Merge branch 'main' into PP-108_Large_speed_up_in_PVA_support_printing

# Conflicts:
#	resources/definitions/ultimaker.def.json

cura/Machines/Models/IntentCategoryModel.py

@@ -111,7 +111,7 @@ class IntentCategoryModel(ListModel):
             except ValueError:
                 weight = 99
             result.append({
-                "name": IntentCategoryModel.translation(category, "name", category),
+                "name": IntentCategoryModel.translation(category, "name", category.title()),
                 "description": IntentCategoryModel.translation(category, "description", None),
                 "intent_category": category,
                 "weight": weight,

cura/Machines/Models/QualityManagementModel.py

@@ -358,8 +358,9 @@ class QualityManagementModel(ListModel):
                 "quality_type": quality_type,
                 "quality_changes_group": None,
                 "intent_category": intent_category,
-                "section_name": catalog.i18nc("@label", intent_translations.get(intent_category, {}).get("name", catalog.i18nc("@label", "Unknown"))),
+                "section_name": catalog.i18nc("@label", intent_translations.get(intent_category, {}).get("name", catalog.i18nc("@label", intent_category.title()))),
             })
+
         # Sort by quality_type for each intent category
         intent_translations_list = list(intent_translations)
 

cura/Settings/MachineManager.py

@@ -1611,7 +1611,7 @@ class MachineManager(QObject):
         if intent_category != "default":
             intent_display_name = IntentCategoryModel.translation(intent_category,
                                                                   "name",
-                                                                  catalog.i18nc("@label", "Unknown"))
+                                                                  intent_category.title())
             display_name = "{intent_name} - {the_rest}".format(intent_name = intent_display_name,
                                                                the_rest = display_name)
 

resources/definitions/SV02.def.json

@@ -44,7 +44,6 @@
         "machine_max_jerk_xy": { "value": 8 },
         "machine_max_jerk_z": { "value": 0.4 },
         "machine_max_jerk_e": { "value": 5 },
-        "machine_heated_bed": { "default_value": true },
         "material_diameter": { "default_value": 1.75 },
         "infill_overlap": { "default_value": 15	},
         "acceleration_print": { "value": 500 },

resources/definitions/fdmprinter.def.json

@@ -2256,7 +2256,7 @@
                     "maximum_value": "machine_height",
                     "maximum_value_warning": "resolveOrValue('infill_sparse_thickness') * 10",
                     "type": "float",
-                    "value": "0 if infill_sparse_density > 0 else 0",
+                    "value": "0",
                     "limit_to_extruder": "infill_extruder_nr",
                     "enabled": "infill_sparse_density > 0",
                     "settable_per_mesh": true,

resources/definitions/ultimaker.def.json

@@ -50,23 +50,29 @@
         "wall_thickness": {
             "value": "wall_line_width_0 + wall_line_width_x"
         },
-        "infill_before_walls": {
-            "value": "False"
-        },
         "infill_material_flow": {
             "value": "(1.95-infill_sparse_density / 100 if infill_sparse_density > 95 else 1) * material_flow"
         },
         "retraction_combing": {
             "value": "'no_outer_surfaces'"
         },
+        "retraction_count_max": {
+            "value": 25
+        },
+        "retraction_extrusion_window": {
+            "value": 1
+        },
         "roofing_layer_count": {
-            "value": "0"
+            "value": "1"
         },
         "roofing_material_flow": {
             "value": "material_flow"
         },
         "skin_material_flow": {
-            "value": "0.97 * material_flow"
+            "value": "0.95 * material_flow"
+        },
+        "support_interface_material_flow": {
+            "value": "skin_material_flow"
         },
         "skin_monotonic" : {
             "value": true
@@ -89,12 +95,21 @@
         "meshfix_maximum_deviation": {
             "value": "machine_nozzle_size / 10"
         },
+        "jerk_travel_enabled": {
+            "value": false
+        },
+        "acceleration_travel_enabled": {
+            "value": false
+        },
         "jerk_travel": {
             "value": "jerk_print"
         },
         "acceleration_travel": {
             "value": "acceleration_wall"
         },
+        "skin_edge_support_thickness": {
+            "value": "4 * layer_height if infill_sparse_density < 30 else 0"
+        },
         "bridge_settings_enabled": {
             "value": false
         },
@@ -155,7 +170,53 @@
         "bridge_fan_speed_3": {
              "value": "cool_fan_speed_min"
         },
-
+        "jerk_print": {
+            "value": "20",
+            "minimum_value_warning": 20
+        },
+        "jerk_infill": {
+            "minimum_value_warning": 20
+        },
+        "jerk_wall": {
+            "minimum_value_warning": 20
+        },
+        "jerk_wall_0": {
+            "minimum_value_warning": 20
+        },
+        "jerk_roofing": {
+            "minimum_value_warning": 20
+        },
+        "jerk_topbottom": {
+            "minimum_value_warning": 20
+        },
+        "jerk_support": {
+            "minimum_value_warning": 20
+        },
+        "jerk_support_infill": {
+            "minimum_value_warning": 20
+        },
+        "jerk_support_interface": {
+            "minimum_value_warning": 20
+        },
+        "jerk_prime_tower": {
+            "minimum_value_warning": 20
+        },
+        "jerk_layer_0": {
+            "minimum_value_warning": 20
+        },
+        "jerk_print_layer_0": {
+            "minimum_value_warning": 20
+        },
+        "jerk_travel": {
+            "value": "jerk_print",
+            "minimum_value_warning": 20
+        },
+        "jerk_travel_layer_0": {
+            "minimum_value_warning": 20
+        },
+        "jerk_skirt_brim": {
+            "minimum_value_warning": 20
+        }
         "support_wall_count": {
             "value": 0
         },

resources/definitions/ultimaker3.def.json

@@ -101,20 +101,6 @@
         "infill_wipe_dist": { "value": "0" },
         "initial_layer_line_width_factor": { "value": "120" },
         "jerk_enabled": { "value": "True" },
-        "jerk_print": { "value": "20", "minimum_value_warning": 20 },
-        "jerk_infill": {"minimum_value_warning": 20 },
-        "jerk_wall": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_wall_0": { "value": "jerk_wall", "minimum_value_warning": 20 },
-        "jerk_roofing": {"minimum_value_warning": 20 },
-        "jerk_topbottom": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support_infill": {"minimum_value_warning": 20 },
-        "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
-        "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
-        "jerk_print_layer_0": {"minimum_value_warning": 20 },
-        "jerk_travel_layer_0": {"minimum_value_warning": 20 },
-        "jerk_skirt_brim": {"minimum_value_warning": 20 },
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
@@ -136,8 +122,6 @@
         "raft_margin": { "value": "10" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },
-        "retraction_count_max": { "value": "10" },
-        "retraction_extrusion_window": { "value": "1" },
         "retraction_hop": { "value": "2" },
         "retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },
         "retraction_hop_only_when_collides": { "value": "True" },

resources/definitions/ultimaker_s3.def.json

@@ -93,20 +93,6 @@
         "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
         "infill_wipe_dist": { "value": "0" },
         "jerk_enabled": { "value": "True" },
-        "jerk_print": { "value": "20", "minimum_value_warning": 20 },
-        "jerk_infill": {"minimum_value_warning": 20 },
-        "jerk_wall": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_wall_0": { "value": "jerk_wall", "minimum_value_warning": 20 },
-        "jerk_roofing": {"minimum_value_warning": 20 },
-        "jerk_topbottom": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support_infill": {"minimum_value_warning": 20 },
-        "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
-        "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
-        "jerk_print_layer_0": {"minimum_value_warning": 20 },
-        "jerk_travel_layer_0": {"minimum_value_warning": 20 },
-        "jerk_skirt_brim": {"minimum_value_warning": 20 },
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
@@ -128,8 +114,6 @@
         "raft_speed": { "value": "25" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },
-        "retraction_count_max": { "value": "10" },
-        "retraction_extrusion_window": { "value": "1" },
         "retraction_hop": { "value": "2" },
         "retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },
         "retraction_hop_only_when_collides": { "value": "True" },
@@ -155,7 +139,6 @@
         "switch_extruder_prime_speed": { "value": "15" },
         "switch_extruder_retraction_amount": { "value": "8" },
         "top_bottom_thickness": { "value": "1" },
-        "travel_avoid_supports": { "value": "True" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
         "wall_0_inset": { "value": "0" },
         "initial_layer_line_width_factor": { "value": "120" },

resources/definitions/ultimaker_s5.def.json

@@ -95,20 +95,6 @@
         "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
         "infill_wipe_dist": { "value": "0" },
         "jerk_enabled": { "value": "True" },
-        "jerk_print": { "value": "20", "minimum_value_warning": 20 },
-        "jerk_infill": {"minimum_value_warning": 20 },
-        "jerk_wall": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_wall_0": { "value": "jerk_wall", "minimum_value_warning": 20 },
-        "jerk_roofing": {"minimum_value_warning": 20 },
-        "jerk_topbottom": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support_infill": {"minimum_value_warning": 20 },
-        "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
-        "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
-        "jerk_print_layer_0": {"minimum_value_warning": 20 },
-        "jerk_travel_layer_0": {"minimum_value_warning": 20 },
-        "jerk_skirt_brim": {"minimum_value_warning": 20 },
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
@@ -130,8 +116,6 @@
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },
         "retraction_combing": { "value": "'no_outer_surfaces'"},
-        "retraction_count_max": { "value": "10" },
-        "retraction_extrusion_window": { "value": "1" },
         "retraction_hop": { "value": "2" },
         "retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },
         "retraction_hop_only_when_collides": { "value": "True" },
@@ -157,7 +141,6 @@
         "switch_extruder_prime_speed": { "value": "15" },
         "switch_extruder_retraction_amount": { "value": "8" },
         "top_bottom_thickness": { "value": "1" },
-        "travel_avoid_supports": { "value": "True" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
         "wall_0_inset": { "value": "0" },
         "optimize_wall_printing_order": { "value": "True" },

resources/definitions/uni_base.def.json

@@ -138,7 +138,6 @@
         "machine_height":                    {"default_value": 250},
         "machine_extruder_count":            {"value": 2}, 
         "machine_buildplate_type":           {"value": "glass"},
-        "machine_heated_bed":                {"default_value": true},
         "machine_center_is_zero":            {"default_value": false},
         "machine_gcode_flavor":              {"default_value": "RepRap (Marlin/Sprinter)"},
         "machine_head_with_fans_polygon":    {"default_value": [

resources/definitions/zav_base.def.json

@@ -147,7 +147,6 @@
         "machine_height":                    {"default_value": 270},
         "machine_extruder_count":            {"value": 1}, 
         "machine_buildplate_type":           {"value": "glass"},
-        "machine_heated_bed":                {"default_value": true},
         "machine_center_is_zero":            {"default_value": false},
         "machine_gcode_flavor":              {"default_value": "RepRap (Marlin/Sprinter)"},
         "machine_head_with_fans_polygon":    {"default_value": [

resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg

@@ -22,11 +22,6 @@ top_bottom_thickness = 0.8
 infill_sparse_density = 15
 
 jerk_print = 30
-jerk_infill = =jerk_print
+
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 

resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg

@@ -16,12 +16,6 @@ is_experimental = True
 infill_sparse_density = 10
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 acceleration_print = 4000
 acceleration_wall = 2000

resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg

@@ -22,11 +22,6 @@ top_bottom_thickness = 0.8
 infill_sparse_density = 15
 
 jerk_print = 30
-jerk_infill = =jerk_print
+
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 

resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg

@@ -22,11 +22,6 @@ top_bottom_thickness = 0.8
 infill_sparse_density = 15
 
 jerk_print = 30
-jerk_infill = =jerk_print
+
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg

@@ -16,12 +16,6 @@ is_experimental = True
 infill_sparse_density = 10
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 acceleration_print = 4000
 acceleration_wall = 2000

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg

@@ -22,11 +22,6 @@ top_bottom_thickness = 0.8
 infill_sparse_density = 15
 
 jerk_print = 30
-jerk_infill = =jerk_print
+
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg

@@ -14,12 +14,6 @@ variant = AA 0.4
 [values]
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 speed_print = 30
 speed_infill = =speed_print

resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg

@@ -16,12 +16,6 @@ is_experimental = True
 infill_sparse_density = 10
 
 jerk_print = 30
-jerk_infill = =jerk_print
-jerk_topbottom = =jerk_print
-jerk_wall = =jerk_print
-jerk_wall_0 = =jerk_wall
-jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 
 acceleration_print = 4000
 acceleration_wall = 2000

resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg

@@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
+retraction_count_max = 15
-retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True

resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg

@@ -29,18 +29,8 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
+retraction_count_max = 15
-retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True

resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg

@@ -29,18 +29,8 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
+retraction_count_max = 15
-retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True

resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg

@@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
+retraction_count_max = 15
-retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True

resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg

@@ -29,18 +29,8 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
+retraction_count_max = 15
-retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True

resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg

@@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
+retraction_count_max = 15
-retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True

resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg

@@ -25,6 +25,7 @@ raft_base_line_spacing = 1
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.2
 raft_surface_line_width = 0.2
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40

resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg

@@ -23,6 +23,7 @@ raft_base_line_spacing = 2
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_margin = 12
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40

resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg

@@ -26,6 +26,7 @@ raft_interface_line_spacing = 1.2
 raft_interface_line_width = 0.57
 raft_margin = 15
 raft_surface_line_width = 0.5
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg

@@ -29,18 +29,8 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
+retraction_count_max = 15
-retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg

@@ -29,18 +29,8 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
+retraction_count_max = 15
-retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg

@@ -29,18 +29,8 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
+retraction_count_max = 15
-retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg

@@ -29,18 +29,8 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
+retraction_count_max = 15
-retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg

@@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
+retraction_count_max = 15
-retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True

resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg

@@ -29,18 +29,8 @@ cool_min_speed = 20
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0
-jerk_enabled = True
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
+retraction_count_max = 15
-retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True

resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg

@@ -25,6 +25,7 @@ raft_base_line_spacing = 1
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.2
 raft_surface_line_width = 0.2
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40

resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg

@@ -23,6 +23,7 @@ raft_base_line_spacing = 2
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_margin = 12
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40

resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg

@@ -26,6 +26,7 @@ raft_interface_line_spacing = 1.2
 raft_interface_line_width = 0.57
 raft_margin = 15
 raft_surface_line_width = 0.5
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45

resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg

@@ -12,7 +12,6 @@ material = generic_cpe
 variant = AA 0.25
 
 [values]
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8

resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg

@@ -21,7 +21,6 @@ cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 5
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 multiple_mesh_overlap = 0
@@ -30,7 +29,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8

resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg

@@ -12,7 +12,6 @@ material = generic_petg
 variant = AA 0.25
 
 [values]
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8

resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg

@@ -31,9 +31,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 45
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.2
-retraction_extrusion_window = 6.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8

resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg

@@ -17,7 +17,6 @@ cool_min_speed = 5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.2
 machine_min_cool_heat_time_window = 15
@@ -29,7 +28,6 @@ material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True

resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg

@@ -17,7 +17,6 @@ cool_min_speed = 6
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.15
 machine_min_cool_heat_time_window = 15
@@ -29,7 +28,6 @@ material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True

resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg

@@ -17,7 +17,6 @@ cool_min_speed = 5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.06
 machine_min_cool_heat_time_window = 15
@@ -31,7 +30,6 @@ material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True

resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg

@@ -17,7 +17,6 @@ cool_min_speed = 7
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
@@ -30,7 +29,6 @@ material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True

resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg

@@ -23,7 +23,6 @@ infill_overlap = 0
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.2
 machine_min_cool_heat_time_window = 15
@@ -39,8 +38,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8

resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg

@@ -21,7 +21,6 @@ cool_min_speed = 7
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.15
 machine_min_cool_heat_time_window = 15
@@ -37,8 +36,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8

resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg

@@ -23,7 +23,6 @@ infill_overlap = 0
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.06
 machine_min_cool_heat_time_window = 15
@@ -39,8 +38,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8

resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg

@@ -22,7 +22,6 @@ cool_min_speed = 5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
@@ -36,8 +35,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8

resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg

@@ -38,9 +38,8 @@ prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
 retraction_amount = 6.5
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8

resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg

@@ -37,9 +37,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8

resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg

@@ -21,7 +21,6 @@ cool_min_speed = 2.5
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
@@ -36,9 +35,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8

resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg

@@ -16,7 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
 jerk_print = 25
-jerk_roofing = 1
 layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6

resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg

@@ -22,7 +22,6 @@ infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.2
 machine_min_cool_heat_time_window = 15
@@ -36,9 +35,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 1.5
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2

resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg

@@ -22,7 +22,6 @@ infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 layer_height = 0.15
 machine_min_cool_heat_time_window = 15
@@ -37,9 +36,8 @@ material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_amount = 7
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 1.5
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2

resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg

@@ -22,7 +22,6 @@ infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d'
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
-jerk_enabled = True
 jerk_print = 25
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
@@ -34,9 +33,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 17
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 1.5
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2

resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg

@@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 10
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5

resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg

@@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 20
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5

resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg

@@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 15
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5

resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg

@@ -30,7 +30,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False

resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg

@@ -31,7 +31,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False

resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg

@@ -30,7 +30,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False

resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg

@@ -16,5 +16,6 @@ brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 skin_overlap = 20
 support_brim_enable = True

resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg

@@ -16,6 +16,7 @@ brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 skin_overlap = 15
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3

resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg

@@ -15,5 +15,6 @@ variant = BB 0.4
 brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.18

resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg

@@ -15,4 +15,5 @@ variant = BB 0.4
 brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 support_brim_enable = True

resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg

@@ -15,4 +15,5 @@ variant = BB 0.8
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True

resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg

@@ -15,5 +15,6 @@ variant = BB 0.8
 brim_replaces_support = False
 layer_height = 0.4
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_interface_height = 0.9

resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg

@@ -15,6 +15,7 @@ variant = BB 0.8
 brim_replaces_support = False
 layer_height = 0.3
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_height = 1.2

resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg

@@ -13,7 +13,6 @@ variant = AA 0.25
 
 [values]
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8

resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg

@@ -30,7 +30,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8

resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg

@@ -13,7 +13,6 @@ variant = AA 0.25
 
 [values]
 retraction_combing_max_distance = 8
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8