diff --git a/resources/definitions/tinyboy_fabrikator15.def.json b/resources/definitions/tinyboy_fabrikator15.def.json
new file mode 100644
index 0000000000..53d336160a
--- /dev/null
+++ b/resources/definitions/tinyboy_fabrikator15.def.json
@@ -0,0 +1,44 @@
+{
+    "version": 2,
+    "name": "TinyBoy Fabrikator Mini 1.5",
+    "inherits": "fdmprinter",
+    "metadata": { 
+        "visible": true,
+        "author": "Reiner Buehl",
+        "manufacturer": "TinyBoy",
+        "file_formats": "text/x-gcode",
+        "platform": "tinyboy_fabrikator15.stl",
+        "platform_offset": [-95, 0, -46],
+        "has_materials": false,
+        "has_machine_quality": true,
+        "preferred_quality_type": "normal",
+        "machine_extruder_trains":
+        {
+            "0": "tinyboy_fabrikator15_extruder_0"
+        }
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "Fabrikator Mini 1.5" },
+        "machine_width": { "default_value": 80 },
+        "machine_depth": { "default_value": 80 },
+        "machine_height": { "default_value": 80 },
+        "machine_head_with_fans_polygon": { "default_value": [
+                [-10, 35],
+                [-10, -18],
+                [28, -18],
+                [28, 35]
+            ]
+        },
+        "gantry_height": { "value": 45 },
+        "machine_center_is_zero": { "default_value": false },
+         "machine_start_gcode": {
+            "default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{print_temperature} ;Uncomment to add your own temperature line\nG21        ;metric values\nG90        ;absolute positioning\nM82        ;set extruder to absolute mode\nM107       ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0     ;move Z to min endstops\nG1 X0.0 Y0.0 Z15.0 F{travel_speed} ;move the printhead up 15mm\nG92 E0                  ;zero the extruded length\n;M109 S{print_temperature} ;set extruder temperature\nG1 F200 E30              ;extrude 30mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F{travel_speed}\n;Put printing message on LCD screen\nM117 Printing..."
+
+        },
+        "machine_end_gcode": {
+            "default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n;{jobname}"
+
+        }
+    }
+}
diff --git a/resources/extruders/tinyboy_fabrikator15_extruder_0.def.json b/resources/extruders/tinyboy_fabrikator15_extruder_0.def.json
new file mode 100644
index 0000000000..81fa4bd140
--- /dev/null
+++ b/resources/extruders/tinyboy_fabrikator15_extruder_0.def.json
@@ -0,0 +1,15 @@
+{
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "tinyboy_fabrikator15",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": { "default_value": 0 },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}
diff --git a/resources/meshes/tinyboy_fabrikator15.stl b/resources/meshes/tinyboy_fabrikator15.stl
new file mode 100644
index 0000000000..12b7903520
Binary files /dev/null and b/resources/meshes/tinyboy_fabrikator15.stl differ
diff --git a/resources/quality/tinyboy/tinyboy_fabrikator15_draft.inst.cfg b/resources/quality/tinyboy/tinyboy_fabrikator15_draft.inst.cfg
new file mode 100644
index 0000000000..cff940e779
--- /dev/null
+++ b/resources/quality/tinyboy/tinyboy_fabrikator15_draft.inst.cfg
@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = Draft
+definition = tinyboy_fabrikator15
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.3
+layer_height_0 = 0.3
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 60
+speed_support = 60
+speed_topbottom = =math.ceil(speed_print * 30 / 60)
+speed_travel = 100
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2
diff --git a/resources/quality/tinyboy/tinyboy_fabrikator15_high.inst.cfg b/resources/quality/tinyboy/tinyboy_fabrikator15_high.inst.cfg
new file mode 100644
index 0000000000..64cf212eeb
--- /dev/null
+++ b/resources/quality/tinyboy/tinyboy_fabrikator15_high.inst.cfg
@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = High
+definition = tinyboy_fabrikator15
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 2
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.1
+layer_height_0 = 0.1
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 50
+speed_support = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+speed_travel = 50
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2
diff --git a/resources/quality/tinyboy/tinyboy_fabrikator15_normal.inst.cfg b/resources/quality/tinyboy/tinyboy_fabrikator15_normal.inst.cfg
new file mode 100644
index 0000000000..4b5ad60a45
--- /dev/null
+++ b/resources/quality/tinyboy/tinyboy_fabrikator15_normal.inst.cfg
@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = Normal
+definition = tinyboy_fabrikator15
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 1
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.2
+layer_height_0 = 0.2
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 210
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 50
+speed_support = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+speed_travel = 100
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2