From db800551aa11481b35d2070507e6cec56aa35d94 Mon Sep 17 00:00:00 2001 From: MariMakes <40423138+MariMakes@users.noreply.github.com> Date: Tue, 7 Feb 2023 15:40:13 +0100 Subject: [PATCH] CURA-10252_Update-changelog-5.3 Update Changelog for Cura 5.3 --- resources/texts/change_log.txt | 115 +++++++++++++++++++++++++++++++++ 1 file changed, 115 insertions(+) diff --git a/resources/texts/change_log.txt b/resources/texts/change_log.txt index e47ebd18a2..920ca0b43d 100644 --- a/resources/texts/change_log.txt +++ b/resources/texts/change_log.txt @@ -1,3 +1,118 @@ +[5.3] +* Interlocking Structure Generation +- This new setting enables you to interlock multiple materials together, even if those materials are not compatible, contributed by BagelOrb + +* Brim per Material +- A brim can now be printed with multiple materials in the same model, contributed by BagelOrb + +* Updated Recommended Print Settings Menu +- The number of settings available in the recommended have expanded. The redesign will make is easier to use intent profiles or save new custom profiles. + +* Other new features and improvements: +- Improved the Zseam behavior so Hide Seam is generated less randomly. +- Fixed the order in which concentric top/bottom patterns are printed. +- Replaced mentions of Ultimaker by UltiMaker to correctly reflect the merger +- Updated Load Project window with a new design. +- Added tooling to automatically generate translation files to reduce the chance of human error. +- Added quality type to slice meta-data so it can be displayed in the Ultimaker Digital Factory. +- Added a new way to update profiles by adding a Save/Compare Settings Button in custom window. +- Improved onboarding so t easier to add your first cloud printer or a non-UltiMaker printer. +- Improved support generation so the support doesn't fold around the model. +- Adjusted Support Horizontal Expansion and Minimum Support Area Settings for UltiMaker printers to improve support reliability. +- Added a Minimum Layer Time Temperature setting. +- Added Brim Inside Avoid Margin setting, contributed by BagelOrb +- Added settings for Support Interface Wall Line Count, Support Roof Line Count, and Support Floor Line Count. +- Reduced stringing for Lift Head setting by removing the move in XY. +- Added prefix 'Printing' to post processing plugin script "DisplayFilenameAndLayerOnLCD" contributed by brunohenriquy +- Added Enable, G-code Before and G-code After To Filament Change, contributed by victornpb +- Added support for per-object retraction settings, contributed by jeremysalwen +- Updated PauseAtHeight so M18 becomes M84 when disarming, contributed by Cycov +- Added an option to keep stepper motors engaged to Pause At Height, contributed by Cycov +- Added an option to Beep at Pause to Pause At Height, contributed by Cycov +- Added Additional Gcode Fields to Pause At Height, contributed by Cycov +- Make Layer Number the default in Pause At Height, contributed by discip +- Added more information when rotating a model using the arrows, contributed by Fabbro03 +- Added the "CTRL +" shortcut to open Preferences window, contributed by Ladnessness +- Added the option to add Machine Action buttons in the Printer Preferences, contributed by julianCast + +* Bug fixes: +- Fixed a slicing crash if they were placed in the center of the buildplate. +- Fixed a slicing crash that would happen if Adaptive Layers Maximum Variation had a negative value. +- Fixed a bug where an "object of type SettingFunction is not JSON serializable" error would prevent users from using certain plug-ins. +- Fixed a bug where hole expansion would affect interlocking holes. +- Fixed a bug where fuzzy skin would also apply to interlocking structures. +- Fixed a bug where Relative Extrusion was not calculated correctly when using Retract Continue. +- Fixed a bug that would prevent advanced users from slicing a batch with multiple STLs in a script. +- Fixed a bug where skirt lines would not follow the convex contours of models. +- Fixed a bug where Exclusing Slicing Tolerance was not applied correctly to bottom-layer(s). +- Fixed a bug where small travels were not retracted correctly. +- Fixed a bug where the printjob time showed 0 minutes if adaptive layer height was enabled. +- Fixed a bug with Skin Overlap where the skin would overlap with the roofing. +- Fixed a bug where Support Interface would be generated on top of support. +- Fixed a bug where the Floor Support Interface would not be generated in certain models. +- Fixed a bug where a long material list would disappear out of the screen. +- Fixed a bug where support is not generated correctly if Support Pattern is Concentric. +- Fixed a bug where an increased Skin Removal Width would cut of part of the skin area. +- Fixed a bug where Support Towers would be generated but would support nothing. +- Fixed a bug where Small Feature Size would also be applied to inner-wall loops. +- Fixed a bug where adhesion would be printed outside of the buildplate, contributed by BagelOrb +- Fixed a bug where a primetower brim was printed when it shouldn't, contributed by BagelOrb +- Fixed a bug where Ooze/Draft shields did not avoid prime tower, contributed by BagelOrb +- Fixed a bug where not all Mac users could not use USB printing, contributed by Sovenger +- Fixed input value for platform offset when adding a logo, contributed by drewdoggy +- Fixed a bug where the travel move at the end of a layer unretracts, contributed by richfelker +- Fixed a bug where WallToolPaths are not simplified, contributed by Piezoid +- Fixed a bug where iterators were moving out of range, contributed by Piezoid and plaintoothpaste +- Fixed a bug where the Maximum Area Deviation value would too small, contributed by Piezoid +- Fixed a bug where an airgap was present in Spiralized Outer Contour, contributed by richfelker +- Fixed a bug where speeds defined for slower layers would impact speeds accelerations and jerks for the whole print, contributed by richfelker +- Fixed a bug where materials with longer names in Materials Preferences were harder to read, contributed by Ghostkeeper + +* Printer definitions, profiles and materials: +- Updated intent and quality files for UltiMaker printers to have more consistent file names. +- Updated default Support Interface Pattern to ZigZag for UltiMaker printers +- Updated Maximum Combing Distance for UltiMaker printers +- Updated UltiMaker ABS Silver Metallic to the correct UltiMaker ABS Silver +- Updated AnkerMake M5 definitions, contributed by just-trey +- Updated Anycubic i3 Mega S/Pro profile, contributed by NilsRo +- Updated Creality Ender CR10 start GCode, contributed by InstantMuffin +- Updated Creality Sermoon V1 profiles to include hotend specifics, contributed by Iggomez +- Updated Geetech A10M, A10, A20, A20M, A20T, A30M, MizarS, contributed by whoseyoung +- Updated PPGF30 temperature from 235 to 240, introduced by heed818 +- Updated Rigid3D machine definitions, contributed by mehmetsutas +- Updated Sovol SV01, SV02, and SV03, contributed by eropple +- Updated Sovol's SV01 and SV02 bed dimensions, contributed by eropple +- Added AnkerMake M5, contributed by just-trey +- Added Anycubic Kobra Go, contributed by Razzeee +- Added Artillery Hornet, contributed by wilds +- Added Biqu Hurakan, contributed by looxonline +- Added Blocks ONE MKII, Blocks One, Blocks Pro S100, Blocks Pro S30, Blocks R21, Blocks RD50, and Blocks Zero, contributed by jgrilo-blocks +- Added Creality CR-10 Smart, contributed by eropple +- Added Creality Ender-3 S1 Plus, and Ender-3 S1 Pro, contributed by izilzty +- Added Creality Sermoon V1, and Sermoon V1 Pro, contributed by Iggomez +- Added Dagoma Sigma, and updated Dagome Pro430, contributed by 0r31 +- Added Elegoo Neptune 1, Neptune 2s, Neptune 3, Neptune 3 Max, Neptune 3 Plus, Neptune 3 Pro, and Neptune X, contributed by NARUTOfzr +- Added FablabBcn PastePrinter, contributed by EDUARDOCHAMORRO +- Added Flsun V400, contributed by dengdaitianhei +- Added Fusion3 F410, contributed by 64bittuning +- Added Geetech A10Pro, A30Pro, A30T, E180, GiantArmD200, I3ProB, i3ProC, I3PrW, MeCreator, MeCreator2, MeDucer, Mizar, MizarM, MizarMax, MizarMax, MizarPro, and Thunder, contributed by whoseyoung +- Added Klema 180, Klema 250, Klema 250 Pro, Klema 250 Twin, and Klema 500, contributed by polyntsev +- Added Modix V3 BIG-120X, Modix V3 BIG-120Z, Modix V3 BIG-180X, Modix V3 BIG-40, Modix V3 BIG-60, and Modix V3 BIG-Meter, contributed by Modix3D +- Added SnakeOil Standard 180, and SnakeOil Standard 250, contributed by ChipCE +- Added Sovol SV01PRO, SV05, and SV06, contributed by eropple +- Added UMO+ DXU, contributed by ansonl +- Added Voron Trident 250, Trident 300, and Trident 350, contributed by RagingRoosevelt + +* Community translations: +- Updated French translations, contributed by xommit + +* Known critical issues: +- Under certain angles the Interlocking Structures are not effective, yet. +- The Gcode Reader Plug-in is broken since Cura 5.2 and will not load gcodes correctly. +- Some models have been slicing slower since Cura 5.1. +- Multiple external monitors on Windows (especially if from the same brand) might be a problem under some circumstances. +- Does Cura (not) work on your OS (version)? See this article for clarification. + [5.2.2] * Introducing the UltiMaker S7