99a3659e18 --- /dev/null +++ b/resources/quality/cartesio/petg/cartesio_0.8_petg_extra_coarse.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Extra Coarse Quality +definition = cartesio + +[metadata] +type = quality +quality_type = extra coarse +material = generic_petg_cartesio_0.8_mm +weight = 4 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = =layer_height * 3 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 8 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 25 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/petg/cartesio_0.8_petg_high.inst.cfg b/resources/quality/cartesio/petg/cartesio_0.8_petg_high.inst.cfg new file mode 100644 index 0000000000..8fc6fc8398 --- /dev/null +++ b/resources/quality/cartesio/petg/cartesio_0.8_petg_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_petg_cartesio_0.8_mm +weight = 1 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 8 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/petg/cartesio_0.8_petg_normal.inst.cfg b/resources/quality/cartesio/petg/cartesio_0.8_petg_normal.inst.cfg new file mode 100644 index 0000000000..05805e41d7 --- /dev/null +++ b/resources/quality/cartesio/petg/cartesio_0.8_petg_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_petg_cartesio_0.8_mm +weight = 2 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 8 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pla/cartesio_0.25_pla_high.inst.cfg b/resources/quality/cartesio/pla/cartesio_0.25_pla_high.inst.cfg new file mode 100644 index 0000000000..3eac407634 --- /dev/null +++ b/resources/quality/cartesio/pla/cartesio_0.25_pla_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_pla_cartesio_0.25_mm +weight = 1 + +[values] +infill_line_width = 0.3 + +wall_thickness = 1 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pla/cartesio_0.25_pla_normal.inst.cfg b/resources/quality/cartesio/pla/cartesio_0.25_pla_normal.inst.cfg new file mode 100644 index 0000000000..ac82dddf8a --- /dev/null +++ b/resources/quality/cartesio/pla/cartesio_0.25_pla_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_pla_cartesio_0.25_mm +weight = 2 + +[values] +infill_line_width = 0.3 + +wall_thickness = 1 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pla/cartesio_0.4_pla_high.inst.cfg b/resources/quality/cartesio/pla/cartesio_0.4_pla_high.inst.cfg new file mode 100644 index 0000000000..bdb6ace957 --- /dev/null +++ b/resources/quality/cartesio/pla/cartesio_0.4_pla_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_pla_cartesio_0.4_mm +weight = 1 + +[values] +infill_line_width = 0.5 + +wall_thickness = 1.2 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pla/cartesio_0.4_pla_normal.inst.cfg b/resources/quality/cartesio/pla/cartesio_0.4_pla_normal.inst.cfg new file mode 100644 index 0000000000..ca02ffc4a2 --- /dev/null +++ b/resources/quality/cartesio/pla/cartesio_0.4_pla_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_pla_cartesio_0.4_mm +weight = 2 + +[values] +infill_line_width = 0.5 + +wall_thickness = 1.2 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pla/cartesio_0.8_pla_coarse.inst.cfg b/resources/quality/cartesio/pla/cartesio_0.8_pla_coarse.inst.cfg new file mode 100644 index 0000000000..5a9e561177 --- /dev/null +++ b/resources/quality/cartesio/pla/cartesio_0.8_pla_coarse.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Coarse Quality +definition = cartesio + +[metadata] +type = quality +quality_type = coarse +material = generic_pla_cartesio_0.8_mm +weight = 3 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = =layer_height * 3 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 30 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pla/cartesio_0.8_pla_extra_coarse.inst.cfg b/resources/quality/cartesio/pla/cartesio_0.8_pla_extra_coarse.inst.cfg new file mode 100644 index 0000000000..4ac73a3ce0 --- /dev/null +++ b/resources/quality/cartesio/pla/cartesio_0.8_pla_extra_coarse.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Extra Coarse Quality +definition = cartesio + +[metadata] +type = quality +quality_type = extra coarse +material = generic_pla_cartesio_0.8_mm +weight = 4 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = =layer_height * 3 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 25 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pla/cartesio_0.8_pla_high.inst.cfg b/resources/quality/cartesio/pla/cartesio_0.8_pla_high.inst.cfg new file mode 100644 index 0000000000..582735062b --- /dev/null +++ b/resources/quality/cartesio/pla/cartesio_0.8_pla_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_pla_cartesio_0.8_mm +weight = 1 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pla/cartesio_0.8_pla_normal.inst.cfg b/resources/quality/cartesio/pla/cartesio_0.8_pla_normal.inst.cfg new file mode 100644 index 0000000000..f77e2ade8c --- /dev/null +++ b/resources/quality/cartesio/pla/cartesio_0.8_pla_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_pla_cartesio_0.8_mm +weight = 2 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 10 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pva/cartesio_0.25_pva_high.inst.cfg b/resources/quality/cartesio/pva/cartesio_0.25_pva_high.inst.cfg new file mode 100644 index 0000000000..73b434365e --- /dev/null +++ b/resources/quality/cartesio/pva/cartesio_0.25_pva_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_pva_cartesio_0.25_mm +weight = 1 + +[values] +infill_line_width = 0.3 + +wall_thickness = 1 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 8 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pva/cartesio_0.25_pva_normal.inst.cfg b/resources/quality/cartesio/pva/cartesio_0.25_pva_normal.inst.cfg new file mode 100644 index 0000000000..1415954e6c --- /dev/null +++ b/resources/quality/cartesio/pva/cartesio_0.25_pva_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_pva_cartesio_0.25_mm +weight = 2 + +[values] +infill_line_width = 0.3 + +wall_thickness = 1 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 8 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pva/cartesio_0.4_pva_high.inst.cfg b/resources/quality/cartesio/pva/cartesio_0.4_pva_high.inst.cfg new file mode 100644 index 0000000000..97e48f8c7d --- /dev/null +++ b/resources/quality/cartesio/pva/cartesio_0.4_pva_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_pva_cartesio_0.4_mm +weight = 1 + +[values] +infill_line_width = 0.5 + +wall_thickness = 1.2 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 8 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pva/cartesio_0.4_pva_normal.inst.cfg b/resources/quality/cartesio/pva/cartesio_0.4_pva_normal.inst.cfg new file mode 100644 index 0000000000..f0231084db --- /dev/null +++ b/resources/quality/cartesio/pva/cartesio_0.4_pva_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_pva_cartesio_0.4_mm +weight = 2 + +[values] +infill_line_width = 0.5 + +wall_thickness = 1.2 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 8 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pva/cartesio_0.8_pva_coarse.inst.cfg b/resources/quality/cartesio/pva/cartesio_0.8_pva_coarse.inst.cfg new file mode 100644 index 0000000000..a9c313a7db --- /dev/null +++ b/resources/quality/cartesio/pva/cartesio_0.8_pva_coarse.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Coarse Quality +definition = cartesio + +[metadata] +type = quality +quality_type = coarse +material = generic_pva_cartesio_0.8_mm +weight = 3 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = =layer_height * 3 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 8 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 30 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pva/cartesio_0.8_pva_extra_coarse.inst.cfg b/resources/quality/cartesio/pva/cartesio_0.8_pva_extra_coarse.inst.cfg new file mode 100644 index 0000000000..2a2e2c9d0e --- /dev/null +++ b/resources/quality/cartesio/pva/cartesio_0.8_pva_extra_coarse.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Extra Coarse Quality +definition = cartesio + +[metadata] +type = quality +quality_type = extra coarse +material = generic_pva_cartesio_0.8_mm +weight = 4 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = =layer_height * 3 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 8 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 25 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pva/cartesio_0.8_pva_high.inst.cfg b/resources/quality/cartesio/pva/cartesio_0.8_pva_high.inst.cfg new file mode 100644 index 0000000000..64e8ee2902 --- /dev/null +++ b/resources/quality/cartesio/pva/cartesio_0.8_pva_high.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = High Quality +definition = cartesio + +[metadata] +type = quality +quality_type = high +material = generic_pva_cartesio_0.8_mm +weight = 1 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 8 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90 diff --git a/resources/quality/cartesio/pva/cartesio_0.8_pva_normal.inst.cfg b/resources/quality/cartesio/pva/cartesio_0.8_pva_normal.inst.cfg new file mode 100644 index 0000000000..23fa682772 --- /dev/null +++ b/resources/quality/cartesio/pva/cartesio_0.8_pva_normal.inst.cfg @@ -0,0 +1,56 @@ +[general] +version = 2 +name = Normal Quality +definition = cartesio + +[metadata] +type = quality +quality_type = normal +material = generic_pva_cartesio_0.8_mm +weight = 2 + +[values] +infill_line_width = 0.9 + +wall_thickness = 2.4 +top_bottom_thickness = 0.8 +wall_0_inset = -0.05 +fill_perimeter_gaps = nowhere +travel_compensate_overlapping_walls_enabled = + +infill_sparse_density = 40 +infill_pattern = grid + +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +material_diameter = 1.75 +retraction_min_travel = =round(line_width * 10) +retraction_prime_speed = 8 +switch_extruder_retraction_amount = 2 +switch_extruder_retraction_speeds = =retraction_speed +switch_extruder_prime_speed = =retraction_prime_speed + +speed_print = 50 +speed_infill = =speed_print +speed_layer_0 = =round(speed_print / 5 * 4) +speed_wall = =round(speed_print / 2) +speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3) +speed_topbottom = =round(speed_print / 5 * 4) +speed_slowdown_layers = 1 +speed_travel = =round(speed_print if magic_spiralize else 150) +speed_travel_layer_0 = =speed_travel +speed_support_interface = =speed_topbottom + +retraction_hop_enabled = True +retraction_hop = 1 + +cool_min_layer_time_fan_speed_max = =cool_min_layer_time +cool_min_layer_time = 20 + +skirt_brim_minimal_length = 50 + +coasting_enable = True +coasting_volume = 0.1 +coasting_min_volume = 0.17 +coasting_speed = 90