From cc693a88048d98445d732f78d2e2a486da6963e6 Mon Sep 17 00:00:00 2001
From: KOUBeMT <51325289+KOUBeMT@users.noreply.github.com>
Date: Wed, 5 Jun 2019 15:04:18 +0200
Subject: [PATCH] First_Strateo3D_commit

---
 resources/definitions/strateo3d.def.json      | 136 ++++++++++++++++++
 .../strateo3d_left_extruder.def.json          |  17 +++
 .../strateo3d_right_extruder.def.json         |  17 +++
 .../Standard_0.4/s3d_std0.4_ABS_A.inst.cfg    |  48 +++++++
 .../Standard_0.4/s3d_std0.4_ABS_B.inst.cfg    |  48 +++++++
 .../Standard_0.4/s3d_std0.4_ABS_C.inst.cfg    |  48 +++++++
 .../Standard_0.4/s3d_std0.4_PETG_A.inst.cfg   |  48 +++++++
 .../Standard_0.4/s3d_std0.4_PETG_B.inst.cfg   |  48 +++++++
 .../Standard_0.4/s3d_std0.4_PETG_C.inst.cfg   |  48 +++++++
 .../Standard_0.4/s3d_std0.4_PLA_A.inst.cfg    |  48 +++++++
 .../Standard_0.4/s3d_std0.4_PLA_B.inst.cfg    |  48 +++++++
 .../Standard_0.4/s3d_std0.4_PLA_C.inst.cfg    |  48 +++++++
 .../Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg  |  49 +++++++
 .../Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg  |  49 +++++++
 .../Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg  |  49 +++++++
 .../s3d_std0.4_PVA-OKS_A.inst.cfg             |  49 +++++++
 .../s3d_std0.4_PVA-OKS_B.inst.cfg             |  49 +++++++
 .../s3d_std0.4_PVA-OKS_C.inst.cfg             |  49 +++++++
 .../Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg  |  49 +++++++
 .../Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg  |  49 +++++++
 .../Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg  |  49 +++++++
 .../Standard_0.4/s3d_std0.4_TPU98A_A.inst.cfg |  48 +++++++
 .../Standard_0.4/s3d_std0.4_TPU98A_B.inst.cfg |  48 +++++++
 .../Standard_0.4/s3d_std0.4_TPU98A_C.inst.cfg |  48 +++++++
 .../Standard_0.6/s3d_std0.6_ABS_B.inst.cfg    |  48 +++++++
 .../Standard_0.6/s3d_std0.6_ABS_C.inst.cfg    |  48 +++++++
 .../Standard_0.6/s3d_std0.6_ABS_D.inst.cfg    |  48 +++++++
 .../Standard_0.6/s3d_std0.6_ASA-X_B.inst.cfg  |  48 +++++++
 .../Standard_0.6/s3d_std0.6_ASA-X_C.inst.cfg  |  48 +++++++
 .../Standard_0.6/s3d_std0.6_ASA-X_D.inst.cfg  |  48 +++++++
 .../s3d_std0.6_Nylon-1030_C.inst.cfg          |  48 +++++++
 .../Standard_0.6/s3d_std0.6_PETG_B.inst.cfg   |  48 +++++++
 .../Standard_0.6/s3d_std0.6_PETG_C.inst.cfg   |  48 +++++++
 .../Standard_0.6/s3d_std0.6_PETG_D.inst.cfg   |  48 +++++++
 .../Standard_0.6/s3d_std0.6_PLA_B.inst.cfg    |  48 +++++++
 .../Standard_0.6/s3d_std0.6_PLA_C.inst.cfg    |  48 +++++++
 .../Standard_0.6/s3d_std0.6_PLA_D.inst.cfg    |  48 +++++++
 .../Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg  |  49 +++++++
 .../Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg  |  49 +++++++
 .../Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg  |  49 +++++++
 .../s3d_std0.6_PVA-OKS_B.inst.cfg             |  49 +++++++
 .../s3d_std0.6_PVA-OKS_C.inst.cfg             |  49 +++++++
 .../s3d_std0.6_PVA-OKS_D.inst.cfg             |  49 +++++++
 .../Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg  |  49 +++++++
 .../Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg  |  49 +++++++
 .../Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg  |  49 +++++++
 .../Standard_0.6/s3d_std0.6_TPU98A_B.inst.cfg |  49 +++++++
 .../Standard_0.6/s3d_std0.6_TPU98A_C.inst.cfg |  49 +++++++
 .../Standard_0.6/s3d_std0.6_TPU98A_D.inst.cfg |  48 +++++++
 .../Standard_0.8/s3d_std0.8_ABS_C.inst.cfg    |  48 +++++++
 .../Standard_0.8/s3d_std0.8_ABS_D.inst.cfg    |  48 +++++++
 .../Standard_0.8/s3d_std0.8_ABS_E.inst.cfg    |  48 +++++++
 .../Standard_0.8/s3d_std0.8_PETG_C.inst.cfg   |  48 +++++++
 .../Standard_0.8/s3d_std0.8_PETG_D.inst.cfg   |  48 +++++++
 .../Standard_0.8/s3d_std0.8_PETG_E.inst.cfg   |  48 +++++++
 .../Standard_0.8/s3d_std0.8_PLA_C.inst.cfg    |  48 +++++++
 .../Standard_0.8/s3d_std0.8_PLA_D.inst.cfg    |  48 +++++++
 .../Standard_0.8/s3d_std0.8_PLA_E.inst.cfg    |  48 +++++++
 .../s3d_std0.8_PVA-OKS_C.inst.cfg             |  49 +++++++
 .../s3d_std0.8_PVA-OKS_D.inst.cfg             |  49 +++++++
 .../s3d_std0.8_PVA-OKS_E.inst.cfg             |  49 +++++++
 .../Standard_0.8/s3d_std0.8_TPU_C.inst.cfg    |  48 +++++++
 .../Standard_0.8/s3d_std0.8_TPU_D.inst.cfg    |  48 +++++++
 .../Standard_0.8/s3d_std0.8_TPU_E.inst.cfg    |  48 +++++++
 .../Standard_1.2/s3d_std1.2_PLA_H.inst.cfg    |  48 +++++++
 .../quality/strateo3d/s3d_global_A.inst.cfg   |  14 ++
 .../quality/strateo3d/s3d_global_B.inst.cfg   |  14 ++
 .../quality/strateo3d/s3d_global_C.inst.cfg   |  14 ++
 .../quality/strateo3d/s3d_global_D.inst.cfg   |  14 ++
 .../quality/strateo3d/s3d_global_E.inst.cfg   |  14 ++
 .../quality/strateo3d/s3d_global_F.inst.cfg   |  14 ++
 .../quality/strateo3d/s3d_global_G.inst.cfg   |  14 ++
 .../quality/strateo3d/s3d_global_H.inst.cfg   |  14 ++
 .../variants/strateo3d_standard_04.inst.cfg   |  21 +++
 .../variants/strateo3d_standard_06.inst.cfg   |  21 +++
 75 files changed, 3323 insertions(+)
 create mode 100644 resources/definitions/strateo3d.def.json
 create mode 100644 resources/extruders/strateo3d_left_extruder.def.json
 create mode 100644 resources/extruders/strateo3d_right_extruder.def.json
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_A.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_B.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_A.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_B.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_B.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_D.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_Nylon-1030_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_B.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_D.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_B.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_D.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_B.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_D.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_D.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_E.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_D.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_E.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_D.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_E.inst.cfg
 create mode 100644 resources/quality/strateo3d/Standard_1.2/s3d_std1.2_PLA_H.inst.cfg
 create mode 100644 resources/quality/strateo3d/s3d_global_A.inst.cfg
 create mode 100644 resources/quality/strateo3d/s3d_global_B.inst.cfg
 create mode 100644 resources/quality/strateo3d/s3d_global_C.inst.cfg
 create mode 100644 resources/quality/strateo3d/s3d_global_D.inst.cfg
 create mode 100644 resources/quality/strateo3d/s3d_global_E.inst.cfg
 create mode 100644 resources/quality/strateo3d/s3d_global_F.inst.cfg
 create mode 100644 resources/quality/strateo3d/s3d_global_G.inst.cfg
 create mode 100644 resources/quality/strateo3d/s3d_global_H.inst.cfg
 create mode 100644 resources/variants/strateo3d_standard_04.inst.cfg
 create mode 100644 resources/variants/strateo3d_standard_06.inst.cfg

diff --git a/resources/definitions/strateo3d.def.json b/resources/definitions/strateo3d.def.json
new file mode 100644
index 0000000000..46c193569d
--- /dev/null
+++ b/resources/definitions/strateo3d.def.json
@@ -0,0 +1,136 @@
+{
+	"version": 2,
+    "name": "Strateo3D",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "author": "M.K",
+        "manufacturer": "eMotionTech",
+        "category": "Other",
+        "visible": true,
+		"file_formats": "text/x-gcode",
+        "has_machine_quality": true,
+        "has_materials": true,
+        "has_machine_materials": true,
+        "has_variants": true,
+		"preferred_variant_name": "Standard 0.6",
+        "preferred_quality_type": "e",
+        "variants_name": "Print Head",
+        "machine_extruder_trains":
+        {
+            "0": "strateo3d_right_extruder",
+            "1": "strateo3d_left_extruder"
+        }
+
+    },
+
+   "overrides": {
+        "machine_name": { "default_value": "Strateo3D" },
+		"machine_width": { "default_value": 600 },
+        "machine_depth": { "default_value": 420 },
+        "machine_height": { "default_value": 495 },
+        "machine_heated_bed": { "default_value": true },
+		"machine_center_is_zero": { "default_value": false },
+		"machine_head_with_fans_polygon": { "default_value": [ [ -76, -51.8 ] , [ 25, -51.8 ] , [ 25, 38.2 ] , [ -76, 38.2 ] ] },
+		"gantry_height": { "default_value": 40 },
+		"machine_extruder_count": { "default_value": 2 },
+		"machine_gcode_flavor": { "default_value": "Marlin" },
+		"machine_start_gcode": { "default_value": "G28 \nG90 G1 X300 Y210 Z15 F6000 \nG92 E0" },
+        "machine_end_gcode": { "default_value": "T1 \nM104 S0 \nT0 \nM104 S0 \nM140 S0 \nM141 S0 \nG91 \nG0 E-1 F1500 \nG0 z1 \nG90 \nG28 \nM801.2 \nM801.0 \nM84" },
+		"extruder_prime_pos_y": {"minimum_value": "0", "maximum_value": "machine_depth"},
+        "extruder_prime_pos_x": {"minimum_value": "0", "maximum_value": "machine_width"}, 
+		"machine_heat_zone_length": { "default_value": 7 },
+		"default_material_print_temperature": { "maximum_value_warning": "350" },
+		"material_print_temperature": { "maximum_value_warning": "350" },  
+		"material_print_temperature_layer_0": { "maximum_value_warning": "350" },
+		"material_bed_temperature": { "maximum_value": "130" },
+        "material_bed_temperature_layer_0": { "maximum_value": "130" },
+        "extruder_prime_pos_abs": { "default_value": true },
+		"machine_acceleration": { "default_value": 2000 },
+
+		"acceleration_enabled": { "value": false },
+        "acceleration_layer_0": { "value": "acceleration_topbottom" },
+        "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 1000 / 2000)" },
+        "acceleration_print": { "value": "2000" },
+        "acceleration_support": { "value": "acceleration_print" },
+        "acceleration_support_interface": { "value": "acceleration_topbottom" },
+        "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 1000 / 2000)" },
+        "acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 2000)" },
+        "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1500)" },
+		"adaptive_layer_height_variation": { "default_value": 0.1 },
+        "adaptive_layer_height_variation_step": { "default_value": 0.05 },
+		"adhesion_type": { "default_value": "skirt" },
+		"expand_skins_expand_distance": { "value": "wall_line_width_0 + wall_line_count * wall_line_width_x" },
+		"gradual_infill_step_height": { "value": "layer_height*10" },
+		"gradual_support_infill_step_height": { "value": "layer_height*7" },
+		"infill_before_walls": { "default_value": false },
+		"infill_overlap": { "value": "0" },
+		"infill_wipe_dist": { "value": "0" },
+		"jerk_enabled": { "value": "False" },
+        "jerk_layer_0": { "value": "jerk_topbottom" },
+        "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" },
+        "jerk_print": { "value": "25" },
+        "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" },
+        "jerk_support_interface": { "value": "jerk_topbottom" },
+        "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" },
+        "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" },
+        "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" },
+		"layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
+        "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
+		"machine_min_cool_heat_time_window": { "value": "15" },
+		"machine_nozzle_cool_down_speed": { "default_value": 0.50 },
+		"machine_nozzle_heat_up_speed": { "default_value": 2.25 },
+		"material_final_print_temperature": { "value": "material_print_temperature - 10" },
+		"material_flow": { "default_value": 93 },
+		"material_flow_layer_0": { "value": "math.ceil(material_flow*1)" },
+		"material_initial_print_temperature": { "value": "material_print_temperature - 5" },
+		"meshfix_maximum_resolution": { "value": "0.03" },
+		"optimize_wall_printing_order": { "value": "True" },
+		"prime_blob_enable": { "enabled": false, "default_value": false },
+		"prime_tower_min_volume": { "default_value": 35 },
+		"prime_tower_position_x": { "value": "machine_width/2 - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" },
+        "prime_tower_position_y": { "value": "machine_depth - prime_tower_size - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - 1" },
+		"retraction_amount": { "default_value": 1.5 },
+		"retraction_combing": { "default_value": "all" },
+		"retraction_combing_max_distance": { "default_value": 5 },
+		"retraction_count_max": { "default_value": 15 },
+		"retraction_hop": { "value": "2" },
+        "retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },
+        "retraction_hop_only_when_collides": { "value": "True" },
+        "retraction_min_travel": { "value": "3*line_width" },
+        "retraction_prime_speed": { "value": "retraction_speed-10" },
+		"retraction_speed": { "default_value": 25 }, 
+		"skin_overlap": { "value": "10" },
+		"skirt_brim_minimal_length": { "default_value": 333 },
+		"speed_layer_0": { "value": "20" },
+		"speed_travel_layer_0": { "value": "100" },
+        "speed_prime_tower": { "value": "speed_topbottom" },
+        "speed_print": { "value": "50" },
+        "speed_support": { "value": "speed_wall" },
+        "speed_support_interface": { "value": "speed_topbottom" },
+        "speed_topbottom": { "value": "math.ceil(speed_print * 20/35)" },
+        "speed_travel": { "value": "150" },
+        "speed_wall": { "value": "math.ceil(speed_print * 3/4)" },
+        "speed_wall_0": { "value": "math.ceil(speed_wall * 2/3)" },
+        "speed_wall_x": { "value": "speed_wall" },
+		"support_angle": { "value": "50" },
+		"support_bottom_distance": {"value": "extruderValue(support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr, 'support_z_distance/2') if support_type == 'everywhere' else 0", "maximum_value_warning": "machine_nozzle_size*1.5" },
+		"support_interface_enable": { "default_value": true },
+		"support_interface_height": { "value": "layer_height*3" },
+		"support_interface_offset": { "value": "support_offset" },
+		"support_top_distance": {"value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance')", "maximum_value_warning": "machine_nozzle_size*1.5" },
+		"support_use_towers": { "default_value": true },
+		"support_xy_distance": { "value": "line_width * 1.7" },
+		"support_xy_distance_overhang": { "value": "wall_line_width_0" },
+		"support_z_distance": { "value": "layer_height*2", "maximum_value_warning": "machine_nozzle_size*1.5" },
+		"switch_extruder_prime_speed": { "value": "retraction_prime_speed" },
+		"switch_extruder_retraction_amount": { "value": "7" },
+		"switch_extruder_retraction_speeds": {"value": "retraction_retract_speed"},
+		"top_bottom_thickness": { "value": "3*layer_height", "minimum_value_warning": "layer_height*2" },
+		"top_thickness": { "value": "top_bottom_thickness" },
+		"top_layers": { "value": "0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))"},
+		"bottom_thickness": { "value": "top_bottom_thickness-2*layer_height+layer_height_0" },
+		"bottom_layers": { "value": "999999 if infill_sparse_density == 100 else math.ceil(round(((bottom_thickness-resolveOrValue('layer_height_0')) / resolveOrValue('layer_height'))+1, 4))"},
+		"travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
+		"wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" }
+    }
+}
\ No newline at end of file
diff --git a/resources/extruders/strateo3d_left_extruder.def.json b/resources/extruders/strateo3d_left_extruder.def.json
new file mode 100644
index 0000000000..2d6221ff22
--- /dev/null
+++ b/resources/extruders/strateo3d_left_extruder.def.json
@@ -0,0 +1,17 @@
+{
+    "id": "strateo3d_left_extruder",
+    "version": 2,
+    "name": "Left Extruder",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "strateo3d",
+        "position": "1"
+    },
+
+    "overrides": {
+        "extruder_nr": { "default_value": 1, "maximum_value": "1" },
+		"material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_offset_x": { "default_value": 0 },
+        "machine_nozzle_offset_y": { "default_value": 0 }
+    }
+}
diff --git a/resources/extruders/strateo3d_right_extruder.def.json b/resources/extruders/strateo3d_right_extruder.def.json
new file mode 100644
index 0000000000..d64a562a34
--- /dev/null
+++ b/resources/extruders/strateo3d_right_extruder.def.json
@@ -0,0 +1,17 @@
+{
+    "id": "strateo3d_right_extruder",
+    "version": 2,
+    "name": "Right Extruder",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "strateo3d",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": { "default_value": 0, "maximum_value": "1" },
+		"material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_offset_x": { "default_value": 0 },
+        "machine_nozzle_offset_y": { "default_value": 0 }
+    }
+}
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg
new file mode 100644
index 0000000000..80021c8f83
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_A.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = a
+weight = 1
+material = generic_abs
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.5
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 55
+speed_wall = =math.ceil(speed_print * 40/55)
+speed_wall_0 = =math.ceil(speed_wall * 25/40)
+speed_topbottom = =math.ceil(speed_print * 35/55)
+speed_layer_0 = =math.ceil(speed_print * 20/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 65
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg
new file mode 100644
index 0000000000..9f298125f4
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_B.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = b
+weight = 0
+material = generic_abs
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.5
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 60
+speed_wall = =math.ceil(speed_print * 43/60)
+speed_wall_0 = =math.ceil(speed_wall * 27/43)
+speed_topbottom = =math.ceil(speed_print * 37/60)
+speed_layer_0 = =math.ceil(speed_print * 25/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg
new file mode 100644
index 0000000000..37b9352ace
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_ABS_C.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = -1
+material = generic_abs
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.5
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 65
+speed_wall = =math.ceil(speed_print * 45/65)
+speed_wall_0 = =math.ceil(speed_wall * 30/45)
+speed_topbottom = =math.ceil(speed_print * 40/65)
+speed_layer_0 = =math.ceil(speed_print * 30/65)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature +5
+material_flow = 97
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_A.inst.cfg
new file mode 100644
index 0000000000..5380a4850f
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_A.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = a
+weight = 1
+material = generic_petg
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 55
+speed_wall = =math.ceil(speed_print * 40/55)
+speed_wall_0 = =math.ceil(speed_wall * 25/40)
+speed_topbottom = =math.ceil(speed_print * 35/55)
+speed_layer_0 = =math.ceil(speed_print * 20/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 65
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 91
+retraction_extra_prime_amount = 0
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_B.inst.cfg
new file mode 100644
index 0000000000..86dfb3ef46
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_B.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = b
+weight = 0
+material = generic_petg
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 60
+speed_wall = =math.ceil(speed_print * 43/60)
+speed_wall_0 = =math.ceil(speed_wall * 27/43)
+speed_topbottom = =math.ceil(speed_print * 37/60)
+speed_layer_0 = =math.ceil(speed_print * 25/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 91
+retraction_extra_prime_amount = 0
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_C.inst.cfg
new file mode 100644
index 0000000000..b3ed16bb75
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PETG_C.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = -1
+material = generic_petg
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 65
+speed_wall = =math.ceil(speed_print * 45/65)
+speed_wall_0 = =math.ceil(speed_wall * 30/45)
+speed_topbottom = =math.ceil(speed_print * 40/65)
+speed_layer_0 = =math.ceil(speed_print * 30/65)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature +5
+material_flow = 91
+retraction_extra_prime_amount = 0
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg
new file mode 100644
index 0000000000..aaaa5f4142
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_A.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = a
+weight = 1
+material = generic_pla
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.43
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 55
+speed_wall = =math.ceil(speed_print * 40/55)
+speed_wall_0 = =math.ceil(speed_wall * 25/40)
+speed_topbottom = =math.ceil(speed_print * 35/55)
+speed_layer_0 = =math.ceil(speed_print * 20/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 10
+support_angle = 65
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg
new file mode 100644
index 0000000000..363fd45113
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_B.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = b
+weight = 0
+material = generic_pla
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.43
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 60
+speed_wall = =math.ceil(speed_print * 43/60)
+speed_wall_0 = =math.ceil(speed_wall * 27/43)
+speed_topbottom = =math.ceil(speed_print * 37/60)
+speed_layer_0 = =math.ceil(speed_print * 25/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg
new file mode 100644
index 0000000000..16ddf51744
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_C.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = -1
+material = generic_pla
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.43
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 65
+speed_wall = =math.ceil(speed_print * 45/65)
+speed_wall_0 = =math.ceil(speed_wall * 30/45)
+speed_topbottom = =math.ceil(speed_print * 40/65)
+speed_layer_0 = =math.ceil(speed_print * 30/65)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature +5
+material_print_temperature_layer_0 = =default_material_print_temperature +3
+material_flow = 97
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg
new file mode 100644
index 0000000000..5a7f160aff
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_A.inst.cfg
@@ -0,0 +1,49 @@
+ [general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_pva-m
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 65
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width*3/4
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg
new file mode 100644
index 0000000000..87a0a94109
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_B.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_pva-m
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width*3/4
+support_xy_distance_overhang = ==line_width*0.175/line_width
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg
new file mode 100644
index 0000000000..0137fa4570
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-M_C.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_pva-m
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width*3/4
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg
new file mode 100644
index 0000000000..4a25700f16
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_A.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_pva-oks
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 65
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width*3/4
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg
new file mode 100644
index 0000000000..7ec05e2205
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_B.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_pva-oks
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width*3/4
+support_xy_distance_overhang = ==line_width*0.175/line_width
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg
new file mode 100644
index 0000000000..1a0e6ee70f
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-OKS_C.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_pva-oks
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width*3/4
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg
new file mode 100644
index 0000000000..b8f3efe568
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_A.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_pva-s
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 65
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width*3/4
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg
new file mode 100644
index 0000000000..8e660b7b74
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_B.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_pva-s
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width*3/4
+support_xy_distance_overhang = ==line_width*0.175/line_width
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg
new file mode 100644
index 0000000000..a19f11225e
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PVA-S_C.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_pva-s
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width*3/4
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_A.inst.cfg
new file mode 100644
index 0000000000..604f73f67c
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_A.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_tpu98a
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.38
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.38
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.38
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.38
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 30
+speed_wall = =math.ceil(speed_print * 30/30)
+speed_wall_0 = =math.ceil(speed_print * 25/30)
+speed_topbottom = =math.ceil(speed_print * 25/30)
+speed_layer_0 = =math.ceil(speed_print * 20/30)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.2
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 0.5
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_B.inst.cfg
new file mode 100644
index 0000000000..50d7007419
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_B.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_tpu98a
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.38
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.38
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.38
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.38
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 35/35)
+speed_wall_0 = =math.ceil(speed_print * 27/35)
+speed_topbottom = =math.ceil(speed_print * 25/35)
+speed_layer_0 = =math.ceil(speed_print * 20/35)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.2
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 0.5
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_C.inst.cfg
new file mode 100644
index 0000000000..ac1e22489d
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_TPU98A_C.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_tpu98a
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.38
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.38
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.38
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.38
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 40/40)
+speed_wall_0 = =math.ceil(speed_print * 30/40)
+speed_topbottom = =math.ceil(speed_print * 27/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 7
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 100
+retraction_extra_prime_amount = 0.2
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 0.5
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg
new file mode 100644
index 0000000000..9ec3d02a87
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_B.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = b
+weight = 1
+material = generic_abs
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.53
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.53
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 3/4)
+speed_wall_0 = =math.ceil(speed_wall * 2/3)
+speed_topbottom = =math.ceil(speed_print * 2/3)
+speed_layer_0 = =math.ceil(speed_print * 0.5)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg
new file mode 100644
index 0000000000..ae8a264806
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_C.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = 0
+material = generic_abs
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.53
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.53
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 55
+speed_wall = =math.ceil(speed_print * 3/4)
+speed_wall_0 = =math.ceil(speed_wall * 2/3)
+speed_topbottom = =math.ceil(speed_print * 2/3)
+speed_layer_0 = =math.ceil(speed_print * 0.5)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg
new file mode 100644
index 0000000000..6f43eebf5d
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ABS_D.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = d
+weight = -1
+material = generic_abs
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.53
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.53
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 60
+speed_wall = =math.ceil(speed_print * 3/4)
+speed_wall_0 = =math.ceil(speed_wall * 2/3)
+speed_topbottom = =math.ceil(speed_print * 2/3)
+speed_layer_0 = =math.ceil(speed_print * 0.5)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature +5
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_B.inst.cfg
new file mode 100644
index 0000000000..d5a6e45963
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_B.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = b
+weight = 1
+material = emotiontech_asax
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.53
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.53
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 55
+speed_wall = =math.ceil(speed_print * 3/4)
+speed_wall_0 = =math.ceil(speed_wall * 2/3)
+speed_topbottom = =math.ceil(speed_print * 2/3)
+speed_layer_0 = =math.ceil(speed_print * 0.5)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature + 2
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_C.inst.cfg
new file mode 100644
index 0000000000..47ec9e88e0
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_C.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = 0
+material = emotiontech_asax
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.53
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.53
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 60
+speed_wall = =math.ceil(speed_print * 3/4)
+speed_wall_0 = =math.ceil(speed_wall * 2/3)
+speed_topbottom = =math.ceil(speed_print * 2/3)
+speed_layer_0 = =math.ceil(speed_print * 0.5)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_D.inst.cfg
new file mode 100644
index 0000000000..3f9528cb4d
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_ASA-X_D.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = d
+weight = -1
+material = emotiontech_asax
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.53
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.53
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 65
+speed_wall = =math.ceil(speed_print * 3/4)
+speed_wall_0 = =math.ceil(speed_wall * 2/3)
+speed_topbottom = =math.ceil(speed_print * 2/3)
+speed_layer_0 = =math.ceil(speed_print * 0.5)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 8
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_Nylon-1030_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_Nylon-1030_C.inst.cfg
new file mode 100644
index 0000000000..16febe6cad
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_Nylon-1030_C.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = 0
+material = emotiontech_nylon_1030
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.6
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.7
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 60
+speed_wall = =math.ceil(speed_print * 30/60)
+speed_wall_0 = =math.ceil(speed_print * 23/60)
+speed_topbottom = =math.ceil(speed_print * 30/60)
+speed_layer_0 = =math.ceil(speed_print * 20/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 8
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 93
+retraction_extra_prime_amount = 0
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 30
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_B.inst.cfg
new file mode 100644
index 0000000000..4d5d6f50e5
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_B.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = b
+weight = 1
+material = generic_petg
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 45
+speed_wall = =math.ceil(speed_print * 3/4)
+speed_wall_0 = =math.ceil(speed_wall * 2/3)
+speed_topbottom = =math.ceil(speed_print * 2/3)
+speed_layer_0 = =math.ceil(speed_print * 0.5)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 70
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 87
+retraction_extra_prime_amount = 0
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_C.inst.cfg
new file mode 100644
index 0000000000..47834bf58f
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_C.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = 0
+material = generic_petg
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 3/4)
+speed_wall_0 = =math.ceil(speed_wall * 2/3)
+speed_topbottom = =math.ceil(speed_print * 2/3)
+speed_layer_0 = =math.ceil(speed_print * 0.5)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 70
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 87
+retraction_extra_prime_amount = 0
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_D.inst.cfg
new file mode 100644
index 0000000000..f3a1ee8335
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PETG_D.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = d
+weight = -1
+material = generic_petg
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 55
+speed_wall = =math.ceil(speed_print * 3/4)
+speed_wall_0 = =math.ceil(speed_wall * 2/3)
+speed_topbottom = =math.ceil(speed_print * 2/3)
+speed_layer_0 = =math.ceil(speed_print * 0.5)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 70
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature +5
+material_flow = 87
+retraction_extra_prime_amount = 0
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_B.inst.cfg
new file mode 100644
index 0000000000..9e1418e19b
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_B.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = b
+weight = 1
+material = generic_pla
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.47
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.53
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.45
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 55
+speed_wall = =math.ceil(speed_print * 3/4)
+speed_wall_0 = =math.ceil(speed_wall * 2/3)
+speed_topbottom = =math.ceil(speed_print * 2/3)
+speed_layer_0 = =math.ceil(speed_print * 0.5)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_C.inst.cfg
new file mode 100644
index 0000000000..900b35a677
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_C.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = 0
+material = generic_pla
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.47
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.53
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.45
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 60
+speed_wall = =math.ceil(speed_print * 3/4)
+speed_wall_0 = =math.ceil(speed_wall * 2/3)
+speed_topbottom = =math.ceil(speed_print * 2/3)
+speed_layer_0 = =math.ceil(speed_print * 0.5)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 8
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_D.inst.cfg
new file mode 100644
index 0000000000..8fc917fa9b
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_D.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = d
+weight = -1
+material = generic_pla
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.47
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.53
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.45
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 65
+speed_wall = =math.ceil(speed_print * 3/4)
+speed_wall_0 = =math.ceil(speed_wall * 2/3)
+speed_topbottom = =math.ceil(speed_print * 2/3)
+speed_layer_0 = =math.ceil(speed_print * 0.5)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg
new file mode 100644
index 0000000000..c3d67b70c3
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_B.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = b
+weight = 1
+material = emotiontech_pva-m
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.75
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 2.5
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg
new file mode 100644
index 0000000000..ddde828252
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_C.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = 0
+material = emotiontech_pva-m
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.75
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 2.5
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg
new file mode 100644
index 0000000000..505ee183ea
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-M_D.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = d
+weight = -1
+material = emotiontech_pva-m
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.75
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 2.5
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg
new file mode 100644
index 0000000000..229eafee39
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_B.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = b
+weight = 1
+material = emotiontech_pva-oks
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.75
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 2.5
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg
new file mode 100644
index 0000000000..b53da2b016
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_C.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = 0
+material = emotiontech_pva-oks
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.75
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 2.5
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg
new file mode 100644
index 0000000000..ea93e23b78
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-OKS_D.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = d
+weight = -1
+material = emotiontech_pva-oks
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.75
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 2.5
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg
new file mode 100644
index 0000000000..8a1d787043
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_B.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = b
+weight = 1
+material = emotiontech_pva-s
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.75
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 2.5
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg
new file mode 100644
index 0000000000..778d13f6fa
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_C.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = 0
+material = emotiontech_pva-s
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.75
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 2.5
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg
new file mode 100644
index 0000000000..b4b89a8f2b
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PVA-S_D.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = d
+weight = -1
+material = emotiontech_pva-s
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.75
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 2.5
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True 
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_B.inst.cfg
new file mode 100644
index 0000000000..ea4e6af87f
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_B.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = b
+weight = 1
+material = emotiontech_tpu98a
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.59
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.49
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.54
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.54
+wall_0_wipe_dist = =machine_nozzle_size
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 4/4)
+speed_wall_0 = =math.ceil(speed_wall * 3/4)
+speed_topbottom = =math.ceil(speed_print * 2/3)
+speed_support = =speed_wall_0
+speed_layer_0 = =math.ceil(speed_print * 20/35)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.2
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 0.7
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_C.inst.cfg
new file mode 100644
index 0000000000..7655025553
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_C.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = 0
+material = emotiontech_tpu98a
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.59
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.49
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.54
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.54
+wall_0_wipe_dist = =machine_nozzle_size
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 4/4)
+speed_wall_0 = =math.ceil(speed_wall * 3/4)
+speed_topbottom = =math.ceil(speed_print * 2/3)
+speed_support = =speed_wall_0
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.2
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 0.7
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_D.inst.cfg
new file mode 100644
index 0000000000..2ed874dcc8
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_TPU98A_D.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = d
+weight = -1
+material = emotiontech_tpu98a
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.59
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.49
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.54
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.54
+wall_0_wipe_dist = =machine_nozzle_size
+speed_print = 45
+speed_wall = =math.ceil(speed_print * 4/4)
+speed_wall_0 = =math.ceil(speed_wall * 3/4)
+speed_topbottom = =math.ceil(speed_print * 2/3)
+speed_layer_0 = =math.ceil(speed_print * 20/45)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 7
+material_print_temperature_layer_0 = =default_material_print_temperature +3
+material_flow = 100
+retraction_extra_prime_amount = 0.2
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 0.7
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg
new file mode 100644
index 0000000000..d108b49387
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_C.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = 1
+material = generic_abs
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.7
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 2
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg
new file mode 100644
index 0000000000..be7dc9e4d5
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_D.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = d
+weight = 0
+material = generic_abs
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.7
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 2
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg
new file mode 100644
index 0000000000..b030983ba4
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_ABS_E.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = e
+weight = -1
+material = generic_abs
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.7
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature +5
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 2
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_C.inst.cfg
new file mode 100644
index 0000000000..f59341929a
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_C.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = 1
+material = generic_petg
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_D.inst.cfg
new file mode 100644
index 0000000000..fc549d5200
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_D.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = d
+weight = 0
+material = generic_petg
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_E.inst.cfg
new file mode 100644
index 0000000000..2099dee307
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PETG_E.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = e
+weight = -1
+material = generic_petg
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature +5
+material_flow = 93
+retraction_extra_prime_amount = 0
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_C.inst.cfg
new file mode 100644
index 0000000000..01683d8376
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_C.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = 1
+material = generic_pla
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_D.inst.cfg
new file mode 100644
index 0000000000..ff3849b17f
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_D.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = d
+weight = 0
+material = generic_pla
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature +3
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_E.inst.cfg
new file mode 100644
index 0000000000..aaff46baeb
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_E.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = e
+weight = -1
+material = generic_pla
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.62
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.65
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.5625
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature +5
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg
new file mode 100644
index 0000000000..d8775a20df
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_C.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = 1
+material = emotiontech_pvaoks
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.7
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 25/30)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.75
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 2
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg
new file mode 100644
index 0000000000..749caf38a6
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_D.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = d
+weight = 0
+material = emotiontech_pvaoks
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.7
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 25/30)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.75
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 2
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg
new file mode 100644
index 0000000000..8314799002
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PVA-OKS_E.inst.cfg
@@ -0,0 +1,49 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = e
+weight = -1
+material = emotiontech_pvaoks
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.7
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.7
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 25/30)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.75
+support_xy_distance_overhang = =line_width*0.175/line_width
+support_offset = 2
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_C.inst.cfg
new file mode 100644
index 0000000000..6509ee4b68
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_C.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = 1
+material = emotiontech_tpu
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.6
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.7
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7
+wall_0_wipe_dist = =machine_nozzle_size
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 35/35)
+speed_wall_0 = =math.ceil(speed_wall * 27/35)
+speed_topbottom = =math.ceil(speed_print * 23/35)
+speed_layer_0 = =math.ceil(speed_print * 20/35)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 0.7
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_D.inst.cfg
new file mode 100644
index 0000000000..f6fd55eb13
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_D.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = d
+weight = 0
+material = emotiontech_tpu
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.6
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.7
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7
+wall_0_wipe_dist = =machine_nozzle_size
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 35/35)
+speed_wall_0 = =math.ceil(speed_wall * 27/35)
+speed_topbottom = =math.ceil(speed_print * 23/35)
+speed_layer_0 = =math.ceil(speed_print * 20/35)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 0.7
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_E.inst.cfg
new file mode 100644
index 0000000000..2b1928c418
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_TPU_E.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = e
+weight = -1
+material = emotiontech_tpu
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.6
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*0.7
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.7
+wall_0_wipe_dist = =machine_nozzle_size
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 35/35)
+speed_wall_0 = =math.ceil(speed_wall * 27/35)
+speed_topbottom = =math.ceil(speed_print * 23/35)
+speed_layer_0 = =math.ceil(speed_print * 20/35)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 7
+material_print_temperature_layer_0 = =default_material_print_temperature +3
+material_flow = 100
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 0.7
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_1.2/s3d_std1.2_PLA_H.inst.cfg b/resources/quality/strateo3d/Standard_1.2/s3d_std1.2_PLA_H.inst.cfg
new file mode 100644
index 0000000000..ef9d7409e4
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2/s3d_std1.2_PLA_H.inst.cfg
@@ -0,0 +1,48 @@
+[general]
+version = 4
+name = H
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = h
+weight = -1
+material = generic_pla
+variant = Standard 1.2
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.0
+infill_line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+support_line_width = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 27/35)
+speed_wall_0 = =math.ceil(speed_print * 23/35)
+speed_topbottom = =math.ceil(speed_print * 30/35)
+speed_layer_0 = =math.ceil(speed_print * 25/35)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 91
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/s3d_global_A.inst.cfg b/resources/quality/strateo3d/s3d_global_A.inst.cfg
new file mode 100644
index 0000000000..9a972ff1d9
--- /dev/null
+++ b/resources/quality/strateo3d/s3d_global_A.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Extra Fine Quality
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = a
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.1
\ No newline at end of file
diff --git a/resources/quality/strateo3d/s3d_global_B.inst.cfg b/resources/quality/strateo3d/s3d_global_B.inst.cfg
new file mode 100644
index 0000000000..c9cb8b219a
--- /dev/null
+++ b/resources/quality/strateo3d/s3d_global_B.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Fine Quality
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = b
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.2
\ No newline at end of file
diff --git a/resources/quality/strateo3d/s3d_global_C.inst.cfg b/resources/quality/strateo3d/s3d_global_C.inst.cfg
new file mode 100644
index 0000000000..7c3a0953b6
--- /dev/null
+++ b/resources/quality/strateo3d/s3d_global_C.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = High Quality
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = c
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.3
\ No newline at end of file
diff --git a/resources/quality/strateo3d/s3d_global_D.inst.cfg b/resources/quality/strateo3d/s3d_global_D.inst.cfg
new file mode 100644
index 0000000000..d5620092b7
--- /dev/null
+++ b/resources/quality/strateo3d/s3d_global_D.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Medium Quality
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = d
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.4
\ No newline at end of file
diff --git a/resources/quality/strateo3d/s3d_global_E.inst.cfg b/resources/quality/strateo3d/s3d_global_E.inst.cfg
new file mode 100644
index 0000000000..34de855053
--- /dev/null
+++ b/resources/quality/strateo3d/s3d_global_E.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Low Quality
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = e
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.5
diff --git a/resources/quality/strateo3d/s3d_global_F.inst.cfg b/resources/quality/strateo3d/s3d_global_F.inst.cfg
new file mode 100644
index 0000000000..99f1de8283
--- /dev/null
+++ b/resources/quality/strateo3d/s3d_global_F.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Coarse Quality
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = f
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.6
diff --git a/resources/quality/strateo3d/s3d_global_G.inst.cfg b/resources/quality/strateo3d/s3d_global_G.inst.cfg
new file mode 100644
index 0000000000..56db6800a8
--- /dev/null
+++ b/resources/quality/strateo3d/s3d_global_G.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Extra Coarse Quality
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = g
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.7
diff --git a/resources/quality/strateo3d/s3d_global_H.inst.cfg b/resources/quality/strateo3d/s3d_global_H.inst.cfg
new file mode 100644
index 0000000000..a594bc7b50
--- /dev/null
+++ b/resources/quality/strateo3d/s3d_global_H.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Ultra Coarse Quality
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = h
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.8
diff --git a/resources/variants/strateo3d_standard_04.inst.cfg b/resources/variants/strateo3d_standard_04.inst.cfg
new file mode 100644
index 0000000000..f48df8dd8d
--- /dev/null
+++ b/resources/variants/strateo3d_standard_04.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+name = Standard 0.4
+version = 4
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_id = Standard 0.4
+machine_nozzle_size = 0.4
+machine_nozzle_tip_outer_diameter = 1.0
+layer_height = 0.2
+layer_height_0 = 0.3
+prime_tower_enable = True
+retract_at_layer_change = False
+support_angle = 60
+support_use_towers = True
+top_bottom_thickness = =4*layer_height
\ No newline at end of file
diff --git a/resources/variants/strateo3d_standard_06.inst.cfg b/resources/variants/strateo3d_standard_06.inst.cfg
new file mode 100644
index 0000000000..7c96ac0847
--- /dev/null
+++ b/resources/variants/strateo3d_standard_06.inst.cfg
@@ -0,0 +1,21 @@
+[general]
+name = Standard 0.6
+version = 4
+definition = strateo3d
+
+[metadata]
+setting_version = 7
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_id = Standard 0.6
+machine_nozzle_size = 0.6
+machine_nozzle_tip_outer_diameter = 1.5
+layer_height = 0.3
+layer_height_0 = 0.4
+prime_tower_enable = True
+retract_at_layer_change = False
+support_angle = 55
+support_use_towers = True
+top_bottom_thickness = =4*layer_height
\ No newline at end of file