diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg
index b50a51e49f..27706f6f9c 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg
@@ -21,4 +21,3 @@ skin_overlap = 20
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
 support_brim_enable = True
 support_interface_enable = True
-support_use_towers = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg
index a64ef6cf73..5ab30fee5e 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg
@@ -22,4 +22,3 @@ skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
 support_brim_enable = True
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_enable = True
-support_use_towers = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg
index 0301fbdde7..e310cdaa18 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg
@@ -20,4 +20,3 @@ skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
 support_brim_enable = True
 support_infill_sparse_thickness = =3 * layer_height
 support_interface_enable = True
-support_use_towers = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg
index 916c08e706..8a3345da06 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg
@@ -20,4 +20,3 @@ skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
 support_brim_enable = True
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_enable = True
-support_use_towers = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
index 2c9796d3df..145f413e19 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
@@ -20,4 +20,3 @@ skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_enable = True
-support_use_towers = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg
index a7abea7ede..01e60a35f7 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg
@@ -19,4 +19,3 @@ retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
 support_brim_enable = True
 support_interface_enable = True
-support_use_towers = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
index bb9e2934ab..b15b65887f 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
@@ -18,4 +18,3 @@ retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
 support_brim_enable = True
 support_interface_enable = True
-support_use_towers = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
index bd02771fab..1dc61238ce 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -19,4 +19,3 @@ skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_enable = True
-support_use_towers = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
index b6dda574b3..69938037fa 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
@@ -21,4 +21,3 @@ skin_overlap = 20
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
 support_brim_enable = True
 support_interface_enable = True
-support_use_towers = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
index ebdf69e1aa..e72202ffde 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
@@ -22,4 +22,3 @@ skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
 support_brim_enable = True
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_enable = True
-support_use_towers = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
index 71c60fb9f9..96e9f31add 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
@@ -20,4 +20,3 @@ skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
 support_brim_enable = True
 support_infill_sparse_thickness = =3 * layer_height
 support_interface_enable = True
-support_use_towers = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
index 9e840ced4b..f7083b1066 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
@@ -20,4 +20,3 @@ skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
 support_brim_enable = True
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_enable = True
-support_use_towers = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
index b3aee29488..1c0f337142 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
@@ -21,4 +21,3 @@ skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_enable = True
-support_use_towers = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
index 947f62cd98..16aed0a4cd 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
@@ -19,4 +19,3 @@ retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
 support_brim_enable = True
 support_interface_enable = True
-support_use_towers = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
index 9a530565fc..eff18978d1 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
@@ -18,4 +18,3 @@ retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
 support_brim_enable = True
 support_interface_enable = True
-support_use_towers = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
index fe46635fa6..8070aeb7f8 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -19,4 +19,3 @@ skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_enable = True
-support_use_towers = True