diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg index 53bb10c2eb..e4af6a3846 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg @@ -40,9 +40,7 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_travel = 250 speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) -support_bottom_distance = =support_z_distance support_interface_density = 87.5 -support_interface_pattern = lines switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg index 544dd606cc..3677d0f830 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg @@ -27,13 +27,7 @@ speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) top_bottom_thickness = 1 support_brim_enable = True -support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) -support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric' support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_angle = 45 -support_join_distance = 5 -support_offset = 2 -support_pattern = triangles -support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10 diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg index 03888d299d..9824109303 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg @@ -26,13 +26,7 @@ speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) top_bottom_thickness = 1 support_brim_enable = True -support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) -support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric' support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_angle = 45 -support_join_distance = 5 -support_offset = 2 -support_pattern = triangles -support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10 diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg index 38f4253ab8..0363362b5f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg @@ -23,14 +23,8 @@ prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 70) support_brim_enable = True -support_interface_enable = True support_interface_density = =min(extruderValues('material_surface_energy')) -support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric' support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_angle = 45 -support_join_distance = 5 -support_offset = 2 -support_pattern = triangles -support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10 top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg index 0c1224aa2b..fd195c841d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg @@ -51,7 +51,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) support_bottom_distance = =support_z_distance support_interface_density = 87.5 -support_interface_pattern = lines switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index 1bce358b5d..cada630bb9 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -49,7 +49,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) support_bottom_distance = =support_z_distance support_interface_density = 87.5 -support_interface_pattern = lines switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index b997f3acff..1e7f439fac 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -51,7 +51,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) support_bottom_distance = =support_z_distance support_interface_density = 87.5 -support_interface_pattern = lines switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg index d6181b9207..2e7057947e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg @@ -48,7 +48,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) support_bottom_distance = =support_z_distance support_interface_density = 87.5 -support_interface_pattern = lines switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg index d4f447b5e3..b90e50c955 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -26,7 +26,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg index 47fae5de3f..cd6fa26ba8 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -27,7 +27,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg index d8dd16b398..7e0fdd459a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg @@ -31,6 +31,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_pattern = ='triangles' -support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index c2236f4e28..228358c8a0 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -34,6 +34,4 @@ speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_infill = =math.ceil(speed_print * 35 / 45) support_angle = 70 -support_pattern = ='triangles' -support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg index dbf45cd04f..df8a7a4d29 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -32,6 +32,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_pattern = ='triangles' -support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index 6510c0db81..0ae86ae243 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -34,7 +34,6 @@ retraction_prime_speed = 15 speed_travel = 300 speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index d37c9aef29..8112cd6fb0 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -35,7 +35,6 @@ speed_travel = 300 speed_wall_x = =math.ceil(speed_wall * 30 / 30) speed_infill = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index 2313d3e7f2..76ad9235ba 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -34,7 +34,6 @@ retraction_prime_speed = 15 speed_travel = 300 speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg index 91cd4ac90c..569a214004 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -27,5 +27,4 @@ prime_tower_enable = False retract_at_layer_change = False speed_print = 45 support_angle = 70 -support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg index 24838340d2..85442a1a0e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -32,5 +32,4 @@ speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall = =math.ceil(speed_print * 25/ 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) support_angle = 70 -support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg index 2a650e69bd..ffc82adfb2 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -32,6 +32,4 @@ speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_wall = =math.ceil(speed_print * 25/ 35) speed_wall_0 = =math.ceil(speed_print * 20 / 35) support_angle = 70 -support_pattern = ='triangles' -support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index e68fde0763..b1c73cd9cb 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -43,7 +43,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index c0c9e7c48a..2585eb3ebf 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -45,7 +45,6 @@ speed_wall_x = =speed_print speed_infill = =speed_print support_angle = 50 support_bottom_distance = =support_z_distance -support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index e85db940a5..c020e5a80a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -43,7 +43,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg index 3e2c92bbf6..7682054c76 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg @@ -18,4 +18,3 @@ material_standby_temperature = 100 retraction_count_max = 5 support_brim_enable = True support_infill_sparse_thickness = 0.3 -support_interface_height = 1.2