Create tinyboy.def.json

save

update

update

update

update

fix

Update tinyboy_e16.def.json

fix

fix

resources/definitions/tinyboy.def.json

@@ -1,6 +1,6 @@
 {
-    "name": "TinyBoy",
     "version": 2,
+    "name": "TinyBoy",
     "inherits": "fdmprinter",
     "metadata": {
         "author": "Fred Chan",
@@ -11,10 +11,6 @@
 		"has_materials": false,
         "has_machine_quality": true,
         "preferred_quality_type": "normal",		
-		"machine_extruder_trains":
-        {
-            "0": "tinyboy_e10_extruder_0"
-        }
     },
 	
     "overrides": {
@@ -29,68 +25,27 @@
                 [30, 34]
             ]
         },
-        "layer_height_0": {
+        "machine_center_is_zero": { "default_value": false },
-            "default_value": 0.2
+        "layer_height": { "default_value": 0.1 },
-        },
+        "layer_height_0": { "default_value": 0.15 },
-        "top_bottom_thickness": {
+        "retraction_amount": { "default_value": 0.8 },
-            "default_value": 0.9
+        "retraction_speed": { "default_value": 35 },
-        },
+        "adhesion_type": { "default_value": "skirt" },
-        "top_bottom_pattern_0": {
+        "machine_head_with_fans_polygon": { "default_value": [[-31,31],[34,31],[34,-40],[-31,-40]] },
-            "default_value": "concentric"
+        "gantry_height": { "value": "28" },
-        },
+        "machine_max_feedrate_z": { "default_value": 12 },
-        "infill_pattern": {
+        "machine_max_feedrate_e": { "default_value": 120 },
-            "value": "'triangles'"
+        "machine_max_acceleration_z": { "default_value": 500 },
-        },
+        "machine_acceleration": { "default_value": 1000 },
-        "retraction_enable": {
+        "machine_max_jerk_xy": { "default_value": 10 },
-            "default_value": true
+        "machine_max_jerk_z": { "default_value": 0.2 },
-        },
+        "machine_max_jerk_e": { "default_value": 2.5 },
-        "retraction_amount": {
+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
-            "default_value": 6
+        "machine_start_gcode": {
-        },
+            "default_value": "G21 ; set units to millimeters\nG90 ; use absolute positioning\nM82 ; absolute extrusion mode\nM104 S{material_print_temperature_layer_0} ; set extruder temp\nM140 S{material_bed_temperature_layer_0} ; set bed temp\nM190 S{material_bed_temperature_layer_0} ; wait for bed temp\nM109 S{material_print_temperature_layer_0} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG92 E0.0 ; reset extruder distance position\nG1 Y-3.0 F1000.0 ; go outside print area\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E21.5 F1000.0 ; intro line\nG92 E0.0 ; reset extruder distance position"
-        "retraction_speed": {
-            "default_value": 20
-        },
-        "cool_min_layer_time": {
-            "default_value": 10
-        },
-        "adhesion_type": {
-            "default_value": "skirt"
-        },
-        "skirt_line_count": {
-            "default_value": 4
-        },
-        "skirt_gap": {
-            "default_value": 5
         },
         "machine_end_gcode": {
             "default_value": "M104 S0 ; turn off extruder\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y210; home X axis and push Y forward\nM84 ; disable motors"
-        },
-		"machine_center_is_zero": {
-			"default_value": false
-		},
-        "machine_heated_bed": {
-            "default_value": false
-        },
-        "gantry_height": {
-            "default_value": 30
-        },
-        "acceleration_enabled": {
-            "default_value": true
-        },
-        "acceleration_print": {
-            "default_value": 500
-        },
-        "acceleration_travel": {
-            "default_value": 500
-        },
-        "jerk_enabled": {
-            "default_value": true
-        },
-        "jerk_print": {
-            "default_value": 20
-        },
-        "jerk_travel": {
-            "default_value": 20
         }
     }
 }

resources/definitions/tinyboy_e10.def.json

@@ -1,20 +1,23 @@
 {
     "version": 2,
     "name": "TinyBoy E10_J10_L10_M10",
-    "inherits": "tinyboy",
+    "inherits": "fdmprinter",
-    "metadata": { "visible": true },
+    "metadata": { 
+		"visible": true,
+        "author": "Fred Chan",
+        "manufacturer": "TinyBoy / mago",
+        "category": "tinyboy",		
+		"machine_extruder_trains":
+        {
+            "0": "tinyboy_extruder_0"
+        }
+	},
 	
     "overrides": {	
         "machine_name": { "default_value": "TinyBoy E10" },
-        "machine_width": {
+        "machine_width": { "default_value": 100 },
-            "default_value": 100
+        "machine_depth": { "default_value": 100 },
-        },
+        "machine_height": { "default_value": 105 },
-        "machine_depth": {
-            "default_value": 100
-        },
-        "machine_height": {
-            "default_value": 105
-        },
         "machine_start_gcode": {
             "default_value": "G28 ;Home\nG1 Z15.0 F2000 ;Move the platform"
         },

resources/definitions/tinyboy_e16.def.json

@@ -1,8 +1,17 @@
 {
     "version": 2,
     "name": "TinyBoy E16_L16_M16",
-    "inherits": "tinyboy",
+    "inherits": "fdmprinter",
-    "metadata": { "visible": true },
+    "metadata": { 
+		"visible": true,
+        "author": "Fred Chan",
+        "manufacturer": "TinyBoy / mago",
+        "category": "tinyboy",				
+		"machine_extruder_trains":
+        {
+            "0": "tinyboy_extruder_0"
+        }
+	},
 	
     "overrides": {	
         "machine_name": { "default_value": "TinyBoy E16" },
@@ -17,4 +26,3 @@
         }
     }
 }
-

resources/definitions/tinyboy_mago.def.json

@@ -1,8 +1,17 @@
 {
     "version": 2,
     "name": "mago 3d printer",
-    "inherits": "tinyboy",
+    "inherits": "fdmprinter",
-    "metadata": { "visible": true },
+    "metadata": { 
+		"visible": true,
+        "author": "Fred Chan",
+        "manufacturer": "TinyBoy / mago",
+        "category": "tinyboy",				
+		"machine_extruder_trains":
+        {
+            "0": "tinyboy_extruder_0"
+        }
+	},
 	
     "overrides": {	
         "machine_name": { "default_value": "mago 3d printer" },

resources/definitions/tinyboy_ra20.def.json

@@ -1,12 +1,19 @@
 {
     "version": 2,
     "name": "TinyBoy RA20",
-    "inherits": "tinyboy",
+    "inherits": "fdmprinter",
     "metadata": { 
         "visible": true,
+        "author": "Fred Chan",
+        "manufacturer": "TinyBoy / mago",
+        "category": "tinyboy",				
         "platform": "tinyboy_ra20.obj",
 		"platform_texture": "tinyboy2.png",		
-		"platform_offset": [ 8, -70, -8 ]
+		"platform_offset": [ 8, -70, -8 ],
+		"machine_extruder_trains":
+        {
+            "0": "tinyboy_extruder_0"
+        }
     },
 
     "overrides": {