Merge pull request #20554 from Ultimaker/PP-625-S8-profile-improvements

PP-625 Improvements to S8 profiles

resources/definitions/ultimaker_s6.def.json

@@ -9,9 +9,7 @@
         "manufacturer": "Ultimaker B.V.",
         "file_formats": "application/x-ufp;text/x-gcode",
         "platform": "ultimaker_s5_platform.obj",
-        "bom_numbers": [
+        "bom_numbers": [10700, 10701],
-            10700
-        ],
         "firmware_update_info":
         {
             "check_urls": [ "https://software.ultimaker.com/releases/firmware/5078167/stable/um-update.swu.version" ],

resources/definitions/ultimaker_s8.def.json

@@ -12,6 +12,17 @@
         "bom_numbers": [
             10600
         ],
+        "exclude_materials": [
+            "generic_hips",
+            "generic_flexible",
+            "generic_cffpps",
+            "generic_cffpa",
+            "generic_cffcpe",
+            "generic_gffpa",
+            "generic_gffcpe",
+            "structur3d_",
+            "ultimaker_ppscf"
+        ],
         "firmware_update_info":
         {
             "check_urls": [ "https://software.ultimaker.com/releases/firmware/10600/stable/um-update.swu.version" ],
@@ -203,6 +214,14 @@
             "unit": "mm/s",
             "value": 50
         },
+        "build_volume_temperature":
+        {
+            "force_depends_on_settings": [
+                "support_extruder_nr",
+                "support_enable"
+            ]
+        },
+        "cool_during_extruder_switch": { "value": "'all_fans'" },
         "cool_min_layer_time": { "value": 5 },
         "cool_min_layer_time_overhang": { "value": 9 },
         "cool_min_layer_time_overhang_min_segment_length": { "value": 2 },
@@ -245,7 +264,7 @@
         {
             "maximum_value_warning": "machine_max_jerk_xy / 2",
             "unit": "m/s\u00b3",
-            "value": "jerk_print"
+            "value": "jerk_wall"
         },
         "jerk_print":
         {
@@ -389,6 +408,13 @@
         "machine_nozzle_cool_down_speed": { "default_value": 1.3 },
         "machine_nozzle_heat_up_speed": { "default_value": 0.6 },
         "machine_start_gcode": { "default_value": "M213 U0.1 ;undercut 0.1mm" },
+        "material_bed_temperature":
+        {
+            "force_depends_on_settings": [
+                "support_extruder_nr",
+                "support_enable"
+            ]
+        },
         "material_extrusion_cool_down_speed": { "value": 0 },
         "material_final_print_temperature": { "value": "material_print_temperature - 5" },
         "material_initial_print_temperature": { "value": "material_print_temperature - 5" },
@@ -397,6 +423,7 @@
             "enabled": true,
             "value": 0.5
         },
+        "material_print_temperature": { "maximum_value_warning": 320 },
         "material_print_temperature_layer_0": { "maximum_value_warning": 320 },
         "max_flow_acceleration": { "value": 8.0 },
         "max_skin_angle_for_expansion": { "value": 45 },
@@ -445,12 +472,12 @@
         "speed_layer_0":
         {
             "maximum_value_warning": 300,
-            "value": "speed_wall"
+            "value": "min(speed_wall, 50)"
         },
         "speed_prime_tower":
         {
             "maximum_value_warning": 300,
-            "value": "speed_wall"
+            "value": "min(speed_wall, 50)"
         },
         "speed_print":
         {
@@ -500,13 +527,13 @@
         "speed_travel":
         {
             "maximum_value": 500,
-            "maximum_value_warning": 300,
+            "maximum_value_warning": 500,
-            "value": 300
+            "value": 500
         },
         "speed_travel_layer_0":
         {
             "maximum_value": 500,
-            "maximum_value_warning": 300,
+            "maximum_value_warning": 500,
             "value": 150
         },
         "speed_wall":
@@ -556,7 +583,10 @@
         "support_roof_height": { "minimum_value_warning": 0 },
         "support_structure": { "value": "'normal'" },
         "support_top_distance": { "maximum_value_warning": "3*layer_height" },
+        "support_tree_angle": { "value": 50 },
+        "support_tree_angle_slow": { "value": 35 },
         "support_tree_bp_diameter": { "value": 15 },
+        "support_tree_branch_diameter": { "value": 8 },
         "support_tree_tip_diameter": { "value": 1.0 },
         "support_tree_top_rate": { "value": 20 },
         "support_xy_distance_overhang": { "value": "machine_nozzle_size" },
@@ -573,6 +603,7 @@
         "wall_material_flow": { "value": 95 },
         "wall_overhang_angle": { "value": 45 },
         "wall_x_material_flow": { "value": 100 },
+        "xy_offset": { "value": 0.05 },
         "z_seam_corner": { "value": "'z_seam_corner_weighted'" },
         "z_seam_position": { "value": "'backright'" },
         "z_seam_type": { "value": "'sharpest_corner'" }

resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg

@@ -14,5 +14,5 @@ variant = AA+ 0.4
 [values]
 infill_sparse_density = 20
 top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 3
+wall_thickness = =line_width * 4
 

resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg

@@ -14,5 +14,5 @@ variant = AA+ 0.4
 [values]
 infill_sparse_density = 20
 top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 3
+wall_thickness = =line_width * 4
 

resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg

@@ -14,5 +14,5 @@ variant = AA+ 0.4
 [values]
 infill_sparse_density = 20
 top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 3
+wall_thickness = =line_width * 4
 

resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg

@@ -14,5 +14,5 @@ variant = AA+ 0.4
 [values]
 infill_sparse_density = 20
 top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 3
+wall_thickness = =line_width * 4
 

resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg

@@ -14,5 +14,5 @@ variant = AA+ 0.4
 [values]
 infill_sparse_density = 20
 top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 3
+wall_thickness = =line_width * 4
 

resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg

@@ -14,5 +14,5 @@ variant = CC+ 0.4
 [values]
 infill_sparse_density = 20
 top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 3
+wall_thickness = =line_width * 4
 

resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg

@@ -14,5 +14,5 @@ variant = CC+ 0.4
 [values]
 infill_sparse_density = 20
 top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 3
+wall_thickness = =line_width * 4
 

resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg

@@ -14,5 +14,5 @@ variant = CC+ 0.4
 [values]
 infill_sparse_density = 20
 top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 3
+wall_thickness = =line_width * 4
 

resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg

@@ -14,5 +14,5 @@ variant = CC+ 0.4
 [values]
 infill_sparse_density = 20
 top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 3
+wall_thickness = =line_width * 4
 

resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg

@@ -14,5 +14,5 @@ variant = CC+ 0.6
 [values]
 infill_sparse_density = 20
 top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 3
+wall_thickness = =line_width * 4
 

resources/intent/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm_engineering.inst.cfg

@@ -14,5 +14,5 @@ variant = CC+ 0.6
 [values]
 infill_sparse_density = 20
 top_bottom_thickness = =wall_thickness
-wall_thickness = =line_width * 3
+wall_thickness = =line_width * 4
 

resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg

@@ -13,8 +13,8 @@ weight = -1
 
 [values]
 brim_replaces_support = False
-build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg

@@ -13,8 +13,8 @@ weight = 0
 
 [values]
 brim_replaces_support = False
-build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg

@@ -13,8 +13,8 @@ weight = -2
 
 [values]
 brim_replaces_support = False
-build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5

resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg

@@ -14,8 +14,8 @@ weight = -3
 
 [values]
 brim_replaces_support = False
-build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5

resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg

@@ -14,9 +14,9 @@ weight = 1
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
 minimum_support_area = 4

resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg

@@ -14,9 +14,9 @@ weight = -1
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 minimum_support_area = 4
 retraction_count_max = 5

resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg

@@ -14,9 +14,9 @@ weight = 0
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
 minimum_support_area = 4

resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg

@@ -14,9 +14,9 @@ weight = -2
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
 minimum_support_area = 4

resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg

@@ -15,9 +15,9 @@ weight = -3
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
 minimum_support_area = 4

resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg

@@ -14,9 +14,9 @@ weight = -2
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 minimum_support_area = 4
 retraction_count_max = 5

resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg

@@ -14,9 +14,9 @@ weight = -3
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
 minimum_support_area = 4

resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg

@@ -14,9 +14,9 @@ weight = -4
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
 minimum_support_area = 4

resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg

@@ -13,8 +13,8 @@ weight = -1
 
 [values]
 brim_replaces_support = False
-build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg

@@ -13,8 +13,8 @@ weight = 0
 
 [values]
 brim_replaces_support = False
-build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg

@@ -13,8 +13,8 @@ weight = -2
 
 [values]
 brim_replaces_support = False
-build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5

resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg

@@ -14,8 +14,8 @@ weight = -3
 
 [values]
 brim_replaces_support = False
-build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5

resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg

@@ -14,9 +14,9 @@ weight = 1
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
 minimum_support_area = 4

resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg

@@ -14,9 +14,9 @@ weight = -1
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 minimum_support_area = 4
 retraction_count_max = 5

resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg

@@ -14,9 +14,9 @@ weight = 0
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
 minimum_support_area = 4

resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg

@@ -14,9 +14,9 @@ weight = -2
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
 minimum_support_area = 4

resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg

@@ -15,9 +15,9 @@ weight = -3
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
 minimum_support_area = 4

resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.2mm.inst.cfg

@@ -14,9 +14,9 @@ weight = -2
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 minimum_support_area = 4
 retraction_count_max = 5

resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.3mm.inst.cfg

@@ -14,9 +14,9 @@ weight = -3
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
 minimum_support_area = 4

resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.4mm.inst.cfg

@@ -14,9 +14,9 @@ weight = -4
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
 minimum_support_area = 4

resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm.inst.cfg

@@ -14,4 +14,5 @@ weight = -2
 [values]
 cool_min_layer_time = 4
 material_print_temperature = =default_material_print_temperature + 5
+retraction_prime_speed = 15
 

resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg

@@ -12,6 +12,9 @@ variant = AA+ 0.4
 weight = 0
 
 [values]
+material_final_print_temperature = =material_print_temperature - 15
+material_initial_print_temperature = =material_print_temperature - 15
 retraction_prime_speed = =retraction_speed
 support_structure = tree
+top_bottom_thickness = =round(6*layer_height,3)
 

resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg

@@ -12,6 +12,8 @@ variant = AA+ 0.4
 weight = -2
 
 [values]
+material_final_print_temperature = =material_print_temperature - 15
+material_initial_print_temperature = =material_print_temperature - 15
 retraction_prime_speed = =retraction_speed
 support_structure = tree
 

resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.1mm.inst.cfg

@@ -14,4 +14,5 @@ weight = 0
 [values]
 retraction_prime_speed = =retraction_speed
 support_structure = tree
+top_bottom_thickness = =round(6*layer_height,3)
 

resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_petg_0.2mm.inst.cfg

@@ -16,5 +16,6 @@ bridge_skin_material_flow = 200
 bridge_wall_material_flow = 200
 cool_min_layer_time = 4
 material_print_temperature = =default_material_print_temperature + 5
+retraction_prime_speed = 15
 support_interface_enable = False
 

resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_petg_0.3mm.inst.cfg

@@ -16,6 +16,7 @@ bridge_skin_material_flow = 200
 bridge_wall_material_flow = 200
 cool_min_layer_time = 4
 material_print_temperature = =default_material_print_temperature + 10
+retraction_prime_speed = 15
 support_interface_enable = False
 wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
 

resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_pla_0.2mm.inst.cfg

@@ -14,7 +14,13 @@ weight = -2
 [values]
 bridge_skin_material_flow = 200
 bridge_wall_material_flow = 200
-retraction_prime_speed = =retraction_speed
+infill_wall_line_count = 1
+material_final_print_temperature = =material_print_temperature - 15
+material_initial_print_temperature = =material_print_temperature - 15
+retraction_prime_speed = 35
+skin_edge_support_thickness = =layer_height*2
+speed_print = 125
+speed_wall = 100
 support_interface_enable = False
 support_structure = tree
 

resources/quality/ultimaker_s8/um_s8_aa_plus_0.6_pla_0.3mm.inst.cfg

@@ -14,8 +14,14 @@ weight = -3
 [values]
 bridge_skin_material_flow = 200
 bridge_wall_material_flow = 200
+infill_wall_line_count = 1
+material_final_print_temperature = =material_print_temperature - 15
+material_initial_print_temperature = =material_print_temperature - 15
 material_print_temperature = =default_material_print_temperature + 20
-retraction_prime_speed = =retraction_speed
+retraction_prime_speed = 35
+skin_edge_support_thickness = =layer_height*2
+speed_print = 125
+speed_wall = 100
 support_interface_enable = False
 support_structure = tree
 wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)

resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.15mm.inst.cfg

@@ -13,8 +13,8 @@ weight = -1
 
 [values]
 brim_replaces_support = False
-build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.1mm.inst.cfg

@@ -13,8 +13,8 @@ weight = 0
 
 [values]
 brim_replaces_support = False
-build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.2mm.inst.cfg

@@ -13,8 +13,8 @@ weight = -2
 
 [values]
 brim_replaces_support = False
-build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5

resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.3mm.inst.cfg

@@ -13,8 +13,8 @@ weight = -3
 
 [values]
 brim_replaces_support = False
-build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+build_volume_temperature = =50 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 24
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5

resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.15mm.inst.cfg

@@ -15,13 +15,16 @@ weight = -1
 acceleration_prime_tower = 1500
 acceleration_support = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 jerk_prime_tower = 4000
 jerk_support = 4000
+material_final_print_temperature = =material_print_temperature - 15
+material_initial_print_temperature = =material_print_temperature - 10
 minimum_support_area = 4
+prime_tower_min_volume = 20
 retraction_amount = 6.5
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))

resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.1mm.inst.cfg

@@ -15,14 +15,17 @@ weight = 0
 acceleration_prime_tower = 1500
 acceleration_support = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 jerk_prime_tower = 4000
 jerk_support = 4000
+material_final_print_temperature = =material_print_temperature - 15
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 5
 minimum_support_area = 4
+prime_tower_min_volume = 20
 retraction_amount = 6.5
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))

resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.2mm.inst.cfg

@@ -15,14 +15,17 @@ weight = -2
 acceleration_prime_tower = 1500
 acceleration_support = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 jerk_prime_tower = 4000
 jerk_support = 4000
+material_final_print_temperature = =material_print_temperature - 15
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature + 5
 minimum_support_area = 4
+prime_tower_min_volume = 20
 retraction_amount = 6.5
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))

resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.3mm.inst.cfg

@@ -15,14 +15,17 @@ weight = -3
 acceleration_prime_tower = 1500
 acceleration_support = 1500
 brim_replaces_support = False
-build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
+build_volume_temperature = =70 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 and (not support_enable or extruder_nr != support_extruder_nr) else 60
 initial_layer_line_width_factor = 150
 jerk_prime_tower = 4000
 jerk_support = 4000
+material_final_print_temperature = =material_print_temperature - 15
+material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature - 5
 minimum_support_area = 4
+prime_tower_min_volume = 20
 retraction_amount = 6.5
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))

resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm.inst.cfg

@@ -12,4 +12,8 @@ variant = CC+ 0.4
 weight = -2
 
 [values]
+adhesion_type = brim
+material_alternate_walls = True
+material_final_print_temperature = =material_print_temperature - 15
+material_initial_print_temperature = =material_print_temperature - 15
 

resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm.inst.cfg

@@ -12,10 +12,14 @@ variant = CC+ 0.4
 weight = -2
 
 [values]
+adhesion_type = brim
 cool_min_layer_time = 6
 cool_min_layer_time_fan_speed_max = 12
 inset_direction = inside_out
+material_alternate_walls = True
+material_final_print_temperature = =material_print_temperature - 15
 material_flow = 95
+material_initial_print_temperature = =material_print_temperature - 15
 retraction_prime_speed = 15
 speed_wall_x = =speed_wall_0
 

resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm.inst.cfg

@@ -12,4 +12,5 @@ variant = CC+ 0.4
 weight = -2
 
 [values]
+switch_extruder_retraction_amount = 16
 

resources/quality/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.2mm.inst.cfg

@@ -15,4 +15,5 @@ weight = -2
 bridge_skin_material_flow = 200
 bridge_wall_material_flow = 200
 support_interface_enable = False
+switch_extruder_retraction_amount = 16
 

resources/quality/ultimaker_s8/um_s8_cc_plus_0.6_petcf_0.3mm.inst.cfg

@@ -16,5 +16,6 @@ bridge_skin_material_flow = 200
 bridge_wall_material_flow = 200
 material_print_temperature = =default_material_print_temperature + 10
 support_interface_enable = False
+switch_extruder_retraction_amount = 16
 wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
 

resources/variants/ultimaker_s6_aa_plus06.inst.cfg

@@ -1,17 +0,0 @@
-[general]
-definition = ultimaker_s6
-name = AA+ 0.6
-version = 4
-
-[metadata]
-hardware_type = nozzle
-setting_version = 25
-type = variant
-
-[values]
-machine_nozzle_cool_down_speed = 0.9
-machine_nozzle_id = AA+ 0.6
-machine_nozzle_size = 0.6
-machine_nozzle_tip_outer_diameter = 1.2
-retraction_prime_speed = =retraction_speed
-

resources/variants/ultimaker_s8_aa_plus06.inst.cfg

@@ -1,17 +0,0 @@
-[general]
-definition = ultimaker_s8
-name = AA+ 0.6
-version = 4
-
-[metadata]
-hardware_type = nozzle
-setting_version = 25
-type = variant
-
-[values]
-machine_nozzle_cool_down_speed = 0.9
-machine_nozzle_id = AA+ 0.6
-machine_nozzle_size = 0.6
-machine_nozzle_tip_outer_diameter = 1.2
-retraction_prime_speed = =retraction_speed
-