diff --git a/resources/definitions/weedo_base.def.json b/resources/definitions/weedo_base.def.json index d6891ee750..305f4f081b 100644 --- a/resources/definitions/weedo_base.def.json +++ b/resources/definitions/weedo_base.def.json @@ -1,326 +1,230 @@ -{ - "version":2, - "name":"WEEDO Base", - "inherits":"fdmprinter", - "metadata":{ - "author":"WEEDO", - "manufacturer":"WEEDO", - "visible":false, - "file_formats":"text/x-gcode", - "machine_extruder_trains":{ - "0":"weedo_base_extruder_0" - }, - "has_materials":true, - "has_variants":false, - "has_machine_quality":false, - "preferred_quality_type":"draft", - "preferred_material":"generic_pla_175", - "exclude_materials":[ - "3D-Fuel_PLA_PRO_Black", - "3D-Fuel_PLA_SnapSupport", - "bestfilament_abs_skyblue", - "bestfilament_petg_orange", - "bestfilament_pla_green", - "leapfrog_abs_natural", - "leapfrog_epla_natural", - "leapfrog_pva_natural", - "generic_pc_175", - "goofoo_abs", - "goofoo_asa", - "goofoo_bronze_pla", - "goofoo_emarble_pla", - "goofoo_esilk_pla", - "goofoo_hips", - "goofoo_pa_cf", - "goofoo_pa", - "goofoo_pc", - "goofoo_peek", - "goofoo_petg", - "goofoo_pla", - "goofoo_pva", - "goofoo_tpe_83a", - "goofoo_tpu_87a", - "goofoo_tpu_95a", - "goofoo_wood_pla", - "emotiontech_abs", - "emotiontech_absx", - "emotiontech_acetate", - "emotiontech_asax", - "emotiontech_bvoh", - "emotiontech_copa", - "emotiontech_hips", - "emotiontech_nylon_1030", - "emotiontech_nylon_1030cf", - "emotiontech_nylon_1070", - "emotiontech_pc", - "emotiontech_pekk", - "emotiontech_petg", - "emotiontech_pla", - "emotiontech_pla_hr_870", - "emotiontech_pva-m", - "emotiontech_pva-s", - "emotiontech_tpu98a", - "eryone_petg", - "eryone_pla_glow", - "eryone_pla_matte", - "eryone_pla_wood", - "eryone_pla", - "eryone_tpu", - "eSUN_PETG_Black", - "eSUN_PETG_Grey", - "eSUN_PETG_Purple", - "eSUN_PLA_PRO_Black", - "eSUN_PLA_PRO_Grey", - "eSUN_PLA_PRO_Purple", - "eSUN_PLA_PRO_White", - "Extrudr_GreenTECPro_Anthracite_175", - "Extrudr_GreenTECPro_Black_175", - "Extrudr_GreenTECPro_Blue_175", - "Extrudr_GreenTECPro_Nature_175", - "Extrudr_GreenTECPro_Red_175", - "Extrudr_GreenTECPro_Silver_175", - "Extrudr_GreenTECPro_White_175", - "verbatim_bvoh_175", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "chromatik_pla", - "dsm_arnitel2045_175", - "dsm_novamid1070_175", - "fabtotum_abs", - "fabtotum_nylon", - "fabtotum_pla", - "fabtotum_tpu", - "fdplast_abs_tomato", - "fdplast_petg_gray", - "fdplast_pla_olive", - "fiberlogy_hd_pla", - "filo3d_pla", - "filo3d_pla_green", - "filo3d_pla_red", - "imade3d_petg_green", - "imade3d_petg_pink", - "imade3d_pla_green", - "imade3d_pla_pink", - "imade3d_petg_175", - "imade3d_pla_175", - "innofill_innoflex60_175", - "layer_one_black_pla", - "layer_one_dark_gray_pla", - "layer_one_white_pla", - "octofiber_pla", - "polyflex_pla", - "polymax_pla", - "polyplus_pla", - "polywood_pla", - "redd_abs", - "redd_asa", - "redd_hips", - "redd_nylon", - "redd_petg", - "redd_pla", - "redd_tpe", - "tizyx_abs", - "tizyx_flex", - "tizyx_petg", - "tizyx_pla_bois", - "tizyx_pla", - "tizyx_pva", - "Vertex_Delta_ABS", - "Vertex_Delta_PET", - "Vertex_Delta_PLA_Glitter", - "Vertex_Delta_PLA_Mat", - "Vertex_Delta_PLA_Satin", - "Vertex_Delta_PLA_Wood", - "Vertex_Delta_PLA", - "Vertex_Delta_TPU", - "volumic_abs_ultra", - "volumic_arma_ultra", - "volumic_asa_ultra", - "volumic_br80_ultra", - "volumic_bumper_ultra", - "volumic_cu80_ultra", - "volumic_flex93_ultra", - "volumic_medical_ultra", - "volumic_nylon_ultra", - "volumic_pekk_carbone", - "volumic_petg_ultra", - "volumic_petgcarbone_ultra", - "volumic_pla_ultra", - "volumic_pp_ultra", - "volumic_strong_ultra", - "volumic_support_ultra", - "xyzprinting_abs", - "xyzprinting_antibact_pla", - "xyzprinting_carbon_fiber", - "xyzprinting_colorinkjet_pla", - "xyzprinting_flexible", - "xyzprinting_metallic_pla", - "xyzprinting_nylon", - "xyzprinting_petg", - "xyzprinting_pla", - "xyzprinting_tough_pla", - "xyzprinting_tpu", - "zyyx_pro_flex", - "zyyx_pro_pla" - ] - }, - "overrides":{ - "material_bed_temp_wait":{ - "default_value":false - }, - "material_print_temp_wait":{ - "default_value":false - }, - "material_diameter":{ - "default_value":1.75 - }, - "machine_nozzle_size":{ - "default_value":0.4 - }, - "machine_steps_per_mm_x":{ - "default_value":94 - }, - "machine_steps_per_mm_y":{ - "default_value":94 - }, - "machine_steps_per_mm_z":{ - "default_value":400 - }, - "machine_steps_per_mm_e":{ - "default_value":96 - }, - "machine_max_feedrate_x":{ - "default_value":250 - }, - "machine_max_feedrate_y":{ - "default_value":250 - }, - "machine_max_feedrate_z":{ - "default_value":10 - }, - "machine_max_feedrate_e":{ - "default_value":45 - }, - "machine_endstop_positive_direction_x":{ - "default_value":true - }, - "machine_endstop_positive_direction_y":{ - "default_value":true - }, - "machine_endstop_positive_direction_z":{ - "default_value":false - }, - "machine_feeder_wheel_diameter":{ - "default_value":10.61 - }, - "infill_sparse_density":{ - "default_value":10 - }, - "material_flow":{ - "default_value":95 - }, - "material_standby_temperature":{ - "minimum_value":"0" - }, - "material_print_temp_prepend":{ - "default_value":false - }, - "default_material_bed_temperature":{ - "default_value":35 - }, - "speed_wall":{ - "value":"max(5,round(speed_print / 2,1))" - }, - "speed_wall_0":{ - "value":"max(5,speed_wall-5)" - }, - "speed_wall_x":{ - "value":"speed_wall" - }, - "speed_topbottom":{ - "value":"round(speed_print * 0.65,1)" - }, - "speed_support":{ - "value":"round(speed_print*0.82,1)" - }, - "speed_support_interface":{ - "value":"round(speed_support*0.689,1)" - }, - "speed_prime_tower":{ - "value":"speed_support" - }, - "speed_travel":{ - "value":105.0 - }, - "speed_layer_0":{ - "value":26.0 - }, - "speed_print_layer_0":{ - "value":26.0 - }, - "speed_travel_layer_0":{ - "value":80.0 - }, - "skirt_brim_speed":{ - "value":26.0 - }, - "retraction_amount":{ - "default_value":1.5 - }, - "retraction_speed":{ - "default_value":28 - }, - "switch_extruder_retraction_amount":{ - "value":16.5 - }, - "switch_extruder_retraction_speeds":{ - "default_value":28 - }, - "retraction_combing":{ - "value":"off" - }, - "support_angle":{ - "default_value":60 - }, - "support_interface_pattern":{ - "default_value":"lines" - }, - "adhesion_type":{ - "default_value":"raft" - }, - "raft_margin":{ - "default_value":8 - }, - "raft_airgap":{ - "default_value":0.22 - }, - "raft_surface_speed":{ - "value":40 - }, - "raft_interface_speed":{ - "value":33 - }, - "raft_base_speed":{ - "value":20 - }, - "extruder_prime_pos_y":{ - "minimum_value":"0", - "maximum_value":"machine_depth" - }, - "extruder_prime_pos_x":{ - "minimum_value":"0", - "maximum_value":"machine_width" - }, - "prime_tower_size":{ - "default_value":15 - }, - "prime_tower_min_volume":{ - "default_value":10 - }, - "raft_surface_fan_speed":{ - "value":100 - } - } -} +{ + "version": 2, + "name": "WEEDO Base", + "inherits": "fdmprinter", + "metadata": + { + "visible": false, + "author": "WEEDO", + "manufacturer": "WEEDO", + "file_formats": "text/x-gcode", + "exclude_materials": [ + "3D-Fuel_PLA_PRO_Black", + "3D-Fuel_PLA_SnapSupport", + "bestfilament_abs_skyblue", + "bestfilament_petg_orange", + "bestfilament_pla_green", + "leapfrog_abs_natural", + "leapfrog_epla_natural", + "leapfrog_pva_natural", + "generic_pc_175", + "goofoo_abs", + "goofoo_asa", + "goofoo_bronze_pla", + "goofoo_emarble_pla", + "goofoo_esilk_pla", + "goofoo_hips", + "goofoo_pa_cf", + "goofoo_pa", + "goofoo_pc", + "goofoo_peek", + "goofoo_petg", + "goofoo_pla", + "goofoo_pva", + "goofoo_tpe_83a", + "goofoo_tpu_87a", + "goofoo_tpu_95a", + "goofoo_wood_pla", + "emotiontech_abs", + "emotiontech_absx", + "emotiontech_acetate", + "emotiontech_asax", + "emotiontech_bvoh", + "emotiontech_copa", + "emotiontech_hips", + "emotiontech_nylon_1030", + "emotiontech_nylon_1030cf", + "emotiontech_nylon_1070", + "emotiontech_pc", + "emotiontech_pekk", + "emotiontech_petg", + "emotiontech_pla", + "emotiontech_pla_hr_870", + "emotiontech_pva-m", + "emotiontech_pva-s", + "emotiontech_tpu98a", + "eryone_petg", + "eryone_pla_glow", + "eryone_pla_matte", + "eryone_pla_wood", + "eryone_pla", + "eryone_tpu", + "eSUN_PETG_Black", + "eSUN_PETG_Grey", + "eSUN_PETG_Purple", + "eSUN_PLA_PRO_Black", + "eSUN_PLA_PRO_Grey", + "eSUN_PLA_PRO_Purple", + "eSUN_PLA_PRO_White", + "Extrudr_GreenTECPro_Anthracite_175", + "Extrudr_GreenTECPro_Black_175", + "Extrudr_GreenTECPro_Blue_175", + "Extrudr_GreenTECPro_Nature_175", + "Extrudr_GreenTECPro_Red_175", + "Extrudr_GreenTECPro_Silver_175", + "Extrudr_GreenTECPro_White_175", + "verbatim_bvoh_175", + "Vertex_Delta_ABS", + "Vertex_Delta_PET", + "Vertex_Delta_PLA", + "Vertex_Delta_TPU", + "chromatik_pla", + "dsm_arnitel2045_175", + "dsm_novamid1070_175", + "fabtotum_abs", + "fabtotum_nylon", + "fabtotum_pla", + "fabtotum_tpu", + "fdplast_abs_tomato", + "fdplast_petg_gray", + "fdplast_pla_olive", + "fiberlogy_hd_pla", + "filo3d_pla", + "filo3d_pla_green", + "filo3d_pla_red", + "imade3d_petg_green", + "imade3d_petg_pink", + "imade3d_pla_green", + "imade3d_pla_pink", + "imade3d_petg_175", + "imade3d_pla_175", + "innofill_innoflex60_175", + "layer_one_black_pla", + "layer_one_dark_gray_pla", + "layer_one_white_pla", + "octofiber_pla", + "polyflex_pla", + "polymax_pla", + "polyplus_pla", + "polywood_pla", + "redd_abs", + "redd_asa", + "redd_hips", + "redd_nylon", + "redd_petg", + "redd_pla", + "redd_tpe", + "tizyx_abs", + "tizyx_flex", + "tizyx_petg", + "tizyx_pla_bois", + "tizyx_pla", + "tizyx_pva", + "Vertex_Delta_ABS", + "Vertex_Delta_PET", + "Vertex_Delta_PLA_Glitter", + "Vertex_Delta_PLA_Mat", + "Vertex_Delta_PLA_Satin", + "Vertex_Delta_PLA_Wood", + "Vertex_Delta_PLA", + "Vertex_Delta_TPU", + "volumic_abs_ultra", + "volumic_arma_ultra", + "volumic_asa_ultra", + "volumic_br80_ultra", + "volumic_bumper_ultra", + "volumic_cu80_ultra", + "volumic_flex93_ultra", + "volumic_medical_ultra", + "volumic_nylon_ultra", + "volumic_pekk_carbone", + "volumic_petg_ultra", + "volumic_petgcarbone_ultra", + "volumic_pla_ultra", + "volumic_pp_ultra", + "volumic_strong_ultra", + "volumic_support_ultra", + "xyzprinting_abs", + "xyzprinting_antibact_pla", + "xyzprinting_carbon_fiber", + "xyzprinting_colorinkjet_pla", + "xyzprinting_flexible", + "xyzprinting_metallic_pla", + "xyzprinting_nylon", + "xyzprinting_petg", + "xyzprinting_pla", + "xyzprinting_tough_pla", + "xyzprinting_tpu", + "zyyx_pro_flex", + "zyyx_pro_pla" + ], + "has_machine_quality": false, + "has_materials": true, + "has_variants": false, + "machine_extruder_trains": { "0": "weedo_base_extruder_0" }, + "preferred_material": "generic_pla_175", + "preferred_quality_type": "draft" + }, + "overrides": + { + "adhesion_type": { "default_value": "raft" }, + "default_material_bed_temperature": { "default_value": 35 }, + "extruder_prime_pos_x": + { + "maximum_value": "machine_width", + "minimum_value": "0" + }, + "extruder_prime_pos_y": + { + "maximum_value": "machine_depth", + "minimum_value": "0" + }, + "infill_sparse_density": { "default_value": 10 }, + "machine_endstop_positive_direction_x": { "default_value": true }, + "machine_endstop_positive_direction_y": { "default_value": true }, + "machine_endstop_positive_direction_z": { "default_value": false }, + "machine_feeder_wheel_diameter": { "default_value": 10.61 }, + "machine_max_feedrate_e": { "default_value": 45 }, + "machine_max_feedrate_x": { "default_value": 250 }, + "machine_max_feedrate_y": { "default_value": 250 }, + "machine_max_feedrate_z": { "default_value": 10 }, + "machine_nozzle_size": { "default_value": 0.4 }, + "machine_steps_per_mm_e": { "default_value": 96 }, + "machine_steps_per_mm_x": { "default_value": 94 }, + "machine_steps_per_mm_y": { "default_value": 94 }, + "machine_steps_per_mm_z": { "default_value": 400 }, + "material_bed_temp_wait": { "default_value": false }, + "material_diameter": { "default_value": 1.75 }, + "material_flow": { "default_value": 95 }, + "material_print_temp_prepend": { "default_value": false }, + "material_print_temp_wait": { "default_value": false }, + "material_standby_temperature": { "minimum_value": "0" }, + "prime_tower_min_volume": { "default_value": 10 }, + "prime_tower_size": { "default_value": 15 }, + "raft_airgap": { "default_value": 0.22 }, + "raft_base_speed": { "value": 20 }, + "raft_interface_speed": { "value": 33 }, + "raft_margin": { "default_value": 8 }, + "raft_surface_fan_speed": { "value": 100 }, + "raft_surface_speed": { "value": 40 }, + "retraction_amount": { "default_value": 1.5 }, + "retraction_combing": { "value": "off" }, + "retraction_speed": { "default_value": 28 }, + "skirt_brim_speed": { "value": 26.0 }, + "speed_layer_0": { "value": 26.0 }, + "speed_prime_tower": { "value": "speed_support" }, + "speed_print_layer_0": { "value": 26.0 }, + "speed_support": { "value": "round(speed_print*0.82,1)" }, + "speed_support_interface": { "value": "round(speed_support*0.689,1)" }, + "speed_topbottom": { "value": "round(speed_print * 0.65,1)" }, + "speed_travel": { "value": 105.0 }, + "speed_travel_layer_0": { "value": 80.0 }, + "speed_wall": { "value": "max(5,round(speed_print / 2,1))" }, + "speed_wall_0": { "value": "max(5,speed_wall-5)" }, + "speed_wall_x": { "value": "speed_wall" }, + "support_angle": { "default_value": 60 }, + "support_interface_pattern": { "default_value": "lines" }, + "switch_extruder_retraction_amount": { "value": 16.5 }, + "switch_extruder_retraction_speeds": { "default_value": 28 } + } +} \ No newline at end of file diff --git a/resources/definitions/weefun_tina2.def.json b/resources/definitions/weefun_tina2.def.json index ba5a42a37a..ebe026b163 100644 --- a/resources/definitions/weefun_tina2.def.json +++ b/resources/definitions/weefun_tina2.def.json @@ -1,87 +1,43 @@ { - "name":"WEEFUN TINA2", - "version":2, - "inherits":"weedo_base", - "metadata":{ - "visible":true, - "author":"WEEFUN", - "manufacturer":"WEEFUN", - "file_formats":"text/x-gcode", - "platform_offset":[ - 0, - 0, - 0 - ] - }, - "overrides":{ - "machine_extruder_count":{ - "default_value":1 - }, - "machine_heated_bed":{ - "default_value":false - }, - "machine_center_is_zero":{ - "default_value":false - }, - "machine_height":{ - "default_value":100 - }, - "machine_depth":{ - "default_value":120 - }, - "machine_width":{ - "default_value":100 - }, - "machine_name":{ - "default_value":"WEEFUN TINA2" - }, - "machine_start_gcode":{ - "default_value":";(**** start.gcode for TINA2****)\nM104 S150\nG28 Z\nG28 X Y; Home extruder\nG1 X55 Y55 F1000\nG1 Z10 F200\nG29\nG1 Z15 F100\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nM109 S{material_print_temperature_layer_0}\nG92 E0 ; Reset extruder position\nG1 X90 Y6 Z0.27 F2000\nG1 X20 Y6 Z0.27 E15 F1000 \nG92 E0 ; Reset extruder position\n\nM203 Z5" - }, - "machine_end_gcode":{ - "default_value":";(**** end.gcode for TINA2****)\nM104 S0\nM107\nG92 E0 (Reset after prime)\nG0 E-1 F300\nG1 Z105 F300\nG28 X0 Y0\nG1 Y90 F1000\nM203 Z30" - }, - "retraction_amount":{ - "default_value":3 - }, - "retraction_speed":{ - "default_value":35 - }, - "support_xy_distance":{ - "default_value":1.0 - }, - "retraction_count_max":{ - "default_value":10 - }, - "speed_wall_0":{ - "value":20.0 - }, - "speed_wall_x":{ - "value":25.0 - }, - "speed_topbottom":{ - "value":30.0 - }, - "speed_infill":{ - "value":40.0 - }, - "speed_support_infill":{ - "value":45.0 - }, - "speed_print_layer_0":{ - "value":22.0 - }, - "speed_travel_layer_0":{ - "value":60 - }, - "speed_support_roof":{ - "value":30.0 - }, - "speed_support_bottom":{ - "dvalue":30.0 - }, - "speed_roofing":{ - "value":25.0 - } - } -} + "version": 2, + "name": "WEEFUN TINA2", + "inherits": "weedo_base", + "metadata": + { + "visible": true, + "author": "WEEFUN", + "manufacturer": "WEEFUN", + "file_formats": "text/x-gcode", + "platform_offset": [ + 0, + 0, + 0 + ] + }, + "overrides": + { + "machine_center_is_zero": { "default_value": false }, + "machine_depth": { "default_value": 120 }, + "machine_end_gcode": { "default_value": ";(**** end.gcode for TINA2****)\nM104 S0\nM107\nG92 E0 (Reset after prime)\nG0 E-1 F300\nG1 Z105 F300\nG28 X0 Y0\nG1 Y90 F1000\nM203 Z30" }, + "machine_extruder_count": { "default_value": 1 }, + "machine_heated_bed": { "default_value": false }, + "machine_height": { "default_value": 100 }, + "machine_name": { "default_value": "WEEFUN TINA2" }, + "machine_start_gcode": { "default_value": ";(**** start.gcode for TINA2****)\nM104 S150\nG28 Z\nG28 X Y; Home extruder\nG1 X55 Y55 F1000\nG1 Z10 F200\nG29\nG1 Z15 F100\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nM109 S{material_print_temperature_layer_0}\nG92 E0 ; Reset extruder position\nG1 X90 Y6 Z0.27 F2000\nG1 X20 Y6 Z0.27 E15 F1000 \nG92 E0 ; Reset extruder position\n\nM203 Z5" }, + "machine_width": { "default_value": 100 }, + "retraction_amount": { "default_value": 3 }, + "retraction_count_max": { "default_value": 10 }, + "retraction_speed": { "default_value": 35 }, + "speed_infill": { "value": 40.0 }, + "speed_print_layer_0": { "value": 22.0 }, + "speed_roofing": { "value": 25.0 }, + "speed_support_bottom": { "dvalue": 30.0 }, + "speed_support_infill": { "value": 45.0 }, + "speed_support_roof": { "value": 30.0 }, + "speed_topbottom": { "value": 30.0 }, + "speed_travel_layer_0": { "value": 60 }, + "speed_wall_0": { "value": 20.0 }, + "speed_wall_x": { "value": 25.0 }, + "support_xy_distance": { "default_value": 1.0 } + } +} \ No newline at end of file diff --git a/resources/definitions/weefun_tina2s.def.json b/resources/definitions/weefun_tina2s.def.json index cfc139bdfc..d23e0c356c 100644 --- a/resources/definitions/weefun_tina2s.def.json +++ b/resources/definitions/weefun_tina2s.def.json @@ -1,81 +1,41 @@ { - "name":"WEEFUN TINA2S", - "version":2, - "inherits":"weedo_base", - "metadata":{ - "visible":true, - "author":"WEEFUN", - "manufacturer":"WEEFUN", - "file_formats":"text/x-gcode", - "platform_offset":[ - 0, - 0, - 0 - ] - }, - "overrides":{ - "machine_extruder_count":{ - "default_value":1 - }, - "machine_heated_bed":{ - "default_value":true - }, - "machine_center_is_zero":{ - "default_value":false - }, - "machine_height":{ - "default_value":100 - }, - "machine_depth":{ - "default_value":120 - }, - "machine_width":{ - "default_value":100 - }, - "gantry_height":{ - "value":20 - }, - "machine_name":{ - "default_value":"WEEFUN TINA2S" - }, - "machine_start_gcode":{ - "default_value":";MachineType:TINA2S\n;FilamentType:{material_type}\n;Layer height:{layer_height}\n;Extruder0Temperature:{material_print_temperature}\n;BedTemperature:{material_bed_temperature}\n;InfillDensity:{infill_sparse_density}\n;(**** start.gcode for tina2s****)\nM203 Z5 ;Move Z axis up 5mm\nM117 Homing axes\nG28 Z; Home extruder axis Z\nG28 X Y; Home extruder axis X Y\nM117 Start Warm Up\nM140 S{material_bed_temperature} ;start heating the bed to what is set in Cura\nM104 S130 ;start heating E to 130 for preheat\nM190 S{material_bed_temperature} ;Wait for Bed Temperature\nM117 Levling the build plate\nG29\nG1 Z1.0 F3000 ;Move Z Axis up to 1mm\nG1 X0.5 Y1 ;Move hotend to starting position\nM117 Heating Hotend\nM104 S{material_initial_print_temperature} T0 ;start heating T0 to what is set in Cura\nM109 S{material_initial_print_temperature} T0 ;Wait for Hotend Temperature\nG92 E0 ;Reset Extruder\nM117 Purging and cleaning nozzle\nG1 X1.1 Y10 Z0.28 F1000.0 ;Move to start position\nG1 X1.1 Y90.0 Z0.28 F2000.0 E15 ;Draw the first line\nG1 X1.4 Y90.0 Z0.23 F5000.0 ;Move to side a little\nG1 X1.4 Y10 Z0.20 F2000.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X1 Y5 Z0.2 F5000.0 ;Move over to prevent blob squish\nM117 Printing..." - }, - "machine_end_gcode":{ - "default_value":";(**** end.gcode for tina2s****)\nM203 Z15 ;Move Z axis up 5mm\nM104 S0 ;Turn off extruder heating\nM140 S0 ;Turn off bed heating\nM107 ;Turn Fans off\nG92 E0 ;(Reset after prime)\nG0 E-1 F300 ;Retract Fillament 1mm\nG28 Z F300 ;Park Hotend up\nG28 X0 Y0 ;Park Hotend\nG1 Y90 F1000 ;Present finished model\nG0 E-2 F300 ;Retract Fillament 2mm\nM82 ;absolute extrusion mode\nM104 S0 ;Ensure hotend is off\nM117 Print Complete" - }, - "retraction_amount":{ - "default_value":3 - }, - "speed_wall_0":{ - "value":20.0 - }, - "speed_wall_x":{ - "value":25.0 - }, - "speed_topbottom":{ - "value":30.0 - }, - "speed_infill":{ - "value":40.0 - }, - "speed_support_infill":{ - "value":45.0 - }, - "speed_print_layer_0":{ - "value":22.0 - }, - "speed_travel_layer_0":{ - "value":60 - }, - "speed_support_roof":{ - "value":30.0 - }, - "speed_support_bottom":{ - "dvalue":30.0 - }, - "speed_roofing":{ - "value":25.0 - } - } -} + "version": 2, + "name": "WEEFUN TINA2S", + "inherits": "weedo_base", + "metadata": + { + "visible": true, + "author": "WEEFUN", + "manufacturer": "WEEFUN", + "file_formats": "text/x-gcode", + "platform_offset": [ + 0, + 0, + 0 + ] + }, + "overrides": + { + "gantry_height": { "value": 20 }, + "machine_center_is_zero": { "default_value": false }, + "machine_depth": { "default_value": 120 }, + "machine_end_gcode": { "default_value": ";(**** end.gcode for tina2s****)\nM203 Z15 ;Move Z axis up 5mm\nM104 S0 ;Turn off extruder heating\nM140 S0 ;Turn off bed heating\nM107 ;Turn Fans off\nG92 E0 ;(Reset after prime)\nG0 E-1 F300 ;Retract Fillament 1mm\nG28 Z F300 ;Park Hotend up\nG28 X0 Y0 ;Park Hotend\nG1 Y90 F1000 ;Present finished model\nG0 E-2 F300 ;Retract Fillament 2mm\nM82 ;absolute extrusion mode\nM104 S0 ;Ensure hotend is off\nM117 Print Complete" }, + "machine_extruder_count": { "default_value": 1 }, + "machine_heated_bed": { "default_value": true }, + "machine_height": { "default_value": 100 }, + "machine_name": { "default_value": "WEEFUN TINA2S" }, + "machine_start_gcode": { "default_value": ";MachineType:TINA2S\n;FilamentType:{material_type}\n;Layer height:{layer_height}\n;Extruder0Temperature:{material_print_temperature}\n;BedTemperature:{material_bed_temperature}\n;InfillDensity:{infill_sparse_density}\n;(**** start.gcode for tina2s****)\nM203 Z5 ;Move Z axis up 5mm\nM117 Homing axes\nG28 Z; Home extruder axis Z\nG28 X Y; Home extruder axis X Y\nM117 Start Warm Up\nM140 S{material_bed_temperature} ;start heating the bed to what is set in Cura\nM104 S130 ;start heating E to 130 for preheat\nM190 S{material_bed_temperature} ;Wait for Bed Temperature\nM117 Levling the build plate\nG29\nG1 Z1.0 F3000 ;Move Z Axis up to 1mm\nG1 X0.5 Y1 ;Move hotend to starting position\nM117 Heating Hotend\nM104 S{material_initial_print_temperature} T0 ;start heating T0 to what is set in Cura\nM109 S{material_initial_print_temperature} T0 ;Wait for Hotend Temperature\nG92 E0 ;Reset Extruder\nM117 Purging and cleaning nozzle\nG1 X1.1 Y10 Z0.28 F1000.0 ;Move to start position\nG1 X1.1 Y90.0 Z0.28 F2000.0 E15 ;Draw the first line\nG1 X1.4 Y90.0 Z0.23 F5000.0 ;Move to side a little\nG1 X1.4 Y10 Z0.20 F2000.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X1 Y5 Z0.2 F5000.0 ;Move over to prevent blob squish\nM117 Printing..." }, + "machine_width": { "default_value": 100 }, + "retraction_amount": { "default_value": 3 }, + "speed_infill": { "value": 40.0 }, + "speed_print_layer_0": { "value": 22.0 }, + "speed_roofing": { "value": 25.0 }, + "speed_support_bottom": { "dvalue": 30.0 }, + "speed_support_infill": { "value": 45.0 }, + "speed_support_roof": { "value": 30.0 }, + "speed_topbottom": { "value": 30.0 }, + "speed_travel_layer_0": { "value": 60 }, + "speed_wall_0": { "value": 20.0 }, + "speed_wall_x": { "value": 25.0 } + } +} \ No newline at end of file diff --git a/resources/extruders/weedo_base_extruder_0.def.json b/resources/extruders/weedo_base_extruder_0.def.json index 0cb088acdd..82cf9d9541 100644 --- a/resources/extruders/weedo_base_extruder_0.def.json +++ b/resources/extruders/weedo_base_extruder_0.def.json @@ -2,14 +2,15 @@ "version": 2, "name": "Extruder 1", "inherits": "fdmextruder", - "metadata": { + "metadata": + { "machine": "weedo_base", "position": "0" }, - - "overrides": { + "overrides": + { "extruder_nr": { "default_value": 0 }, "machine_nozzle_size": { "default_value": 0.4 }, "material_diameter": { "default_value": 1.75 } } -} +} \ No newline at end of file