diff --git a/.github/workflows/linux.yml b/.github/workflows/linux.yml
index cdbb66a5b4..1dee7a237f 100644
--- a/.github/workflows/linux.yml
+++ b/.github/workflows/linux.yml
@@ -147,7 +147,7 @@ jobs:
         run: conan config set storage.download_cache="$HOME/.conan/conan_download_cache"
 
       - name: Create the Packages (Bash)
-        run: conan install $CURA_CONAN_VERSION ${{ inputs.conan_args }} --build=missing --update -if cura_inst -g VirtualPythonEnv -o cura:enterprise=$ENTERPRISE -o cura:staging=$STAGING --json "cura_inst/conan_install_info.json"
+        run: conan install $CURA_CONAN_VERSION ${{ inputs.conan_args }} --build=missing --update -if cura_inst -g VirtualPythonEnv -o cura:enterprise=$ENTERPRISE -o cura:staging=$STAGING -c tools.build:skip_test=True
 
       - name: Remove internal packages before uploading
         run: |
@@ -196,19 +196,12 @@ jobs:
               f.write(content)
               f.writelines(f"INSTALLER_FILENAME={installer_filename}\n")
 
-      - name: Summarize the used Conan dependencies
+      - name: Summarize the used dependencies
         shell: python
         run: |
           import os
-          import json
-          from pathlib import Path
           
-          conan_install_info_path = Path("cura_inst/conan_install_info.json")
-          conan_info = {"installed": []}
-          if os.path.exists(conan_install_info_path):
-              with open(conan_install_info_path, "r") as f:
-                  conan_info = json.load(f)
-          sorted_deps = sorted([dep["recipe"]["id"].replace('#', r' rev: ') for dep in conan_info["installed"]])
+          from cura.CuraVersion import ConanInstalls, PythonInstalls
           
           summary_env = os.environ["GITHUB_STEP_SUMMARY"]
           content = ""
@@ -220,25 +213,12 @@ jobs:
               f.write(content)
               f.writelines("# ${{ steps.filename.outputs.INSTALLER_FILENAME }}\n")
               f.writelines("## Conan packages:\n")
-              for dep in sorted_deps:
-                  f.writelines(f"`{dep}`\n")
+              for dep_name, dep_info in ConanInstalls.items():
+                  f.writelines(f"`{dep_name} {dep_info['version']} {dep_info['revision']}`\n")
 
-      - name: Summarize the used Python modules
-        shell: python
-        run: |
-          import os
-          import pkg_resources
-          summary_env = os.environ["GITHUB_STEP_SUMMARY"]
-          content = ""
-          if os.path.exists(summary_env):
-              with open(summary_env, "r") as f:
-                  content = f.read()
-          
-          with open(summary_env, "w") as f:
-              f.write(content)
               f.writelines("## Python modules:\n")
-              for package in pkg_resources.working_set:
-                  f.writelines(f"`{package.key}/{package.version}`\n")
+              for dep_name, dep_info in PythonInstalls.items():
+                  f.writelines(f"`{dep_name} {dep_info['version']}`\n")
 
       - name: Create the Linux AppImage (Bash)
         run: |
diff --git a/.github/workflows/macos.yml b/.github/workflows/macos.yml
index 028822d778..3bde4f1b00 100644
--- a/.github/workflows/macos.yml
+++ b/.github/workflows/macos.yml
@@ -156,7 +156,7 @@ jobs:
         run: conan config set storage.download_cache="$HOME/.conan/conan_download_cache"
 
       - name: Create the Packages (Bash)
-        run: conan install $CURA_CONAN_VERSION ${{ inputs.conan_args }} --build=missing --update -if cura_inst -g VirtualPythonEnv -o cura:enterprise=$ENTERPRISE -o cura:staging=$STAGING --json "cura_inst/conan_install_info.json"
+        run: conan install $CURA_CONAN_VERSION ${{ inputs.conan_args }} --build=missing --update -if cura_inst -g VirtualPythonEnv -o cura:enterprise=$ENTERPRISE -o cura:staging=$STAGING -c tools.build:skip_test=True
 
       - name: Remove internal packages before uploading
         run: |
@@ -208,19 +208,12 @@ jobs:
               f.write(content)
               f.writelines(f"INSTALLER_FILENAME={installer_filename}\n")
 
-      - name: Summarize the used Conan dependencies
+      - name: Summarize the used dependencies
         shell: python
         run: |
           import os
-          import json
-          from pathlib import Path
           
-          conan_install_info_path = Path("cura_inst/conan_install_info.json")
-          conan_info = {"installed": []}
-          if os.path.exists(conan_install_info_path):
-              with open(conan_install_info_path, "r") as f:
-                  conan_info = json.load(f)
-          sorted_deps = sorted([dep["recipe"]["id"].replace('#', r' rev: ') for dep in conan_info["installed"]])
+          from cura.CuraVersion import ConanInstalls, PythonInstalls
           
           summary_env = os.environ["GITHUB_STEP_SUMMARY"]
           content = ""
@@ -232,25 +225,12 @@ jobs:
               f.write(content)
               f.writelines("# ${{ steps.filename.outputs.INSTALLER_FILENAME }}\n")
               f.writelines("## Conan packages:\n")
-              for dep in sorted_deps:
-                  f.writelines(f"`{dep}`\n")
+              for dep_name, dep_info in ConanInstalls.items():
+                  f.writelines(f"`{dep_name} {dep_info['version']} {dep_info['revision']}`\n")
 
-      - name: Summarize the used Python modules
-        shell: python
-        run: |
-          import os
-          import pkg_resources
-          summary_env = os.environ["GITHUB_STEP_SUMMARY"]
-          content = ""
-          if os.path.exists(summary_env):
-              with open(summary_env, "r") as f:
-                  content = f.read()
-          
-          with open(summary_env, "w") as f:
-              f.write(content)
               f.writelines("## Python modules:\n")
-              for package in pkg_resources.working_set:
-                  f.writelines(f"`{package.key}/{package.version}`\n")
+              for dep_name, dep_info in PythonInstalls.items():
+                  f.writelines(f"`{dep_name} {dep_info['version']}`\n")
 
       - name: Create the Macos dmg (Bash)
         run: python ../cura_inst/packaging/MacOS/build_macos.py --source_path ../cura_inst --dist_path . --cura_conan_version $CURA_CONAN_VERSION --filename "${{ steps.filename.outputs.INSTALLER_FILENAME }}" --build_dmg --build_pkg --app_name "$CURA_APP_NAME"
diff --git a/.github/workflows/windows.yml b/.github/workflows/windows.yml
index 40d9df92c3..ad946d9d99 100644
--- a/.github/workflows/windows.yml
+++ b/.github/workflows/windows.yml
@@ -122,7 +122,7 @@ jobs:
         run: conan config set storage.download_cache="C:\Users\runneradmin\.conan\conan_download_cache"
 
       - name: Create the Packages (Powershell)
-        run: conan install $Env:CURA_CONAN_VERSION ${{ inputs.conan_args }} --build=missing --update -if cura_inst -g VirtualPythonEnv -o cura:enterprise=$Env:ENTERPRISE -o cura:staging=$Env:STAGING --json "cura_inst/conan_install_info.json"
+        run: conan install $Env:CURA_CONAN_VERSION ${{ inputs.conan_args }} --build=missing --update -if cura_inst -g VirtualPythonEnv -o cura:enterprise=$Env:ENTERPRISE -o cura:staging=$Env:STAGING -c tools.build:skip_test=True
 
       - name: Remove internal packages before uploading
         run: |
@@ -167,19 +167,12 @@ jobs:
               f.write(content)
               f.writelines(f"INSTALLER_FILENAME={installer_filename}\n")
 
-      - name: Summarize the used Conan dependencies
+      - name: Summarize the used dependencies
         shell: python
         run: |
           import os
-          import json
-          from pathlib import Path
           
-          conan_install_info_path = Path("cura_inst/conan_install_info.json")
-          conan_info = {"installed": []}
-          if os.path.exists(conan_install_info_path):
-              with open(conan_install_info_path, "r") as f:
-                  conan_info = json.load(f)
-          sorted_deps = sorted([dep["recipe"]["id"].replace('#', r' rev: ') for dep in conan_info["installed"]])
+          from cura.CuraVersion import ConanInstalls, PythonInstalls
           
           summary_env = os.environ["GITHUB_STEP_SUMMARY"]
           content = ""
@@ -191,25 +184,12 @@ jobs:
               f.write(content)
               f.writelines("# ${{ steps.filename.outputs.INSTALLER_FILENAME }}\n")
               f.writelines("## Conan packages:\n")
-              for dep in sorted_deps:
-                  f.writelines(f"`{dep}`\n")
+              for dep_name, dep_info in ConanInstalls.items():
+                  f.writelines(f"`{dep_name} {dep_info['version']} {dep_info['revision']}`\n")
 
-      - name: Summarize the used Python modules
-        shell: python
-        run: |
-          import os
-          import pkg_resources
-          summary_env = os.environ["GITHUB_STEP_SUMMARY"]
-          content = ""
-          if os.path.exists(summary_env):
-              with open(summary_env, "r") as f:
-                  content = f.read()
-          
-          with open(summary_env, "w") as f:
-              f.write(content)
               f.writelines("## Python modules:\n")
-              for package in pkg_resources.working_set:
-                  f.writelines(f"`{package.key}/{package.version}`\n")
+              for dep_name, dep_info in PythonInstalls.items():
+                  f.writelines(f"`{dep_name} {dep_info['version']}`\n")
 
       - name: Create PFX certificate from BASE64_PFX_CONTENT secret
         id: create-pfx
diff --git a/.gitignore b/.gitignore
index f1a72d342e..0290869b41 100644
--- a/.gitignore
+++ b/.gitignore
@@ -101,7 +101,6 @@ graph_info.json
 Ultimaker-Cura.spec
 .run/
 /printer-linter/src/printerlinter.egg-info/
-/resources/qml/Dialogs/AboutDialogVersionsList.qml
 /plugins/CuraEngineGradualFlow
 /resources/bundled_packages/bundled_*.json
 curaengine_plugin_gradual_flow
diff --git a/AboutDialogVersionsList.qml.jinja b/AboutDialogVersionsList.qml.jinja
deleted file mode 100644
index 0503469660..0000000000
--- a/AboutDialogVersionsList.qml.jinja
+++ /dev/null
@@ -1,61 +0,0 @@
-import QtQuick 2.2
-import QtQuick.Controls 2.9
-
-import UM 1.6 as UM
-import Cura 1.5 as Cura
-
-
-ListView
-{
-    id: projectBuildInfoList
-    visible: false
-    anchors.top: creditsNotes.bottom
-    anchors.topMargin: UM.Theme.getSize("default_margin").height
-    width: parent.width
-    height: base.height - y - (2 * UM.Theme.getSize("default_margin").height + closeButton.height)
-
-    ScrollBar.vertical: UM.ScrollBar
-    {
-        id: projectBuildInfoListScrollBar
-    }
-
-    delegate: Row
-    {
-        spacing: UM.Theme.getSize("narrow_margin").width
-        UM.Label
-        {
-            text: (model.name)
-            width: (projectBuildInfoList.width* 0.4) | 0
-            elide: Text.ElideRight
-        }
-        UM.Label
-        {
-            text: (model.version)
-            width: (projectBuildInfoList.width *0.6) | 0
-            elide: Text.ElideRight
-        }
-
-    }
-    model: ListModel
-    {
-        id: developerInfo
-    }
-    Component.onCompleted:
-    {
-        var conan_installs = {{ conan_installs }};
-        var python_installs = {{ python_installs }};
-        developerInfo.append({ name : "<H1>Conan Installs</H1>", version : '' });
-        for (var n in conan_installs)
-        {
-            developerInfo.append({ name : conan_installs[n][0], version : conan_installs[n][1] });
-        }
-        developerInfo.append({ name : '', version : '' });
-        developerInfo.append({ name : "<H1>Python Installs</H1>", version : '' });
-        for (var n in python_installs)
-        {
-            developerInfo.append({ name : python_installs[n][0], version : python_installs[n][1] });
-        }
-
-    }
-}
-
diff --git a/CuraVersion.py.jinja b/CuraVersion.py.jinja
index 87ef7d205d..690a1386d3 100644
--- a/CuraVersion.py.jinja
+++ b/CuraVersion.py.jinja
@@ -1,6 +1,8 @@
-# Copyright (c) 2022 UltiMaker
+# Copyright (c) 2023 UltiMaker
 # Cura is released under the terms of the LGPLv3 or higher.
 
+from pkg_resources import working_set
+
 CuraAppName = "{{ cura_app_name }}"
 CuraAppDisplayName = "{{ cura_app_display_name  }}"
 CuraVersion = "{{ cura_version }}"
@@ -12,3 +14,6 @@ CuraCloudAccountAPIRoot = "{{ cura_cloud_account_api_root }}"
 CuraMarketplaceRoot = "{{ cura_marketplace_root }}"
 CuraDigitalFactoryURL = "{{ cura_digital_factory_url }}"
 CuraLatestURL = "{{ cura_latest_url }}"
+
+ConanInstalls = {{ conan_installs }}
+PythonInstalls = {package.key: {'version': package.version} for package in working_set}
\ No newline at end of file
diff --git a/conandata.yml b/conandata.yml
index c5ca663f91..c027bde567 100644
--- a/conandata.yml
+++ b/conandata.yml
@@ -86,6 +86,7 @@ pyinstaller:
     hiddenimports:
         - "pySavitar"
         - "pyArcus"
+        - "pyDulcificum"
         - "pynest2d"
         - "PyQt6"
         - "PyQt6.QtNetwork"
diff --git a/conanfile.py b/conanfile.py
index 5c331ff6ca..1ce2b1d369 100644
--- a/conanfile.py
+++ b/conanfile.py
@@ -34,7 +34,8 @@ class CuraConan(ConanFile):
         "cloud_api_version": "ANY",
         "display_name": "ANY",  # TODO: should this be an option??
         "cura_debug_mode": [True, False],  # FIXME: Use profiles
-        "internal": [True, False]
+        "internal": [True, False],
+        "enable_i18n": [True, False],
     }
     default_options = {
         "enterprise": "False",
@@ -44,6 +45,7 @@ class CuraConan(ConanFile):
         "display_name": "UltiMaker Cura",
         "cura_debug_mode": False,  # Not yet implemented
         "internal": False,
+        "enable_i18n": False,
     }
 
     def set_version(self):
@@ -65,6 +67,8 @@ class CuraConan(ConanFile):
         self._cura_env = Environment()
         self._cura_env.define("QML2_IMPORT_PATH", str(self._site_packages.joinpath("PyQt6", "Qt6", "qml")))
         self._cura_env.define("QT_PLUGIN_PATH", str(self._site_packages.joinpath("PyQt6", "Qt6", "plugins")))
+        if not self.in_local_cache:
+            self._cura_env.define(  "CURA_DATA_ROOT", str(self._share_dir.joinpath("cura")))
 
         if self.settings.os == "Linux":
             self._cura_env.define("QT_QPA_FONTDIR", "/usr/share/fonts")
@@ -137,36 +141,16 @@ class CuraConan(ConanFile):
             return "'x86_64'"
         return "None"
 
-    def _generate_about_versions(self, location):
-        with open(os.path.join(self.recipe_folder, "AboutDialogVersionsList.qml.jinja"), "r") as f:
-            cura_version_py = Template(f.read())
-
-        conan_installs = []
-        python_installs = []
-
-        # list  of conan installs
-        for _, dependency in self.dependencies.host.items():
-            conan_installs.append([dependency.ref.name,dependency.ref.version])
-
-        #list of python installs
-        outer = '"' if self.settings.os == "Windows" else "'"
-        inner = "'" if self.settings.os == "Windows" else '"'
-        python_ins_cmd = f"python -c {outer}import pkg_resources; print({inner};{inner}.join([(s.key+{inner},{inner}+ s.version) for s in pkg_resources.working_set])){outer}"
-        from six import StringIO
-        buffer = StringIO()
-        self.run(python_ins_cmd, run_environment= True, env = "conanrun",  output=buffer)
-
-        packages = str(buffer.getvalue()).split("-----------------\n")
-        package = packages[1].strip('\r\n').split(";")
-        for pack in package:
-            python_installs.append(pack.split(","))
-
-        with open(os.path.join(location, "AboutDialogVersionsList.qml"), "w") as f:
-            f.write(cura_version_py.render(
-                conan_installs = conan_installs,
-                python_installs = python_installs
-            ))
+    def _conan_installs(self):
+        conan_installs = {}
 
+        # list of conan installs
+        for dependency in self.dependencies.host.values():
+            conan_installs[dependency.ref.name] = {
+                "version": dependency.ref.version,
+                "revision": dependency.ref.revision
+            }
+        return conan_installs
 
     def _generate_cura_version(self, location):
         with open(os.path.join(self.recipe_folder, "CuraVersion.py.jinja"), "r") as f:
@@ -192,11 +176,13 @@ class CuraConan(ConanFile):
                 cura_cloud_account_api_root = self.conan_data["urls"][self._urls]["cloud_account_api_root"],
                 cura_marketplace_root = self.conan_data["urls"][self._urls]["marketplace_root"],
                 cura_digital_factory_url = self.conan_data["urls"][self._urls]["digital_factory_url"],
-                cura_latest_url = self.conan_data["urls"][self._urls]["cura_latest_url"]))
+                cura_latest_url=self.conan_data["urls"][self._urls]["cura_latest_url"],
+                conan_installs=self._conan_installs(),
+            ))
 
     def _generate_pyinstaller_spec(self, location, entrypoint_location, icon_path, entitlements_file):
         pyinstaller_metadata = self.conan_data["pyinstaller"]
-        datas = [(str(self._base_dir.joinpath("conan_install_info.json")), ".")]
+        datas = []
         for data in pyinstaller_metadata["datas"].values():
             if not self.options.internal and data.get("internal", False):
                 continue
@@ -289,10 +275,15 @@ class CuraConan(ConanFile):
         copy(self, "requirements-ultimaker.txt", self.recipe_folder, self.export_sources_folder)
         copy(self, "cura_app.py", self.recipe_folder, self.export_sources_folder)
 
+    def config_options(self):
+        if self.settings.os == "Windows" and not self.conf.get("tools.microsoft.bash:path", check_type=str):
+            del self.options.enable_i18n
+
     def configure(self):
         self.options["pyarcus"].shared = True
         self.options["pysavitar"].shared = True
         self.options["pynest2d"].shared = True
+        self.options["dulcificum"].shared = self.settings.os != "Windows"
         self.options["cpython"].shared = True
         self.options["boost"].header_only = True
         if self.settings.os == "Linux":
@@ -305,9 +296,11 @@ class CuraConan(ConanFile):
 
     def requirements(self):
         self.requires("boost/1.82.0")
+        self.requires("fmt/9.0.0")
         self.requires("curaengine_grpc_definitions/(latest)@ultimaker/testing")
         self.requires("zlib/1.2.13")
         self.requires("pyarcus/5.3.0")
+        self.requires("dulcificum/(latest)@ultimaker/testing")
         self.requires("curaengine/(latest)@ultimaker/testing")
         self.requires("pysavitar/5.3.0")
         self.requires("pynest2d/5.3.0")
@@ -316,16 +309,14 @@ class CuraConan(ConanFile):
         self.requires("cura_binary_data/(latest)@ultimaker/testing")
         self.requires("cpython/3.10.4")
         if self.options.internal:
-            self.requires("cura_private_data/(latest)@internal/testing")
+            self.requires("cura_private_data/(latest)@internal/cura_10561")
             self.requires("fdm_materials/(latest)@internal/testing")
         else:
             self.requires("fdm_materials/(latest)@ultimaker/testing")
 
     def build_requirements(self):
-        if self.options.devtools:
-            if self.settings.os != "Windows" or self.conf.get("tools.microsoft.bash:path", check_type = str):
-                # FIXME: once m4, autoconf, automake are Conan V2 ready use self.win_bash and add gettext as base tool_requirement
-                self.tool_requires("gettext/0.21@ultimaker/testing", force_host_context = True)
+        if self.options.get_safe("enable_i18n", False):
+            self.tool_requires("gettext/0.21@ultimaker/testing", force_host_context = True)
 
     def layout(self):
         self.folders.source = "."
@@ -346,7 +337,6 @@ class CuraConan(ConanFile):
         vr.generate()
 
         self._generate_cura_version(os.path.join(self.source_folder, "cura"))
-        self._generate_about_versions(os.path.join(self.source_folder, "resources","qml", "Dialogs"))
 
         if not self.in_local_cache:
             # Copy CuraEngine.exe to bindirs of Virtual Python Environment
@@ -393,26 +383,24 @@ class CuraConan(ConanFile):
                                             icon_path = "'{}'".format(os.path.join(self.source_folder, "packaging", self.conan_data["pyinstaller"]["icon"][str(self.settings.os)])).replace("\\", "\\\\"),
                                             entitlements_file = entitlements_file if self.settings.os == "Macos" else "None")
 
+        if self.options.get_safe("enable_i18n", False):
             # Update the po and pot files
-            if self.settings.os != "Windows" or self.conf.get("tools.microsoft.bash:path", check_type=str):
-                vb = VirtualBuildEnv(self)
-                vb.generate()
+            vb = VirtualBuildEnv(self)
+            vb.generate()
 
-                # # FIXME: once m4, autoconf, automake are Conan V2 ready use self.win_bash and add gettext as base tool_requirement
-                # cpp_info = self.dependencies["gettext"].cpp_info
-                # pot = self.python_requires["translationextractor"].module.ExtractTranslations(self, cpp_info.bindirs[0])
-                # pot.generate()
+            # # FIXME: once m4, autoconf, automake are Conan V2 ready use self.win_bash and add gettext as base tool_requirement
+            cpp_info = self.dependencies["gettext"].cpp_info
+            pot = self.python_requires["translationextractor"].module.ExtractTranslations(self, cpp_info.bindirs[0])
+            pot.generate()
 
     def build(self):
-        if self.options.devtools:
-            if self.settings.os != "Windows" or self.conf.get("tools.microsoft.bash:path", check_type = str):
-                # FIXME: once m4, autoconf, automake are Conan V2 ready use self.win_bash and add gettext as base tool_requirement
-                for po_file in self.source_path.joinpath("resources", "i18n").glob("**/*.po"):
-                    mo_file = Path(self.build_folder, po_file.with_suffix('.mo').relative_to(self.source_path))
-                    mo_file = mo_file.parent.joinpath("LC_MESSAGES", mo_file.name)
-                    mkdir(self, str(unix_path(self, Path(mo_file).parent)))
-                    cpp_info = self.dependencies["gettext"].cpp_info
-                    self.run(f"{cpp_info.bindirs[0]}/msgfmt {po_file} -o {mo_file} -f", env="conanbuild", ignore_errors=True)
+        if self.options.get_safe("enable_i18n", False):
+            for po_file in self.source_path.joinpath("resources", "i18n").glob("**/*.po"):
+                mo_file = Path(self.build_folder, po_file.with_suffix('.mo').relative_to(self.source_path))
+                mo_file = mo_file.parent.joinpath("LC_MESSAGES", mo_file.name)
+                mkdir(self, str(unix_path(self, Path(mo_file).parent)))
+                cpp_info = self.dependencies["gettext"].cpp_info
+                self.run(f"{cpp_info.bindirs[0]}/msgfmt {po_file} -o {mo_file} -f", env="conanbuild", ignore_errors=True)
 
     def deploy(self):
         copy(self, "*", os.path.join(self.package_folder, self.cpp.package.resdirs[2]), os.path.join(self.install_folder, "packaging"), keep_path = True)
@@ -451,7 +439,6 @@ echo "CURA_APP_NAME={{ cura_app_name }}" >> ${{ env_prefix }}GITHUB_ENV
         save(self, os.path.join(self._script_dir, f"activate_github_actions_version_env{ext}"), activate_github_actions_version_env)
 
         self._generate_cura_version(os.path.join(self._site_packages, "cura"))
-        self._generate_about_versions(str(self._share_dir.joinpath("cura", "resources", "qml", "Dialogs")))
 
         entitlements_file = "'{}'".format(Path(self.cpp_info.res_paths[2], "MacOS", "cura.entitlements"))
         self._generate_pyinstaller_spec(location = self._base_dir,
diff --git a/cura/ApplicationMetadata.py b/cura/ApplicationMetadata.py
index 96cfa6c64d..9d399e7ad8 100644
--- a/cura/ApplicationMetadata.py
+++ b/cura/ApplicationMetadata.py
@@ -1,4 +1,4 @@
-#  Copyright (c) 2022 UltiMaker
+#  Copyright (c) 2023 UltiMaker
 #  Cura is released under the terms of the LGPLv3 or higher.
 
 # ---------
@@ -69,13 +69,25 @@ try:
 except ImportError:
     CuraAppDisplayName = DEFAULT_CURA_DISPLAY_NAME
 
-DEPENDENCY_INFO = {}
+
 try:
-    from pathlib import Path
-    conan_install_info = Path(__file__).parent.parent.joinpath("conan_install_info.json")
-    if conan_install_info.exists():
-        import json
-        with open(conan_install_info, "r") as f:
-            DEPENDENCY_INFO = json.loads(f.read())
-except:
-    pass
+    from cura.CuraVersion import ConanInstalls
+
+    if type(ConanInstalls) == dict:
+        CONAN_INSTALLS = ConanInstalls
+    else:
+        CONAN_INSTALLS = {}
+
+except ImportError:
+    CONAN_INSTALLS = {}
+
+try:
+    from cura.CuraVersion import PythonInstalls
+
+    if type(PythonInstalls) == dict:
+        PYTHON_INSTALLS = PythonInstalls
+    else:
+        PYTHON_INSTALLS = {}
+
+except ImportError:
+    PYTHON_INSTALLS = {}
diff --git a/cura/CuraApplication.py b/cura/CuraApplication.py
index e075fe92f5..722a728863 100755
--- a/cura/CuraApplication.py
+++ b/cura/CuraApplication.py
@@ -6,6 +6,7 @@ import sys
 import tempfile
 import time
 import platform
+from pathlib import Path
 from typing import cast, TYPE_CHECKING, Optional, Callable, List, Any, Dict
 
 import numpy
@@ -269,6 +270,9 @@ class CuraApplication(QtApplication):
         CentralFileStorage.setIsEnterprise(ApplicationMetadata.IsEnterpriseVersion)
         Resources.setIsEnterprise(ApplicationMetadata.IsEnterpriseVersion)
 
+        self._conan_installs = ApplicationMetadata.CONAN_INSTALLS
+        self._python_installs = ApplicationMetadata.PYTHON_INSTALLS
+
     @pyqtProperty(str, constant=True)
     def ultimakerCloudApiRootUrl(self) -> str:
         return UltimakerCloudConstants.CuraCloudAPIRoot
@@ -363,6 +367,10 @@ class CuraApplication(QtApplication):
 
         Resources.addSecureSearchPath(os.path.join(self._app_install_dir, "share", "cura", "resources"))
         if not hasattr(sys, "frozen"):
+            cura_data_root = os.environ.get('CURA_DATA_ROOT', None)
+            if cura_data_root:
+                Resources.addSearchPath(str(Path(cura_data_root).joinpath("resources")))
+
             Resources.addSearchPath(os.path.join(os.path.abspath(os.path.dirname(__file__)), "..", "resources"))
 
             # local Conan cache
@@ -851,11 +859,8 @@ class CuraApplication(QtApplication):
 
         self._log_hardware_info()
 
-        if len(ApplicationMetadata.DEPENDENCY_INFO) > 0:
-            Logger.debug("Using Conan managed dependencies: " + ", ".join(
-                [dep["recipe"]["id"] for dep in ApplicationMetadata.DEPENDENCY_INFO["installed"] if dep["recipe"]["version"] != "latest"]))
-        else:
-            Logger.warning("Could not find conan_install_info.json")
+        Logger.debug("Using conan dependencies: {}", str(self.conanInstalls))
+        Logger.debug("Using python dependencies: {}", str(self.pythonInstalls))
 
         Logger.log("i", "Initializing machine error checker")
         self._machine_error_checker = MachineErrorChecker(self)
@@ -2130,3 +2135,11 @@ class CuraApplication(QtApplication):
     @pyqtProperty(bool, constant=True)
     def isEnterprise(self) -> bool:
         return ApplicationMetadata.IsEnterpriseVersion
+
+    @pyqtProperty("QVariant", constant=True)
+    def conanInstalls(self) -> Dict[str, Dict[str, str]]:
+        return self._conan_installs
+
+    @pyqtProperty("QVariant", constant=True)
+    def pythonInstalls(self) -> Dict[str, Dict[str, str]]:
+        return self._python_installs
diff --git a/cura/Snapshot.py b/cura/Snapshot.py
index 1266d3dcb1..e493f0e79c 100644
--- a/cura/Snapshot.py
+++ b/cura/Snapshot.py
@@ -1,7 +1,9 @@
-# Copyright (c) 2021 Ultimaker B.V.
+# Copyright (c) 2023 UltiMaker
 # Cura is released under the terms of the LGPLv3 or higher.
 import numpy
 
+from typing import Optional
+
 from PyQt6 import QtCore
 from PyQt6.QtCore import QCoreApplication
 from PyQt6.QtGui import QImage
@@ -10,11 +12,13 @@ from UM.Logger import Logger
 from cura.PreviewPass import PreviewPass
 
 from UM.Application import Application
+from UM.Math.AxisAlignedBox import AxisAlignedBox
 from UM.Math.Matrix import Matrix
 from UM.Math.Vector import Vector
 from UM.Scene.Camera import Camera
 from UM.Scene.Iterator.DepthFirstIterator import DepthFirstIterator
-
+from UM.Scene.SceneNode import SceneNode
+from UM.Qt.QtRenderer import QtRenderer
 
 class Snapshot:
     @staticmethod
@@ -32,6 +36,87 @@ class Snapshot:
 
         return min_x, max_x, min_y, max_y
 
+    @staticmethod
+    def isometricSnapshot(width: int = 300, height: int = 300) -> Optional[QImage]:
+        """Create an isometric snapshot of the scene."""
+
+        root = Application.getInstance().getController().getScene().getRoot()
+
+        # the direction the camera is looking at to create the isometric view
+        iso_view_dir = Vector(-1, -1, -1).normalized()
+
+        bounds = Snapshot.nodeBounds(root)
+        if bounds is None:
+            Logger.log("w", "There appears to be nothing to render")
+            return None
+
+        camera = Camera("snapshot")
+
+        # find local x and y directional vectors of the camera
+        tangent_space_x_direction = iso_view_dir.cross(Vector.Unit_Y).normalized()
+        tangent_space_y_direction = tangent_space_x_direction.cross(iso_view_dir).normalized()
+
+        # find extreme screen space coords of the scene
+        x_points = [p.dot(tangent_space_x_direction) for p in bounds.points]
+        y_points = [p.dot(tangent_space_y_direction) for p in bounds.points]
+        min_x = min(x_points)
+        max_x = max(x_points)
+        min_y = min(y_points)
+        max_y = max(y_points)
+        camera_width = max_x - min_x
+        camera_height = max_y - min_y
+
+        if camera_width == 0 or camera_height == 0:
+            Logger.log("w", "There appears to be nothing to render")
+            return None
+
+        # increase either width or height to match the aspect ratio of the image
+        if camera_width / camera_height > width / height:
+            camera_height = camera_width * height / width
+        else:
+            camera_width = camera_height * width / height
+
+        # Configure camera for isometric view
+        ortho_matrix = Matrix()
+        ortho_matrix.setOrtho(
+            -camera_width / 2,
+            camera_width / 2,
+            -camera_height / 2,
+            camera_height / 2,
+            -10000,
+            10000
+        )
+        camera.setPerspective(False)
+        camera.setProjectionMatrix(ortho_matrix)
+        camera.setPosition(bounds.center)
+        camera.lookAt(bounds.center + iso_view_dir)
+
+        # Render the scene
+        renderer = QtRenderer()
+        render_pass = PreviewPass(width, height)
+        renderer.setViewportSize(width, height)
+        renderer.setWindowSize(width, height)
+        render_pass.setCamera(camera)
+        renderer.addRenderPass(render_pass)
+        renderer.beginRendering()
+        renderer.render()
+
+        return render_pass.getOutput()
+
+    @staticmethod
+    def nodeBounds(root_node: SceneNode) -> Optional[AxisAlignedBox]:
+        axis_aligned_box = None
+        for node in DepthFirstIterator(root_node):
+            if not getattr(node, "_outside_buildarea", False):
+                if node.callDecoration(
+                        "isSliceable") and node.getMeshData() and node.isVisible() and not node.callDecoration(
+                        "isNonThumbnailVisibleMesh"):
+                    if axis_aligned_box is None:
+                        axis_aligned_box = node.getBoundingBox()
+                    else:
+                        axis_aligned_box = axis_aligned_box + node.getBoundingBox()
+        return axis_aligned_box
+
     @staticmethod
     def snapshot(width = 300, height = 300):
         """Return a QImage of the scene
@@ -55,14 +140,7 @@ class Snapshot:
         camera = Camera("snapshot", root)
 
         # determine zoom and look at
-        bbox = None
-        for node in DepthFirstIterator(root):
-            if not getattr(node, "_outside_buildarea", False):
-                if node.callDecoration("isSliceable") and node.getMeshData() and node.isVisible() and not node.callDecoration("isNonThumbnailVisibleMesh"):
-                    if bbox is None:
-                        bbox = node.getBoundingBox()
-                    else:
-                        bbox = bbox + node.getBoundingBox()
+        bbox = Snapshot.nodeBounds(root)
         # If there is no bounding box, it means that there is no model in the buildplate
         if bbox is None:
             Logger.log("w", "Unable to create snapshot as we seem to have an empty buildplate")
diff --git a/plugins/MakerbotWriter/MakerbotWriter.py b/plugins/MakerbotWriter/MakerbotWriter.py
new file mode 100644
index 0000000000..dde1541cfe
--- /dev/null
+++ b/plugins/MakerbotWriter/MakerbotWriter.py
@@ -0,0 +1,304 @@
+# Copyright (c) 2023 UltiMaker
+# Cura is released under the terms of the LGPLv3 or higher.
+
+from io import StringIO, BufferedIOBase
+import json
+from typing import cast, List, Optional, Dict
+from zipfile import BadZipFile, ZipFile, ZIP_DEFLATED
+import pyDulcificum as du
+
+from PyQt6.QtCore import QBuffer
+
+from UM.Logger import Logger
+from UM.Math.AxisAlignedBox import AxisAlignedBox
+from UM.Mesh.MeshWriter import MeshWriter
+from UM.MimeTypeDatabase import MimeTypeDatabase, MimeType
+from UM.PluginRegistry import PluginRegistry
+from UM.Scene.SceneNode import SceneNode
+from UM.Scene.Iterator.DepthFirstIterator import DepthFirstIterator
+from UM.i18n import i18nCatalog
+
+from cura.CuraApplication import CuraApplication
+from cura.Snapshot import Snapshot
+from cura.Utils.Threading import call_on_qt_thread
+from cura.CuraVersion import ConanInstalls
+
+catalog = i18nCatalog("cura")
+
+
+class MakerbotWriter(MeshWriter):
+    """A file writer that writes '.makerbot' files."""
+
+    def __init__(self) -> None:
+        super().__init__(add_to_recent_files=False)
+        Logger.info(f"Using PyDulcificum: {du.__version__}")
+        MimeTypeDatabase.addMimeType(
+            MimeType(
+                name="application/x-makerbot",
+                comment="Makerbot Toolpath Package",
+                suffixes=["makerbot"]
+            )
+        )
+
+    _PNG_FORMATS = [
+        {"prefix": "isometric_thumbnail", "width": 120, "height": 120},
+        {"prefix": "isometric_thumbnail", "width": 320, "height": 320},
+        {"prefix": "isometric_thumbnail", "width": 640, "height": 640},
+        {"prefix": "thumbnail", "width": 140, "height": 106},
+        {"prefix": "thumbnail", "width": 212, "height": 300},
+        {"prefix": "thumbnail", "width": 960, "height": 1460},
+        {"prefix": "thumbnail", "width": 90, "height": 90},
+    ]
+    _META_VERSION = "3.0.0"
+    _PRINT_NAME_MAP = {
+        "Makerbot Method": "fire_e",
+        "Makerbot Method X": "lava_f",
+        "Makerbot Method XL": "magma_10",
+    }
+    _EXTRUDER_NAME_MAP = {
+        "1XA": "mk14_hot",
+        "2XA": "mk14_hot_s",
+        "1C": "mk14_c",
+        "1A": "mk14",
+        "2A": "mk14_s",
+    }
+    _MATERIAL_MAP = {"2780b345-577b-4a24-a2c5-12e6aad3e690": "abs",
+                     "88c8919c-6a09-471a-b7b6-e801263d862d": "abs-wss1",
+                     "416eead4-0d8e-4f0b-8bfc-a91a519befa5": "asa",
+                     "85bbae0e-938d-46fb-989f-c9b3689dc4f0": "nylon-cf",
+                     "283d439a-3490-4481-920c-c51d8cdecf9c": "nylon",
+                     "62414577-94d1-490d-b1e4-7ef3ec40db02": "pc",
+                     "69386c85-5b6c-421a-bec5-aeb1fb33f060": "petg",
+                     "0ff92885-617b-4144-a03c-9989872454bc": "pla",
+                     "a4255da2-cb2a-4042-be49-4a83957a2f9a": "pva",
+                     "a140ef8f-4f26-4e73-abe0-cfc29d6d1024": "wss1",
+                     "77873465-83a9-4283-bc44-4e542b8eb3eb": "sr30",
+                     "96fca5d9-0371-4516-9e96-8e8182677f3c": "im-pla",
+                     "9f52c514-bb53-46a6-8c0c-d507cd6ee742": "abs",
+                     "0f9a2a91-f9d6-4b6b-bd9b-a120a29391be": "abs",
+                     "d3e972f2-68c0-4d2f-8cfd-91028dfc3381": "abs",
+                     "495a0ce5-9daf-4a16-b7b2-06856d82394d": "abs-cf",
+                     "cb76bd6e-91fd-480c-a191-12301712ec77": "abs-wss1",
+                     "a017777e-3f37-4d89-a96c-dc71219aac77": "abs-wss1",
+                     "4d96000d-66de-4d54-a580-91827dcfd28f": "abs-wss1",
+                     "0ecb0e1a-6a66-49fb-b9ea-61a8924e0cf5": "asa",
+                     "efebc2ea-2381-4937-926f-e824524524a5": "asa",
+                     "b0199512-5714-4951-af85-be19693430f8": "asa",
+                     "b9f55a0a-a2b6-4b8d-8d48-07802c575bd1": "pla",
+                     "c439d884-9cdc-4296-a12c-1bacae01003f": "pla",
+                     "16a723e3-44df-49f4-82ec-2a1173c1e7d9": "pla",
+                     "74d0f5c2-fdfd-4c56-baf1-ff5fa92d177e": "pla",
+                     "64dcb783-470d-4400-91b1-7001652f20da": "pla",
+                     "3a1b479b-899c-46eb-a2ea-67050d1a4937": "pla",
+                     "4708ac49-5dde-4cc2-8c0a-87425a92c2b3": "pla",
+                     "4b560eda-1719-407f-b085-1c2c1fc8ffc1": "pla",
+                     "e10a287d-0067-4a58-9083-b7054f479991": "im-pla",
+                     "01a6b5b0-fab1-420c-a5d9-31713cbeb404": "im-pla",
+                     "f65df4ad-a027-4a48-a51d-975cc8b87041": "im-pla",
+                     "f48739f8-6d96-4a3d-9a2e-8505a47e2e35": "im-pla",
+                     "5c7d7672-e885-4452-9a78-8ba90ec79937": "petg",
+                     "91e05a6e-2f5b-4964-b973-d83b5afe6db4": "petg",
+                     "bdc7dd03-bf38-48ee-aeca-c3e11cee799e": "petg",
+                     "54f66c89-998d-4070-aa60-1cb0fd887518": "nylon",
+                     "002c84b3-84ac-4b5a-b57d-fe1f555a6351": "pva",
+                     "e4da5fcb-f62d-48a2-aaef-0b645aa6973b": "wss1",
+                     "77f06146-6569-437d-8380-9edb0d635a32": "sr30"}
+
+    # must be called from the main thread because of OpenGL
+    @staticmethod
+    @call_on_qt_thread
+    def _createThumbnail(width: int, height: int) -> Optional[QBuffer]:
+        if not CuraApplication.getInstance().isVisible:
+            Logger.warning("Can't create snapshot when renderer not initialized.")
+            return
+        try:
+            snapshot = Snapshot.isometricSnapshot(width, height)
+        except:
+            Logger.logException("w", "Failed to create snapshot image")
+            return
+
+        thumbnail_buffer = QBuffer()
+        thumbnail_buffer.open(QBuffer.OpenModeFlag.WriteOnly)
+
+        snapshot.save(thumbnail_buffer, "PNG")
+
+        return thumbnail_buffer
+
+    def write(self, stream: BufferedIOBase, nodes: List[SceneNode], mode=MeshWriter.OutputMode.BinaryMode) -> bool:
+        if mode != MeshWriter.OutputMode.BinaryMode:
+            Logger.log("e", "MakerbotWriter does not support text mode.")
+            self.setInformation(catalog.i18nc("@error:not supported", "MakerbotWriter does not support text mode."))
+            return False
+
+        # The GCodeWriter plugin is always available since it is in the "required" list of plugins.
+        gcode_writer = PluginRegistry.getInstance().getPluginObject("GCodeWriter")
+
+        if gcode_writer is None:
+            Logger.log("e", "Could not find the GCodeWriter plugin, is it disabled?.")
+            self.setInformation(
+                catalog.i18nc("@error:load", "Could not load GCodeWriter plugin. Try to re-enable the plugin."))
+            return False
+
+        gcode_writer = cast(MeshWriter, gcode_writer)
+
+        gcode_text_io = StringIO()
+        success = gcode_writer.write(gcode_text_io, None)
+
+        # Writing the g-code failed. Then I can also not write the gzipped g-code.
+        if not success:
+            self.setInformation(gcode_writer.getInformation())
+            return False
+
+        json_toolpaths = du.gcode_2_miracle_jtp(gcode_text_io.getvalue())
+        metadata = self._getMeta(nodes)
+
+        png_files = []
+        for png_format in self._PNG_FORMATS:
+            width, height, prefix = png_format["width"], png_format["height"], png_format["prefix"]
+            thumbnail_buffer = self._createThumbnail(width, height)
+            if thumbnail_buffer is None:
+                Logger.warning(f"Could not create thumbnail of size {width}x{height}.")
+                continue
+            png_files.append({
+                "file": f"{prefix}_{width}x{height}.png",
+                "data": thumbnail_buffer.data(),
+            })
+
+        try:
+            with ZipFile(stream, "w", compression=ZIP_DEFLATED) as zip_stream:
+                zip_stream.writestr("meta.json", json.dumps(metadata, indent=4))
+                zip_stream.writestr("print.jsontoolpath", json_toolpaths)
+                for png_file in png_files:
+                    file, data = png_file["file"], png_file["data"]
+                    zip_stream.writestr(file, data)
+        except (IOError, OSError, BadZipFile) as ex:
+            Logger.log("e", f"Could not write to (.makerbot) file because: '{ex}'.")
+            self.setInformation(catalog.i18nc("@error", "MakerbotWriter could not save to the designated path."))
+            return False
+
+        return True
+
+    def _getMeta(self, root_nodes: List[SceneNode]) -> Dict[str, any]:
+        application = CuraApplication.getInstance()
+        machine_manager = application.getMachineManager()
+        global_stack = machine_manager.activeMachine
+        extruders = global_stack.extruderList
+
+        nodes = []
+        for root_node in root_nodes:
+            for node in DepthFirstIterator(root_node):
+                if not getattr(node, "_outside_buildarea", False):
+                    if node.callDecoration(
+                            "isSliceable") and node.getMeshData() and node.isVisible() and not node.callDecoration(
+                            "isNonThumbnailVisibleMesh"):
+                        nodes.append(node)
+
+        meta = dict()
+
+        meta["bot_type"] = MakerbotWriter._PRINT_NAME_MAP.get((name := global_stack.definition.name), name)
+
+        bounds: Optional[AxisAlignedBox] = None
+        for node in nodes:
+            node_bounds = node.getBoundingBox()
+            if node_bounds is None:
+                continue
+            if bounds is None:
+                bounds = node_bounds
+            else:
+                bounds = bounds + node_bounds
+
+        if bounds is not None:
+            meta["bounding_box"] = {
+                "x_min": bounds.left,
+                "x_max": bounds.right,
+                "y_min": bounds.back,
+                "y_max": bounds.front,
+                "z_min": bounds.bottom,
+                "z_max": bounds.top,
+            }
+
+        material_bed_temperature = global_stack.getProperty("material_bed_temperature", "value")
+        meta["platform_temperature"] = material_bed_temperature
+
+        build_volume_temperature = global_stack.getProperty("build_volume_temperature", "value")
+        meta["build_plane_temperature"] = build_volume_temperature
+
+        print_information = application.getPrintInformation()
+
+        meta["commanded_duration_s"] = int(print_information.currentPrintTime)
+        meta["duration_s"] = int(print_information.currentPrintTime)
+
+        material_lengths = list(map(meterToMillimeter, print_information.materialLengths))
+        meta["extrusion_distance_mm"] = material_lengths[0]
+        meta["extrusion_distances_mm"] = material_lengths
+
+        meta["extrusion_mass_g"] = print_information.materialWeights[0]
+        meta["extrusion_masses_g"] = print_information.materialWeights
+
+        meta["uuid"] = print_information.slice_uuid
+
+        materials = []
+        for extruder in extruders:
+            guid = extruder.material.getMetaData().get("GUID")
+            material_name = extruder.material.getMetaData().get("material")
+            material = self._MATERIAL_MAP.get(guid, material_name)
+            materials.append(material)
+
+        meta["material"] = materials[0]
+        meta["materials"] = materials
+
+        materials_temps = [extruder.getProperty("default_material_print_temperature", "value") for extruder in
+                           extruders]
+        meta["extruder_temperature"] = materials_temps[0]
+        meta["extruder_temperatures"] = materials_temps
+
+        meta["model_counts"] = [{"count": 1, "name": node.getName()} for node in nodes]
+
+        tool_types = [MakerbotWriter._EXTRUDER_NAME_MAP.get((name := extruder.variant.getName()), name) for extruder in
+                      extruders]
+        meta["tool_type"] = tool_types[0]
+        meta["tool_types"] = tool_types
+
+        meta["version"] = MakerbotWriter._META_VERSION
+
+        meta["preferences"] = dict()
+        for node in nodes:
+            bounds = node.getBoundingBox()
+            meta["preferences"][str(node.getName())] = {
+                "machineBounds": [bounds.right, bounds.back, bounds.left, bounds.front] if bounds is not None else None,
+                "printMode": CuraApplication.getInstance().getIntentManager().currentIntentCategory,
+            }
+
+        meta["miracle_config"] = {"gaggles": {str(node.getName()): {} for node in nodes}}
+
+        cura_engine_info = ConanInstalls.get("curaengine", {"version": "unknown", "revision": "unknown"})
+        meta["curaengine_version"] = cura_engine_info["version"]
+        meta["curaengine_commit_hash"] = cura_engine_info["revision"]
+
+        dulcificum_info = ConanInstalls.get("dulcificum", {"version": "unknown", "revision": "unknown"})
+        meta["dulcificum_version"] = dulcificum_info["version"]
+        meta["dulcificum_commit_hash"] = dulcificum_info["revision"]
+
+        meta["makerbot_writer_version"] = self.getVersion()
+        meta["pyDulcificum_version"] = du.__version__
+
+        # Add engine plugin information to the metadata
+        for name, package_info in ConanInstalls.items():
+            if not name.startswith("curaengine_"):
+                continue
+            meta[f"{name}_version"] = package_info["version"]
+            meta[f"{name}_commit_hash"] = package_info["revision"]
+
+        # TODO add the following instructions
+        # num_tool_changes
+        # num_z_layers
+        # num_z_transitions
+        # platform_temperature
+        # total_commands
+
+        return meta
+
+
+def meterToMillimeter(value: float) -> float:
+    """Converts a value in meters to millimeters."""
+    return value * 1000.0
diff --git a/plugins/MakerbotWriter/__init__.py b/plugins/MakerbotWriter/__init__.py
new file mode 100644
index 0000000000..ede2435c4f
--- /dev/null
+++ b/plugins/MakerbotWriter/__init__.py
@@ -0,0 +1,28 @@
+# Copyright (c) 2023 UltiMaker
+# Cura is released under the terms of the LGPLv3 or higher.
+
+from UM.i18n import i18nCatalog
+
+from . import MakerbotWriter
+
+catalog = i18nCatalog("cura")
+
+
+def getMetaData():
+    file_extension = "makerbot"
+    return {
+        "mesh_writer": {
+            "output": [{
+                "extension": file_extension,
+                "description": catalog.i18nc("@item:inlistbox", "Makerbot Printfile"),
+                "mime_type": "application/x-makerbot",
+                "mode": MakerbotWriter.MakerbotWriter.OutputMode.BinaryMode,
+            }],
+        }
+    }
+
+
+def register(app):
+    return {
+        "mesh_writer": MakerbotWriter.MakerbotWriter(),
+    }
diff --git a/plugins/MakerbotWriter/plugin.json b/plugins/MakerbotWriter/plugin.json
new file mode 100644
index 0000000000..f2b875bb54
--- /dev/null
+++ b/plugins/MakerbotWriter/plugin.json
@@ -0,0 +1,13 @@
+{
+  "name": "Makerbot Printfile Writer",
+  "author": "UltiMaker",
+  "version": "0.1.0",
+  "description": "Provides support for writing MakerBot Format Packages.",
+  "api": 8,
+  "supported_sdk_versions": [
+    "8.0.0",
+    "8.1.0",
+    "8.2.0"
+  ],
+  "i18n-catalog": "cura"
+}
diff --git a/resources/bundled_packages/cura.json b/resources/bundled_packages/cura.json
index b9667eea13..12ab219f30 100644
--- a/resources/bundled_packages/cura.json
+++ b/resources/bundled_packages/cura.json
@@ -305,6 +305,23 @@
             }
         }
     },
+    "MakerbotWriter": {
+        "package_info": {
+            "package_id": "MakerbotWriter",
+            "package_type": "plugin",
+            "display_name": "Makerbot Printfile Writer",
+            "description": "Provides support for writing MakerBot Format Packages.",
+            "package_version": "1.0.1",
+            "sdk_version": "8.5.0",
+            "website": "https://ultimaker.com",
+            "author": {
+                "author_id": "UltimakerPackages",
+                "display_name": "UltiMaker",
+                "email": "plugins@ultimaker.com",
+                "website": "https://ultimaker.com"
+            }
+        }
+    },
     "ModelChecker": {
         "package_info": {
             "package_id": "ModelChecker",
diff --git a/resources/qml/Dialogs/AboutDialog.qml b/resources/qml/Dialogs/AboutDialog.qml
index b0cd9d2ad3..d687f4a25d 100644
--- a/resources/qml/Dialogs/AboutDialog.qml
+++ b/resources/qml/Dialogs/AboutDialog.qml
@@ -1,19 +1,24 @@
-// Copyright (c) 2022 UltiMaker
+// Copyright (c) 2023 UltiMaker
 // Cura is released under the terms of the LGPLv3 or higher.
 
 import QtQuick 2.4
 import QtQuick.Controls 2.9
+import QtQuick.Layouts 1.3
 
 import UM 1.6 as UM
-import Cura 1.5 as Cura
+import Cura 1.6 as Cura
 
 UM.Dialog
 {
+    readonly property UM.I18nCatalog catalog: UM.I18nCatalog { name: "cura" }
+
     id: base
 
-    //: About dialog title
     title: catalog.i18nc("@title:window The argument is the application name.", "About %1").arg(CuraApplication.applicationDisplayName)
 
+    // Flag to toggle between main dependencies information and extensive dependencies information
+    property bool showDefaultDependencies: true
+
     minimumWidth: 500 * screenScaleFactor
     minimumHeight: 700 * screenScaleFactor
     width: minimumWidth
@@ -21,191 +26,255 @@ UM.Dialog
 
     backgroundColor: UM.Theme.getColor("main_background")
 
-
-    Rectangle
+    headerComponent: Rectangle
     {
-        id: header
-        width: parent.width + 2 * margin // margin from Dialog.qml
-        height: childrenRect.height + topPadding
-
-        anchors.top: parent.top
-        anchors.topMargin: -margin
-        anchors.horizontalCenter: parent.horizontalCenter
-
-        property real topPadding: UM.Theme.getSize("wide_margin").height
-
+        width: parent.width
+        height: logo.height + 2 * UM.Theme.getSize("wide_margin").height
         color: UM.Theme.getColor("main_window_header_background")
 
         Image
         {
             id: logo
-            width: (base.minimumWidth * 0.85) | 0
-            height: (width * (UM.Theme.getSize("logo").height / UM.Theme.getSize("logo").width)) | 0
+            width: Math.floor(base.width * 0.85)
+            height: Math.floor(width * UM.Theme.getSize("logo").height / UM.Theme.getSize("logo").width)
             source: UM.Theme.getImage("logo")
-            sourceSize.width: width
-            sourceSize.height: height
             fillMode: Image.PreserveAspectFit
 
-            anchors.top: parent.top
-            anchors.topMargin: parent.topPadding
-            anchors.horizontalCenter: parent.horizontalCenter
-
-            UM.I18nCatalog{id: catalog; name: "cura"}
-            MouseArea
-            {
-                anchors.fill: parent
-                onClicked:
-                {
-                    projectsList.visible = !projectsList.visible;
-                    projectBuildInfoList.visible = !projectBuildInfoList.visible;
-                }
-            }
+            anchors.centerIn: parent
         }
 
         UM.Label
         {
             id: version
-
             text: catalog.i18nc("@label","version: %1").arg(UM.Application.version)
             font: UM.Theme.getFont("large_bold")
             color: UM.Theme.getColor("button_text")
             anchors.right : logo.right
             anchors.top: logo.bottom
-            anchors.topMargin: (UM.Theme.getSize("default_margin").height / 2) | 0
+        }
+
+        MouseArea
+        {
+            anchors.fill: parent
+            onDoubleClicked: showDefaultDependencies = !showDefaultDependencies
         }
     }
 
-    UM.Label
+    // Reusable component to display a dependency
+    readonly property Component dependency_row: RowLayout
     {
-        id: description
-        width: parent.width
+        spacing: UM.Theme.getSize("default_margin").width
 
-        //: About dialog application description
-        text: catalog.i18nc("@label","End-to-end solution for fused filament 3D printing.")
-        font: UM.Theme.getFont("system")
-        wrapMode: Text.WordWrap
-        anchors.top: header.bottom
-        anchors.topMargin: UM.Theme.getSize("default_margin").height
-    }
-
-    UM.Label
-    {
-        id: creditsNotes
-        width: parent.width
-
-        //: About dialog application author note
-        text: catalog.i18nc("@info:credit","Cura is developed by UltiMaker in cooperation with the community.\nCura proudly uses the following open source projects:")
-        font: UM.Theme.getFont("system")
-        wrapMode: Text.WordWrap
-        anchors.top: description.bottom
-        anchors.topMargin: UM.Theme.getSize("default_margin").height
-    }
-
-    ListView
-    {
-        id: projectsList
-        anchors.top: creditsNotes.bottom
-        anchors.topMargin: UM.Theme.getSize("default_margin").height
-        width: parent.width
-        height: base.height - y - (2 * UM.Theme.getSize("default_margin").height + closeButton.height)
-
-        ScrollBar.vertical: UM.ScrollBar
+        UM.Label
         {
-            id: projectsListScrollBar
+            text: {
+                if (url !== "") {
+                    return `<a href="${url}">${name}</a>`;
+                } else {
+                    return name;
+                }
+            }
+            visible: text !== ""
+            Layout.fillWidth: true
+            Layout.preferredWidth: 1
+            onLinkActivated: Qt.openUrlExternally(url)
         }
 
-        delegate: Row
+        UM.Label
         {
-            spacing: UM.Theme.getSize("narrow_margin").width
+            text: description
+            visible: text !== ""
+            Layout.fillWidth: true
+            Layout.preferredWidth: 2
+        }
+
+        UM.Label
+        {
+            text: license
+            visible: text !== ""
+            Layout.fillWidth: true
+            Layout.preferredWidth: 1
+        }
+
+        UM.Label
+        {
+            text: version
+            visible: text !== ""
+            Layout.fillWidth: true
+            Layout.preferredWidth: 1
+        }
+    }
+
+    Flickable
+    {
+        anchors.fill: parent
+        ScrollBar.vertical: UM.ScrollBar {
+            visible: contentHeight > height
+        }
+        contentHeight: content.height
+        clip: true
+
+        Column
+        {
+            id: content
+            spacing: UM.Theme.getSize("default_margin").height
+            width: parent.width
+
             UM.Label
             {
-                text: "<a href='%1' title='%2'>%2</a>".arg(model.url).arg(model.name)
-                width: (projectsList.width * 0.25) | 0
-                elide: Text.ElideRight
-                onLinkActivated: Qt.openUrlExternally(link)
+                text: catalog.i18nc("@label", "End-to-end solution for fused filament 3D printing.")
+                font: UM.Theme.getFont("system")
+                wrapMode: Text.WordWrap
             }
+
             UM.Label
             {
-                text: model.description
-                elide: Text.ElideRight
-                width: ((projectsList.width * 0.6) | 0) - parent.spacing * 2 - projectsListScrollBar.width
+                text: catalog.i18nc("@info:credit", "Cura is developed by UltiMaker in cooperation with the community.\nCura proudly uses the following open source projects:")
+                font: UM.Theme.getFont("system")
+                wrapMode: Text.WordWrap
             }
+
+            Column
+            {
+                visible: showDefaultDependencies
+                width: parent.width
+
+                Repeater
+                {
+                    width: parent.width
+
+                    delegate: Loader
+                    {
+                        sourceComponent: dependency_row
+                        width: parent.width
+                        property string name: model.name
+                        property string description: model.description
+                        property string license: model.license
+                        property string url: model.url
+                        property string version: ""
+                    }
+
+                    model: ListModel
+                    {
+                        id: projectsModel
+                    }
+                    Component.onCompleted:
+                    {
+                        //Do NOT add dependencies of our dependencies here, nor CI-dependencies!
+                        //UltiMaker's own projects and forks.
+                        projectsModel.append({ name: "Cura", description: catalog.i18nc("@label Description for application component", "Graphical user interface"), license: "LGPLv3", url: "https://github.com/Ultimaker/Cura" });
+                        projectsModel.append({ name: "Uranium", description: catalog.i18nc("@label Description for application component", "Application framework"), license: "LGPLv3", url: "https://github.com/Ultimaker/Uranium" });
+                        projectsModel.append({ name: "CuraEngine", description: catalog.i18nc("@label Description for application component", "G-code generator"), license: "AGPLv3", url: "https://github.com/Ultimaker/CuraEngine" });
+                        projectsModel.append({ name: "libArcus", description: catalog.i18nc("@label Description for application component", "Interprocess communication library"), license: "LGPLv3", url: "https://github.com/Ultimaker/libArcus" });
+                        projectsModel.append({ name: "pynest2d", description: catalog.i18nc("@label Description for application component", "Python bindings for libnest2d"), license: "LGPL", url: "https://github.com/Ultimaker/pynest2d" });
+                        projectsModel.append({ name: "libnest2d", description: catalog.i18nc("@label Description for application component", "Polygon packing library, developed by Prusa Research"), license: "LGPL", url: "https://github.com/tamasmeszaros/libnest2d" });
+                        projectsModel.append({ name: "libSavitar", description: catalog.i18nc("@label Description for application component", "Support library for handling 3MF files"), license: "LGPLv3", url: "https://github.com/ultimaker/libsavitar" });
+                        projectsModel.append({ name: "libCharon", description: catalog.i18nc("@label Description for application component", "Support library for file metadata and streaming"), license: "LGPLv3", url: "https://github.com/ultimaker/libcharon" });
+
+                        //Direct dependencies of the front-end.
+                        projectsModel.append({ name: "Python", description: catalog.i18nc("@label Description for application dependency", "Programming language"), license: "Python", url: "http://python.org/" });
+                        projectsModel.append({ name: "Qt6", description: catalog.i18nc("@label Description for application dependency", "GUI framework"), license: "LGPLv3", url: "https://www.qt.io/" });
+                        projectsModel.append({ name: "PyQt", description: catalog.i18nc("@label Description for application dependency", "GUI framework bindings"), license: "GPL", url: "https://riverbankcomputing.com/software/pyqt" });
+                        projectsModel.append({ name: "SIP", description: catalog.i18nc("@label Description for application dependency", "C/C++ Binding library"), license: "GPL", url: "https://riverbankcomputing.com/software/sip" });
+                        projectsModel.append({ name: "Protobuf", description: catalog.i18nc("@label Description for application dependency", "Data interchange format"), license: "BSD", url: "https://developers.google.com/protocol-buffers" });
+                        projectsModel.append({ name: "Noto Sans", description: catalog.i18nc("@label", "Font"), license: "Apache 2.0", url: "https://www.google.com/get/noto/" });
+
+                        //CuraEngine's dependencies.
+                        projectsModel.append({ name: "Clipper", description: catalog.i18nc("@label Description for application dependency", "Polygon clipping library"), license: "Boost", url: "http://www.angusj.com/delphi/clipper.php" });
+                        projectsModel.append({ name: "RapidJSON", description: catalog.i18nc("@label Description for application dependency", "JSON parser"), license: "MIT", url: "https://rapidjson.org/" });
+                        projectsModel.append({ name: "STB", description: catalog.i18nc("@label Description for application dependency", "Utility functions, including an image loader"), license: "Public Domain", url: "https://github.com/nothings/stb" });
+                        projectsModel.append({ name: "Boost", description: catalog.i18nc("@label Description for application dependency", "Utility library, including Voronoi generation"), license: "Boost", url: "https://www.boost.org/" });
+
+                        //Python modules.
+                        projectsModel.append({ name: "Certifi", description: catalog.i18nc("@label Description for application dependency", "Root Certificates for validating SSL trustworthiness"), license: "MPL", url: "https://github.com/certifi/python-certifi" });
+                        projectsModel.append({ name: "Cryptography", description: catalog.i18nc("@label Description for application dependency", "Root Certificates for validating SSL trustworthiness"), license: "APACHE and BSD", url: "https://cryptography.io/" });
+                        projectsModel.append({ name: "Future", description: catalog.i18nc("@label Description for application dependency", "Compatibility between Python 2 and 3"), license: "MIT", url: "https://python-future.org/" });
+                        projectsModel.append({ name: "keyring", description: catalog.i18nc("@label Description for application dependency", "Support library for system keyring access"), license: "MIT", url: "https://github.com/jaraco/keyring" });
+                        projectsModel.append({ name: "NumPy", description: catalog.i18nc("@label Description for application dependency", "Support library for faster math"), license: "BSD", url: "http://www.numpy.org/" });
+                        projectsModel.append({ name: "NumPy-STL", description: catalog.i18nc("@label Description for application dependency", "Support library for handling STL files"), license: "BSD", url: "https://github.com/WoLpH/numpy-stl" });
+                        projectsModel.append({ name: "PyClipper", description: catalog.i18nc("@label Description for application dependency", "Python bindings for Clipper"), license: "MIT", url: "https://github.com/fonttools/pyclipper" });
+                        projectsModel.append({ name: "PySerial", description: catalog.i18nc("@label Description for application dependency", "Serial communication library"), license: "Python", url: "http://pyserial.sourceforge.net/" });
+                        projectsModel.append({ name: "SciPy", description: catalog.i18nc("@label Description for application dependency", "Support library for scientific computing"), license: "BSD-new", url: "https://www.scipy.org/" });
+                        projectsModel.append({ name: "Sentry", description: catalog.i18nc("@Label Description for application dependency", "Python Error tracking library"), license: "BSD 2-Clause 'Simplified'", url: "https://sentry.io/for/python/" });
+                        projectsModel.append({ name: "Trimesh", description: catalog.i18nc("@label Description for application dependency", "Support library for handling triangular meshes"), license: "MIT", url: "https://trimsh.org" });
+                        projectsModel.append({ name: "python-zeroconf", description: catalog.i18nc("@label Description for application dependency", "ZeroConf discovery library"), license: "LGPL", url: "https://github.com/jstasiak/python-zeroconf" });
+
+                        //Building/packaging.
+                        projectsModel.append({ name: "CMake", description: catalog.i18nc("@label Description for development tool", "Universal build system configuration"), license: "BSD 3-Clause", url: "https://cmake.org/" });
+                        projectsModel.append({ name: "Conan", description: catalog.i18nc("@label Description for development tool", "Dependency and package manager"), license: "MIT", url: "https://conan.io/" });
+                        projectsModel.append({ name: "Pyinstaller", description: catalog.i18nc("@label Description for development tool", "Packaging Python-applications"), license: "GPLv2", url: "https://pyinstaller.org/" });
+                        projectsModel.append({ name: "AppImageKit", description: catalog.i18nc("@label Description for development tool", "Linux cross-distribution application deployment"), license: "MIT", url: "https://github.com/AppImage/AppImageKit" });
+                        projectsModel.append({ name: "NSIS", description: catalog.i18nc("@label Description for development tool", "Generating Windows installers"), license: "Zlib", url: "https://nsis.sourceforge.io/" });
+                    }
+                }
+            }
+
             UM.Label
             {
-                text: model.license
-                elide: Text.ElideRight
-                width: (projectsList.width * 0.15) | 0
+                visible: !showDefaultDependencies
+                text: "Conan Installs"
+                font: UM.Theme.getFont("large_bold")
+            }
+
+            Column
+            {
+                visible: !showDefaultDependencies
+                width: parent.width
+
+                Repeater
+                {
+                    width: parent.width
+                    model: Object
+                        .entries(CuraApplication.conanInstalls)
+                        .map(([name, { version }]) => ({ name, version }))
+                    delegate: Loader
+                    {
+                        sourceComponent: dependency_row
+                        width: parent.width
+                        property string name: modelData.name
+                        property string version: modelData.version
+                        property string license: ""
+                        property string url: ""
+                        property string description: ""
+                    }
+                }
+            }
+
+            UM.Label
+            {
+                visible: !showDefaultDependencies
+                text: "Python Installs"
+                font: UM.Theme.getFont("large_bold")
+            }
+
+            Column
+            {
+                width: parent.width
+                visible: !showDefaultDependencies
+
+                Repeater
+                {
+                    delegate: Loader
+                    {
+                        sourceComponent: dependency_row
+                        width: parent.width
+                        property string name: modelData.name
+                        property string version: modelData.version
+                        property string license: ""
+                        property string url: ""
+                        property string description: ""
+                    }
+                    width: parent.width
+                    model: Object
+                        .entries(CuraApplication.pythonInstalls)
+                        .map(([name, { version }]) => ({ name, version }))
+                }
             }
         }
-        model: ListModel
-        {
-            id: projectsModel
-        }
-        Component.onCompleted:
-        {
-            //Do NOT add dependencies of our dependencies here, nor CI-dependencies!
-            //UltiMaker's own projects and forks.
-            projectsModel.append({ name: "Cura", description: catalog.i18nc("@label Description for application component", "Graphical user interface"), license: "LGPLv3", url: "https://github.com/Ultimaker/Cura" });
-            projectsModel.append({ name: "Uranium", description: catalog.i18nc("@label Description for application component", "Application framework"), license: "LGPLv3", url: "https://github.com/Ultimaker/Uranium" });
-            projectsModel.append({ name: "CuraEngine", description: catalog.i18nc("@label Description for application component", "G-code generator"), license: "AGPLv3", url: "https://github.com/Ultimaker/CuraEngine" });
-            projectsModel.append({ name: "libArcus", description: catalog.i18nc("@label Description for application component", "Interprocess communication library"), license: "LGPLv3", url: "https://github.com/Ultimaker/libArcus" });
-            projectsModel.append({ name: "pynest2d", description: catalog.i18nc("@label Description for application component", "Python bindings for libnest2d"), license: "LGPL", url: "https://github.com/Ultimaker/pynest2d" });
-            projectsModel.append({ name: "libnest2d", description: catalog.i18nc("@label Description for application component", "Polygon packing library, developed by Prusa Research"), license: "LGPL", url: "https://github.com/tamasmeszaros/libnest2d" });
-            projectsModel.append({ name: "libSavitar", description: catalog.i18nc("@label Description for application component", "Support library for handling 3MF files"), license: "LGPLv3", url: "https://github.com/ultimaker/libsavitar" });
-            projectsModel.append({ name: "libCharon", description: catalog.i18nc("@label Description for application component", "Support library for file metadata and streaming"), license: "LGPLv3", url: "https://github.com/ultimaker/libcharon" });
-
-            //Direct dependencies of the front-end.
-            projectsModel.append({ name: "Python", description: catalog.i18nc("@label Description for application dependency", "Programming language"), license: "Python", url: "http://python.org/" });
-            projectsModel.append({ name: "Qt6", description: catalog.i18nc("@label Description for application dependency", "GUI framework"), license: "LGPLv3", url: "https://www.qt.io/" });
-            projectsModel.append({ name: "PyQt", description: catalog.i18nc("@label Description for application dependency", "GUI framework bindings"), license: "GPL", url: "https://riverbankcomputing.com/software/pyqt" });
-            projectsModel.append({ name: "SIP", description: catalog.i18nc("@label Description for application dependency", "C/C++ Binding library"), license: "GPL", url: "https://riverbankcomputing.com/software/sip" });
-            projectsModel.append({ name: "Protobuf", description: catalog.i18nc("@label Description for application dependency", "Data interchange format"), license: "BSD", url: "https://developers.google.com/protocol-buffers" });
-            projectsModel.append({ name: "Noto Sans", description: catalog.i18nc("@label", "Font"), license: "Apache 2.0", url: "https://www.google.com/get/noto/" });
-
-            //CuraEngine's dependencies.
-            projectsModel.append({ name: "Clipper", description: catalog.i18nc("@label Description for application dependency", "Polygon clipping library"), license: "Boost", url: "http://www.angusj.com/delphi/clipper.php" });
-            projectsModel.append({ name: "RapidJSON", description: catalog.i18nc("@label Description for application dependency", "JSON parser"), license: "MIT", url: "https://rapidjson.org/" });
-            projectsModel.append({ name: "STB", description: catalog.i18nc("@label Description for application dependency", "Utility functions, including an image loader"), license: "Public Domain", url: "https://github.com/nothings/stb" });
-            projectsModel.append({ name: "Boost", description: catalog.i18nc("@label Description for application dependency", "Utility library, including Voronoi generation"), license: "Boost", url: "https://www.boost.org/" });
-
-            //Python modules.
-            projectsModel.append({ name: "Certifi", description: catalog.i18nc("@label Description for application dependency", "Root Certificates for validating SSL trustworthiness"), license: "MPL", url: "https://github.com/certifi/python-certifi" });
-            projectsModel.append({ name: "Cryptography", description: catalog.i18nc("@label Description for application dependency", "Root Certificates for validating SSL trustworthiness"), license: "APACHE and BSD", url: "https://cryptography.io/" });
-            projectsModel.append({ name: "Future", description: catalog.i18nc("@label Description for application dependency", "Compatibility between Python 2 and 3"), license: "MIT", url: "https://python-future.org/" });
-            projectsModel.append({ name: "keyring", description: catalog.i18nc("@label Description for application dependency", "Support library for system keyring access"), license: "MIT", url: "https://github.com/jaraco/keyring" });
-            projectsModel.append({ name: "NumPy", description: catalog.i18nc("@label Description for application dependency", "Support library for faster math"), license: "BSD", url: "http://www.numpy.org/" });
-            projectsModel.append({ name: "NumPy-STL", description: catalog.i18nc("@label Description for application dependency", "Support library for handling STL files"), license: "BSD", url: "https://github.com/WoLpH/numpy-stl" });
-            projectsModel.append({ name: "PyClipper", description: catalog.i18nc("@label Description for application dependency", "Python bindings for Clipper"), license: "MIT", url: "https://github.com/fonttools/pyclipper" });
-            projectsModel.append({ name: "PySerial", description: catalog.i18nc("@label Description for application dependency", "Serial communication library"), license: "Python", url: "http://pyserial.sourceforge.net/" });
-            projectsModel.append({ name: "SciPy", description: catalog.i18nc("@label Description for application dependency", "Support library for scientific computing"), license: "BSD-new", url: "https://www.scipy.org/" });
-            projectsModel.append({ name: "Sentry", description: catalog.i18nc("@Label Description for application dependency", "Python Error tracking library"), license: "BSD 2-Clause 'Simplified'", url: "https://sentry.io/for/python/" });
-            projectsModel.append({ name: "Trimesh", description: catalog.i18nc("@label Description for application dependency", "Support library for handling triangular meshes"), license: "MIT", url: "https://trimsh.org" });
-            projectsModel.append({ name: "python-zeroconf", description: catalog.i18nc("@label Description for application dependency", "ZeroConf discovery library"), license: "LGPL", url: "https://github.com/jstasiak/python-zeroconf" });
-
-            //Building/packaging.
-            projectsModel.append({ name: "CMake", description: catalog.i18nc("@label Description for development tool", "Universal build system configuration"), license: "BSD 3-Clause", url: "https://cmake.org/" });
-            projectsModel.append({ name: "Conan", description: catalog.i18nc("@label Description for development tool", "Dependency and package manager"), license: "MIT", url: "https://conan.io/" });
-            projectsModel.append({ name: "Pyinstaller", description: catalog.i18nc("@label Description for development tool", "Packaging Python-applications"), license: "GPLv2", url: "https://pyinstaller.org/" });
-            projectsModel.append({ name: "AppImageKit", description: catalog.i18nc("@label Description for development tool", "Linux cross-distribution application deployment"), license: "MIT", url: "https://github.com/AppImage/AppImageKit" });
-            projectsModel.append({ name: "NSIS", description: catalog.i18nc("@label Description for development tool", "Generating Windows installers"), license: "Zlib", url: "https://nsis.sourceforge.io/" });
-        }
-    }
-
-    AboutDialogVersionsList{
-        id: projectBuildInfoList
-
-    }
-
-
-    onVisibleChanged:
-    {
-         projectsList.visible = true;
-         projectBuildInfoList.visible = false;
     }
 
     rightButtons: Cura.TertiaryButton
     {
-        //: Close about dialog button
         id: closeButton
         text: catalog.i18nc("@action:button", "Close")
         onClicked: reject()