delete unused definitions

resources/definitions/anet3d_et5 s.def.json

@@ -1,64 +0,0 @@
-{
-    "version": 2,
-    "name": "Anet ET5 S",
-    "inherits": "anet3d",
-    "metadata": {
-        "visible": true,        
-        "machine_extruder_trains":
-        {
-            "0": "anet3d_extruder_left",
-            "1": "anet3d_extruder_right"
-        }
-    },
-
-    "overrides": {
-        "machine_name": { "default_value": "Anet ET5 S" },
-        "machine_width": {
-            "default_value": 300
-        },
-        "machine_depth": {
-            "default_value": 300
-        },
-        "machine_height": {
-            "default_value": 400
-        },
-        
-        "raft_airgap": { "value": "0.15" },
-        "layer_height": { "value": "0.15" },
-        "gantry_height": { "value": "0." },
-        "cool_min_layer_time": { "value": "3" },
-        "support_bottom_distance": { "value": "0.0" },
-        "adhesion_extruder_nr": { "value": "1.0" },
-        "brim_line_count": { "value": "13.0" },
-        "top_layers": { "value": "6" },
-        "bottom_layers": { "value": "6" },
-        
-        "prime_tower_enable": { "value": true },
-        "prime_tower_position_x": { "value": "270" },
-        "prime_tower_position_y": { "value": "220" },
-        "prime_tower_size": { "value": "30" },
-        
-        "initial_extruder_nr": { "value": "1" },
-        "initial_bottom_layers": { "value": "6" },        
-        
-        "acceleration_support_bottom": { "value": "1000" },
-        "acceleration_support_roof": { "value": "1000" },
-        
-        "z_seam_y": { "value": "300" },
-        "z_seam_x": { "value": "150" },
-        
-        "layer_0_z_overlap": { "value": "0.075" },
-        
-        "infill_sparse_thickness": { "value": "0.15" },
-        "infill_line_distance": { "value": "16.0" },
-        "cross_infill_pocket_size": { "value": "16.0" },
-        "support_infill_sparse_thickness": { "value": "0.15" },
-                        
-				"machine_start_gcode": {
-            "default_value": "G28 ;Home\nG1 Z15.0 F2000 ;Move the platform\n\n"
-        },
-        "machine_end_gcode": {
-            "default_value": "M104 S0\nM140 S0\nG92 E80\nG1 E-80 F2000\nG28 X0 Y0\nM84"
-        }        
-    }
-}

resources/extruders/anet3d_extruder_right.def.json

@@ -8,7 +8,7 @@
     },
 
     "overrides": {
-        "extruder_nr": { "default_value": 0 },
+        "extruder_nr": { "default_value": 1 },
         "machine_nozzle_size": { "default_value": 0.4 },
         "material_diameter": { "default_value": 1.75 },
         "machine_extruder_start_code": {