diff --git a/plugins/MakerbotWriter/MakerbotWriter.py b/plugins/MakerbotWriter/MakerbotWriter.py
index f35b53a84d..e4c2d2cbd1 100644
--- a/plugins/MakerbotWriter/MakerbotWriter.py
+++ b/plugins/MakerbotWriter/MakerbotWriter.py
@@ -258,11 +258,87 @@ class MakerbotWriter(MeshWriter):
 
         meta["preferences"] = dict()
         bounds = application.getBuildVolume().getBoundingBox()
+        intent = CuraApplication.getInstance().getIntentManager().currentIntentCategory
         meta["preferences"]["instance0"] = {
             "machineBounds": [bounds.right, bounds.front, bounds.left, bounds.back] if bounds is not None else None,
-            "printMode": CuraApplication.getInstance().getIntentManager().currentIntentCategory,
+            "printMode": intent
         }
 
+        if file_format == "application/x-makerbot":
+            accel_overrides = meta["accel_overrides"] = {}
+            if intent in ['highspeed', 'highspeedsolid']:
+                accel_overrides['do_input_shaping'] = True
+                accel_overrides['do_corner_rounding'] = True
+            bead_mode_overrides = accel_overrides["bead_mode"] = {}
+
+            accel_enabled = global_stack.getProperty('acceleration_enabled', 'value')
+
+            if accel_enabled:
+                global_accel_setting = global_stack.getProperty('acceleration_print', 'value')
+                accel_overrides["rate_mm_per_s_sq"] = {
+                    "x": global_accel_setting,
+                    "y": global_accel_setting
+                }
+
+                if global_stack.getProperty('acceleration_travel_enabled', 'value'):
+                    travel_accel_setting = global_stack.getProperty('acceleration_travel', 'value')
+                    bead_mode_overrides['Travel Move'] = {
+                        "rate_mm_per_s_sq": {
+                            "x": travel_accel_setting,
+                            "y": travel_accel_setting
+                        }
+                    }
+
+            jerk_enabled = global_stack.getProperty('jerk_enabled', 'value')
+            if jerk_enabled:
+                global_jerk_setting = global_stack.getProperty('jerk_print', 'value')
+                accel_overrides["max_speed_change_mm_per_s"] = {
+                    "x": global_jerk_setting,
+                    "y": global_jerk_setting
+                }
+
+                if global_stack.getProperty('jerk_travel_enabled', 'value'):
+                    travel_jerk_setting = global_stack.getProperty('jerk_travel', 'value')
+                    if 'Travel Move' not in bead_mode_overrides:
+                        bead_mode_overrides['Travel Move' ] = {}
+                    bead_mode_overrides['Travel Move'].update({
+                        "max_speed_change_mm_per_s": {
+                            "x": travel_jerk_setting,
+                            "y": travel_jerk_setting
+                        }
+                    })
+
+
+            # Get bead mode settings per extruder
+            available_bead_modes = {
+                "infill": "FILL",
+                "prime_tower": "PRIME_TOWER",
+                "roofing": "TOP_SURFACE",
+                "support_infill": "SUPPORT",
+                "support_interface": "SUPPORT_INTERFACE",
+                "wall_0": "WALL_OUTER",
+                "wall_x": "WALL_INNER",
+                "skirt_brim": "SKIRT"
+            }
+            for idx, extruder in enumerate(extruders):
+                for bead_mode_setting, bead_mode_tag in available_bead_modes.items():
+                    ext_specific_tag = "%s_%s" % (bead_mode_tag, idx)
+                    if accel_enabled or jerk_enabled:
+                        bead_mode_overrides[ext_specific_tag] = {}
+
+                    if accel_enabled:
+                        accel_val = extruder.getProperty('acceleration_%s' % bead_mode_setting, 'value')
+                        bead_mode_overrides[ext_specific_tag]["rate_mm_per_s_sq"] = {
+                            "x": accel_val,
+                            "y": accel_val
+                        }
+                    if jerk_enabled:
+                        jerk_val = extruder.getProperty('jerk_%s' % bead_mode_setting, 'value')
+                        bead_mode_overrides[ext_specific_tag][ "max_speed_change_mm_per_s"] = {
+                            "x": jerk_val,
+                            "y": jerk_val
+                        }
+
         meta["miracle_config"] = {"gaggles": {"instance0": {}}}
 
         version_info = dict()
diff --git a/resources/definitions/ultimaker_method_base.def.json b/resources/definitions/ultimaker_method_base.def.json
index 14d3a08818..e421b20529 100644
--- a/resources/definitions/ultimaker_method_base.def.json
+++ b/resources/definitions/ultimaker_method_base.def.json
@@ -33,12 +33,15 @@
     {
         "acceleration_enabled":
         {
-            "enabled": false,
+            "enabled": true,
             "value": true
         },
         "acceleration_infill":
         {
             "enabled": false,
+            "maximum_value": 3500,
+            "minimum_value": 200,
+            "minimum_value_warning": 750,
             "value": "acceleration_print"
         },
         "acceleration_layer_0":
@@ -49,11 +52,17 @@
         "acceleration_prime_tower":
         {
             "enabled": false,
+            "maximum_value": 3500,
+            "minimum_value": 200,
+            "minimum_value_warning": 750,
             "value": "acceleration_print"
         },
         "acceleration_print":
         {
             "enabled": false,
+            "maximum_value": 3500,
+            "minimum_value": 200,
+            "minimum_value_warning": 750,
             "value": 800
         },
         "acceleration_print_layer_0":
@@ -64,32 +73,52 @@
         "acceleration_roofing":
         {
             "enabled": false,
+            "maximum_value": 3500,
+            "minimum_value": 200,
+            "minimum_value_warning": 750,
             "value": "acceleration_print"
         },
+        "acceleration_skirt_brim":
+        {
+            "enabled": false,
+            "maximum_value": 3500,
+            "minimum_value": 200,
+            "minimum_value_warning": 750,
+            "value": 800
+        },
         "acceleration_support":
         {
             "enabled": false,
+            "maximum_value": 3500,
+            "minimum_value": 200,
+            "minimum_value_warning": 750,
             "value": "acceleration_print"
         },
         "acceleration_support_bottom":
         {
             "enabled": false,
-            "value": "acceleration_print"
+            "value": "acceleration_support_interface"
         },
         "acceleration_support_infill":
         {
             "enabled": false,
-            "value": "acceleration_print"
+            "maximum_value": 3500,
+            "minimum_value": 200,
+            "minimum_value_warning": 750,
+            "value": "acceleration_support"
         },
         "acceleration_support_interface":
         {
             "enabled": false,
-            "value": "acceleration_print"
+            "maximum_value": 3500,
+            "minimum_value": 200,
+            "minimum_value_warning": 750,
+            "value": "acceleration_support"
         },
         "acceleration_support_roof":
         {
             "enabled": false,
-            "value": "acceleration_print"
+            "value": "acceleration_support_interface"
         },
         "acceleration_topbottom":
         {
@@ -99,6 +128,9 @@
         "acceleration_travel":
         {
             "enabled": false,
+            "maximum_value": 5000,
+            "minimum_value": 200,
+            "minimum_value_warning": 750,
             "value": 5000
         },
         "acceleration_travel_enabled":
@@ -114,27 +146,36 @@
         "acceleration_wall":
         {
             "enabled": false,
+            "maximum_value": 3500,
+            "minimum_value": 200,
+            "minimum_value_warning": 750,
             "value": "acceleration_print"
         },
         "acceleration_wall_0":
         {
             "enabled": false,
-            "value": "acceleration_print"
+            "maximum_value": 3500,
+            "minimum_value": 200,
+            "minimum_value_warning": 750,
+            "value": "acceleration_wall"
         },
         "acceleration_wall_0_roofing":
         {
             "enabled": false,
-            "value": "acceleration_print"
+            "value": "acceleration_wall"
         },
         "acceleration_wall_x":
         {
             "enabled": false,
-            "value": "acceleration_print"
+            "maximum_value": 3500,
+            "minimum_value": 200,
+            "minimum_value_warning": 750,
+            "value": "acceleration_wall"
         },
         "acceleration_wall_x_roofing":
         {
             "enabled": false,
-            "value": "acceleration_print"
+            "value": "acceleration_wall"
         },
         "adhesion_extruder_nr":
         {
@@ -203,12 +244,15 @@
         "inset_direction": { "value": "'inside_out'" },
         "jerk_enabled":
         {
-            "enabled": false,
+            "enabled": true,
             "value": true
         },
         "jerk_infill":
         {
-            "enabled": false,
+            "enabled": "jerk_enabled",
+            "maximum_value": 35,
+            "minimum_value": 5,
+            "minimum_value_warning": 12,
             "value": "jerk_print"
         },
         "jerk_layer_0":
@@ -218,13 +262,19 @@
         },
         "jerk_prime_tower":
         {
-            "enabled": false,
+            "enabled": "jerk_enabled and prime_tower_enable and extruders_enabled_count > 1",
+            "maximum_value": 35,
+            "minimum_value": 5,
+            "minimum_value_warning": 12,
             "value": "jerk_print"
         },
         "jerk_print":
         {
-            "enabled": false,
-            "value": 6.25
+            "enabled": "jerk_enabled",
+            "maximum_value": 35,
+            "minimum_value": 5,
+            "minimum_value_warning": 12,
+            "value": 12.5
         },
         "jerk_print_layer_0":
         {
@@ -233,33 +283,50 @@
         },
         "jerk_roofing":
         {
-            "enabled": false,
+            "enabled": "jerk_enabled",
+            "maximum_value": 35,
+            "minimum_value": 5,
+            "minimum_value_warning": 12,
             "value": "jerk_print"
         },
+        "jerk_skirt_brim":
+        {
+            "enabled": "jerk_enabled and (adhesion_type == 'brim' or adhesion_type == 'skirt')",
+            "value": 12.5
+        },
         "jerk_support":
         {
-            "enabled": false,
+            "enabled": "jerk_enabled and support_enable",
+            "maximum_value": 35,
+            "minimum_value": 5,
+            "minimum_value_warning": 12,
             "value": "jerk_print"
         },
         "jerk_support_bottom":
         {
             "enabled": false,
-            "value": "jerk_print"
+            "value": "jerk_support_interface"
         },
         "jerk_support_infill":
         {
-            "enabled": false,
-            "value": "jerk_print"
+            "enabled": "jerk_enabled and support_enable",
+            "maximum_value": 35,
+            "minimum_value": 5,
+            "minimum_value_warning": 12,
+            "value": "jerk_support"
         },
         "jerk_support_interface":
         {
-            "enabled": false,
-            "value": "jerk_print"
+            "enabled": "jerk_enabled and support_enable",
+            "maximum_value": 35,
+            "minimum_value": 5,
+            "minimum_value_warning": 12,
+            "value": "jerk_support"
         },
         "jerk_support_roof":
         {
             "enabled": false,
-            "value": "jerk_print"
+            "value": "jerk_support_interface"
         },
         "jerk_topbottom":
         {
@@ -268,8 +335,11 @@
         },
         "jerk_travel":
         {
-            "enabled": false,
-            "value": "jerk_print"
+            "enabled": "jerk_enabled",
+            "maximum_value": 35,
+            "minimum_value": 5,
+            "minimum_value_warning": 12,
+            "value": 12.5
         },
         "jerk_travel_enabled":
         {
@@ -283,12 +353,18 @@
         },
         "jerk_wall":
         {
-            "enabled": false,
+            "enabled": "jerk_enabled",
+            "maximum_value": 35,
+            "minimum_value": 5,
+            "minimum_value_warning": 12,
             "value": "jerk_print"
         },
         "jerk_wall_0":
         {
-            "enabled": false,
+            "enabled": "jerk_enabled",
+            "maximum_value": 35,
+            "minimum_value": 5,
+            "minimum_value_warning": 12,
             "value": "jerk_print"
         },
         "jerk_wall_0_roofing":
@@ -298,7 +374,10 @@
         },
         "jerk_wall_x":
         {
-            "enabled": false,
+            "enabled": "jerk_enabled",
+            "maximum_value": 35,
+            "minimum_value": 5,
+            "minimum_value_warning": 12,
             "value": "jerk_print"
         },
         "jerk_wall_x_roofing":
@@ -517,16 +596,86 @@
         "skirt_height": { "value": 3 },
         "small_skin_width": { "value": 4 },
         "speed_equalize_flow_width_factor": { "value": 0 },
-        "speed_prime_tower": { "value": "speed_topbottom" },
-        "speed_print": { "value": 50 },
-        "speed_roofing": { "value": "speed_wall_0" },
-        "speed_support": { "value": "speed_wall" },
-        "speed_support_interface": { "value": "speed_topbottom" },
-        "speed_topbottom": { "value": "speed_wall" },
+        "speed_infill":
+        {
+            "maximum_value": 350,
+            "maximum_value_warning": 325
+        },
+        "speed_prime_tower":
+        {
+            "maximum_value": 250,
+            "maximum_value_warning": 200,
+            "value": "speed_topbottom"
+        },
+        "speed_print":
+        {
+            "maximum_value": 350,
+            "maximum_value_warning": 325,
+            "value": 50
+        },
+        "speed_roofing":
+        {
+            "maximum_value": 300,
+            "maximum_value_warning": 275,
+            "value": "speed_wall_0"
+        },
+        "speed_support":
+        {
+            "maximum_value": 350,
+            "maximum_value_warning": 325,
+            "value": "speed_wall"
+        },
+        "speed_support_infill":
+        {
+            "maximum_value": 350,
+            "maximum_value_warning": 325
+        },
+        "speed_support_interface":
+        {
+            "maximum_value": 260,
+            "maximum_value_warning": 255,
+            "value": "speed_topbottom"
+        },
+        "speed_support_roof":
+        {
+            "maximum_value": 260,
+            "maximum_value_warning": 255
+        },
+        "speed_topbottom":
+        {
+            "maximum_value": 260,
+            "maximum_value_warning": 255,
+            "value": "speed_wall"
+        },
         "speed_travel": { "value": 250 },
-        "speed_wall": { "value": "speed_print * 40/50" },
-        "speed_wall_0": { "value": "speed_wall * 30/40" },
-        "speed_wall_x": { "value": "speed_wall" },
+        "speed_wall":
+        {
+            "maximum_value": 260,
+            "maximum_value_warning": 255,
+            "value": "speed_print * 40/50"
+        },
+        "speed_wall_0":
+        {
+            "maximum_value": 260,
+            "maximum_value_warning": 255,
+            "value": "speed_wall * 30/40"
+        },
+        "speed_wall_0_roofing":
+        {
+            "maximum_value": 260,
+            "maximum_value_warning": 255
+        },
+        "speed_wall_x":
+        {
+            "maximum_value": 260,
+            "maximum_value_warning": 255,
+            "value": "speed_wall"
+        },
+        "speed_wall_x_roofing":
+        {
+            "maximum_value": 260,
+            "maximum_value_warning": 255
+        },
         "support_angle": { "value": 40 },
         "support_bottom_height": { "value": "2*support_infill_sparse_thickness" },
         "support_bottom_line_width":
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..f5a00d9db1
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..2e098b3a0b
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..0db1a5b803
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1XA
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..b6ff6e1ebd
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1XA
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..4b42af13fa
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..69a50a831b
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..0328525090
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..0c2bb88cc7
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..a82ddaa428
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1XA
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..9aebcb531b
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1XA
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..11aa6d2878
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..ea8caef493
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+