From 9dbb7fcc1568cb39b60103fd85c3718dc44f00e9 Mon Sep 17 00:00:00 2001
From: probonopd <probonopd@users.noreply.github.com>
Date: Tue, 14 Mar 2017 18:31:58 +0100
Subject: [PATCH] Update as per discussion in
 https://github.com/Ultimaker/Cura/pull/1350

---
 resources/definitions/renkforce_rf100.def.json | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/resources/definitions/renkforce_rf100.def.json b/resources/definitions/renkforce_rf100.def.json
index bdbc44ea8c..ebbe56ec8e 100644
--- a/resources/definitions/renkforce_rf100.def.json
+++ b/resources/definitions/renkforce_rf100.def.json
@@ -58,7 +58,7 @@
             "value": "100"
         },
         "machine_end_gcode": {
-            "default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
+            "default_value": ";End GCode\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 E-5 X-20 Y-20 ;retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG0 Z{machine_height} ;move the platform all the way down\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nM84 ;steppers off\nG90 ;absolute positioning\nM117 Done"
         },
         "machine_gcode_flavor": {
             "default_value": "RepRap (Marlin/Sprinter)"
@@ -70,7 +70,7 @@
             "default_value": "Renkforce RF100"
         },
         "machine_start_gcode": {
-            "default_value": ";Sliced at: {day} {date} {time}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM117 Printing..."
+            "default_value": ";Start GCode\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\n;Put printing message on LCD screen\nM117 Printing..."
         },
         "machine_width": {
             "value": "100"