Create makeit_pro_l

2025-05-14 01:28:04 +08:00 · 2017-03-16 15:30:42 -07:00 · 2017-03-16 15:30:42 -07:00 · d0ce717add
commit d0ce717add
parent 7604ae62f3
1 changed files with 130 additions and 0 deletions
--- a/resources/definitions/makeit_pro_l
+++ b/resources/definitions/makeit_pro_l
@ -0,0 +1,130 @@
+{
+    "id": "makeit_pro_l",
+    "version": 2,
+    "name": "MAKEiT_ProL",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "NA",
+        "manufacturer": "NA",
+        "category": "Other",
+        "weight": -1,
+        "file_formats": "text/x-gcode",
+        "has_materials": false,
+        "supported_actions": [ "MachineSettingsAction", "UpgradeFirmware" ],
+        "machine_extruder_trains":
+        {
+            "0": "makeit_l_dual_1st",
+            "1": "makeit_l_dual_2nd"
+        }
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "MAKEiT ProL" },
+        "machine_width": {
+            "default_value": 305
+        },
+        "machine_height": {
+            "default_value": 330
+        },
+        "machine_depth": {
+            "default_value": 254
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_nozzle_size": {
+            "default_value": 0.4
+        },
+        "machine_nozzle_heat_up_speed": {
+            "default_value": 2
+        },
+        "machine_nozzle_cool_down_speed": {
+            "default_value": 2
+        },
+        "machine_head_with_fans_polygon":
+        {
+            "default_value": [
+                [ -305, 28 ],
+                [ -305, -28 ],
+                [ 305, 28 ],
+                [ 305, -28 ]
+            ]
+        },
+        "gantry_height": {
+            "default_value": 330
+        },
+        "machine_use_extruder_offset_to_offset_coords": {
+            "default_value": true
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap (Marlin/Sprinter)"
+        },
+        "machine_start_gcode": {
+            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG28 ;home\nG1 F200 E30 ;extrude 30 mm of feed stock\nG92 E0 ;zero the extruded length\nG1 E-5 ;retract 5 mm\nG28 SC ;Do homeing, clean nozzles and let printer to know that printing started\nG92 X-6 ;Sets Curas checker board to match printers heated bed coordinates\nG1 F{speed_travel}\nM117 Printing..."
+        },
+        "machine_end_gcode": {
+            "default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-5 F9000  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5 X+20 Y+20 F9000 ;move Z up a bit\nM117 MAKEiT Pro@Done\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\nM81"
+        },
+        "machine_extruder_count": {
+            "default_value": 2
+        },
+        "print_sequence": {
+            "enabled": true
+        },
+        "prime_tower_position_x": {
+            "default_value": 185
+        },
+        "prime_tower_position_y": {
+            "default_value": 160
+        },
+        "material_diameter": {
+          "default_value": 1.75
+        },
+        "layer_height": {
+          "default_value": 0.2
+        },
+        "retraction_speed": {
+          "default_value": 180
+        },
+        "infill_sparse_density": {
+          "default_value": 20
+        },
+        "retraction_amount": {
+          "default_value": 6
+        },
+        "retraction_min_travel": {
+          "default_value": 1.5
+        },
+        "speed_travel": {
+          "default_value": 150
+        },
+        "speed_print": {
+          "default_value": 60
+        },
+        "wall_thickness": {
+          "default_value": 1.2
+        },
+        "bottom_thickness": {
+          "default_value": 0.2
+        },
+        "speed_layer_0": {
+          "default_value": 20
+        },
+        "speed_print_layer_0": {
+          "default_value": 20
+        },
+        "cool_min_layer_time_fan_speed_max": {
+          "default_value": 5
+        },
+        "adhesion_type": {
+          "default_value": "skirt"
+        },
+        "machine_heated_bed": {
+            "default_value": true
+        },
+        "machine_heat_zone_length": {
+            "default_value": 20
+        }
+    }
+}