Updating Eryone Thinker Definition

Added changes again due to for reconcile stomping the original
This commit is contained in:
Demetrius Apostolopoulos 2021-09-10 18:19:45 -07:00
parent 1813f9af58
commit ef9d7da55d

View File

@ -12,7 +12,7 @@
"platform_texture": "eryone_thinker_plate.png",
"platform_offset": [0, -120, 0],
"has_materials": true,
"preferred_material": "generic_pla",
"preferred_material": "eryone_pla",
"has_machine_quality": true,
"preferred_quality_type": "normal",
"machine_extruder_trains":
@ -57,10 +57,10 @@
"default_value": "Marlin"
},
"machine_start_gcode": {
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z10.0 F600 ;move the platform down 10mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Y-3 F1200 ;move to prime\nG1 X10 F1200 ;\nG1 Z0.1 F600 ;get ready to prime\nG1 X120 E15 F1200 ;prime nozzle \nG1 X120 F3600 ;quick wipe\nG92 E0 ;zero the extruded length\nG5 ;enable resume from power failure\nM117 Printing..."
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z10.0 F600 ;move the platform down 10mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Y-3 F1200 ;move to prime\nG1 X10 F1200 ;\nG1 Z0.1 F600 ;get ready to prime\nG1 X120 E15 F1200 ;prime nozzle \nG1 X120 F3600 ;quick wipe\nG92 E0 ;zero the extruded length\nM413 S1 ;enable resume from power failure\nM117 Printing..."
},
"machine_end_gcode": {
"default_value": "M104 S0 ;turn off extruder\nM140 S0 ;turn off bed\nM107 ;turn off all fans\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 E-5 F300\nG1 Z+0.5 E-5 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG1 X0 Y250 F4800 ; position for easy part removal\nM84 ;steppers off"
"default_value": "M104 S0 ;turn off extruder\nM140 S0 ;turn off bed\nM107 ;turn off all fans\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG1 X0 Y250 F4800 ; position for easy part removal\nM84 ;steppers off"
},
"acceleration_enabled": {
"value": true
@ -160,7 +160,7 @@
"value": 10
},
"skirt_brim_speed": {
"value": 40
"value": "math.ceil(speed_print * 40 / 60)"
},
"skirt_gap": {
"value": 5
@ -229,7 +229,7 @@
"value": 3
},
"wall_thickness": {
"value": "1.2"
"value": "line_width * wall_line_count"
},
"bottom_layers": {
"value": "4"