diff --git a/resources/intent/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg
new file mode 100644
index 0000000000..f627fbf74b
--- /dev/null
+++ b/resources/intent/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Quick
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+intent_category = smooth
+quality_type = draft
+material = generic_abs
+variant = AA 0.4
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_layer_0 = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
diff --git a/resources/intent/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg b/resources/intent/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..be622d6cfe
--- /dev/null
+++ b/resources/intent/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_abs
+variant = AA 0.4
+
+[values]
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+xy_offset = =- layer_height * 0.2
diff --git a/resources/intent/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg b/resources/intent/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..352c26d312
--- /dev/null
+++ b/resources/intent/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_abs
+variant = AA 0.4
+
+[values]
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+xy_offset = =- layer_height * 0.2
diff --git a/resources/intent/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg
new file mode 100644
index 0000000000..553a68201d
--- /dev/null
+++ b/resources/intent/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Quick
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+intent_category = smooth
+quality_type = draft
+material = generic_pla
+variant = AA 0.4
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_layer_0 = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
diff --git a/resources/intent/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg b/resources/intent/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..0943bb2032
--- /dev/null
+++ b/resources/intent/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_pla
+variant = AA 0.4
+
+[values]
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+xy_offset = =- layer_height * 0.2
diff --git a/resources/intent/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..053b849aff
--- /dev/null
+++ b/resources/intent/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_pla
+variant = AA 0.4
+
+[values]
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+xy_offset = =- layer_height * 0.2
diff --git a/resources/intent/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
new file mode 100644
index 0000000000..458b283dd8
--- /dev/null
+++ b/resources/intent/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Quick
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+intent_category = smooth
+quality_type = draft
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_layer_0 = 20
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width
diff --git a/resources/intent/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg b/resources/intent/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..d19ad53fae
--- /dev/null
+++ b/resources/intent/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+xy_offset = =- layer_height * 0.2
diff --git a/resources/intent/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..23d8b1e39b
--- /dev/null
+++ b/resources/intent/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 10
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_tough_pla
+variant = AA 0.4
+
+[values]
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+xy_offset = =- layer_height * 0.2