diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg
index 13202adff1..4fcedc258a 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg
@@ -25,7 +25,7 @@ acceleration_wall_x = =acceleration_wall
 adhesion_type = brim
 brim_width = 7
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
+cool_fan_speed = 5
 cool_fan_speed_max = 100
 cool_min_layer_time = 5
 cool_min_speed = 5
@@ -95,20 +95,20 @@ travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
 wall_thickness = 1
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
+support_line_width = =line_width
+support_pattern = zigzag
+support_infill_rate = 15
+support_join_distance = 2
+support_offset = 0.2
+support_interface_enable = False
+support_use_towers = True
+raft_margin = 15
+raft_airgap = 0.3
+raft_surface_layers = 2
+raft_surface_thickness = =resolveOrValue('layer_height')
+raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
+raft_interface_line_width = =line_width * 2
+raft_interface_line_spacing = =raft_interface_line_width + 0.2
 support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
 retraction_amount = 6.5
 
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg
index 36ebf401ee..ef4122439d 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg
@@ -25,7 +25,7 @@ acceleration_wall_x = =acceleration_wall
 adhesion_type = brim
 brim_width = 7
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
+cool_fan_speed = 5
 cool_fan_speed_max = 100
 cool_min_layer_time = 5
 cool_min_speed = 7
@@ -95,21 +95,21 @@ travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
 wall_thickness = 1.3
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
+support_line_width = =line_width
+support_pattern = zigzag
+support_infill_rate = 15
+support_join_distance = 2
+support_offset = 0.2
+support_interface_enable = False
+support_use_towers = True
+raft_margin = 15
+raft_airgap = 0.3
+raft_surface_layers = 2
+raft_surface_thickness = =resolveOrValue('layer_height')
+raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
+raft_interface_line_width = =line_width * 2
+raft_interface_line_spacing = =raft_interface_line_width + 0.2
+support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
 retraction_amount = 6.5
 
 cool_min_layer_time_fan_speed_max = 10
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg
index b9d0c343c2..8e4b7ea767 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg
@@ -25,7 +25,7 @@ acceleration_wall_x = =acceleration_wall
 adhesion_type = brim
 brim_width = 7
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
+cool_fan_speed = 5
 cool_fan_speed_max = 100
 cool_min_layer_time = 5
 cool_min_speed = 12
@@ -95,21 +95,21 @@ travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
 wall_thickness = 1.3
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
+support_line_width = =line_width
+support_pattern = zigzag
+support_infill_rate = 15
+support_join_distance = 2
+support_offset = 0.2
+support_interface_enable = False
+support_use_towers = True
+raft_margin = 15
+raft_airgap = 0.3
+raft_surface_layers = 2
+raft_surface_thickness = =resolveOrValue('layer_height')
+raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
+raft_interface_line_width = =line_width * 2
+raft_interface_line_spacing = =raft_interface_line_width + 0.2
+support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
 retraction_amount = 6.5
 
 cool_min_layer_time_fan_speed_max = 10
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg
index cdefcf71d6..7e17443c2b 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg
@@ -25,7 +25,7 @@ acceleration_wall_x = =acceleration_wall
 adhesion_type = brim
 brim_width = 7
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
+cool_fan_speed = 5
 cool_fan_speed_max = 100
 cool_min_layer_time = 5
 cool_min_speed = 5
@@ -95,21 +95,21 @@ travel_compensate_overlapping_walls_enabled = True
 wall_0_inset = 0
 wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
 wall_thickness = 1.3
-support_line_width = =line_width
-support_pattern = zigzag
-support_infill_rate = 15
-support_join_distance = 2
-support_offset = 0.2
-support_interface_enable = False
-support_use_towers = True
-raft_margin = 15
-raft_airgap = 0.3
-raft_surface_layers = 2
-raft_surface_thickness = =resolveOrValue('layer_height')
-raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
-raft_interface_line_width = =line_width * 2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
-support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
+support_line_width = =line_width
+support_pattern = zigzag
+support_infill_rate = 15
+support_join_distance = 2
+support_offset = 0.2
+support_interface_enable = False
+support_use_towers = True
+raft_margin = 15
+raft_airgap = 0.3
+raft_surface_layers = 2
+raft_surface_thickness = =resolveOrValue('layer_height')
+raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
+raft_interface_line_width = =line_width * 2
+raft_interface_line_spacing = =raft_interface_line_width + 0.2
+support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
 retraction_amount = 6.5
 
 cool_min_layer_time_fan_speed_max = 10