Most recent updates

- Travel avoid supports
- Dual Extrusion : switch_extruder_retraction_amount = 10
- PETg updates
- Reduced infill jerk in "quick" intent and removed useless first layer jerk
- Removed no more used 1.2x material_flow_layer_0 in order to compensate a bad bed leveling
- Rewiewed forced PLA and PETg temperatures

resources/definitions/deltacomb_base.def.json

@@ -66,9 +66,10 @@
         "retraction_speed" :                 { "default_value": 40 },
         "retraction_combing" :               { "default_value": "noskin" },
         "travel_avoid_distance":             { "value": "1" },
+        "travel_avoid_supports":             { "value": "True" },
         "retraction_hop_only_when_collides": { "value": "1" },
 
-        "machine_heat_zone_length" :         { "default_value": 10 },
+        "switch_extruder_retraction_amount": { "value": 10},
         "switch_extruder_retraction_speeds": { "default_value": 70 },
 
         "top_bottom_thickness":            { "default_value": 0.8 },

resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_B.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_C.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_accurate_D.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_D.inst.cfg

@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/ABS/deltacomb_DBE0.40_ABS_quick_E.inst.cfg

@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_B.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_C.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_accurate_D.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_D.inst.cfg

@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/ABS/deltacomb_FBE0.40_ABS_quick_E.inst.cfg

@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_B.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_C.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_accurate_D.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_C.inst.cfg

@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 17
+type = intent
+quality_type = D020
+intent_category = quick
+material = generic_petg
+variant = DBE 0.40mm
+
+[values]
+speed_print = 75
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width

resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_D.inst.cfg

@@ -12,10 +12,10 @@ material = generic_petg
 variant = DBE 0.40mm
 
 [values]
+speed_print = 75
 speed_infill = =speed_print
 speed_topbottom = =speed_print
 speed_wall = =speed_print
-speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/PETG/deltacomb_DBE0.40_PETG_quick_E.inst.cfg

@@ -12,10 +12,10 @@ material = generic_petg
 variant = DBE 0.40mm
 
 [values]
+speed_print = 75
 speed_infill = =speed_print
 speed_topbottom = =speed_print
 speed_wall = =speed_print
-speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_B.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_C.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_accurate_D.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_C.inst.cfg

@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Quick
+definition = deltacomb_base
+
+[metadata]
+setting_version = 17
+type = intent
+quality_type = D015
+intent_category = quick
+material = generic_petg
+variant = FBE 0.40mm
+
+[values]
+speed_print = 75
+speed_infill = =speed_print
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 2
+fill_perimeter_gaps = nowhere
+infill_sparse_density = 15
+infill_line_width = =line_width
+jerk_print = 30
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+line_width = =machine_nozzle_size
+wall_line_width_x = =line_width

resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_D.inst.cfg

@@ -12,10 +12,10 @@ material = generic_petg
 variant = FBE 0.40mm
 
 [values]
+speed_print = 75
 speed_infill = =speed_print
 speed_topbottom = =speed_print
 speed_wall = =speed_print
-speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/PETG/deltacomb_FBE0.40_PETG_quick_E.inst.cfg

@@ -12,10 +12,10 @@ material = generic_petg
 variant = FBE 0.40mm
 
 [values]
+speed_print = 75
 speed_infill = =speed_print
 speed_topbottom = =speed_print
 speed_wall = =speed_print
-speed_wall_0 = =speed_wall
 speed_wall_x = =speed_wall
 top_bottom_thickness = =wall_thickness
 wall_thickness = =line_width * 2
@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_B.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_C.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_accurate_D.inst.cfg

@@ -15,7 +15,6 @@ variant = DBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_D.inst.cfg

@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/PLA/deltacomb_DBE0.40_PLA_quick_E.inst.cfg

@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_B.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_C.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_accurate_D.inst.cfg

@@ -15,7 +15,6 @@ variant = FBE 0.40mm
 jerk_wall = 5
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 wall_thickness = =line_width * 3
 top_bottom_thickness = =wall_thickness
 xy_offset = =-layer_height * 0.2

resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_D.inst.cfg

@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/intent/deltacomb/PLA/deltacomb_FBE0.40_PLA_quick_E.inst.cfg

@@ -23,11 +23,9 @@ fill_perimeter_gaps = nowhere
 infill_sparse_density = 15
 infill_line_width = =line_width
 jerk_print = 30
-jerk_infill = =jerk_print
 jerk_topbottom = =jerk_print
 jerk_wall = =jerk_print
 jerk_wall_0 = =jerk_wall
 jerk_wall_x = =jerk_wall
-jerk_layer_0 = 5
 line_width = =machine_nozzle_size
 wall_line_width_x = =line_width

resources/quality/deltacomb/PETG/deltacomb_DBE0.40_PETG_A.inst.cfg

@@ -11,6 +11,8 @@ material = generic_petg
 variant = DBE 0.40mm
 
 [values]
+material_print_temperature = 225
+layer_height_0 = 0.2
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,12 +21,16 @@ speed_print = 50
 speed_infill = =speed_print
 speed_wall_0 = =speed_print * 0.5
 speed_roofing = =speed_print * 0.5
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
 retraction_combing_max_distance = 5
 support_z_distance = =layer_height * 2

resources/quality/deltacomb/PETG/deltacomb_DBE0.40_PETG_B.inst.cfg

@@ -11,6 +11,8 @@ material = generic_petg
 variant = DBE 0.40mm
 
 [values]
+material_print_temperature = 225
+layer_height_0 = 0.2
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,12 +21,16 @@ speed_print = 50
 speed_infill = =speed_print
 speed_wall_0 = =speed_print * 0.5
 speed_roofing = =speed_print * 0.5
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
 retraction_combing_max_distance = 5
 support_z_distance = =layer_height * 2

resources/quality/deltacomb/PETG/deltacomb_DBE0.40_PETG_C.inst.cfg

@@ -11,6 +11,8 @@ material = generic_petg
 variant = DBE 0.40mm
 
 [values]
+material_print_temperature = 225
+layer_height_0 = 0.2
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,12 +21,16 @@ speed_print = 50
 speed_infill = =speed_print
 speed_wall_0 = =speed_print * 0.5
 speed_roofing = =speed_print * 0.5
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
 retraction_combing_max_distance = 5
 support_z_distance = =layer_height * 2

resources/quality/deltacomb/PETG/deltacomb_DBE0.40_PETG_D.inst.cfg

@@ -11,6 +11,7 @@ material = generic_petg
 variant = DBE 0.40mm
 
 [values]
+material_print_temperature = 225
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,11 +20,15 @@ speed_print = 50
 speed_infill = =speed_print
 speed_wall_0 = =speed_print * 0.5
 speed_roofing = =speed_print * 0.5
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
 retraction_combing_max_distance = 5

resources/quality/deltacomb/PETG/deltacomb_DBE0.40_PETG_E.inst.cfg

@@ -11,6 +11,7 @@ material = generic_petg
 variant = DBE 0.40mm
 
 [values]
+material_print_temperature = 225
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,11 +20,15 @@ speed_print = 50
 speed_infill = =speed_print
 speed_wall_0 = =speed_print * 0.5
 speed_roofing = =speed_print * 0.5
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
 retraction_combing_max_distance = 5

resources/quality/deltacomb/PETG/deltacomb_DBE0.60_PETG_C.inst.cfg

@@ -11,6 +11,7 @@ material = generic_petg
 variant = DBE 0.60mm
 
 [values]
+material_print_temperature = 225
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,12 +20,16 @@ speed_print = 50
 speed_infill = =speed_print
 speed_wall_0 = =speed_print * 0.5
 speed_roofing = =speed_print * 0.5
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
 retraction_combing_max_distance = 5
 support_z_distance = =layer_height * 2

resources/quality/deltacomb/PETG/deltacomb_DBE0.60_PETG_D.inst.cfg

@@ -11,6 +11,7 @@ material = generic_petg
 variant = DBE 0.60mm
 
 [values]
+material_print_temperature = 225
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,11 +20,15 @@ speed_print = 50
 speed_infill = =speed_print
 speed_wall_0 = =speed_print * 0.5
 speed_roofing = =speed_print * 0.5
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
 retraction_combing_max_distance = 5

resources/quality/deltacomb/PETG/deltacomb_DBE0.60_PETG_E.inst.cfg

@@ -11,6 +11,7 @@ material = generic_petg
 variant = DBE 0.60mm
 
 [values]
+material_print_temperature = 225
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,11 +20,15 @@ speed_print = 40
 speed_infill = =speed_print
 speed_wall_0 = =speed_print * 0.7
 speed_roofing = =speed_print * 0.7
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
 retraction_combing_max_distance = 5

resources/quality/deltacomb/PETG/deltacomb_DBE0.60_PETG_F.inst.cfg

@@ -11,6 +11,7 @@ material = generic_petg
 variant = DBE 0.60mm
 
 [values]
+material_print_temperature = 225
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,11 +20,15 @@ speed_print = 26
 speed_infill = =speed_print
 speed_wall_0 = =speed_print
 speed_roofing = =speed_print
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
 retraction_combing_max_distance = 5

resources/quality/deltacomb/PETG/deltacomb_FBE0.40_PETG_A.inst.cfg

@@ -11,6 +11,8 @@ material = generic_petg
 variant = FBE 0.40mm
 
 [values]
+material_print_temperature = 225
+layer_height_0 = 0.2
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,12 +21,16 @@ speed_print = 50
 speed_infill = =speed_print
 speed_wall_0 = =speed_print * 0.5
 speed_roofing = =speed_print * 0.5
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
 retraction_combing_max_distance = 5
 support_z_distance = =layer_height * 2

resources/quality/deltacomb/PETG/deltacomb_FBE0.40_PETG_B.inst.cfg

@@ -11,6 +11,8 @@ material = generic_petg
 variant = FBE 0.40mm
 
 [values]
+material_print_temperature = 225
+layer_height_0 = 0.2
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,12 +21,16 @@ speed_print = 50
 speed_infill = =speed_print
 speed_wall_0 = =speed_print * 0.5
 speed_roofing = =speed_print * 0.5
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
 retraction_combing_max_distance = 5
 support_z_distance = =layer_height * 2

resources/quality/deltacomb/PETG/deltacomb_FBE0.40_PETG_C.inst.cfg

@@ -11,6 +11,8 @@ material = generic_petg
 variant = FBE 0.40mm
 
 [values]
+material_print_temperature = 225
+layer_height_0 = 0.2
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,12 +21,16 @@ speed_print = 50
 speed_infill = =speed_print
 speed_wall_0 = =speed_print * 0.5
 speed_roofing = =speed_print * 0.5
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
 retraction_combing_max_distance = 5
-support_z_distance = =layer_height * 2
+support_z_distance = =layer_height * 2

resources/quality/deltacomb/PETG/deltacomb_FBE0.40_PETG_D.inst.cfg

@@ -11,6 +11,7 @@ material = generic_petg
 variant = FBE 0.40mm
 
 [values]
+material_print_temperature = 225
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,11 +20,15 @@ speed_print = 50
 speed_infill = =speed_print
 speed_wall_0 = =speed_print * 0.5
 speed_roofing = =speed_print * 0.5
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
-retraction_combing_max_distance = 5
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
+retraction_combing_max_distance = 5

resources/quality/deltacomb/PETG/deltacomb_FBE0.40_PETG_E.inst.cfg

@@ -11,6 +11,7 @@ material = generic_petg
 variant = FBE 0.40mm
 
 [values]
+material_print_temperature = 225
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,11 +20,15 @@ speed_print = 50
 speed_infill = =speed_print
 speed_wall_0 = =speed_print * 0.5
 speed_roofing = =speed_print * 0.5
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
-retraction_combing_max_distance = 5
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
+retraction_combing_max_distance = 5

resources/quality/deltacomb/PETG/deltacomb_FBE0.60_PETG_C.inst.cfg

@@ -11,6 +11,7 @@ material = generic_petg
 variant = FBE 0.60mm
 
 [values]
+material_print_temperature = 225
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,12 +20,16 @@ speed_print = 50
 speed_infill = =speed_print
 speed_wall_0 = =speed_print * 0.5
 speed_roofing = =speed_print * 0.5
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
 retraction_combing_max_distance = 5
-support_z_distance = =layer_height * 2
+support_z_distance = =layer_height * 2

resources/quality/deltacomb/PETG/deltacomb_FBE0.60_PETG_D.inst.cfg

@@ -11,6 +11,7 @@ material = generic_petg
 variant = FBE 0.60mm
 
 [values]
+material_print_temperature = 225
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,11 +20,15 @@ speed_print = 50
 speed_infill = =speed_print
 speed_wall_0 = =speed_print * 0.5
 speed_roofing = =speed_print * 0.5
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
-retraction_combing_max_distance = 5
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
+retraction_combing_max_distance = 5

resources/quality/deltacomb/PETG/deltacomb_FBE0.60_PETG_E.inst.cfg

@@ -11,6 +11,7 @@ material = generic_petg
 variant = FBE 0.60mm
 
 [values]
+material_print_temperature = 225
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,11 +20,15 @@ speed_print = 40
 speed_infill = =speed_print
 speed_wall_0 = =speed_print * 0.7
 speed_roofing = =speed_print * 0.7
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
-retraction_combing_max_distance = 5
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
+retraction_combing_max_distance = 5

resources/quality/deltacomb/PETG/deltacomb_FBE0.60_PETG_F.inst.cfg

@@ -11,6 +11,7 @@ material = generic_petg
 variant = FBE 0.60mm
 
 [values]
+material_print_temperature = 225
 cool_fan_full_at_height = 1
 cool_fan_speed = 60
 cool_fan_speed_max = 100
@@ -19,11 +20,15 @@ speed_print = 26
 speed_infill = =speed_print
 speed_wall_0 = =speed_print
 speed_roofing = =speed_print
-default_material_print_temperature = 235
 material_bed_temperature = 60
 material_bed_temperature_layer_0 = 45
+material_flow = 95
+infill_enable_travel_optimization = True
 initial_layer_line_width_factor = 120
-retraction_speed = 40
+retraction_amount = 5
 coasting_enable = True
 coasting_volume = 0.256
+coasting_min_volume = 3
+coasting_speed = 70
+travel_avoid_other_parts = False
 retraction_combing_max_distance = 5

resources/quality/deltacomb/PLA/deltacomb_DBE0.25_PLA_A.inst.cfg

@@ -15,5 +15,4 @@ cool_fan_full_at_height = =layer_height * 4
 cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_DBE0.25_PLA_B.inst.cfg

@@ -16,5 +16,4 @@ cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
 speed_print = 55
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_DBE0.25_PLA_C.inst.cfg

@@ -16,5 +16,4 @@ cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
 speed_print = 32
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_DBE0.40_PLA_A.inst.cfg

@@ -15,5 +15,4 @@ cool_fan_full_at_height = =layer_height * 4
 cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_DBE0.40_PLA_B.inst.cfg

@@ -15,5 +15,4 @@ cool_fan_full_at_height = =layer_height * 4
 cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_DBE0.40_PLA_C.inst.cfg

@@ -15,5 +15,4 @@ cool_fan_full_at_height = =layer_height * 4
 cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_DBE0.40_PLA_D.inst.cfg

@@ -15,5 +15,4 @@ cool_fan_full_at_height = =layer_height * 4
 cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_DBE0.40_PLA_E.inst.cfg

@@ -15,5 +15,4 @@ cool_fan_full_at_height = =layer_height * 4
 cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_DBE0.60_PLA_C.inst.cfg

@@ -15,5 +15,4 @@ cool_fan_full_at_height = =layer_height * 4
 cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_DBE0.60_PLA_D.inst.cfg

@@ -15,5 +15,4 @@ cool_fan_full_at_height = =layer_height * 4
 cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_DBE0.60_PLA_E.inst.cfg

@@ -16,5 +16,4 @@ cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
 speed_print = 65
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_DBE0.60_PLA_F.inst.cfg

@@ -16,5 +16,4 @@ cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
 speed_print = 45
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_FBE0.25_PLA_A.inst.cfg

@@ -15,5 +15,4 @@ cool_fan_full_at_height = =layer_height * 4
 cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_FBE0.25_PLA_B.inst.cfg

@@ -16,5 +16,4 @@ cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
 speed_print = 55
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_FBE0.25_PLA_C.inst.cfg

@@ -16,5 +16,4 @@ cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
 speed_print = 32
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_FBE0.40_PLA_A.inst.cfg

@@ -15,5 +15,4 @@ cool_fan_full_at_height = =layer_height * 4
 cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_FBE0.40_PLA_B.inst.cfg

@@ -15,5 +15,4 @@ cool_fan_full_at_height = =layer_height * 4
 cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_FBE0.40_PLA_C.inst.cfg

@@ -15,5 +15,4 @@ cool_fan_full_at_height = =layer_height * 4
 cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_FBE0.40_PLA_D.inst.cfg

@@ -15,5 +15,4 @@ cool_fan_full_at_height = =layer_height * 4
 cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_FBE0.40_PLA_E.inst.cfg

@@ -15,5 +15,4 @@ cool_fan_full_at_height = =layer_height * 4
 cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_FBE0.60_PLA_C.inst.cfg

@@ -15,5 +15,4 @@ cool_fan_full_at_height = =layer_height * 4
 cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_FBE0.60_PLA_D.inst.cfg

@@ -15,5 +15,4 @@ cool_fan_full_at_height = =layer_height * 4
 cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_FBE0.60_PLA_E.inst.cfg

@@ -16,5 +16,4 @@ cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
 speed_print = 65
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_FBE0.60_PLA_F.inst.cfg

@@ -16,5 +16,4 @@ cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
 speed_print = 45
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_VDBE0.80_PLA_D.inst.cfg

@@ -16,5 +16,4 @@ cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
 speed_print = 150
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_VDBE0.80_PLA_E.inst.cfg

@@ -16,5 +16,4 @@ cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
 speed_print = 110
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_VDBE0.80_PLA_F.inst.cfg

@@ -16,5 +16,4 @@ cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
 speed_print = 75
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_VDBE0.80_PLA_G.inst.cfg

@@ -16,5 +16,4 @@ cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
 speed_print = 55
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_VFBE0.80_PLA_D.inst.cfg

@@ -16,5 +16,4 @@ cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
 speed_print = 150
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_VFBE0.80_PLA_E.inst.cfg

@@ -16,5 +16,4 @@ cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
 speed_print = 110
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_VFBE0.80_PLA_F.inst.cfg

@@ -16,5 +16,4 @@ cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
 speed_print = 75
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/PLA/deltacomb_VFBE0.80_PLA_G.inst.cfg

@@ -16,5 +16,4 @@ cool_fan_speed = 100
 cool_fan_speed_max = 100
 cool_fan_speed_min = 100
 speed_print = 55
-material_bed_temperature = 45
-default_material_print_temperature = 210
+material_bed_temperature = 45

resources/quality/deltacomb/deltacomb_global_A.inst.cfg

@@ -18,7 +18,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 10
 cool_min_speed = 5
-material_flow_layer_0 = =material_flow * 1.2
 material_print_temperature_layer_0 = =default_material_print_temperature + 5
 support_angle = 80
 prime_tower_brim_enable = False

resources/quality/deltacomb/deltacomb_global_B.inst.cfg

@@ -17,7 +17,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 10
 cool_min_speed = 5
-material_flow_layer_0 = =material_flow * 1.2
 material_print_temperature_layer_0 = =default_material_print_temperature + 5
 support_angle = 65
 prime_tower_brim_enable = False

resources/quality/deltacomb/deltacomb_global_C.inst.cfg

@@ -17,7 +17,6 @@ cool_fan_enabled = True
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 10
 cool_min_speed = 5
-material_flow_layer_0 = =material_flow * 1.2
 material_print_temperature_layer_0 = =default_material_print_temperature + 5
 support_angle = 55
 prime_tower_brim_enable = False

resources/quality/deltacomb/deltacomb_global_D.inst.cfg

@@ -17,6 +17,5 @@ cool_fan_enabled = True
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 10
 cool_min_speed = 5
-material_flow_layer_0 = =material_flow * 1.2
 material_print_temperature_layer_0 = =default_material_print_temperature + 5
 prime_tower_brim_enable = False

resources/quality/deltacomb/deltacomb_global_E.inst.cfg

@@ -17,6 +17,5 @@ cool_fan_enabled = True
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 10
 cool_min_speed = 5
-material_flow_layer_0 = =material_flow * 1.2
 material_print_temperature_layer_0 = =default_material_print_temperature + 5
 prime_tower_brim_enable = False

resources/quality/deltacomb/deltacomb_global_F.inst.cfg

@@ -17,6 +17,5 @@ cool_fan_enabled = True
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 10
 cool_min_speed = 5
-material_flow_layer_0 = =material_flow * 1.2
 material_print_temperature_layer_0 = =default_material_print_temperature + 5
 prime_tower_brim_enable = False

resources/quality/deltacomb/deltacomb_global_G.inst.cfg

@@ -17,6 +17,5 @@ cool_fan_enabled = True
 cool_min_layer_time = 10
 cool_min_layer_time_fan_speed_max = 10
 cool_min_speed = 5
-material_flow_layer_0 = =material_flow * 1.2
 material_print_temperature_layer_0 = =default_material_print_temperature + 5
 prime_tower_brim_enable = False