Add 0.8mm TPU profiles

They have already been optimised together with ABS, CPE, PLA, Nylon and PVA.

Contributes to issue CURA-3650.

resources/quality/ultimaker3/um3_aa0.8_TPU_Normal_Print.inst.cfg

@@ -0,0 +1,62 @@
+[general]
+version = 2
+name = Draft Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = draft
+material = generic_tpu_ultimaker3_AA_0.8
+weight = -2
+
+[values]
+brim_width = 8.75
+cool_min_layer_time_fan_speed_max = 6
+expand_skins_expand_distance = =line_width * 2
+expand_skins_into_infill = True
+expand_upper_skins = True
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 5
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+infill_pattern = tetrahedral
+infill_sparse_density = 80
+jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
+jerk_support = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+material_bed_temperature_layer_0 = 0
+material_flow = 105
+material_print_temperature = =default_material_print_temperature - 2
+material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_standby_temperature = 100
+multiple_mesh_overlap = 0.2
+prime_tower_enable = True
+prime_tower_flow = 100
+prime_tower_wall_thickness = =prime_tower_line_width * 2
+retract_at_layer_change = False
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.5
+retraction_hop = 0.5
+retraction_hop_only_when_collides = False
+retraction_min_travel = 0.8
+retraction_prime_speed = 15
+skin_line_width = =round(line_width * 0.78 / 0.8, 2)
+skin_overlap = 15
+speed_print = 30
+speed_topbottom = =math.ceil(speed_print * 25 / 30)
+speed_travel = 300
+speed_wall = =math.ceil(speed_print * 30 / 30)
+speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+support_angle = 50
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.7 / 0.8, 2)
+support_offset = =line_width
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 45
+top_bottom_thickness = 1.2
+travel_compensate_overlapping_walls_0_enabled = False
+wall_0_wipe_dist = =line_width * 2
+wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
+wall_thickness = 1.3
+

resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg

@@ -0,0 +1,63 @@
+[general]
+version = 2
+name = Superdraft Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = superdraft
+material = generic_tpu_ultimaker3_AA_0.8
+weight = -4
+
+[values]
+brim_width = 8.75
+cool_min_layer_time_fan_speed_max = 6
+expand_skins_expand_distance = =line_width * 2
+expand_skins_into_infill = True
+expand_upper_skins = True
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 5
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+infill_pattern = tetrahedral
+infill_sparse_density = 80
+jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
+jerk_support = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+layer_height = 0.4
+material_bed_temperature_layer_0 = 0
+material_flow = 105
+material_print_temperature = =default_material_print_temperature + 2
+material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_standby_temperature = 100
+multiple_mesh_overlap = 0.2
+prime_tower_enable = True
+prime_tower_flow = 100
+prime_tower_wall_thickness = =prime_tower_line_width * 2
+retract_at_layer_change = False
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.5
+retraction_hop = 0.5
+retraction_hop_only_when_collides = False
+retraction_min_travel = 0.8
+retraction_prime_speed = 15
+skin_line_width = =round(line_width * 0.78 / 0.8, 2)
+skin_overlap = 15
+speed_print = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 30)
+speed_travel = 300
+speed_wall = =math.ceil(speed_print * 30 / 30)
+speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+support_angle = 50
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.7 / 0.8, 2)
+support_offset = =line_width
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 45
+top_bottom_thickness = 1.2
+travel_compensate_overlapping_walls_0_enabled = False
+wall_0_wipe_dist = =line_width * 2
+wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
+wall_thickness = 1.3
+

resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg

@@ -0,0 +1,62 @@
+[general]
+version = 2
+name = Verydraft Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = verydraft
+material = generic_tpu_ultimaker3_AA_0.8
+weight = -3
+
+[values]
+brim_width = 8.75
+cool_min_layer_time_fan_speed_max = 6
+expand_skins_expand_distance = =line_width * 2
+expand_skins_into_infill = True
+expand_upper_skins = True
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 5
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+infill_pattern = tetrahedral
+infill_sparse_density = 80
+jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
+jerk_support = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+layer_height = 0.3
+material_bed_temperature_layer_0 = 0
+material_flow = 105
+material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_standby_temperature = 100
+multiple_mesh_overlap = 0.2
+prime_tower_enable = True
+prime_tower_flow = 100
+prime_tower_wall_thickness = =prime_tower_line_width * 2
+retract_at_layer_change = False
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.5
+retraction_hop = 0.5
+retraction_hop_only_when_collides = False
+retraction_min_travel = 0.8
+retraction_prime_speed = 15
+skin_line_width = =round(line_width * 0.78 / 0.8, 2)
+skin_overlap = 15
+speed_print = 30
+speed_topbottom = =math.ceil(speed_print * 23 / 30)
+speed_travel = 300
+speed_wall = =math.ceil(speed_print * 30 / 30)
+speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+support_angle = 50
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.7 / 0.8, 2)
+support_offset = =line_width
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 45
+top_bottom_thickness = 1.2
+travel_compensate_overlapping_walls_0_enabled = False
+wall_0_wipe_dist = =line_width * 2
+wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
+wall_thickness = 1.3
+