From c75a2941be3142027d3929bcaaa178db3ca75457 Mon Sep 17 00:00:00 2001
From: MaukCC <jos@mauk.cc>
Date: Fri, 21 Apr 2017 10:07:25 +0200
Subject: [PATCH] Add files via upload

---
 .../cartesio_0.4_arnitel2045_high.inst.cfg    | 63 +++++++++++++++++++
 .../cartesio_0.4_arnitel2045_normal.inst.cfg  | 63 +++++++++++++++++++
 2 files changed, 126 insertions(+)
 create mode 100644 resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_high.inst.cfg
 create mode 100644 resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_normal.inst.cfg

diff --git a/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_high.inst.cfg b/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_high.inst.cfg
new file mode 100644
index 0000000000..954d6fd5d2
--- /dev/null
+++ b/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_high.inst.cfg
@@ -0,0 +1,63 @@
+[general]
+version = 2
+name = High Quality
+definition = cartesio
+
+[metadata]
+type = quality
+quality_type = high
+material = dsm_arnitel2045_cartesio_0.4_mm
+weight = 1
+
+[values]
+infill_line_width = 0.5
+
+wall_thickness = 1.2
+top_bottom_thickness = 0.8
+wall_0_inset = -0.05
+fill_perimeter_gaps = nowhere
+travel_compensate_overlapping_walls_enabled =
+
+infill_sparse_density = 40
+infill_pattern = grid
+
+material_print_temperature_layer_0 = =material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+material_diameter = 1.75
+retraction_min_travel = =round(line_width * 10)
+retraction_prime_speed = 2
+switch_extruder_retraction_amount = 2
+switch_extruder_retraction_speeds = =retraction_speed
+switch_extruder_prime_speed = =retraction_prime_speed
+
+speed_print = 25
+speed_infill = =speed_print
+speed_layer_0 = =round(speed_print / 5 * 4)
+speed_wall = =round(speed_print / 2)
+speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_topbottom = =round(speed_print / 5 * 4)
+speed_slowdown_layers = 1
+speed_travel = =round(speed_print if magic_spiralize else 150)
+speed_travel_layer_0 = =speed_travel
+speed_support_interface = =speed_topbottom
+speed_equalize_flow_enabled = True
+speed_equalize_flow_max = =speed_print
+
+acceleration_enabled = True
+acceleration_print = 100
+acceleration_travel = 300
+jerk_print = 5
+
+retraction_hop_enabled = True
+retraction_hop = 1
+
+cool_min_layer_time_fan_speed_max = =cool_min_layer_time
+cool_min_layer_time = 20
+
+skirt_brim_minimal_length = 50
+
+coasting_enable = True
+coasting_volume = 0.1
+coasting_min_volume = 0.17
+coasting_speed = 90
diff --git a/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_normal.inst.cfg b/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_normal.inst.cfg
new file mode 100644
index 0000000000..fdf4e354fc
--- /dev/null
+++ b/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_normal.inst.cfg
@@ -0,0 +1,63 @@
+[general]
+version = 2
+name = Normal Quality
+definition = cartesio
+
+[metadata]
+type = quality
+quality_type = normal
+material = dsm_arnitel2045_cartesio_0.4_mm
+weight = 2
+
+[values]
+infill_line_width = 0.5
+
+wall_thickness = 1.2
+top_bottom_thickness = 0.8
+wall_0_inset = -0.05
+fill_perimeter_gaps = nowhere
+travel_compensate_overlapping_walls_enabled =
+
+infill_sparse_density = 40
+infill_pattern = grid
+
+material_print_temperature_layer_0 = =material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+material_diameter = 1.75
+retraction_min_travel = =round(line_width * 10)
+retraction_prime_speed = 2
+switch_extruder_retraction_amount = 2
+switch_extruder_retraction_speeds = =retraction_speed
+switch_extruder_prime_speed = =retraction_prime_speed
+
+speed_print = 25
+speed_infill = =speed_print
+speed_layer_0 = =round(speed_print / 5 * 4)
+speed_wall = =round(speed_print / 2)
+speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_topbottom = =round(speed_print / 5 * 4)
+speed_slowdown_layers = 1
+speed_travel = =round(speed_print if magic_spiralize else 150)
+speed_travel_layer_0 = =speed_travel
+speed_support_interface = =speed_topbottom
+speed_equalize_flow_enabled = True
+speed_equalize_flow_max = =speed_print
+
+acceleration_enabled = True
+acceleration_print = 100
+acceleration_travel = 300
+jerk_print = 5
+
+retraction_hop_enabled = True
+retraction_hop = 1
+
+cool_min_layer_time_fan_speed_max = =cool_min_layer_time
+cool_min_layer_time = 20
+
+skirt_brim_minimal_length = 50
+
+coasting_enable = True
+coasting_volume = 0.1
+coasting_min_volume = 0.17
+coasting_speed = 90