diff --git a/resources/variants/ultimaker2_plus_0.25.cfg b/resources/variants/ultimaker2_plus_0.25.cfg
new file mode 100644
index 0000000000..18839a8871
--- /dev/null
+++ b/resources/variants/ultimaker2_plus_0.25.cfg
@@ -0,0 +1,16 @@
+[general]
+name = 0.25 mm
+version = 2
+definition = ultimaker2_plus
+
+[metadata]
+author = Ultimaker
+
+[values]
+machine_nozzle_size = 0.25
+machine_nozzle_tip_outer_diameter = 0.8
+coasting_volume = 0.1
+coasting_min_volume = 0.17
+speed_wall = round(speed_print / 1.2, 1)
+speed_wall_0 = 1 if speed_wall < 5 else (speed_wall - 5)
+speed_topbottom = round(speed_print / 1.5, 1)
\ No newline at end of file
diff --git a/resources/variants/ultimaker2_plus_0.4.cfg b/resources/variants/ultimaker2_plus_0.4.cfg
new file mode 100644
index 0000000000..b7dc47ea6e
--- /dev/null
+++ b/resources/variants/ultimaker2_plus_0.4.cfg
@@ -0,0 +1,14 @@
+[general]
+name = 0.4 mm
+version = 2
+definition = ultimaker2_plus
+
+[metadata]
+author = Ultimaker
+
+[values]
+machine_nozzle_size = 0.4
+machine_nozzle_tip_outer_diameter = 1.05
+speed_wall = round(speed_print / 1.25, 1)
+speed_wall_0 = 1 if speed_wall < 10 else (speed_wall - 10)
+speed_topbottom = round(speed_print / 2.25, 1)
\ No newline at end of file
diff --git a/resources/variants/ultimaker2_plus_0.6.cfg b/resources/variants/ultimaker2_plus_0.6.cfg
new file mode 100644
index 0000000000..d6a7da7437
--- /dev/null
+++ b/resources/variants/ultimaker2_plus_0.6.cfg
@@ -0,0 +1,15 @@
+[general]
+name = 0.6 mm
+version = 2
+definition = ultimaker2_plus
+
+[metadata]
+author = Ultimaker
+
+[values]
+machine_nozzle_size = 0.6
+machine_nozzle_tip_outer_diameter = 1.25
+coasting_volume = 1.36
+speed_wall = round(speed_print * 4 / 3, 1)
+speed_wall_0 = 1 if speed_wall < 10 else (speed_wall - 10)
+speed_topbottom = round(speed_print / 2, 1)
\ No newline at end of file
diff --git a/resources/variants/ultimaker2_plus_0.8.cfg b/resources/variants/ultimaker2_plus_0.8.cfg
new file mode 100644
index 0000000000..cb97151642
--- /dev/null
+++ b/resources/variants/ultimaker2_plus_0.8.cfg
@@ -0,0 +1,15 @@
+[general]
+name = 0.8 mm
+version = 2
+definition = ultimaker2_plus
+
+[metadata]
+author = Ultimaker
+
+[values]
+machine_nozzle_size = 0.8
+machine_nozzle_tip_outer_diameter = 1.35
+coasting_volume = 3.22
+speed_wall = round(speed_print * 4 / 3, 1)
+speed_wall_0 = 1 if speed_wall < 10 else (speed_wall - 10)
+speed_topbottom = round(speed_print / 2, 1)
\ No newline at end of file