diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json
index c0c90dc6d7..579197d024 100644
--- a/resources/definitions/fdmprinter.def.json
+++ b/resources/definitions/fdmprinter.def.json
@@ -2327,7 +2327,7 @@
                     "label": "Skin Edge Support Thickness",
                     "description": "The thickness of the extra infill that supports skin edges.",
                     "unit": "mm",
-                    "default_value": 0.8,
+                    "default_value": 0,
                     "minimum_value": "0",
                     "maximum_value": "machine_height",
                     "maximum_value_warning": "resolveOrValue('infill_sparse_thickness') * 10",
@@ -2342,7 +2342,7 @@
                         {
                             "label": "Skin Edge Support Layers",
                             "description": "The number of infill layers that supports skin edges.",
-                            "default_value": 4,
+                            "default_value": 0,
                             "minimum_value": "0",
                             "maximum_value_warning": "10",
                             "type": "int",
@@ -2354,6 +2354,21 @@
                         }
                     }
                 },
+                "extra_infill_lines_to_support_skins":
+                {
+                    "label": "Extra Infill Lines To Support Skins",
+                    "description": "Add extra lines into the infill pattern to support skins above.   This option prevents holes or plastic blobs that sometime show in complex shaped skins due to the infill below not correctly supporting the skin layer being printed above.  'Walls' supports just the outlines of the skin, whereas 'Walls and Lines' also supports the ends of the lines that make up the skin.",
+                    "type": "enum",
+                    "options":
+                    {
+                        "walls_and_lines": "Walls and Lines",
+                        "walls": "Walls Only",
+                        "none": "None"
+                    },
+                    "default_value": "walls_and_lines",
+                    "value": "'none' if infill_sparse_density > 50 else 'walls' if skin_edge_support_thickness > 0 else 'walls_and_lines'",
+                    "enabled": "infill_sparse_density > 0 and infill_pattern not in ('lightning', 'concentric', 'cross','cross_3d') and wall_line_count > 0 and top_layers > 0"
+                },
                 "lightning_infill_support_angle":
                 {
                     "label": "Lightning Infill Support Angle",
diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json
index 48353244be..21e905fdf8 100644
--- a/resources/definitions/ultimaker.def.json
+++ b/resources/definitions/ultimaker.def.json
@@ -111,7 +111,6 @@
         "roofing_layer_count": { "value": "1" },
         "roofing_material_flow": { "value": "material_flow" },
         "skin_angles": { "value": "[] if infill_pattern not in ['cross', 'cross_3d'] else [20, 110]" },
-        "skin_edge_support_thickness": { "value": "4 * layer_height if infill_sparse_density < 30 else 0" },
         "skin_material_flow": { "value": "0.95 * material_flow" },
         "skin_material_flow_layer_0": { "value": "95" },
         "skin_monotonic": { "value": "roofing_layer_count == 0" },
diff --git a/resources/setting_visibility/expert.cfg b/resources/setting_visibility/expert.cfg
index f0ba478a53..9950957081 100644
--- a/resources/setting_visibility/expert.cfg
+++ b/resources/setting_visibility/expert.cfg
@@ -110,6 +110,7 @@ min_skin_width_for_expansion
 infill_randomize_start_location
 skin_edge_support_thickness
 skin_edge_support_layers
+extra_infill_lines_to_support_skins
 
 [material]
 default_material_print_temperature