diff --git a/plugins/MakerbotWriter/MakerbotWriter.py b/plugins/MakerbotWriter/MakerbotWriter.py
index f35b53a84d..e4c2d2cbd1 100644
--- a/plugins/MakerbotWriter/MakerbotWriter.py
+++ b/plugins/MakerbotWriter/MakerbotWriter.py
@@ -258,11 +258,87 @@ class MakerbotWriter(MeshWriter):
 
         meta["preferences"] = dict()
         bounds = application.getBuildVolume().getBoundingBox()
+        intent = CuraApplication.getInstance().getIntentManager().currentIntentCategory
         meta["preferences"]["instance0"] = {
             "machineBounds": [bounds.right, bounds.front, bounds.left, bounds.back] if bounds is not None else None,
-            "printMode": CuraApplication.getInstance().getIntentManager().currentIntentCategory,
+            "printMode": intent
         }
 
+        if file_format == "application/x-makerbot":
+            accel_overrides = meta["accel_overrides"] = {}
+            if intent in ['highspeed', 'highspeedsolid']:
+                accel_overrides['do_input_shaping'] = True
+                accel_overrides['do_corner_rounding'] = True
+            bead_mode_overrides = accel_overrides["bead_mode"] = {}
+
+            accel_enabled = global_stack.getProperty('acceleration_enabled', 'value')
+
+            if accel_enabled:
+                global_accel_setting = global_stack.getProperty('acceleration_print', 'value')
+                accel_overrides["rate_mm_per_s_sq"] = {
+                    "x": global_accel_setting,
+                    "y": global_accel_setting
+                }
+
+                if global_stack.getProperty('acceleration_travel_enabled', 'value'):
+                    travel_accel_setting = global_stack.getProperty('acceleration_travel', 'value')
+                    bead_mode_overrides['Travel Move'] = {
+                        "rate_mm_per_s_sq": {
+                            "x": travel_accel_setting,
+                            "y": travel_accel_setting
+                        }
+                    }
+
+            jerk_enabled = global_stack.getProperty('jerk_enabled', 'value')
+            if jerk_enabled:
+                global_jerk_setting = global_stack.getProperty('jerk_print', 'value')
+                accel_overrides["max_speed_change_mm_per_s"] = {
+                    "x": global_jerk_setting,
+                    "y": global_jerk_setting
+                }
+
+                if global_stack.getProperty('jerk_travel_enabled', 'value'):
+                    travel_jerk_setting = global_stack.getProperty('jerk_travel', 'value')
+                    if 'Travel Move' not in bead_mode_overrides:
+                        bead_mode_overrides['Travel Move' ] = {}
+                    bead_mode_overrides['Travel Move'].update({
+                        "max_speed_change_mm_per_s": {
+                            "x": travel_jerk_setting,
+                            "y": travel_jerk_setting
+                        }
+                    })
+
+
+            # Get bead mode settings per extruder
+            available_bead_modes = {
+                "infill": "FILL",
+                "prime_tower": "PRIME_TOWER",
+                "roofing": "TOP_SURFACE",
+                "support_infill": "SUPPORT",
+                "support_interface": "SUPPORT_INTERFACE",
+                "wall_0": "WALL_OUTER",
+                "wall_x": "WALL_INNER",
+                "skirt_brim": "SKIRT"
+            }
+            for idx, extruder in enumerate(extruders):
+                for bead_mode_setting, bead_mode_tag in available_bead_modes.items():
+                    ext_specific_tag = "%s_%s" % (bead_mode_tag, idx)
+                    if accel_enabled or jerk_enabled:
+                        bead_mode_overrides[ext_specific_tag] = {}
+
+                    if accel_enabled:
+                        accel_val = extruder.getProperty('acceleration_%s' % bead_mode_setting, 'value')
+                        bead_mode_overrides[ext_specific_tag]["rate_mm_per_s_sq"] = {
+                            "x": accel_val,
+                            "y": accel_val
+                        }
+                    if jerk_enabled:
+                        jerk_val = extruder.getProperty('jerk_%s' % bead_mode_setting, 'value')
+                        bead_mode_overrides[ext_specific_tag][ "max_speed_change_mm_per_s"] = {
+                            "x": jerk_val,
+                            "y": jerk_val
+                        }
+
         meta["miracle_config"] = {"gaggles": {"instance0": {}}}
 
         version_info = dict()
diff --git a/resources/definitions/ultimaker_method_base.def.json b/resources/definitions/ultimaker_method_base.def.json
index 9480d59e5d..e421b20529 100644
--- a/resources/definitions/ultimaker_method_base.def.json
+++ b/resources/definitions/ultimaker_method_base.def.json
@@ -33,7 +33,7 @@
     {
         "acceleration_enabled":
         {
-            "enabled": false,
+            "enabled": true,
             "value": true
         },
         "acceleration_infill":
diff --git a/resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..d94d81975a
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_method
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..4d07d03ceb
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_method
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 47
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..0a99efa15f
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_method
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..91578dbbab
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_method
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 47
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..9027a2f4ab
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_method
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..ed738f50b0
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_method
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 47
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..3687fd1e2c
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_method
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..03bcd00b03
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_method
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 47
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..25fe675396
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_method
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..52831d4540
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_method
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 47
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..4e703a29f1
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_method
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..989b134ee2
--- /dev/null
+++ b/resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_method
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 47
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..fd0a3af0cb
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..d9fbea6879
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 47
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..95c145c410
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..70553ab775
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 47
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..f5a00d9db1
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..2e098b3a0b
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..36e67bf91f
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..9a8c84f118
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 47
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..c3e0d3c20e
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..f9478920c8
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 47
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..0db1a5b803
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1XA
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..b6ff6e1ebd
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1XA
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..4b42af13fa
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..69a50a831b
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..1c0d1aea28
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..fb0211d89e
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 47
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..c286add3fc
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..a443e7fa29
--- /dev/null
+++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+definition = ultimaker_methodx
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 47
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..ed8a845d8f
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..b0f667ae13
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 45
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+material_bed_temperature = 45
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..5057bf35e6
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..228d1b0297
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1A
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 45
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+material_bed_temperature = 45
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..0328525090
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..0c2bb88cc7
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..c2f02ccc55
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..42a678616a
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 45
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+material_bed_temperature = 45
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..1eea27049b
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..b7637e1bf7
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1C
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 45
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+material_bed_temperature = 45
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..a82ddaa428
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1XA
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..9aebcb531b
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = 1XA
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..11aa6d2878
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_pattern = zigzag
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..ea8caef493
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_absr_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+cool_min_temperature = 245.0
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+speed_layer_0 = 55
+speed_print = 300
+speed_support = 100
+speed_support_interface = 75
+speed_travel = 500
+speed_travel_layer_0 = 250
+speed_wall_0 = 40
+support_pattern = zigzag
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..2b101b37a5
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..1af18325ae
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 45
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+material_bed_temperature = 45
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg
new file mode 100644
index 0000000000..d2480bf711
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg
@@ -0,0 +1,34 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed
+version = 4
+
+[metadata]
+intent_category = highspeed
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bridge_wall_speed = 300
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_pattern = zigzag
+jerk_print = 35
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+
diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
new file mode 100644
index 0000000000..77ba3130b1
--- /dev/null
+++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+definition = ultimaker_methodxl
+name = High Speed Solid
+version = 4
+
+[metadata]
+intent_category = highspeedsolid
+is_experimental = True
+material = ultimaker_tough_pla_175
+quality_type = draft
+setting_version = 25
+type = intent
+variant = LABS
+
+[values]
+acceleration_print = 3500
+bottom_thickness = =top_bottom_thickness
+bridge_wall_speed = 300
+build_volume_temperature = 45
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_min_layer_time = 3
+infill_angles = [45,135]
+infill_material_flow = 97
+infill_pattern = zigzag
+infill_sparse_density = 99
+jerk_print = 35
+material_bed_temperature = 45
+speed_infill = 240.0
+speed_layer_0 = 55
+speed_print = 300
+speed_travel = 500
+speed_travel_layer_0 = 350.0
+speed_wall_0 = 45
+support_interface_line_width = 0.42
+support_line_width = 0.47
+support_material_flow = 100
+support_pattern = zigzag
+support_roof_line_width = 0.42
+top_bottom_thickness = =layer_height * 2
+top_thickness = =top_bottom_thickness
+