diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_COPA_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_COPA_A.inst.cfg
new file mode 100644
index 0000000000..900a5bb5f4
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_COPA_A.inst.cfg
@@ -0,0 +1,62 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_copa	
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 3
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 35/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/35)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 20/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 20
+cool_fan_speed_max = 80
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 2
+cool_lift_head = True
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 91
+skin_material_flow = 92
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 8
+bridge_wall_material_flow = 50
+bridge_skin_speed = 8
+bridge_skin_material_flow = 60
+bridge_skin_density = 80
+bridge_fan_speed = 80
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_COPA_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_COPA_B.inst.cfg
new file mode 100644
index 0000000000..4bfb463893
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_COPA_B.inst.cfg
@@ -0,0 +1,62 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_copa
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 3
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 37/55)
+speed_wall_0 = =math.ceil(speed_wall * 33/37)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 25/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 20
+cool_fan_speed_max = 80
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 2
+cool_lift_head = True
+support_angle = 60
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 91
+skin_material_flow = 92
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 8
+bridge_wall_material_flow = 50
+bridge_skin_speed = 8
+bridge_skin_material_flow = 60
+bridge_skin_density = 80
+bridge_fan_speed = 80
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_COPA_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_COPA_C.inst.cfg
new file mode 100644
index 0000000000..2db415dd66
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_COPA_C.inst.cfg
@@ -0,0 +1,62 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_copa
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 3
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 40/60)
+speed_wall_0 = =math.ceil(speed_wall * 35/40)
+speed_topbottom = =math.ceil(speed_print * 40/60)
+speed_layer_0 = =math.ceil(speed_print * 30/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 20
+cool_fan_speed_max = 80
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 2
+cool_lift_head = True
+support_angle = 60
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 91
+skin_material_flow = 92
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 8
+bridge_wall_material_flow = 50
+bridge_skin_speed = 8
+bridge_skin_material_flow = 60
+bridge_skin_density = 80
+bridge_fan_speed = 80
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PC_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PC_A.inst.cfg
new file mode 100644
index 0000000000..b8d0f98402
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PC_A.inst.cfg
@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_pc
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 35/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/35)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 20/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 10
+cool_fan_speed_max = 10
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 12
+support_angle = 60
+cool_lift_head = true
+material_print_temperature = 260
+material_print_temperature_layer_0 = 265
+material_flow = 88
+wall_line_count = 3
+retraction_extra_prime_amount = 0.1
+retraction_speed = 30
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+adhesion_type = brim
+
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 12
+bridge_wall_material_flow = 50
+bridge_skin_speed = 12.5
+bridge_skin_material_flow = 100
+bridge_skin_density = 80
+bridge_fan_speed = 100
+
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PC_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PC_B.inst.cfg
new file mode 100644
index 0000000000..3e4910d1c1
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PC_B.inst.cfg
@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_pc
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 37/55)
+speed_wall_0 = =math.ceil(speed_wall * 33/37)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 25/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 10
+cool_fan_speed_max = 10
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 12
+cool_lift_head = true
+support_angle = 60
+material_print_temperature = 270
+material_print_temperature_layer_0 = 275
+material_flow = 88
+wall_line_count = 3
+retraction_speed = 30
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+
+adhesion_type = brim
+
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 12
+bridge_wall_material_flow = 50
+bridge_skin_speed = 12.5
+bridge_skin_material_flow = 100
+bridge_skin_density = 80
+bridge_fan_speed = 100
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PC_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PC_C.inst.cfg
new file mode 100644
index 0000000000..1bb060c5e1
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PC_C.inst.cfg
@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_pc
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 40/60)
+speed_wall_0 = =math.ceil(speed_wall * 35/40)
+speed_topbottom = =math.ceil(speed_print * 40/60)
+speed_layer_0 = =math.ceil(speed_print * 30/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 10
+cool_fan_speed_max = 10
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 12
+support_angle = 60
+cool_lift_head = true
+material_print_temperature = 270
+material_print_temperature_layer_0 = 275
+material_flow = 88
+wall_line_count = 3
+retraction_speed = 30
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+
+adhesion_type = brim
+
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 12
+bridge_wall_material_flow = 50
+bridge_skin_speed = 12.5
+bridge_skin_material_flow = 100
+bridge_skin_density = 80
+bridge_fan_speed = 100
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_HT_A.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_HT_A.inst.cfg
new file mode 100644
index 0000000000..8a7f12c822
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_HT_A.inst.cfg
@@ -0,0 +1,55 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_pla_hr_870
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 3
+speed_print = 30
+speed_wall = =math.ceil(speed_print * 35/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/35)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 20/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 4
+support_angle = 65
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 10
+material_initial_print_temperature = =default_material_print_temperature + 5
+material_final_print_temperature = =default_material_print_temperature + 5
+material_flow = 91
+skin_material_flow = 92
+retraction_amount = 2
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
+cool_lift_head = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_HT_B.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_HT_B.inst.cfg
new file mode 100644
index 0000000000..eeb6c0075f
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_HT_B.inst.cfg
@@ -0,0 +1,54 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_pla_hr_870
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 37/55)
+speed_wall_0 = =math.ceil(speed_wall * 33/37)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 25/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 4
+support_angle = 60
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 91
+skin_material_flow = 92
+retraction_amount = 2
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
+cool_lift_head = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_HT_C.inst.cfg b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_HT_C.inst.cfg
new file mode 100644
index 0000000000..847a797968
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.4/s3d_std0.4_PLA_HT_C.inst.cfg
@@ -0,0 +1,54 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_pla_hr_870
+variant = Standard 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 40/60)
+speed_wall_0 = =math.ceil(speed_wall * 35/40)
+speed_topbottom = =math.ceil(speed_print * 40/60)
+speed_layer_0 = =math.ceil(speed_print * 30/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 4
+support_angle = 55
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 91
+skin_material_flow = 92
+retraction_amount = 2
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
+cool_lift_head = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_COPA_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_COPA_B.inst.cfg
new file mode 100644
index 0000000000..45d1d1db3f
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_COPA_B.inst.cfg
@@ -0,0 +1,64 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = b
+weight = 1
+material = emotiontech_copa
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 3
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 37/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/37)
+speed_topbottom = =math.ceil(speed_print * 33/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 20
+cool_fan_speed_max = 80
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 3
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 4
+cool_lift_head = True
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 90
+skin_material_flow = 92
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+retraction_amount = 3
+retraction_speed = 35
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 10
+bridge_wall_material_flow = 50
+bridge_skin_speed = 10
+bridge_skin_material_flow = 60
+bridge_skin_density = 80
+bridge_fan_speed = 80
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_COPA_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_COPA_C.inst.cfg
new file mode 100644
index 0000000000..c79f39b3cb
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_COPA_C.inst.cfg
@@ -0,0 +1,64 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = c
+weight = 0
+material = emotiontech_copa
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 3
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 40/55)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 27/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 20
+cool_fan_speed_max = 80
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 3
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 4
+cool_lift_head = True
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 90
+skin_material_flow = 92
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+retraction_amount = 3
+retraction_speed = 35
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 10
+bridge_wall_material_flow = 50
+bridge_skin_speed = 10
+bridge_skin_material_flow = 60
+bridge_skin_density = 80
+bridge_fan_speed = 80
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_COPA_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_COPA_D.inst.cfg
new file mode 100644
index 0000000000..50bfeb6f0e
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_COPA_D.inst.cfg
@@ -0,0 +1,64 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = d
+weight = -1
+material = emotiontech_copa
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 3
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 43/60)
+speed_wall_0 = =math.ceil(speed_wall * 33/43)
+speed_topbottom = =math.ceil(speed_print * 37/60)
+speed_layer_0 = =math.ceil(speed_print * 25/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 20
+cool_fan_speed_max = 80
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 3
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 4
+cool_lift_head = True
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 91
+skin_material_flow = 92
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+retraction_amount = 3
+retraction_speed = 35
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 10
+bridge_wall_material_flow = 50
+bridge_skin_speed = 10
+bridge_skin_material_flow = 60
+bridge_skin_density = 80
+bridge_fan_speed = 80
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PC_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PC_B.inst.cfg
new file mode 100644
index 0000000000..e9b0bb34d2
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PC_B.inst.cfg
@@ -0,0 +1,59 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = b
+weight = 1
+material = emotiontech_pc
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 37/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/37)
+speed_topbottom = =math.ceil(speed_print * 33/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 20
+cool_fan_speed_max = 20
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 3
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 8
+cool_lift_head = true
+support_angle = 60
+material_print_temperature = 270 
+material_print_temperature_layer_0 = 275
+material_flow = 87
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+retraction_amount = 2
+retraction_speed = 25
+
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 10
+bridge_wall_material_flow = 75
+bridge_skin_speed = 10
+bridge_skin_material_flow = 80
+bridge_skin_density = 100
+bridge_fan_speed = 100
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PC_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PC_C.inst.cfg
new file mode 100644
index 0000000000..aef8a24812
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PC_C.inst.cfg
@@ -0,0 +1,59 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = c
+weight = 0
+material = emotiontech_pc
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 40/55)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 27/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 20
+cool_fan_speed_max = 20
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 3
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 8
+cool_lift_head = true
+support_angle = 60
+material_print_temperature = 270 
+material_print_temperature_layer_0 = 275
+material_flow = 87
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+retraction_amount = 2
+retraction_speed = 25
+
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 10
+bridge_wall_material_flow = 75
+bridge_skin_speed = 10
+bridge_skin_material_flow = 80
+bridge_skin_density = 100
+bridge_fan_speed = 100
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PC_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PC_D.inst.cfg
new file mode 100644
index 0000000000..6e75f8f6b3
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PC_D.inst.cfg
@@ -0,0 +1,59 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = d
+weight = -1
+material = emotiontech_pc
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 43/60)
+speed_wall_0 = =math.ceil(speed_wall * 33/43)
+speed_topbottom = =math.ceil(speed_print * 37/60)
+speed_layer_0 = =math.ceil(speed_print * 25/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 20
+cool_fan_speed_max = 20
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 3
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 8
+cool_lift_head = true
+support_angle = 60
+material_print_temperature = 270 
+material_print_temperature_layer_0 = 275
+material_flow = 87
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+retraction_amount = 2
+retraction_speed = 25
+
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 10
+bridge_wall_material_flow = 75
+bridge_skin_speed = 10
+bridge_skin_material_flow = 80
+bridge_skin_density = 100
+bridge_fan_speed = 100
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_HT_B.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_HT_B.inst.cfg
new file mode 100644
index 0000000000..b95865e8a1
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_HT_B.inst.cfg
@@ -0,0 +1,53 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = b
+weight = 1
+material = emotiontech_pla_hr_870
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 37/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/37)
+speed_topbottom = =math.ceil(speed_print * 33/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 3
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 2
+support_angle = 60
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 90
+skin_material_flow = 91
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
+cool_lift_head = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_HT_C.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_HT_C.inst.cfg
new file mode 100644
index 0000000000..cd14742169
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_HT_C.inst.cfg
@@ -0,0 +1,53 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = c
+weight = 0
+material = emotiontech_pla_hr_870
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 40/55)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 27/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 3
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 2
+support_angle = 55
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 90
+skin_material_flow = 91
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
+cool_lift_head = True
diff --git a/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_HT_D.inst.cfg b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_HT_D.inst.cfg
new file mode 100644
index 0000000000..bfbb381697
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.6/s3d_std0.6_PLA_HT_D.inst.cfg
@@ -0,0 +1,53 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = d
+weight = -1
+material = emotiontech_pla_hr_870
+variant = Standard 0.6
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.6
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.55
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.5
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 45/60)
+speed_wall_0 = =math.ceil(speed_wall * 33/45)
+speed_topbottom = =math.ceil(speed_print * 40/60)
+speed_layer_0 = =math.ceil(speed_print * 30/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 3
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 2
+support_angle = 50
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 90
+skin_material_flow = 91
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
+cool_lift_head = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_COPA_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_COPA_C.inst.cfg
new file mode 100644
index 0000000000..4fe3896fff
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_COPA_C.inst.cfg
@@ -0,0 +1,65 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = c
+weight = 1
+material = emotiontech_copa
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 4
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 20
+cool_fan_speed_max = 80
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 4
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 8
+cool_lift_head = True
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 93
+skin_material_flow = 94
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+retraction_hop_enabled = True
+retraction_hop = 2
+retraction_speed = 35
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 10
+bridge_wall_material_flow = 50
+bridge_skin_speed = 10
+bridge_skin_material_flow = 60
+bridge_skin_density = 80
+bridge_fan_speed = 80
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_COPA_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_COPA_D.inst.cfg
new file mode 100644
index 0000000000..9878ad1dec
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_COPA_D.inst.cfg
@@ -0,0 +1,65 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = d
+weight = 0
+material = emotiontech_copa
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 4
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 20
+cool_fan_speed_max = 80
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 4
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 8
+cool_lift_head = True
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 93
+skin_material_flow = 94
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+retraction_hop_enabled = True
+retraction_hop = 2
+retraction_speed = 35
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 10
+bridge_wall_material_flow = 50
+bridge_skin_speed = 10
+bridge_skin_material_flow = 60
+bridge_skin_density = 80
+bridge_fan_speed = 80
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_COPA_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_COPA_E.inst.cfg
new file mode 100644
index 0000000000..2876cef34b
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_COPA_E.inst.cfg
@@ -0,0 +1,65 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = e
+weight = -1
+material = emotiontech_copa
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 4
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 20
+cool_fan_speed_max = 80
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 4
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 8
+cool_lift_head = True
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 93
+skin_material_flow = 94
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+retraction_hop_enabled = True
+retraction_hop = 2
+retraction_speed = 35
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 10
+bridge_wall_material_flow = 50
+bridge_skin_speed = 10
+bridge_skin_material_flow = 60
+bridge_skin_density = 80
+bridge_fan_speed = 80
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PC_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PC_C.inst.cfg
new file mode 100644
index 0000000000..d312d53617
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PC_C.inst.cfg
@@ -0,0 +1,60 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = c
+weight = 1
+material = emotiontech_pc
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 50
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 3
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 12
+cool_lift_head = True
+support_angle = 60
+material_print_temperature = 280
+material_print_temperature_layer_0 = 285
+material_flow = 89
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_speed = 35
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 12
+bridge_wall_material_flow = 50
+bridge_skin_speed = 12
+bridge_skin_material_flow = 60
+bridge_skin_density = 80
+bridge_fan_speed = 100
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PC_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PC_D.inst.cfg
new file mode 100644
index 0000000000..944f87965f
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PC_D.inst.cfg
@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = d
+weight = 0
+material = emotiontech_pc
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 50
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 3
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 12
+cool_lift_head = True
+support_angle = 60
+material_print_temperature = 280
+material_print_temperature_layer_0 = 285
+material_flow = 89
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_speed = 35
+
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 12
+bridge_wall_material_flow = 50
+bridge_skin_speed = 12
+bridge_skin_material_flow = 60
+bridge_skin_density = 80
+bridge_fan_speed = 100
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PC_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PC_E.inst.cfg
new file mode 100644
index 0000000000..5013974000
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PC_E.inst.cfg
@@ -0,0 +1,60 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = e
+weight = -1
+material = emotiontech_pc
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 50
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 3
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 12
+cool_lift_head = True
+support_angle = 60
+material_print_temperature = 280
+material_print_temperature_layer_0 = 285
+material_flow = 89
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_speed = 35
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 12
+bridge_wall_material_flow = 50
+bridge_skin_speed = 12
+bridge_skin_material_flow = 60
+bridge_skin_density = 80
+bridge_fan_speed = 100
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_HT_C.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_HT_C.inst.cfg
new file mode 100644
index 0000000000..a099dfc92f
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_HT_C.inst.cfg
@@ -0,0 +1,51 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = c
+weight = 1
+material = emotiontech_pla_hr_870
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 4
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 2
+support_angle = 55
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 93
+skin_material_flow = 94
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+cool_lift_head = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_HT_D.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_HT_D.inst.cfg
new file mode 100644
index 0000000000..5a5521fc36
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_HT_D.inst.cfg
@@ -0,0 +1,53 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = d
+weight = 0
+material = emotiontech_pla_hr_870
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 4
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 2
+support_angle = 50
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 93
+skin_material_flow = 94
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
+cool_lift_head = True
\ No newline at end of file
diff --git a/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_HT_E.inst.cfg b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_HT_E.inst.cfg
new file mode 100644
index 0000000000..87532ab201
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_0.8/s3d_std0.8_PLA_HT_E.inst.cfg
@@ -0,0 +1,53 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = e
+weight = -1
+material = emotiontech_pla_hr_870
+variant = Standard 0.8
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.8
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.75
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 4
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 2
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 93
+skin_material_flow = 94
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
+cool_lift_head = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ABS_D.inst.cfg
new file mode 100644
index 0000000000..9da6bba4ab
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ABS_D.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = d
+weight = 1
+material = emotiontech_abs
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.95
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 45
+speed_wall = =math.ceil(speed_print * 37/45)
+speed_wall_0 = =math.ceil(speed_wall * 30/37)
+speed_topbottom = =math.ceil(speed_print * 35/45)
+speed_layer_0 = =math.ceil(speed_print * 25/45)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =layer_height
+support_xy_distance = =line_width * 2
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ABS_E.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ABS_E.inst.cfg
new file mode 100644
index 0000000000..53c22efa66
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ABS_E.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = e
+weight = 0
+material = emotiontech_abs
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.95
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 45
+speed_wall = =math.ceil(speed_print * 37/45)
+speed_wall_0 = =math.ceil(speed_wall * 30/37)
+speed_topbottom = =math.ceil(speed_print * 35/45)
+speed_layer_0 = =math.ceil(speed_print * 25/45)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 97
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =layer_height
+support_xy_distance = =line_width * 2
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ABS_F.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ABS_F.inst.cfg
new file mode 100644
index 0000000000..a7c694306a
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ABS_F.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = -1
+material = emotiontech_abs
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.95
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 45
+speed_wall = =math.ceil(speed_print * 37/45)
+speed_wall_0 = =math.ceil(speed_wall * 30/37)
+speed_topbottom = =math.ceil(speed_print * 35/45)
+speed_layer_0 = =math.ceil(speed_print * 25/45)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature +5
+material_flow = 97
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =layer_height
+support_xy_distance = =line_width * 2
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg
new file mode 100644
index 0000000000..e4406a6cf1
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = d
+weight = 1
+material = emotiontech_asax
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.95
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 45
+speed_wall = =math.ceil(speed_print * 37/45)
+speed_wall_0 = =math.ceil(speed_wall * 30/37)
+speed_topbottom = =math.ceil(speed_print * 35/45)
+speed_layer_0 = =math.ceil(speed_print * 25/45)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 40
+cool_fan_speed_max = 75
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 1
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 100
+retraction_extra_prime_amount = 0.4
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =layer_height
+support_xy_distance = =line_width * 1.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg
new file mode 100644
index 0000000000..7a073eba3a
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = e
+weight = 0
+material = emotiontech_asax
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.95
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 45
+speed_wall = =math.ceil(speed_print * 37/45)
+speed_wall_0 = =math.ceil(speed_wall * 30/37)
+speed_topbottom = =math.ceil(speed_print * 35/45)
+speed_layer_0 = =math.ceil(speed_print * 25/45)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 40
+cool_fan_speed_max = 75
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 100
+retraction_extra_prime_amount = 0.4
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =layer_height
+support_xy_distance = =line_width * 1.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg
new file mode 100644
index 0000000000..87d547d1f9
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = -1
+material = emotiontech_asax
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.95
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 45
+speed_wall = =math.ceil(speed_print * 37/45)
+speed_wall_0 = =math.ceil(speed_wall * 30/37)
+speed_topbottom = =math.ceil(speed_print * 35/45)
+speed_layer_0 = =math.ceil(speed_print * 25/45)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 40
+cool_fan_speed_max = 75
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 7
+material_flow = 100
+retraction_extra_prime_amount = 0.4
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =layer_height
+support_xy_distance = =line_width * 1.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_BVOH_D.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_BVOH_D.inst.cfg
new file mode 100644
index 0000000000..d9963221a2
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_BVOH_D.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = d
+weight = 1
+material = emotiontech_bvoh
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 25/30)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 47
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_BVOH_E.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_BVOH_E.inst.cfg
new file mode 100644
index 0000000000..3ca7f21a99
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_BVOH_E.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = e
+weight = 0
+material = emotiontech_bvoh
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 25/30)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 47
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_BVOH_F.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_BVOH_F.inst.cfg
new file mode 100644
index 0000000000..01d3d877be
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_BVOH_F.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = -1
+material = emotiontech_bvoh
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 25/30)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 47
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_HIPS_D.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_HIPS_D.inst.cfg
new file mode 100644
index 0000000000..24c7c0a0d2
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_HIPS_D.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = d
+weight = 1
+material = emotiontech_hips
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 47
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_HIPS_E.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_HIPS_E.inst.cfg
new file mode 100644
index 0000000000..3dcfb5b710
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_HIPS_E.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = e
+weight = 0
+material = emotiontech_hips
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 47
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True 
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_HIPS_F.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_HIPS_F.inst.cfg
new file mode 100644
index 0000000000..28c37958aa
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_HIPS_F.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = -1
+material = emotiontech_hips
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 47
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PETG_D.inst.cfg
new file mode 100644
index 0000000000..43e37f274b
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PETG_D.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = d
+weight = 1
+material = emotiontech_petg
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.95
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 45
+speed_wall = =math.ceil(speed_print * 40/45)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/45)
+speed_layer_0 = =math.ceil(speed_print * 25/45)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 70
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 95
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PETG_E.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PETG_E.inst.cfg
new file mode 100644
index 0000000000..29c62694ed
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PETG_E.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = e
+weight = 0
+material = emotiontech_petg
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.95
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 45
+speed_wall = =math.ceil(speed_print * 40/45)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/45)
+speed_layer_0 = =math.ceil(speed_print * 25/45)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 70
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 95
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PETG_F.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PETG_F.inst.cfg
new file mode 100644
index 0000000000..535b328920
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PETG_F.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = -1
+material = emotiontech_petg
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.95
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 45
+speed_wall = =math.ceil(speed_print * 40/45)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/45)
+speed_layer_0 = =math.ceil(speed_print * 25/45)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 70
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 95
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PLA_D.inst.cfg
new file mode 100644
index 0000000000..2f68c62d4a
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PLA_D.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = d
+weight = 1
+material = emotiontech_pla
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.95
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PLA_E.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PLA_E.inst.cfg
new file mode 100644
index 0000000000..348899a078
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PLA_E.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = e
+weight = 0
+material = emotiontech_pla
+variant = Standard 1.0 Experimental 
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.95
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 100
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PLA_F.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PLA_F.inst.cfg
new file mode 100644
index 0000000000..f7aeb7ed3e
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PLA_F.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = -1
+material = emotiontech_pla
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.95
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 40/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature +5
+material_flow = 100
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg
new file mode 100644
index 0000000000..bad7ec2d98
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = d
+weight = 1
+material = emotiontech_pva-m
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 47
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg
new file mode 100644
index 0000000000..0b63cb9fc9
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = e
+weight = 0
+material = emotiontech_pva-m
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 47
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg
new file mode 100644
index 0000000000..b14e413eb5
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = -1
+material = emotiontech_pva-m
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 47
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg
new file mode 100644
index 0000000000..07bfa85f1d
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = d
+weight = 1
+material = emotiontech_pva-s
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 47
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg
new file mode 100644
index 0000000000..cae5069e8e
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = e
+weight = 0
+material = emotiontech_pva-s
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 47
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True 
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg
new file mode 100644
index 0000000000..cfd4d08c4b
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = -1
+material = emotiontech_pva-s
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.0
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 47
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg
new file mode 100644
index 0000000000..e7274a345b
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = D
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = d
+weight = 1
+material = emotiontech_tpu98a
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_0_wipe_dist = =machine_nozzle_size
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 35/35)
+speed_wall_0 = =math.ceil(speed_wall * 27/35)
+speed_topbottom = =math.ceil(speed_print * 23/35)
+speed_layer_0 = =math.ceil(speed_print * 20/35)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 2
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 107
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 0.7
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg
new file mode 100644
index 0000000000..5a78cb378e
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = E
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = e
+weight = 0
+material = emotiontech_tpu98a
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_0_wipe_dist = =machine_nozzle_size
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 35/35)
+speed_wall_0 = =math.ceil(speed_wall * 27/35)
+speed_topbottom = =math.ceil(speed_print * 23/35)
+speed_layer_0 = =math.ceil(speed_print * 20/35)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 107
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 0.7
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg
new file mode 100644
index 0000000000..b84cf67f86
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = -1
+material = emotiontech_tpu98a
+variant = Standard 1.0 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.9
+wall_0_wipe_dist = =machine_nozzle_size
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 35/35)
+speed_wall_0 = =math.ceil(speed_wall * 27/35)
+speed_topbottom = =math.ceil(speed_print * 23/35)
+speed_layer_0 = =math.ceil(speed_print * 20/35)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 8
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 107
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 0.7
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ABS_F.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ABS_F.inst.cfg
new file mode 100644
index 0000000000..93354c7fd0
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ABS_F.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = 1
+material = emotiontech_abs
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.15
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_print * 25/40)
+speed_topbottom = =math.ceil(speed_print * 35/40)
+speed_layer_0 = =math.ceil(speed_print * 25/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 103
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =layer_height
+support_xy_distance = =line_width * 2
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ABS_G.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ABS_G.inst.cfg
new file mode 100644
index 0000000000..8ed7be678d
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ABS_G.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = G
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = g
+weight = 0
+material = emotiontech_abs
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.15
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 37
+speed_wall = =math.ceil(speed_print * 30/37)
+speed_wall_0 = =math.ceil(speed_print * 25/37)
+speed_topbottom = =math.ceil(speed_print * 33/37)
+speed_layer_0 = =math.ceil(speed_print * 25/37)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 102
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =layer_height
+support_xy_distance = =line_width * 2
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ABS_H.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ABS_H.inst.cfg
new file mode 100644
index 0000000000..e1165a486e
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ABS_H.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = H
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = h
+weight = -1
+material = emotiontech_abs
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.15
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 27/35)
+speed_wall_0 = =math.ceil(speed_print * 23/35)
+speed_topbottom = =math.ceil(speed_print * 30/35)
+speed_layer_0 = =math.ceil(speed_print * 25/35)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature +5
+material_flow = 101
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =layer_height
+support_xy_distance = =line_width * 2
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg
new file mode 100644
index 0000000000..8d7179bda4
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = 1
+material = emotiontech_asax
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.15
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_print * 25/40)
+speed_topbottom = =math.ceil(speed_print * 35/40)
+speed_layer_0 = =math.ceil(speed_print * 25/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 40
+cool_fan_speed_max = 75
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 1
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 100
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =layer_height
+support_xy_distance = =line_width * 1.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg
new file mode 100644
index 0000000000..c090c5c42e
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = G
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = g
+weight = 0
+material = emotiontech_asax
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.15
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 37
+speed_wall = =math.ceil(speed_print * 30/37)
+speed_wall_0 = =math.ceil(speed_print * 25/37)
+speed_topbottom = =math.ceil(speed_print * 33/37)
+speed_layer_0 = =math.ceil(speed_print * 25/37)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 40
+cool_fan_speed_max = 75
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 100
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =layer_height
+support_xy_distance = =line_width * 1.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg
new file mode 100644
index 0000000000..978f0f2e42
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = H
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = h
+weight = -1
+material = emotiontech_asax
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.15
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 27/35)
+speed_wall_0 = =math.ceil(speed_print * 23/35)
+speed_topbottom = =math.ceil(speed_print * 30/35)
+speed_layer_0 = =math.ceil(speed_print * 25/35)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 40
+cool_fan_speed_max = 75
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 7
+material_flow = 100
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =layer_height
+support_xy_distance = =line_width * 1.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_BVOH_F.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_BVOH_F.inst.cfg
new file mode 100644
index 0000000000..d0f064e2ad
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_BVOH_F.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = 1
+material = emotiontech_bvoh
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 25/30)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_BVOH_G.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_BVOH_G.inst.cfg
new file mode 100644
index 0000000000..5fbafaf0b5
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_BVOH_G.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = G
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = g
+weight = 0
+material = emotiontech_bvoh
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 25/30)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_BVOH_H.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_BVOH_H.inst.cfg
new file mode 100644
index 0000000000..f48c0c6372
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_BVOH_H.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = H
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = h
+weight = -1
+material = emotiontech_bvoh
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 25/30)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_HIPS_F.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_HIPS_F.inst.cfg
new file mode 100644
index 0000000000..8867918a4e
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_HIPS_F.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = 1
+material = emotiontech_hips
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 103
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True 
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_HIPS_G.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_HIPS_G.inst.cfg
new file mode 100644
index 0000000000..1434fa6cf9
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_HIPS_G.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = G
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = g
+weight = 0
+material = emotiontech_hips
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 102
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_HIPS_H.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_HIPS_H.inst.cfg
new file mode 100644
index 0000000000..5570fcc080
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_HIPS_H.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = H
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = h
+weight = -1
+material = emotiontech_hips
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 101
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PETG_F.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PETG_F.inst.cfg
new file mode 100644
index 0000000000..11c7237f72
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PETG_F.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = 1
+material = emotiontech_petg
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.15
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_print * 25/40)
+speed_topbottom = =math.ceil(speed_print * 35/40)
+speed_layer_0 = =math.ceil(speed_print * 25/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 70
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PETG_G.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PETG_G.inst.cfg
new file mode 100644
index 0000000000..a690852d6d
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PETG_G.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = G
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = g
+weight = 0
+material = emotiontech_petg
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.15
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 37
+speed_wall = =math.ceil(speed_print * 30/37)
+speed_wall_0 = =math.ceil(speed_print * 25/37)
+speed_topbottom = =math.ceil(speed_print * 33/37)
+speed_layer_0 = =math.ceil(speed_print * 25/37)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 70
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 100
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PETG_H.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PETG_H.inst.cfg
new file mode 100644
index 0000000000..e1427f7261
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PETG_H.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = H
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = h
+weight = -1
+material = emotiontech_petg
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.15
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 27/35)
+speed_wall_0 = =math.ceil(speed_print * 23/35)
+speed_topbottom = =math.ceil(speed_print * 30/35)
+speed_layer_0 = =math.ceil(speed_print * 25/35)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 70
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 95
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PLA_F.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PLA_F.inst.cfg
new file mode 100644
index 0000000000..60cff478fa
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PLA_F.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = 1
+material = emotiontech_pla
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.15
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_print * 25/40)
+speed_topbottom = =math.ceil(speed_print * 35/40)
+speed_layer_0 = =math.ceil(speed_print * 25/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 107
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PLA_G.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PLA_G.inst.cfg
new file mode 100644
index 0000000000..7b950edfa2
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PLA_G.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = G
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = g
+weight = 0
+material = emotiontech_pla
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.15
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 37
+speed_wall = =math.ceil(speed_print * 30/37)
+speed_wall_0 = =math.ceil(speed_print * 25/37)
+speed_topbottom = =math.ceil(speed_print * 33/37)
+speed_layer_0 = =math.ceil(speed_print * 25/37)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 105
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 5
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PLA_H.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PLA_H.inst.cfg
new file mode 100644
index 0000000000..ecd368a270
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PLA_H.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = H
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = h
+weight = -1
+material = emotiontech_pla
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.15
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 27/35)
+speed_wall_0 = =math.ceil(speed_print * 23/35)
+speed_topbottom = =math.ceil(speed_print * 30/35)
+speed_layer_0 = =math.ceil(speed_print * 25/35)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 103
+retraction_extra_prime_amount = 0.5
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg
new file mode 100644
index 0000000000..0708094f91
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = 1
+material = emotiontech_pva-m
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 37
+speed_wall = =math.ceil(speed_print * 30/37)
+speed_wall_0 = =math.ceil(speed_print * 25/37)
+speed_topbottom = =math.ceil(speed_print * 33/37)
+speed_layer_0 = =math.ceil(speed_print * 25/37)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg
new file mode 100644
index 0000000000..ed66a4f7c2
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = G
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = g
+weight = 0
+material = emotiontech_pva-m
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg
new file mode 100644
index 0000000000..159d4b4a7f
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = H
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = h
+weight = -1
+material = emotiontech_pva-m
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg
new file mode 100644
index 0000000000..bfd7675d4a
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = 1
+material = emotiontech_pva-s
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True 
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg
new file mode 100644
index 0000000000..ebfee74710
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = G
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = g
+weight = 0
+material = emotiontech_pva-s
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg
new file mode 100644
index 0000000000..c62593e0d9
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg
@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = H
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = h
+weight = -1
+material = emotiontech_pva-s
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.2
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg
new file mode 100644
index 0000000000..5c03adb738
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = F
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = f
+weight = 1
+material = emotiontech_tpu98a
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_0_wipe_dist = =machine_nozzle_size
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 35/35)
+speed_wall_0 = =math.ceil(speed_wall * 27/35)
+speed_topbottom = =math.ceil(speed_print * 23/35)
+speed_layer_0 = =math.ceil(speed_print * 20/35)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 2
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 111
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 10
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg
new file mode 100644
index 0000000000..cf14d60956
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = G
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = g
+weight = 0
+material = emotiontech_tpu98a
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_0_wipe_dist = =machine_nozzle_size
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 35/35)
+speed_wall_0 = =math.ceil(speed_wall * 27/35)
+speed_topbottom = =math.ceil(speed_print * 23/35)
+speed_layer_0 = =math.ceil(speed_print * 20/35)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 111
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 10
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg
new file mode 100644
index 0000000000..242550e853
--- /dev/null
+++ b/resources/quality/strateo3d/Standard_1.2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg
@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = H
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = h
+weight = -1
+material = emotiontech_tpu98a
+variant = Standard 1.2 Experimental
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*1.1
+wall_0_wipe_dist = =machine_nozzle_size
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 35/35)
+speed_wall_0 = =math.ceil(speed_wall * 27/35)
+speed_topbottom = =math.ceil(speed_print * 23/35)
+speed_layer_0 = =math.ceil(speed_print * 20/35)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 6 * layer_height
+cool_min_speed = 10
+support_angle = 45
+material_print_temperature = =default_material_print_temperature + 8
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 111
+retraction_extra_prime_amount = 0.3
+retraction_min_travel = =2*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 10
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
diff --git a/resources/variants/strateo3d_standard_10.inst.cfg b/resources/variants/strateo3d_standard_10.inst.cfg
new file mode 100644
index 0000000000..eccec36f09
--- /dev/null
+++ b/resources/variants/strateo3d_standard_10.inst.cfg
@@ -0,0 +1,20 @@
+[general]
+name = Standard 1.0 Experimental
+version = 4
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_id = Standard 1.0 Experimental
+machine_nozzle_size = 1.0
+machine_nozzle_tip_outer_diameter = 2.5
+layer_height = 0.5
+layer_height_0 = 0.6
+prime_tower_enable = True
+retract_at_layer_change = True
+support_angle = 50
+support_use_towers = True
\ No newline at end of file
diff --git a/resources/variants/strateo3d_standard_12.inst.cfg b/resources/variants/strateo3d_standard_12.inst.cfg
new file mode 100644
index 0000000000..3d6e8dad80
--- /dev/null
+++ b/resources/variants/strateo3d_standard_12.inst.cfg
@@ -0,0 +1,20 @@
+[general]
+name = Standard 1.2 Experimental
+version = 4
+definition = strateo3d
+
+[metadata]
+setting_version = 16
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_id = Standard 1.2 Experimental
+machine_nozzle_size = 1.2
+machine_nozzle_tip_outer_diameter = 3.0
+layer_height = 0.6
+layer_height_0 = 0.7
+prime_tower_enable = True
+retract_at_layer_change = True
+support_angle = 50
+support_use_towers = True
\ No newline at end of file