Merge branch 'themaninthesuitcase-printrbot_play'

resources/definitions/printrbot_play.def.json

@@ -0,0 +1,51 @@
+{
+    "id": "printrbot_play",
+    "version": 2,
+    "name": "Printrbot Play",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Chris Pearson",
+        "manufacturer": "Printrbot",
+        "category": "Other",
+        "file_formats": "text/x-gcode",
+        "platform": "printrbot_play.stl"
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "Printrbot Play" },
+        "machine_heated_bed": { "default_value": false },
+        "machine_width": { "default_value": 100 },
+        "machine_depth": { "default_value": 100 },
+        "machine_height": { "default_value": 130 },
+        "machine_center_is_zero": { "default_value": false },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "layer_height": { "default_value": 0.2 },
+        "layer_height_0": { "default_value": 0.3 },
+        "retraction_amount": { "default_value": 0.7 },
+        "retraction_speed": { "default_value": 45},
+        "adhesion_type": { "default_value": "skirt" },
+        "machine_head_with_fans_polygon": { "default_value": [[-32,999],[37,999],[37,-32],[-32,-32]] },
+        "gantry_height": { "default_value": 55 },
+        "speed_print": { "default_value": 50 },
+        "speed_travel": { "default_value": 55 },
+        "machine_max_feedrate_x": {"default_value": 125},
+        "machine_max_feedrate_y": {"default_value": 125},
+        "machine_max_feedrate_z": { "default_value": 5 },
+        "machine_max_acceleration_x": { "default_value": 2000 },
+        "machine_max_acceleration_y": { "default_value": 2000 },
+        "machine_max_acceleration_z": { "default_value": 30 },
+        "machine_max_acceleration_e": { "default_value": 10000 },
+        "machine_max_jerk_xy": { "default_value": 20 },
+        "machine_max_jerk_z": { "default_value": 0.4 },
+        "machine_max_jerk_e": { "default_value": 5.0 },
+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
+        "machine_start_gcode": {
+            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM106 ;start with the fan on for filament cooling\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29 ;run auto bed leveling\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
+        },
+        "machine_end_gcode": {
+            "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
+        }
+    }
+}

resources/definitions/printrbot_play_heated.def.json

@@ -0,0 +1,20 @@
+{
+    "id": "printrbot_play_heated",
+    "version": 2,
+    "name": "Printrbot Play (Heated Bed)",
+    "inherits": "printrbot_play",
+    "metadata": {
+        "visible": true,
+        "author": "Chris Pearson",
+        "manufacturer": "Printrbot",
+        "category": "Other",
+        "file_formats": "text/x-gcode",
+        "platform": ""
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "Printrbot Play (Heated Bed)" },
+        "machine_heated_bed": { "default_value": true },
+        "machine_depth": { "default_value": 203 }
+    }
+}