Merge pull request #16780 from Ultimaker/PP-245-profile-tweaks

Bug fixes profiles

resources/intent/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm_quick.inst.cfg

@@ -5,7 +5,6 @@ version = 4
 
 [metadata]
 intent_category = quick
-is_experimental = True
 material = ultimaker_pla
 quality_type = verydraft
 setting_version = 22

resources/intent/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg

@@ -5,7 +5,6 @@ version = 4
 
 [metadata]
 intent_category = quick
-is_experimental = True
 material = ultimaker_tough_pla
 quality_type = verydraft
 setting_version = 22

resources/intent/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm_quick.inst.cfg

@@ -5,7 +5,6 @@ version = 4
 
 [metadata]
 intent_category = quick
-is_experimental = True
 material = ultimaker_pla
 quality_type = verydraft
 setting_version = 22

resources/intent/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm_quick.inst.cfg

@@ -5,7 +5,6 @@ version = 4
 
 [metadata]
 intent_category = quick
-is_experimental = True
 material = ultimaker_tough_pla
 quality_type = verydraft
 setting_version = 22

resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg

@@ -45,8 +45,8 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.15
-retraction_amount = 4
+retraction_amount = 6.5
-retraction_prime_speed = =retraction_speed
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False

resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg

@@ -46,8 +46,8 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.15
-retraction_amount = 4
+retraction_amount = 6.5
-retraction_prime_speed = =retraction_speed
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False

resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg

@@ -1,10 +1,9 @@
 [general]
 definition = ultimaker_s3
-name = Extra Fast - Experimental
+name = Extra Fast
 version = 4
 
 [metadata]
-is_experimental = True
 material = ultimaker_abs
 quality_type = verydraft
 setting_version = 22
@@ -47,8 +46,8 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.15
-retraction_amount = 4
+retraction_amount = 6.5
-retraction_prime_speed = =retraction_speed
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False

resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg

@@ -1,10 +1,9 @@
 [general]
 definition = ultimaker_s3
-name = Extra Fast - Experimental
+name = Extra Fast
 version = 4
 
 [metadata]
-is_experimental = True
 material = ultimaker_petg
 quality_type = verydraft
 setting_version = 22

resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg

@@ -45,7 +45,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg

@@ -46,7 +46,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg

@@ -1,10 +1,9 @@
 [general]
 definition = ultimaker_s3
-name = Extra Fast - Experimental
+name = Extra Fast
 version = 4
 
 [metadata]
-is_experimental = True
 material = ultimaker_pla
 quality_type = verydraft
 setting_version = 22
@@ -47,7 +46,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg

@@ -45,7 +45,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg

@@ -45,7 +45,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg

@@ -1,10 +1,9 @@
 [general]
 definition = ultimaker_s3
-name = Extra Fast - Experimental
+name = Extra Fast
 version = 4
 
 [metadata]
-is_experimental = True
 material = ultimaker_tough_pla
 quality_type = verydraft
 setting_version = 22
@@ -47,7 +46,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg

@@ -47,8 +47,8 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.15
-retraction_amount = 4
+retraction_amount = 6.5
-retraction_prime_speed = =retraction_speed
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False

resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg

@@ -46,8 +46,8 @@ material_print_temperature = =default_material_print_temperature + 7
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.15
-retraction_amount = 4
+retraction_amount = 6.5
-retraction_prime_speed = =retraction_speed
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False

resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg

@@ -46,8 +46,8 @@ material_print_temperature = =default_material_print_temperature + 10
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.15
-retraction_amount = 4
+retraction_amount = 6.5
-retraction_prime_speed = =retraction_speed
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False

resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg

@@ -47,7 +47,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg

@@ -46,7 +46,7 @@ material_print_temperature = =default_material_print_temperature + 10
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg

@@ -46,7 +46,7 @@ material_print_temperature = =default_material_print_temperature + 15
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg

@@ -47,7 +47,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg

@@ -46,7 +46,7 @@ material_print_temperature = =default_material_print_temperature + 15
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg

@@ -46,7 +46,7 @@ material_print_temperature = =default_material_print_temperature + 15
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg

@@ -45,8 +45,8 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.15
-retraction_amount = 4
+retraction_amount = 6.5
-retraction_prime_speed = =retraction_speed
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False

resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg

@@ -46,8 +46,8 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.15
-retraction_amount = 4
+retraction_amount = 6.5
-retraction_prime_speed = =retraction_speed
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False

resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg

@@ -1,10 +1,9 @@
 [general]
 definition = ultimaker_s5
-name = Extra Fast - Experimental
+name = Extra Fast
 version = 4
 
 [metadata]
-is_experimental = True
 material = ultimaker_abs
 quality_type = verydraft
 setting_version = 22
@@ -47,8 +46,8 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.15
-retraction_amount = 4
+retraction_amount = 6.5
-retraction_prime_speed = =retraction_speed
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False

resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg

@@ -1,10 +1,9 @@
 [general]
 definition = ultimaker_s5
-name = Extra Fast - Experimental
+name = Extra Fast
 version = 4
 
 [metadata]
-is_experimental = True
 material = ultimaker_petg
 quality_type = verydraft
 setting_version = 22

resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg

@@ -45,7 +45,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg

@@ -46,7 +46,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg

@@ -1,10 +1,9 @@
 [general]
 definition = ultimaker_s5
-name = Extra Fast - Experimental
+name = Extra Fast
 version = 4
 
 [metadata]
-is_experimental = True
 material = ultimaker_pla
 quality_type = verydraft
 setting_version = 22
@@ -47,7 +46,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg

@@ -45,7 +45,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg

@@ -45,7 +45,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg

@@ -1,10 +1,9 @@
 [general]
 definition = ultimaker_s5
-name = Extra Fast - Experimental
+name = Extra Fast
 version = 4
 
 [metadata]
-is_experimental = True
 material = ultimaker_tough_pla
 quality_type = verydraft
 setting_version = 22
@@ -47,7 +46,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = False
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg

@@ -47,8 +47,8 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.15
-retraction_amount = 4
+retraction_amount = 6.5
-retraction_prime_speed = =retraction_speed
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False

resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg

@@ -46,8 +46,8 @@ material_print_temperature = =default_material_print_temperature + 7
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.15
-retraction_amount = 4
+retraction_amount = 6.5
-retraction_prime_speed = =retraction_speed
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False

resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg

@@ -46,8 +46,8 @@ material_print_temperature = =default_material_print_temperature + 10
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.15
-retraction_amount = 4
+retraction_amount = 6.5
-retraction_prime_speed = =retraction_speed
+retraction_prime_speed = 15
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True
 small_skin_on_surface = False

resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg

@@ -47,7 +47,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg

@@ -46,7 +46,7 @@ material_print_temperature = =default_material_print_temperature + 10
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg

@@ -46,7 +46,7 @@ material_print_temperature = =default_material_print_temperature + 15
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg

@@ -47,7 +47,7 @@ meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg

@@ -46,7 +46,7 @@ material_print_temperature = =default_material_print_temperature + 15
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True

resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg

@@ -46,7 +46,7 @@ material_print_temperature = =default_material_print_temperature + 15
 optimize_wall_printing_order = False
 prime_tower_enable = True
 raft_airgap = 0.25
-retraction_amount = 4
+retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
 retraction_speed = 45
 skin_no_small_gaps_heuristic = True