diff --git a/cura/CrashHandler.py b/cura/CrashHandler.py
index 24df54b74e..d74b48a53a 100644
--- a/cura/CrashHandler.py
+++ b/cura/CrashHandler.py
@@ -14,8 +14,9 @@ import urllib.request
import urllib.error
import shutil
-from PyQt5.QtCore import QT_VERSION_STR, PYQT_VERSION_STR, QFile
+from PyQt5.QtCore import QT_VERSION_STR, PYQT_VERSION_STR, QUrl
from PyQt5.QtWidgets import QDialog, QDialogButtonBox, QVBoxLayout, QLabel, QTextEdit, QGroupBox, QCheckBox, QPushButton
+from PyQt5.QtGui import QDesktopServices
from UM.Application import Application
from UM.Logger import Logger
@@ -91,7 +92,7 @@ class CrashHandler:
label = QLabel()
label.setText(catalog.i18nc("@label crash message", """A fatal error has occurred.
Unfortunately, Cura encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.
- Your backup can be found in your Configuration folder.
+ Backups can be found in the configuration folder.
Please send us this Crash Report to fix the problem.
"""))
label.setWordWrap(True)
@@ -105,8 +106,13 @@ class CrashHandler:
show_details_button.setMaximumWidth(200)
show_details_button.clicked.connect(self._showDetailedReport)
+ show_configuration_folder_button = QPushButton(catalog.i18nc("@action:button", "Show configuration folder"), dialog)
+ show_configuration_folder_button.setMaximumWidth(200)
+ show_configuration_folder_button.clicked.connect(self._showConfigurationFolder)
+
layout.addWidget(self._send_report_checkbox)
layout.addWidget(show_details_button)
+ layout.addWidget(show_configuration_folder_button)
# "backup and start clean" and "close" buttons
buttons = QDialogButtonBox()
@@ -182,6 +188,10 @@ class CrashHandler:
self.early_crash_dialog.close()
+ def _showConfigurationFolder(self):
+ path = Resources.getConfigStoragePath();
+ QDesktopServices.openUrl(QUrl.fromLocalFile( path ))
+
def _showDetailedReport(self):
self.dialog.exec_()
diff --git a/cura/CuraApplication.py b/cura/CuraApplication.py
index 07b3aab60c..90c7dbb75e 100755
--- a/cura/CuraApplication.py
+++ b/cura/CuraApplication.py
@@ -1547,8 +1547,16 @@ class CuraApplication(QtApplication):
for original_node in nodes:
# Create a CuraSceneNode just if the original node is not that type
- node = original_node if isinstance(original_node, CuraSceneNode) else CuraSceneNode()
- node.setMeshData(original_node.getMeshData())
+ if isinstance(original_node, CuraSceneNode):
+ node = original_node
+ else:
+ node = CuraSceneNode()
+ node.setMeshData(original_node.getMeshData())
+
+ #Setting meshdata does not apply scaling.
+ if(original_node.getScale() != Vector(1.0, 1.0, 1.0)):
+ node.scale(original_node.getScale())
+
node.setSelectable(True)
node.setName(os.path.basename(filename))
diff --git a/cura/Settings/CuraContainerRegistry.py b/cura/Settings/CuraContainerRegistry.py
index be5a10e293..540f0b3475 100644
--- a/cura/Settings/CuraContainerRegistry.py
+++ b/cura/Settings/CuraContainerRegistry.py
@@ -228,19 +228,12 @@ class CuraContainerRegistry(ContainerRegistry):
Logger.log("e", "Incorrect profile [%s]. Could not find global profile", file_name)
return { "status": "error",
"message": catalog.i18nc("@info:status Don't translate the XML tags or !", "This profile {0} contains incorrect data, could not import it.", file_name)}
-
- # In a profile we can have the quality_definition metadata, but if not, we get the definition
- profile_definition = global_profile.getMetaDataEntry("quality_definition")
- if not profile_definition:
- profile_definition = global_profile.getMetaDataEntry("definition")
-
- # The expected machine definition may be the quality_definition if defined or the current definition id
- expected_machine_definition = None
+ profile_definition = global_profile.getMetaDataEntry("definition")
+ expected_machine_definition = "fdmprinter"
if parseBool(global_container_stack.getMetaDataEntry("has_machine_quality", "False")):
expected_machine_definition = global_container_stack.getMetaDataEntry("quality_definition")
- if not expected_machine_definition:
- expected_machine_definition = global_container_stack.definition.getId()
-
+ if not expected_machine_definition:
+ expected_machine_definition = global_container_stack.definition.getId()
if expected_machine_definition is not None and profile_definition is not None and profile_definition != expected_machine_definition:
Logger.log("e", "Profile [%s] is for machine [%s] but the current active machine is [%s]. Will not import the profile", file_name, profile_definition, expected_machine_definition)
return { "status": "error",
diff --git a/cura/Settings/MaterialSettingsVisibilityHandler.py b/cura/Settings/MaterialSettingsVisibilityHandler.py
index 5b6050d2c0..530284991d 100644
--- a/cura/Settings/MaterialSettingsVisibilityHandler.py
+++ b/cura/Settings/MaterialSettingsVisibilityHandler.py
@@ -9,7 +9,7 @@ class MaterialSettingsVisibilityHandler(UM.Settings.Models.SettingVisibilityHand
material_settings = {
"default_material_print_temperature",
- "material_bed_temperature",
+ "default_material_bed_temperature",
"material_standby_temperature",
#"material_flow_temp_graph",
"cool_fan_speed",
diff --git a/plugins/CuraEngineBackend/CuraEngineBackend.py b/plugins/CuraEngineBackend/CuraEngineBackend.py
index 1c275d6d5b..79fa12114f 100755
--- a/plugins/CuraEngineBackend/CuraEngineBackend.py
+++ b/plugins/CuraEngineBackend/CuraEngineBackend.py
@@ -192,7 +192,7 @@ class CuraEngineBackend(QObject, Backend):
## Perform a slice of the scene.
def slice(self):
- Logger.log("d", "starting to slice!")
+ Logger.log("d", "Starting to slice...")
self._slice_start_time = time()
if not self._build_plates_to_be_sliced:
self.processingProgress.emit(1.0)
@@ -200,7 +200,7 @@ class CuraEngineBackend(QObject, Backend):
return
if self._process_layers_job:
- Logger.log("d", " ## Process layers job still busy, trying later")
+ Logger.log("d", "Process layers job still busy, trying later.")
return
if not hasattr(self._scene, "gcode_dict"):
diff --git a/plugins/GCodeWriter/GCodeWriter.py b/plugins/GCodeWriter/GCodeWriter.py
index 368942fd08..225800454f 100644
--- a/plugins/GCodeWriter/GCodeWriter.py
+++ b/plugins/GCodeWriter/GCodeWriter.py
@@ -121,9 +121,13 @@ class GCodeWriter(MeshWriter):
if flat_global_container.getMetaDataEntry("quality_type", None) is None:
flat_global_container.addMetaDataEntry("quality_type", stack.quality.getMetaDataEntry("quality_type", "normal"))
- # Ensure that quality_definition is set. (Can happen if we have empty quality changes).
+ # Change the default defintion
+ default_machine_definition = "fdmprinter"
if parseBool(stack.getMetaDataEntry("has_machine_quality", "False")):
- flat_global_container.addMetaDataEntry("quality_definition", stack.getMetaDataEntry("quality_definition"))
+ default_machine_definition = stack.getMetaDataEntry("quality_definition")
+ if not default_machine_definition:
+ default_machine_definition = stack.definition.getId()
+ flat_global_container.setMetaDataEntry("definition", default_machine_definition)
serialized = flat_global_container.serialize()
data = {"global_quality": serialized}
@@ -145,6 +149,10 @@ class GCodeWriter(MeshWriter):
# Ensure that quality_type is set. (Can happen if we have empty quality changes).
if flat_extruder_quality.getMetaDataEntry("quality_type", None) is None:
flat_extruder_quality.addMetaDataEntry("quality_type", extruder.quality.getMetaDataEntry("quality_type", "normal"))
+
+ # Change the default defintion
+ flat_extruder_quality.setMetaDataEntry("definition", default_machine_definition)
+
extruder_serialized = flat_extruder_quality.serialize()
data.setdefault("extruder_quality", []).append(extruder_serialized)
diff --git a/plugins/MonitorStage/MonitorStage.py b/plugins/MonitorStage/MonitorStage.py
index 1a999ca896..1a1d37cbdf 100644
--- a/plugins/MonitorStage/MonitorStage.py
+++ b/plugins/MonitorStage/MonitorStage.py
@@ -69,9 +69,11 @@ class MonitorStage(CuraStage):
self._printer_output_device.connectionStateChanged.connect(self._updateIconSource)
self._setActivePrinter(self._printer_output_device.activePrinter)
- # Force an update of the icon source
- self._updateIconSource()
+ # Force an update of the icon source
+ self._updateIconSource()
except IndexError:
+ #If index error occurs, then the icon on monitor button also should be updated
+ self._updateIconSource()
pass
def _onEngineCreated(self):
diff --git a/plugins/UM3NetworkPrinting/LegacyUM3OutputDevice.py b/plugins/UM3NetworkPrinting/LegacyUM3OutputDevice.py
index 647a7f822c..87d4b9ec0a 100644
--- a/plugins/UM3NetworkPrinting/LegacyUM3OutputDevice.py
+++ b/plugins/UM3NetworkPrinting/LegacyUM3OutputDevice.py
@@ -419,8 +419,6 @@ class LegacyUM3OutputDevice(NetworkedPrinterOutputDevice):
self._authentication_failed_message.show()
elif status_code == 200:
self.setAuthenticationState(AuthState.Authenticated)
- # Now we know for sure that we are authenticated, send the material profiles to the machine.
- self._sendMaterialProfiles()
def _checkAuthentication(self):
Logger.log("d", "Checking if authentication is correct for id %s and key %s", self._authentication_id, self._getSafeAuthKey())
diff --git a/resources/definitions/dagoma_discoeasy200.def.json b/resources/definitions/dagoma_discoeasy200.def.json
index 9bcc2402f2..1674801b5e 100644
--- a/resources/definitions/dagoma_discoeasy200.def.json
+++ b/resources/definitions/dagoma_discoeasy200.def.json
@@ -7,7 +7,6 @@
"author": "Dagoma",
"manufacturer": "Dagoma",
"file_formats": "text/x-gcode",
- "icon": "icon_discoeasy200.png",
"platform": "discoeasy200.stl",
"platform_offset": [ 105, -59, 280]
},
@@ -39,13 +38,25 @@
"default_value": 10
},
"machine_start_gcode": {
- "default_value": ";Gcode by Cura\nG90 ;absolute positioning\nM106 S250 ;fan on for the palpeur\nG28 X Y\nG1 X50\nM109 S180\nG28\nM104 S{material_print_temperature_layer_0}\n;Activation palpeur\n;bloc palpeur\nG29 ;Auto level\nM107 ;start with the fan off\nG1 X100 Y20 F3000\nG1 Z0.5\nM109 S{material_print_temperature_layer_0}\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Z3\nG1 F6000"
+ "default_value": ";Gcode by Cura\nG90\nM106 S250\nG28 X Y\nG1 X50\nM109 S180\nG28\nM104 S{material_print_temperature_layer_0}\nG29\nM107\nG1 X100 Y20 F3000\nG1 Z0.5\nM109 S{material_print_temperature_layer_0}\nM82\nG92 E0\nG1 F200 E10\nG92 E0\nG1 Z3\nG1 F6000\n"
},
"machine_end_gcode": {
- "default_value": "M104 S0\nM106 S255 ;start fan full power\nM140 S0 ;heated bed heater off (if you have it)\n;Home machine\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+3 F3000 ;move Z up a bit and retract filament even more\nG90\nG28 X Y\n;Ventilation forcee\nM107 ;stop fan\n;Shut down motor\nM84 ;shut down motors"
+ "default_value": "\nM104 S0\nM106 S255\nM140 S0\nG91\nG1 E-1 F300\nG1 Z+3 F3000\nG90\nG28 X Y\nM107\nM84\n"
},
"material_diameter": {
"default_value": 1.75
+ },
+ "speed_print": {
+ "default_value": 60
+ },
+ "speed_travel": {
+ "default_value": 100
+ },
+ "retraction_amount": {
+ "default_value": 3.5
+ },
+ "retraction_speed": {
+ "default_value": 50
}
}
}
diff --git a/resources/definitions/dagoma_neva.def.json b/resources/definitions/dagoma_neva.def.json
new file mode 100644
index 0000000000..430d2f6ab1
--- /dev/null
+++ b/resources/definitions/dagoma_neva.def.json
@@ -0,0 +1,69 @@
+{
+ "id": "Dagoma_neva",
+ "name": "Dagoma NEVA",
+ "version": 2,
+ "inherits": "fdmprinter",
+ "metadata": {
+ "visible": true,
+ "author": "Dagoma",
+ "manufacturer": "Dagoma",
+ "file_formats": "text/x-gcode",
+ "platform": "neva.stl",
+ "platform_offset": [ 0, 0, 0]
+ },
+ "overrides": {
+ "machine_width": {
+ "default_value": 195.55
+ },
+ "machine_height": {
+ "default_value": 205
+ },
+ "machine_depth": {
+ "default_value": 195.55
+ },
+ "machine_center_is_zero": {
+ "default_value": true
+ },
+ "machine_nozzle_size": {
+ "default_value": 0.4
+ },
+ "machine_head_with_fans_polygon": {
+ "default_value": [
+ [17, 40],
+ [17, -70],
+ [-17, -70],
+ [17, 40]
+ ]
+ },
+ "gantry_height": {
+ "default_value": 0
+ },
+ "machine_shape": {
+ "default_value": "elliptic"
+ },
+ "machine_gcode_flavor": {
+ "default_value": "RepRap"
+ },
+ "machine_start_gcode": {
+ "default_value": ";Gcode by Cura\nG90\nG28\nM109 S100\nG29\nM104 S{material_print_temperature_layer_0}\nG0 X0 Y-85\nG0 Z0.26\nM109 S{material_print_temperature_layer_0}\nM82\nG92 E0\nG1 F200 E6\nG92 E0\nG1 F200 E-3.5\nG0 Z0.15\nG0 X10\nG0 Z3\nG1 F6000\n"
+ },
+ "machine_end_gcode": {
+ "default_value": "\nM104 S0\nM106 S255\nM140 S0\nG91\nG1 E-1 F300\nG1 Z+3 E-2 F9000\nG90\nG28\n"
+ },
+ "material_diameter": {
+ "default_value": 1.75
+ },
+ "speed_print": {
+ "default_value": 40
+ },
+ "speed_travel": {
+ "default_value": 120
+ },
+ "retraction_amount": {
+ "default_value": 3.8
+ },
+ "retraction_speed": {
+ "default_value": 60
+ }
+ }
+}
diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json
index 80bb9b19b9..4b14500360 100644
--- a/resources/definitions/fdmprinter.def.json
+++ b/resources/definitions/fdmprinter.def.json
@@ -1527,8 +1527,10 @@
"label": "Connect Infill Lines",
"description": "Connect the ends where the infill pattern meets the inner wall using a line which follows the shape of the inner wall. Enabling this setting can make the infill adhere to the walls better and reduce the effects of infill on the quality of vertical surfaces. Disabling this setting reduces the amount of material used.",
"type": "bool",
- "default_value": true,
- "enabled": "infill_pattern == 'cross' or infill_pattern == 'cross_3d'",
+ "default_value": false,
+ "value": "infill_pattern == 'cross' or infill_pattern == 'cross_3d'",
+ "enabled": "infill_pattern == 'grid' or infill_pattern == 'triangles' or infill_pattern == 'trihexagon' or infill_pattern == 'cubic' or infill_pattern == 'tetrahedral' or infill_pattern == 'quarter_cubic' or infill_pattern == 'cross' or infill_pattern == 'cross_3d'",
+ "limit_to_extruder": "infill_extruder_nr",
"settable_per_mesh": true
},
"infill_angles":
@@ -3571,6 +3573,18 @@
"settable_per_mesh": false,
"settable_per_extruder": true
},
+ "zig_zaggify_support":
+ {
+ "label": "Connect Support Lines",
+ "description": "Connect the ends of the support lines together. Enabling this setting can make your support more sturdy and reduce underextrusion, but it will cost more material.",
+ "type": "bool",
+ "default_value": false,
+ "value": "support_pattern == 'cross'",
+ "enabled": "support_pattern == 'grid' or support_pattern == 'triangles' or support_pattern == 'cross'",
+ "limit_to_extruder": "support_infill_extruder_nr",
+ "settable_per_mesh": false,
+ "settable_per_extruder": true
+ },
"support_connect_zigzags":
{
"label": "Connect Support ZigZags",
diff --git a/resources/definitions/ubuild-3d_mr_bot_280.def.json b/resources/definitions/ubuild-3d_mr_bot_280.def.json
new file mode 100644
index 0000000000..7f9069370c
--- /dev/null
+++ b/resources/definitions/ubuild-3d_mr_bot_280.def.json
@@ -0,0 +1,49 @@
+{
+ "id": "ubuild-3d_mr_bot_280",
+ "version": 2,
+ "name": "uBuild-3D Mr Bot 280",
+ "inherits": "fdmprinter",
+ "metadata": {
+ "visible": true,
+ "author": "uBuild-3D",
+ "manufacturer": "uBuild-3D",
+ "category": "Other",
+ "file_formats": "text/x-gcode",
+ "icon": "icon_uBuild-3D",
+ "platform": "mr_bot_280_platform.stl",
+ "has_materials": true
+ },
+
+ "overrides": {
+ "machine_name": { "default_value": "Mr Bot 280" },
+ "machine_heated_bed": { "default_value": true },
+ "machine_width": { "default_value": 275 },
+ "machine_height": { "default_value": 275 },
+ "machine_depth": { "default_value": 275 },
+ "machine_center_is_zero": { "default_value": false },
+ "material_diameter": { "default_value": 1.75 },
+ "material_bed_temperature": { "default_value": 70 },
+ "machine_nozzle_size": { "default_value": 0.4 },
+ "layer_height": { "default_value": 0.2 },
+ "layer_height_0": { "default_value": 0.1 },
+ "retraction_amount": { "default_value": 2 },
+ "retraction_speed": { "default_value": 50 },
+ "retraction_retract_speed": { "default_value": 50 },
+ "retraction_prime_speed": { "default_value": 30 },
+ "adhesion_type": { "default_value": "skirt" },
+ "machine_nozzle_heat_up_speed": { "default_value": 2 },
+ "machine_nozzle_cool_down_speed": { "default_value": 2 },
+ "machine_head_with_fans_polygon": { "default_value": [[-20,20],[10,10],[10,10],[10,10]] },
+ "gantry_height": { "default_value": 275 },
+ "machine_max_feedrate_z": { "default_value": 15 },
+ "machine_max_feedrate_e": { "default_value": 60 },
+ "machine_max_acceleration_z": { "default_value": 1000 },
+ "machine_acceleration": { "default_value": 2000 },
+ "machine_max_jerk_xy": { "default_value": 20 },
+ "machine_max_jerk_z": { "default_value": 0.4 },
+ "machine_max_jerk_e": { "default_value": 5 },
+ "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
+ "machine_start_gcode": { "default_value": "G21 ; set units to millimeters\nG90 ; use absolute positioning\nM82 ; absolute extrusion mode\nM140 S{material_bed_temperature} ; set bed temp\nM104 S{material_print_temperature} ; set extruder temp\nG28 ; home X, Y and Z\nG29 ; probe sequence (for auto-leveling)\nG1 Z15 F600 ; go to Z15 position\nG1 X0 Y-20 F10000 ; go to X0 Y-20 position\nM190 S{material_bed_temperature} ; wait for bed temp\nM109 S{material_print_temperature} ; wait for extruder temp\nG92 E0 ; reset extruder distance position\nG1 E25 F100 ; extrude 25mm of material\nG92 E0 ; reset extruder distance position\nM117 Printing..." },
+ "machine_end_gcode": { "default_value": "M400 ; wait for moves to finish\nG92 Z0 E0 ; reset Z position\nG1 E-2 F9000 ; retract material\nG1 Z2 ; get extruder out of the way\nM104 S0 ; turn off extruder\nG1 Y285 F3000 ; present finished print\nM140 S0 ; turn off bed\nM84 ; disable motors\nM117 Print complete" }
+ }
+}
diff --git a/resources/i18n/cura.pot b/resources/i18n/cura.pot
index e8148997ce..1620e11d81 100644
--- a/resources/i18n/cura.pot
+++ b/resources/i18n/cura.pot
@@ -3598,6 +3598,11 @@ msgctxt "@label"
msgid "SVG icons"
msgstr ""
+#: /home/ruben/Projects/Cura/resources/qml/AboutDialog.qml:139
+msgctxt "@label"
+msgid "Linux cross-distribution application deployment"
+msgstr ""
+
#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:41
msgctxt "@label"
msgid "Profile:"
diff --git a/resources/i18n/de_DE/cura.po b/resources/i18n/de_DE/cura.po
index 9af48a4d06..250e3e5e1b 100644
--- a/resources/i18n/de_DE/cura.po
+++ b/resources/i18n/de_DE/cura.po
@@ -3485,6 +3485,11 @@ msgctxt "@label"
msgid "SVG icons"
msgstr "SVG-Symbole"
+#: /home/ruben/Projects/Cura/resources/qml/AboutDialog.qml:139
+msgctxt "@label"
+msgid "Linux cross-distribution application deployment"
+msgstr "Distributionsunabhängiges Format für Linux-Anwendungen"
+
#: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:41
msgctxt "@label"
msgid "Profile:"
diff --git a/resources/meshes/neva.stl b/resources/meshes/neva.stl
new file mode 100644
index 0000000000..72ec185bd9
Binary files /dev/null and b/resources/meshes/neva.stl differ
diff --git a/resources/qml/AboutDialog.qml b/resources/qml/AboutDialog.qml
index 30e540e80a..5d3b1d1544 100644
--- a/resources/qml/AboutDialog.qml
+++ b/resources/qml/AboutDialog.qml
@@ -136,6 +136,7 @@ UM.Dialog
projectsModel.append({ name:"Noto Sans", description: catalog.i18nc("@label", "Font"), license: "Apache 2.0", url: "https://www.google.com/get/noto/" });
projectsModel.append({ name:"Font-Awesome-SVG-PNG", description: catalog.i18nc("@label", "SVG icons"), license: "SIL OFL 1.1", url: "https://github.com/encharm/Font-Awesome-SVG-PNG" });
+ projectsModel.append({ name:"AppImageKit", description: catalog.i18nc("@label", "Linux cross-distribution application deployment"), license: "MIT", url: "https://github.com/AppImage/AppImageKit" });
}
}
}
diff --git a/resources/qml/Cura.qml b/resources/qml/Cura.qml
index f474d93900..799797f9f9 100644
--- a/resources/qml/Cura.qml
+++ b/resources/qml/Cura.qml
@@ -518,6 +518,9 @@ UM.MainWindow
insertPage(4, catalog.i18nc("@title:tab", "Profiles"), Qt.resolvedUrl("Preferences/ProfilesPage.qml"));
+ // Remove plug-ins page because we will use the shiny new plugin browser:
+ removePage(5);
+
//Force refresh
setPage(0);
}
@@ -629,17 +632,6 @@ UM.MainWindow
}
}
- // show the installed plugins page in the preferences dialog
- Connections
- {
- target: Cura.Actions.configurePlugins
- onTriggered:
- {
- preferences.visible = true
- preferences.setPage(5)
- }
- }
-
UM.ExtensionModel {
id: curaExtensions
}
diff --git a/resources/themes/cura-light/theme.json b/resources/themes/cura-light/theme.json
index b7ab0000de..8c8e6d1c47 100644
--- a/resources/themes/cura-light/theme.json
+++ b/resources/themes/cura-light/theme.json
@@ -6,48 +6,53 @@
"fonts": {
"large": {
"size": 1.35,
- "bold": true,
+ "weight": 63,
"family": "Noto Sans"
},
"large_nonbold": {
"size": 1.35,
+ "weight": 50,
"family": "Noto Sans"
},
"default": {
"size": 1.0,
+ "weight": 50,
"family": "Noto Sans"
},
"default_bold": {
"size": 1.0,
- "bold": true,
+ "weight": 63,
"family": "Noto Sans"
},
"default_italic": {
"size": 1.15,
+ "weight": 50,
"italic": true,
"family": "Noto Sans"
},
"small": {
"size": 1.0,
- "bold": true,
+ "weight": 63,
"family": "Noto Sans"
},
"very_small": {
"size": 1.0,
+ "weight": 50,
"family": "Noto Sans"
},
"button_tooltip": {
"size": 1.0,
+ "weight": 50,
"family": "Noto Sans"
},
"setting_category": {
"size": 1.15,
- "bold": true,
+ "weight": 63,
"family": "Noto Sans"
},
"action_button": {
"size": 1.15,
- "bold": true,
+ "weight": 50,
"family": "Noto Sans"
}
},
diff --git a/setup.py b/setup.py
index a91ba535d5..0d78f44ddc 100644
--- a/setup.py
+++ b/setup.py
@@ -51,24 +51,24 @@ setup(name="Cura",
#console=[{"script": "cura_app.py"}],
options={"py2exe": {"skip_archive": False, "includes": includes}})
-print("Coping Cura plugins.")
+print("Copying Cura plugins.")
shutil.copytree(os.path.dirname(UM.__file__) + "/../plugins", "dist/plugins", ignore = shutil.ignore_patterns("ConsoleLogger", "OBJWriter", "MLPWriter", "MLPReader"))
for path in os.listdir("plugins"):
copytree("plugins/" + path, "dist/plugins/" + path)
-print("Coping resources.")
+print("Copying resources.")
copytree(os.path.dirname(UM.__file__) + "/../resources", "dist/resources")
copytree("resources", "dist/resources")
-print("Coping Uranium QML.")
+print("Copying Uranium QML.")
shutil.copytree(os.path.dirname(UM.__file__) + "/Qt/qml/UM", "dist/qml/UM")
for site_package in site.getsitepackages():
qt_origin_path = os.path.join(site_package, "PyQt5")
if os.path.isdir(qt_origin_path):
- print("Coping PyQt5 plugins from: %s" % qt_origin_path)
+ print("Copying PyQt5 plugins from: %s" % qt_origin_path)
shutil.copytree(os.path.join(qt_origin_path, "plugins"), "dist/PyQt5/plugins")
- print("Coping PyQt5 QtQuick from: %s" % qt_origin_path)
+ print("Copying PyQt5 QtQuick from: %s" % qt_origin_path)
shutil.copytree(os.path.join(qt_origin_path, "qml/QtQuick"), "dist/qml/QtQuick")
shutil.copytree(os.path.join(qt_origin_path, "qml/QtQuick.2"), "dist/qml/QtQuick.2")
- print("Coping PyQt5 svg library from: %s" % qt_origin_path)
+ print("Copying PyQt5 svg library from: %s" % qt_origin_path)
shutil.copy(os.path.join(qt_origin_path, "Qt5Svg.dll"), "dist/Qt5Svg.dll")
print("Copying Angle libraries from %s" % qt_origin_path)
shutil.copy(os.path.join(qt_origin_path, "libEGL.dll"), "dist/libEGL.dll")