diff --git a/resources/machines/dual_extrusion_printer.json b/resources/machines/dual_extrusion_printer.json index 05096ffdd0..6506f0c7f8 100644 --- a/resources/machines/dual_extrusion_printer.json +++ b/resources/machines/dual_extrusion_printer.json @@ -204,8 +204,7 @@ "unit": "mm", "default": 0.15, "min_value": "0", - "max_value_warning": "1.0", - "global_only": true + "max_value_warning": "1.0" }, "ooze_shield_enabled": { "label": "Enable Ooze Shield", diff --git a/resources/machines/fdmprinter.json b/resources/machines/fdmprinter.json index c4c2253812..ba374072bc 100644 --- a/resources/machines/fdmprinter.json +++ b/resources/machines/fdmprinter.json @@ -452,46 +452,6 @@ "visible": false, "inherit": false }, - "remove_overlapping_walls_enabled": { - "label": "Remove Overlapping Wall Parts", - "description": "Remove parts of a wall which share an overlap which would result in overextrusion in some places. These overlaps occur in thin parts and sharp corners in models.", - "type": "boolean", - "default": false, - "visible": false, - "enabled": "False", - "children": { - "remove_overlapping_walls_0_enabled": { - "label": "Remove Overlapping Outer Wall Parts", - "description": "Remove parts of an outer wall which share an overlap which would result in overextrusion in some places. These overlaps occur in thin pieces in a model and sharp corners.", - "type": "boolean", - "default": false, - "visible": false, - "inherit": true, - "enabled": "False" - }, - "remove_overlapping_walls_x_enabled": { - "label": "Remove Overlapping Inner Wall Parts", - "description": "Remove parts of an inner wall that would otherwise overlap and cause over-extrusion. These overlaps occur in thin pieces in a model and sharp corners.", - "type": "boolean", - "default": true, - "visible": false, - "inherit": false - } - } - }, - "fill_perimeter_gaps": { - "label": "Fill Gaps Between Walls", - "description": "Fills the gaps between walls when overlapping inner wall parts are removed.", - "type": "enum", - "options": { - "nowhere": "Nowhere", - "everywhere": "Everywhere", - "skin": "Skin" - }, - "default": "everywhere", - "visible": false, - "enabled": "remove_overlapping_walls_x_enabled" - }, "travel_compensate_overlapping_walls_enabled": { "label": "Compensate Wall Overlaps", "description": "Compensate the flow for parts of a wall being printed where there is already a wall in place.",