set raft margin to default of 15mm

The raft margin is not a critical setting and for most profiles it resolves to 15mm currently, which is the default in fdmprinter. PP-243

resources/definitions/ultimaker3.def.json

@@ -116,7 +116,6 @@
         "raft_interface_line_spacing": { "value": "0.5" },
         "raft_interface_line_width": { "value": "0.5" },
         "raft_interface_thickness": { "value": "0.2" },
-        "raft_margin": { "value": "10" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },
         "retraction_hop": { "value": "2" },

resources/definitions/ultimaker_s3.def.json

@@ -107,7 +107,6 @@
         "raft_interface_line_width": { "value": "0.5" },
         "raft_interface_speed": { "value": "20" },
         "raft_interface_thickness": { "value": "0.2" },
-        "raft_margin": { "value": "10" },
         "raft_speed": { "value": "25" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },

resources/definitions/ultimaker_s5.def.json

@@ -108,7 +108,6 @@
         "raft_interface_line_width": { "value": "0.5" },
         "raft_interface_speed": { "value": "20" },
         "raft_interface_thickness": { "value": "0.2" },
-        "raft_margin": { "value": "10" },
         "raft_speed": { "value": "25" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },

resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg

@@ -25,7 +25,6 @@ raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
-raft_margin = 15
 raft_surface_line_width = 0.38
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25

resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg

@@ -25,7 +25,6 @@ raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
-raft_margin = 15
 raft_surface_line_width = 0.38
 speed_layer_0 = =math.ceil(speed_print * 15 / 35)
 speed_print = 35

resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg

@@ -26,7 +26,6 @@ raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
 raft_interface_line_width = 1.2
-raft_margin = 15
 raft_surface_line_width = 0.57
 raft_surface_thickness = 0.2
 speed_layer_0 = =round(speed_print * 30 / 50)

resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg

@@ -26,7 +26,6 @@ raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
 raft_interface_line_width = 1.2
-raft_margin = 15
 raft_surface_line_width = 0.57
 raft_surface_thickness = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 35)

resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg

@@ -24,7 +24,6 @@ raft_airgap = 0.37
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
 raft_interface_line_width = 1.6
-raft_margin = 15
 raft_surface_line_width = 0.7
 raft_surface_thickness = 0.2
 speed_layer_0 = =round(speed_print * 30 / 25)

resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg

@@ -24,7 +24,6 @@ raft_airgap = 0.37
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
 raft_interface_line_width = 1.6
-raft_margin = 15
 raft_surface_line_width = 0.7
 raft_surface_thickness = 0.2
 speed_layer_0 = =round(speed_print * 30 / 30)

resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg

@@ -24,7 +24,6 @@ raft_airgap = 0.15
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
 raft_interface_line_width = 0.5
-raft_margin = 15
 raft_surface_line_width = 0.2
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)

resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg

@@ -24,7 +24,6 @@ raft_airgap = 0.15
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
 raft_interface_line_width = 0.5
-raft_margin = 15
 raft_surface_line_width = 0.2
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)

resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg

@@ -24,7 +24,6 @@ raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
-raft_margin = 15
 raft_surface_line_width = 0.5
 raft_surface_thickness = 0.15
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)

resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg

@@ -24,7 +24,6 @@ raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
-raft_margin = 15
 raft_surface_line_width = 0.5
 raft_surface_thickness = 0.15
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)

resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg

@@ -24,7 +24,6 @@ raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
 raft_interface_line_width = 1.2
-raft_margin = 15
 raft_surface_line_width = 0.6
 raft_surface_thickness = 0.15
 retraction_hop_enabled = 0.2

resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg

@@ -24,7 +24,6 @@ raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
 raft_interface_line_width = 1.2
-raft_margin = 15
 raft_surface_line_width = 0.6
 raft_surface_thickness = 0.15
 retraction_hop_enabled = 0.2

resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg

@@ -23,7 +23,6 @@ raft_airgap = 0.44
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
 raft_interface_line_width = 1.6
-raft_margin = 15
 raft_surface_line_width = 0.7
 raft_surface_thickness = 0.2
 retraction_hop_enabled = 0.2

resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg

@@ -23,7 +23,6 @@ raft_airgap = 0.44
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
 raft_interface_line_width = 1.6
-raft_margin = 15
 raft_surface_line_width = 0.7
 raft_surface_thickness = 0.2
 retraction_hop_enabled = 0.2

resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg

@@ -26,7 +26,6 @@ raft_base_line_spacing = 1
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
 raft_interface_line_width = 0.5
-raft_margin = 15
 raft_surface_line_width = 0.2
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30

resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg

@@ -26,7 +26,6 @@ raft_base_line_spacing = 1
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
 raft_interface_line_width = 0.5
-raft_margin = 15
 raft_surface_line_width = 0.2
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30

resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg

@@ -25,7 +25,6 @@ raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
-raft_margin = 15
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)

resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg

@@ -25,7 +25,6 @@ raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
-raft_margin = 15
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)

resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg

@@ -25,7 +25,6 @@ raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
 raft_interface_line_width = 1.2
-raft_margin = 15
 raft_surface_line_width = 0.6
 raft_surface_thickness = 0.15
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)

resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg

@@ -25,7 +25,6 @@ raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
 raft_interface_line_width = 1.2
-raft_margin = 15
 raft_surface_line_width = 0.6
 raft_surface_thickness = 0.15
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)

resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg

@@ -24,7 +24,6 @@ raft_airgap = 0.47
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
 raft_interface_line_width = 1.6
-raft_margin = 15
 raft_surface_line_width = 0.7
 raft_surface_thickness = 0.2
 speed_layer_0 = =round(speed_print * 30 / 40)

resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg

@@ -24,7 +24,6 @@ raft_airgap = 0.47
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
 raft_interface_line_width = 1.6
-raft_margin = 15
 raft_surface_line_width = 0.7
 raft_surface_thickness = 0.2
 speed_layer_0 = =round(speed_print * 30 / 40)

resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg

@@ -22,7 +22,6 @@ infill_sparse_density = 10
 raft_base_line_spacing = 2
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_margin = 12
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)

resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg

@@ -24,7 +24,6 @@ raft_base_line_spacing = 1.2
 raft_base_line_width = 0.6
 raft_interface_line_spacing = 1.2
 raft_interface_line_width = 0.57
-raft_margin = 15
 raft_surface_line_width = 0.5
 retraction_count_max = 15
 retraction_hop_enabled = 0.2

resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg

@@ -24,7 +24,6 @@ raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
-raft_margin = 15
 raft_surface_line_width = 0.38
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed

resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg

@@ -24,7 +24,6 @@ raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
-raft_margin = 15
 raft_surface_line_width = 0.38
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed

resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg

@@ -24,7 +24,6 @@ raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
 raft_interface_line_width = 1.2
-raft_margin = 15
 raft_surface_line_width = 0.57
 raft_surface_thickness = 0.2
 retraction_combing_max_distance = 50

resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg

@@ -24,7 +24,6 @@ raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
 raft_interface_line_width = 1.2
-raft_margin = 15
 raft_surface_line_width = 0.57
 raft_surface_thickness = 0.2
 retraction_combing_max_distance = 50

resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg

@@ -23,7 +23,6 @@ raft_airgap = 0.37
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
 raft_interface_line_width = 1.6
-raft_margin = 15
 raft_surface_line_width = 0.7
 raft_surface_thickness = 0.2
 speed_layer_0 = =round(speed_print * 30 / 25)

resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg

@@ -23,7 +23,6 @@ raft_airgap = 0.37
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
 raft_interface_line_width = 1.6
-raft_margin = 15
 raft_surface_line_width = 0.7
 raft_surface_thickness = 0.2
 speed_layer_0 = =round(speed_print * 30 / 30)

resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg

@@ -23,7 +23,6 @@ raft_airgap = 0.15
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
 raft_interface_line_width = 0.5
-raft_margin = 15
 raft_surface_line_width = 0.2
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)

resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg

@@ -23,7 +23,6 @@ raft_airgap = 0.15
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
 raft_interface_line_width = 0.5
-raft_margin = 15
 raft_surface_line_width = 0.2
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)

resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg

@@ -23,7 +23,6 @@ raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
-raft_margin = 15
 raft_surface_line_width = 0.5
 raft_surface_thickness = 0.15
 retraction_prime_speed = =retraction_speed

resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg

@@ -23,7 +23,6 @@ raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
-raft_margin = 15
 raft_surface_line_width = 0.5
 raft_surface_thickness = 0.15
 retraction_prime_speed = =retraction_speed

resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg

@@ -23,7 +23,6 @@ raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
 raft_interface_line_width = 1.2
-raft_margin = 15
 raft_surface_line_width = 0.6
 raft_surface_thickness = 0.15
 retraction_hop_enabled = 0.2

resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg

@@ -23,7 +23,6 @@ raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
 raft_interface_line_width = 1.2
-raft_margin = 15
 raft_surface_line_width = 0.6
 raft_surface_thickness = 0.15
 retraction_hop_enabled = 0.2

resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg

@@ -22,7 +22,6 @@ raft_airgap = 0.44
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
 raft_interface_line_width = 1.6
-raft_margin = 15
 raft_surface_line_width = 0.7
 raft_surface_thickness = 0.2
 retraction_hop_enabled = 0.2

resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg

@@ -22,7 +22,6 @@ raft_airgap = 0.44
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
 raft_interface_line_width = 1.6
-raft_margin = 15
 raft_surface_line_width = 0.7
 raft_surface_thickness = 0.2
 retraction_hop_enabled = 0.2

resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg

@@ -25,7 +25,6 @@ raft_base_line_spacing = 1
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
 raft_interface_line_width = 0.5
-raft_margin = 15
 raft_surface_line_width = 0.2
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30

resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg

@@ -25,7 +25,6 @@ raft_base_line_spacing = 1
 raft_base_line_width = 0.5
 raft_interface_line_spacing = 0.7
 raft_interface_line_width = 0.5
-raft_margin = 15
 raft_surface_line_width = 0.2
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30

resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg

@@ -24,7 +24,6 @@ raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
-raft_margin = 15
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)

resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg

@@ -24,7 +24,6 @@ raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
-raft_margin = 15
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)

resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg

@@ -24,7 +24,6 @@ raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
 raft_interface_line_width = 1.2
-raft_margin = 15
 raft_surface_line_width = 0.6
 raft_surface_thickness = 0.15
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)

resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg

@@ -24,7 +24,6 @@ raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
 raft_interface_line_spacing = 1.4
 raft_interface_line_width = 1.2
-raft_margin = 15
 raft_surface_line_width = 0.6
 raft_surface_thickness = 0.15
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)

resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg

@@ -23,7 +23,6 @@ raft_airgap = 0.47
 raft_base_line_width = 1.6
 raft_interface_line_spacing = 1.8
 raft_interface_line_width = 1.6
-raft_margin = 15
 raft_surface_line_width = 0.7
 raft_surface_thickness = 0.2
 speed_layer_0 = =round(speed_print * 30 / 40)

resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg

@@ -22,7 +22,6 @@ infill_sparse_density = 10
 raft_base_line_spacing = 2
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
-raft_margin = 12
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)

resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg

@@ -24,7 +24,6 @@ raft_base_line_spacing = 1.2
 raft_base_line_width = 0.6
 raft_interface_line_spacing = 1.2
 raft_interface_line_width = 0.57
-raft_margin = 15
 raft_surface_line_width = 0.5
 retraction_count_max = 15
 retraction_hop_enabled = 0.2

resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg

@@ -20,7 +20,6 @@ ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 retraction_min_travel = 5
 skin_overlap = 50

resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg

@@ -22,7 +22,6 @@ ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 skin_overlap = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)

resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg

@@ -22,7 +22,6 @@ ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 skin_overlap = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)

resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg

@@ -21,7 +21,6 @@ ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 skin_overlap = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)

resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg

@@ -21,7 +21,6 @@ ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 skin_overlap = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)

resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg

@@ -22,7 +22,6 @@ prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30

resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg

@@ -23,7 +23,6 @@ prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30

resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg

@@ -23,7 +23,6 @@ prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30

resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg

@@ -18,7 +18,6 @@ cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
 raft_airgap = 0.5
-raft_margin = 15
 skin_overlap = 0
 speed_layer_0 = =math.ceil(speed_print * 15 / 50)
 speed_print = 50

resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg

@@ -19,7 +19,6 @@ cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
 layer_height = 0.4
 material_print_temperature_layer_0 = =material_print_temperature
 raft_airgap = 0.5
-raft_margin = 15
 skin_overlap = 0
 speed_layer_0 = =math.ceil(speed_print * 15 / 50)
 speed_print = 50

resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg

@@ -20,7 +20,6 @@ layer_height = 0.3
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature
 raft_airgap = 0.5
-raft_margin = 15
 skin_overlap = 0
 speed_layer_0 = =math.ceil(speed_print * 15 / 50)
 speed_print = 50

resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg

@@ -24,7 +24,6 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 15
 prime_tower_enable = True
-raft_margin = 10
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 35 / 45)

resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg

@@ -24,7 +24,6 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False
-raft_margin = 10
 speed_infill = =math.ceil(speed_print * 30 / 30)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)

resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg

@@ -20,7 +20,6 @@ ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 retraction_min_travel = 5
 skin_overlap = 50

resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg

@@ -21,7 +21,6 @@ ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50

resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg

@@ -21,7 +21,6 @@ ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50

resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg

@@ -20,7 +20,6 @@ ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50

resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg

@@ -20,7 +20,6 @@ ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50

resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg

@@ -24,7 +24,6 @@ prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30

resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg

@@ -24,7 +24,6 @@ prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30

resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg

@@ -24,7 +24,6 @@ prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30

resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg

@@ -20,7 +20,6 @@ cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
 raft_airgap = 0.5
-raft_margin = 15
 skin_overlap = 0
 speed_layer_0 = =math.ceil(speed_print * 15 / 50)
 speed_print = 50

resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg

@@ -19,7 +19,6 @@ cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
 
 material_print_temperature_layer_0 = =material_print_temperature
 raft_airgap = 0.5
-raft_margin = 15
 skin_overlap = 0
 speed_layer_0 = =math.ceil(speed_print * 15 / 50)
 speed_print = 50

resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg

@@ -20,7 +20,6 @@ cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature
 raft_airgap = 0.5
-raft_margin = 15
 skin_overlap = 0
 speed_layer_0 = =math.ceil(speed_print * 15 / 50)
 speed_print = 50

resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg

@@ -22,7 +22,6 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 15
 prime_tower_enable = True
-raft_margin = 10
 support_angle = 70
 top_bottom_thickness = =layer_height * 4
 speed_print = 45

resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg

@@ -24,7 +24,6 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False
-raft_margin = 10
 speed_infill = =math.ceil(speed_print * 30 / 30)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)

resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg

@@ -21,7 +21,6 @@ ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 retraction_min_travel = 5
 skin_overlap = 50

resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg

@@ -21,7 +21,6 @@ ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50

resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg

@@ -21,7 +21,6 @@ ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50

resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg

@@ -20,7 +20,6 @@ ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50

resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg

@@ -20,7 +20,6 @@ ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50

resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg

@@ -22,7 +22,6 @@ prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30

resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg

@@ -22,7 +22,6 @@ prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30

resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg

@@ -24,7 +24,6 @@ prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
-raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30

resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg

@@ -20,7 +20,6 @@ cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
 raft_airgap = 0.5
-raft_margin = 15
 skin_overlap = 0
 speed_layer_0 = =math.ceil(speed_print * 15 / 50)
 speed_print = 50

resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg

@@ -19,7 +19,6 @@ cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
 
 material_print_temperature_layer_0 = =material_print_temperature
 raft_airgap = 0.5
-raft_margin = 15
 skin_overlap = 0
 speed_layer_0 = =math.ceil(speed_print * 15 / 50)
 speed_print = 50

resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg

@@ -18,7 +18,6 @@ cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature
 raft_airgap = 0.5
-raft_margin = 15
 skin_overlap = 0
 speed_layer_0 = =math.ceil(speed_print * 15 / 50)
 speed_print = 50

resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg

@@ -22,7 +22,6 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 15
 prime_tower_enable = True
-raft_margin = 10
 support_angle = 70
 top_bottom_thickness = =layer_height * 4
 speed_print = 45

resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg

@@ -24,7 +24,6 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 5
 prime_tower_enable = False
-raft_margin = 10
 speed_infill = =math.ceil(speed_print * 30 / 30)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)

resources/variants/ultimaker3_aa0.25.inst.cfg

@@ -23,7 +23,6 @@ raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
 raft_interface_thickness = =layer_height * 1.5
-raft_margin = 15
 raft_surface_layers = 2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed

resources/variants/ultimaker3_aa04.inst.cfg

@@ -19,7 +19,6 @@ raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
 raft_interface_thickness = =layer_height * 1.5
-raft_margin = 15
 raft_surface_layers = 2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2

resources/variants/ultimaker3_bb0.8.inst.cfg

@@ -39,7 +39,6 @@ raft_interface_line_spacing = 0.5
 raft_interface_line_width = 0.5
 raft_interface_speed = 20
 raft_interface_thickness = 0.2
-raft_margin = 10
 raft_speed = 25
 raft_surface_layers = 1
 retraction_hop = 2

resources/variants/ultimaker3_extended_aa0.25.inst.cfg

@@ -23,7 +23,6 @@ raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
 raft_interface_thickness = =layer_height * 1.5
-raft_margin = 15
 raft_surface_layers = 2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed

resources/variants/ultimaker3_extended_aa04.inst.cfg

@@ -19,7 +19,6 @@ raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
 raft_interface_thickness = =layer_height * 1.5
-raft_margin = 15
 raft_surface_layers = 2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2

resources/variants/ultimaker3_extended_bb0.8.inst.cfg

@@ -39,7 +39,6 @@ raft_interface_line_spacing = 0.5
 raft_interface_line_width = 0.5
 raft_interface_speed = 20
 raft_interface_thickness = 0.2
-raft_margin = 10
 raft_speed = 25
 raft_surface_layers = 1
 retraction_hop = 2

resources/variants/ultimaker_s3_aa0.25.inst.cfg

@@ -23,7 +23,6 @@ raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
 raft_interface_thickness = =layer_height * 1.5
-raft_margin = 15
 raft_surface_layers = 2
 
 retraction_min_travel = 0.7

resources/variants/ultimaker_s3_aa04.inst.cfg

@@ -19,7 +19,6 @@ raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
 raft_interface_thickness = =layer_height * 1.5
-raft_margin = 15
 raft_surface_layers = 2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2

resources/variants/ultimaker_s3_bb0.8.inst.cfg

@@ -38,7 +38,6 @@ raft_interface_line_spacing = 0.5
 raft_interface_line_width = 0.5
 raft_interface_speed = 20
 raft_interface_thickness = 0.2
-raft_margin = 10
 raft_speed = 25
 raft_surface_layers = 1
 retraction_hop = 2

resources/variants/ultimaker_s3_cc04.inst.cfg

@@ -19,7 +19,6 @@ raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
 raft_interface_thickness = =layer_height * 1.5
-raft_margin = 15
 raft_surface_layers = 2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed

resources/variants/ultimaker_s3_cc06.inst.cfg

@@ -19,7 +19,6 @@ raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
 raft_interface_line_spacing = =raft_interface_line_width + 0.2
 raft_interface_line_width = =line_width * 2
 raft_interface_thickness = =layer_height * 1.5
-raft_margin = 15
 raft_surface_layers = 2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed