From dbbf8d138a5e640b6cbddb19d0be37509adebc21 Mon Sep 17 00:00:00 2001
From: WalshJames <36920227+WalshJames@users.noreply.github.com>
Date: Tue, 22 Oct 2019 15:00:45 +0200
Subject: [PATCH] Delete Leapfrog_Bolt_Pro_abs_natural_standard.inst.cfg

---
 ...rog_Bolt_Pro_abs_natural_standard.inst.cfg | 119 ------------------
 1 file changed, 119 deletions(-)
 delete mode 100644 Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_abs_natural_standard.inst.cfg

diff --git a/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_abs_natural_standard.inst.cfg b/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_abs_natural_standard.inst.cfg
deleted file mode 100644
index 1e8596d84b..0000000000
--- a/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_abs_natural_standard.inst.cfg
+++ /dev/null
@@ -1,119 +0,0 @@
-[general]
-version = 4
-name = Standard
-definition = leapfrog_bolt_pro
-
-[metadata]
-setting_version = 9
-type = quality
-quality_type = standard
-weight = 1
-material = leapfrog_abs_natural
-
-[values]
-layer_height_0 = 0.3
-line_width = 0.4
-initial_layer_line_width_factor = 120
-
-
-wall_thickness = 0.8
-wall_0_wipe_dist = 0.2
-top_bottom_thickness = 0.8
-top_bottom_pattern = lines
-optimize_wall_printing_order = True
-travel_compensate_overlapping_walls_enabled = True
-travel_compensate_overlapping_walls_0_enabled = True
-travel_compensate_overlapping_walls_x_enabled = True
-fill_perimeter_gaps = everywhere
-filter_out_tiny_gaps = True
-z_seam_type = sharpest_corner
-z_seam_corner = hide_seam
-skin_outline_count = 1
-
-
-
-
-infill_sparse_density = 20
-infill_pattern = grid
-connect_infill_polygons = True
-infill_overlap = 0
-infill_wipe_dist = 0
-infill_before_walls = True
-min_infill_area = 0
-
-
-retraction_enable = True
-retract_at_layer_change = False
-retraction_amount = 2
-retraction_speed = 25
-switch_extruder_retraction_amount = 15
-switch_extruder_retraction_speeds = 20
-
-
-
-speed_print = 35
-speed_wall = 25
-speed_wall_0 = 25
-speed_wall_x = 35
-speed_topbottom = 25	
-speed_travel = 200
-speed_layer_0 = 25
-speed_support = 40
-speed_travel_layer_0 = 45
-speed_slowdown_layers = 1
-speed_equalize_flow_enabled = True
-speed_equalize_flow_max = 150
-
-								
-
-retraction_combing = all
-travel_avoid_other_parts = True
-travel_avoid_supports = True
-retraction_hop_enabled = True
-retraction_hop_only_when_collides = True
-retraction_hop = 2
-retraction_hop_after_extruder_switch = True
-retraction_hop_after_extruder_switch_height = 2
-
-
-cool_fan_enabled = True
-cool_fan_speed = 30
-cool_fan_speed_min = 0
-cool_fan_speed_max = 30
-cool_min_layer_time_fan_speed_max = 5
-cool_fan_speed_0 = 0
-cool_fan_full_at_height = 0.5
-cool_fan_full_layer = 3
-cool_min_layer_time = 5
-cool_min_speed = 10
-
-support_interface_enable = False
-support_angle = 50
-support_pattern = zigzag
-support_connect_zigzags = False
-support_infill_rate = 20
-support_z_distance = 0.3
-support_xy_distance = 0.7
-support_xy_distance_overhang = 0.4
-support_bottom_stair_step_height = 0.3
-support_bottom_stair_step_width = 5
-support_join_distance = 2
-support_tower_diameter = 3
-support_tower_roof_angle = 65
-
-
-
-adhesion_type = brim
-brim_width = 8
-brim_line_count = 14
-brim_outside_only = True
-skirt_brim_minimal_length = 250
-
-
-prime_tower_enable = True
-prime_tower_size = 20
-prime_tower_min_volume = 6
-prime_tower_position_x = 169
-prime_tower_position_y = 25
-prime_tower_wipe_enabled = True
-prime_tower_brim_enable = True