diff --git a/resources/variants/cartesio_0.4.inst.cfg b/resources/variants/cartesio_0.4.inst.cfg
index 43bed9bfbd..58637bbba7 100644
--- a/resources/variants/cartesio_0.4.inst.cfg
+++ b/resources/variants/cartesio_0.4.inst.cfg
@@ -10,3 +10,58 @@ type = variant
 [values]
 machine_nozzle_size = 0.4
 machine_nozzle_tip_outer_diameter = 0.8
+
+infill_line_width = 0.5
+
+wall_thickness = 1.2
+top_bottom_thickness = 0.8
+wall_0_inset = -0.05
+fill_perimeter_gaps = nowhere
+travel_compensate_overlapping_walls_enabled =
+
+infill_sparse_density = 40
+infill_pattern = grid
+
+default_material_print_temperature = =material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+material_diameter = 1.75
+retraction_amount = 1
+retraction_min_travel = =round(line_width * 10)
+retraction_prime_speed = 10
+switch_extruder_retraction_amount = 2
+switch_extruder_retraction_speeds = =round(retraction_speed)
+switch_extruder_prime_speed = =round(retraction_prime_speed)
+
+speed_print = 30
+speed_infill = =round(speed_print)
+speed_layer_0 = =round(speed_print / 5 * 4)
+speed_wall = =round(speed_print / 2)
+speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_topbottom = =round(speed_print / 5 * 4)
+speed_slowdown_layers = 1
+speed_travel = =round(speed_print if magic_spiralize else 150)
+speed_travel_layer_0 = =round(speed_travel)
+speed_support_interface = =round(speed_topbottom)
+
+retraction_combing = off
+retraction_hop_enabled = True
+retraction_hop = 1
+
+cool_min_layer_time_fan_speed_max = =round(cool_min_layer_time)
+cool_min_layer_time = 20
+
+support_z_distance = 0
+support_xy_distance = 0.5
+support_join_distance = 10
+support_interface_enable = True
+
+adhesion_type = skirt
+skirt_gap = 0.5
+skirt_brim_minimal_length = 50
+
+coasting_enable = True
+coasting_volume = 0.1
+coasting_min_volume = 0.17
+coasting_speed = 90