Updated PLA PVA N12CF 175 settings

PP-475

resources/definitions/ultimaker_methodx.def.json

@@ -23,19 +23,7 @@
             "fabtotum_",
             "fdplast_",
             "filo3d_",
-            "generic_asa_175",
+            "generic_",
-            "generic_abs_175",
-            "generic_bvoh_175",
-            "generic_petg_175",
-            "generic_pla_175",
-            "generic_tough_pla_175",
-            "generic_pva_175",
-            "generic_cffpa_175",
-            "generic_cpe_175",
-            "generic_nylon_175",
-            "generic_hips_175",
-            "generic_pc_175",
-            "generic_tpu_175",
             "goofoo_",
             "ideagen3D_",
             "imade3d_",
@@ -48,6 +36,8 @@
             "polywood_pla",
             "redd_",
             "tizyx_",
+            "ultimaker_pla_175",
+            "ultimaker_tough_pla_175",
             "verbatim_",
             "Vertex_",
             "volumic_",
@@ -70,7 +60,6 @@
             0,
             16
         ],
-        "platform_texture": "MakerbotMethod.png",
         "preferred_material": "ultimaker_absr_175",
         "preferred_quality_type": "draft",
         "preferred_variant_name": "1XA",
@@ -116,7 +105,13 @@
         "machine_height": { "default_value": 196 },
         "machine_name": { "default_value": "UltiMaker Method X" },
         "machine_width": { "default_value": 283.3 },
+        "material_flow": {
+          "value": 97
+        },
         "prime_tower_position_x": { "value": "(150 / 2 + resolveOrValue('prime_tower_size') / 2) if resolveOrValue('machine_shape') == 'elliptic' else (150 - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_x'))), 1)) - (150 / 2 if resolveOrValue('machine_center_is_zero') else 0)" },
-        "prime_tower_position_y": { "value": "190 - prime_tower_size - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_y'))), 1) - (190 / 2 if resolveOrValue('machine_center_is_zero') else 0)" }
+        "prime_tower_position_y": { "value": "190 - prime_tower_size - (resolveOrValue('prime_tower_base_size') if (resolveOrValue('adhesion_type') == 'raft' or resolveOrValue('prime_tower_brim_enable')) else 0) - max(max(extruderValues('travel_avoid_distance')) + max(extruderValues('support_offset')) + (extruderValue(skirt_brim_extruder_nr, 'skirt_brim_line_width') * extruderValue(skirt_brim_extruder_nr, 'skirt_line_count') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 + extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if resolveOrValue('adhesion_type') == 'skirt' else 0) + (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0), max(map(abs, extruderValues('machine_nozzle_offset_y'))), 1) - (190 / 2 if resolveOrValue('machine_center_is_zero') else 0)" },
+        "skin_material_flow": {
+          "value": "0.95*material_flow"
+        }
     }
 }

resources/definitions/ultimaker_methodxl.def.json

@@ -18,12 +18,6 @@
             "0": "ultimaker_methodxl_extruder_left",
             "1": "ultimaker_methodxl_extruder_right"
         },
-        "platform_offset": [
-            0,
-            0,
-            0
-        ],
-        "platform_texture": "MakerbotMethod.png",
         "preferred_quality_type": "draft",
         "reference_machine_id": "magma_10",
         "supports_network_connection": true,

resources/extruders/ultimaker_method_extruder_left.def.json

@@ -2,24 +2,28 @@
     "version": 2,
     "name": "Extruder 1",
     "inherits": "fdmextruder",
-    "metadata":
+    "metadata": {
-    {
         "machine": "ultimaker_method",
         "position": "0"
     },
-    "overrides":
+
-    {
+    "overrides": {
-        "extruder_nr":
+        "extruder_nr": {
-        {
             "default_value": 0,
-            "maximum_value": "1"
+            "maximum_value": 1
         },
-        "machine_extruder_end_code": { "default_value": "M106 P{extruder_nr} S1.0\nG91\nG0 Z0.4 F600\nG90\nG0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000" },
+        "machine_nozzle_size": { "default_value": 0.4 },
-        "machine_extruder_start_code": { "default_value": "G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000\nM104 S{material_print_temperature}\nG4 S5\nG91\nG0 Z-0.4 F600\nG90\nM107 P{(extruder_nr+1)%2}\nM106 P{extruder_nr} S{cool_fan_speed_0/100}" },
+        "material_diameter": { "default_value": 1.75 },
-        "machine_extruder_start_code_duration": { "default_value": 8 },
         "machine_nozzle_offset_x": { "default_value": 0 },
         "machine_nozzle_offset_y": { "default_value": 0 },
-        "machine_nozzle_size": { "default_value": 0.4 },
+        "machine_extruder_start_code": {
-        "material_diameter": { "default_value": 1.75 }
+            "default_value": "G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000\nM104 S{material_print_temperature}\nG4 S5\nG91\nG0 Z-0.4 F600\nG90\nM107 P{(extruder_nr+1)%2}\nM106 P{extruder_nr} S{cool_fan_speed_0/100}"
+        },
+        "machine_extruder_end_code": {
+            "default_value": "M106 P{extruder_nr} S1.0\nG91\nG0 Z0.4 F600\nG90\nG0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000"
+        },
+        "machine_extruder_start_code_duration": {
+            "default_value":8
+        }
     }
-}
+}

resources/extruders/ultimaker_method_extruder_right.def.json

@@ -2,24 +2,28 @@
     "version": 2,
     "name": "Extruder 2",
     "inherits": "fdmextruder",
-    "metadata":
+    "metadata": {
-    {
         "machine": "ultimaker_method",
         "position": "1"
     },
-    "overrides":
+
-    {
+    "overrides": {
-        "extruder_nr":
+        "extruder_nr": {
-        {
             "default_value": 1,
-            "maximum_value": "1"
+            "maximum_value": 1
         },
-        "machine_extruder_end_code": { "default_value": "M106 P{extruder_nr} S1.0\nG91\nG0 Z0.4 F600\nG90\nG0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000" },
+        "machine_nozzle_size": { "default_value": 0.4 },
-        "machine_extruder_start_code": { "default_value": "G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000\nM104 S{material_print_temperature}\nG4 S5\nG91\nG0 Z-0.4 F600\nG90\nM107 P{(extruder_nr+1)%2}\nM106 P{extruder_nr} S{cool_fan_speed_0/100}" },
+        "material_diameter": { "default_value": 1.75 },
-        "machine_extruder_start_code_duration": { "default_value": 8 },
         "machine_nozzle_offset_x": { "default_value": 0 },
         "machine_nozzle_offset_y": { "default_value": 0 },
-        "machine_nozzle_size": { "default_value": 0.4 },
+        "machine_extruder_start_code": {
-        "material_diameter": { "default_value": 1.75 }
+            "default_value": "G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000\nM104 S{material_print_temperature}\nG4 S5\nG91\nG0 Z-0.4 F600\nG90\nM107 P{(extruder_nr+1)%2}\nM106 P{extruder_nr} S{cool_fan_speed_0/100}"
+        },
+        "machine_extruder_end_code": {
+            "default_value": "M106 P{extruder_nr} S1.0\nG91\nG0 Z0.4 F600\nG90\nG0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000"
+        },
+        "machine_extruder_start_code_duration": {
+            "default_value":8
+        }
     }
-}
+}

resources/extruders/ultimaker_methodx_extruder_left.def.json

@@ -2,24 +2,28 @@
     "version": 2,
     "name": "Extruder 1",
     "inherits": "fdmextruder",
-    "metadata":
+    "metadata": {
-    {
         "machine": "ultimaker_methodx",
         "position": "0"
     },
-    "overrides":
+
-    {
+    "overrides": {
-        "extruder_nr":
+        "extruder_nr": {
-        {
             "default_value": 0,
             "maximum_value": "1"
         },
-        "machine_extruder_end_code": { "default_value": "M106 P{extruder_nr} S1.0\nG91\nG0 Z0.4 F600\nG90\nG0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000" },
+        "machine_nozzle_size": { "default_value": 0.4 },
-        "machine_extruder_start_code": { "default_value": "G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000\nM104 S{material_print_temperature}\nG4 S5\nG91\nG0 Z-0.4 F600\nG90\nM107 P{(extruder_nr+1)%2}\nM106 P{extruder_nr} S{cool_fan_speed_0/100}" },
+        "material_diameter": { "default_value": 1.75 },
-        "machine_extruder_start_code_duration": { "default_value": 8 },
         "machine_nozzle_offset_x": { "default_value": 0 },
         "machine_nozzle_offset_y": { "default_value": 0 },
-        "machine_nozzle_size": { "default_value": 0.4 },
+        "machine_extruder_start_code": {
-        "material_diameter": { "default_value": 1.75 }
+            "default_value": "G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000\nM104 S{material_print_temperature}\nG4 S5\nG91\nG0 Z-0.4 F600\nG90\nM107 P{(extruder_nr+1)%2}\nM106 P{extruder_nr} S{cool_fan_speed_0/100}"
+        },
+        "machine_extruder_end_code": {
+            "default_value": "M106 P{extruder_nr} S1.0\nG91\nG0 Z0.4 F600\nG90\nG0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000"
+        },
+        "machine_extruder_start_code_duration": {
+            "default_value":8
+        }
     }
-}
+}

resources/extruders/ultimaker_methodx_extruder_right.def.json

@@ -2,24 +2,28 @@
     "version": 2,
     "name": "Extruder 2",
     "inherits": "fdmextruder",
-    "metadata":
+    "metadata": {
-    {
         "machine": "ultimaker_methodx",
         "position": "1"
     },
-    "overrides":
+
-    {
+    "overrides": {
-        "extruder_nr":
+        "extruder_nr": {
-        {
             "default_value": 1,
             "maximum_value": "1"
         },
-        "machine_extruder_end_code": { "default_value": "M106 P{extruder_nr} S1.0\nG91\nG0 Z0.4 F600\nG90\nG0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000" },
+        "machine_nozzle_size": { "default_value": 0.4 },
-        "machine_extruder_start_code": { "default_value": "G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000\nM104 S{material_print_temperature}\nG4 S5\nG91\nG0 Z-0.4 F600\nG90\nM107 P{(extruder_nr+1)%2}\nM106 P{extruder_nr} S{cool_fan_speed_0/100}" },
+        "material_diameter": { "default_value": 1.75 },
-        "machine_extruder_start_code_duration": { "default_value": 8 },
         "machine_nozzle_offset_x": { "default_value": 0 },
         "machine_nozzle_offset_y": { "default_value": 0 },
-        "machine_nozzle_size": { "default_value": 0.4 },
+        "machine_extruder_start_code": {
-        "material_diameter": { "default_value": 1.75 }
+            "default_value": "G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000\nM104 S{material_print_temperature}\nG4 S5\nG91\nG0 Z-0.4 F600\nG90\nM107 P{(extruder_nr+1)%2}\nM106 P{extruder_nr} S{cool_fan_speed_0/100}"
+        },
+        "machine_extruder_end_code": {
+            "default_value": "M106 P{extruder_nr} S1.0\nG91\nG0 Z0.4 F600\nG90\nG0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000"
+        },
+        "machine_extruder_start_code_duration": {
+            "default_value":8
+        }
     }
-}
+}

resources/extruders/ultimaker_methodxl_extruder_left.def.json

@@ -2,24 +2,28 @@
     "version": 2,
     "name": "Extruder 1",
     "inherits": "fdmextruder",
-    "metadata":
+    "metadata": {
-    {
         "machine": "ultimaker_methodxl",
         "position": "0"
     },
-    "overrides":
+
-    {
+    "overrides": {
-        "extruder_nr":
+        "extruder_nr": {
-        {
             "default_value": 0,
             "maximum_value": "1"
         },
-        "machine_extruder_end_code": { "default_value": "M106 P{extruder_nr} S1.0\nG91\nG0 Z0.4 F600\nG90\nG0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000" },
+        "machine_nozzle_size": { "default_value": 0.4 },
-        "machine_extruder_start_code": { "default_value": "G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000\nM104 S{material_print_temperature}\nG4 S5\nG91\nG0 Z-0.4 F600\nG90\nM107 P{(extruder_nr+1)%2}\nM106 P{extruder_nr} S{cool_fan_speed/100}" },
+        "material_diameter": { "default_value": 1.75 },
-        "machine_extruder_start_code_duration": { "default_value": 10 },
         "machine_nozzle_offset_x": { "default_value": 0 },
         "machine_nozzle_offset_y": { "default_value": 0 },
-        "machine_nozzle_size": { "default_value": 0.4 },
+        "machine_extruder_start_code": {
-        "material_diameter": { "default_value": 1.75 }
+            "default_value": "G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000\nM104 S{material_print_temperature}\nG4 S5\nG91\nG0 Z-0.4 F600\nG90\nM107 P{(extruder_nr+1)%2}\nM106 P{extruder_nr} S{cool_fan_speed_0/100}"
+        },
+        "machine_extruder_end_code": {
+            "default_value": "M106 P{extruder_nr} S1.0\nG91\nG0 Z0.4 F600\nG90\nG0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000"
+        },
+        "machine_extruder_start_code_duration": {
+            "default_value":10
+        }
     }
-}
+}

resources/extruders/ultimaker_methodxl_extruder_right.def.json

@@ -2,24 +2,28 @@
     "version": 2,
     "name": "Extruder 2",
     "inherits": "fdmextruder",
-    "metadata":
+    "metadata": {
-    {
         "machine": "ultimaker_methodxl",
         "position": "1"
     },
-    "overrides":
+
-    {
+    "overrides": {
-        "extruder_nr":
+        "extruder_nr": {
-        {
             "default_value": 1,
             "maximum_value": "1"
         },
-        "machine_extruder_end_code": { "default_value": "M106 P{extruder_nr} S1.0\nG91\nG0 Z0.4 F600\nG90\nG0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000" },
+        "machine_nozzle_size": { "default_value": 0.4 },
-        "machine_extruder_start_code": { "default_value": "G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000\nM104 S{material_print_temperature}\nG4 S5\nG91\nG0 Z-0.4 F600\nG90\nM107 P{(extruder_nr+1)%2}\nM106 P{extruder_nr} S{cool_fan_speed/100}" },
+        "material_diameter": { "default_value": 1.75 },
-        "machine_extruder_start_code_duration": { "default_value": 10 },
         "machine_nozzle_offset_x": { "default_value": 0 },
         "machine_nozzle_offset_y": { "default_value": 0 },
-        "machine_nozzle_size": { "default_value": 0.4 },
+        "machine_extruder_start_code": {
-        "material_diameter": { "default_value": 1.75 }
+            "default_value": "G0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000\nM104 S{material_print_temperature}\nG4 S5\nG91\nG0 Z-0.4 F600\nG90\nM107 P{(extruder_nr+1)%2}\nM106 P{extruder_nr} S{cool_fan_speed_0/100}"
+        },
+        "machine_extruder_end_code": {
+            "default_value": "M106 P{extruder_nr} S1.0\nG91\nG0 Z0.4 F600\nG90\nG0 X{prime_tower_position_x - prime_tower_size/2} Y{prime_tower_position_y + prime_tower_size/2} F6000"
+        },
+        "machine_extruder_start_code_duration": {
+            "default_value":10
+        }
     }
-}
+}

resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_solid.inst.cfg

@@ -4,12 +4,12 @@ name = Solid
 version = 4
 
 [metadata]
-intent_category = solid
+setting_version = 23
+variant = 1A
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
+intent_category = solid
 type = intent
-variant = 1A
 
 [values]
 build_volume_temperature = 47

resources/intent/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg

@@ -4,12 +4,12 @@ name = Solid
 version = 4
 
 [metadata]
-intent_category = solid
+setting_version = 23
+variant = 1C
 material = ultimaker_nylon12-cf_175
 quality_type = draft
-setting_version = 23
+intent_category = solid
 type = intent
-variant = 1C
 
 [values]
 infill_pattern = lines

resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_solid.inst.cfg

@@ -4,12 +4,12 @@ name = Solid
 version = 4
 
 [metadata]
-intent_category = solid
+setting_version = 23
+variant = 1C
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
+intent_category = solid
 type = intent
-variant = 1C
 
 [values]
 build_volume_temperature = 47

resources/intent/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg

@@ -4,12 +4,12 @@ name = Solid
 version = 4
 
 [metadata]
-intent_category = solid
+setting_version = 23
+variant = LABS
 material = ultimaker_nylon12-cf_175
 quality_type = draft
-setting_version = 23
+intent_category = solid
 type = intent
-variant = LABS
 
 [values]
 infill_pattern = lines

resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_solid.inst.cfg

@@ -4,12 +4,12 @@ name = Solid
 version = 4
 
 [metadata]
-intent_category = solid
+setting_version = 23
+variant = LABS
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
+intent_category = solid
 type = intent
-variant = LABS
 
 [values]
 build_volume_temperature = 47

resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_solid.inst.cfg

@@ -4,12 +4,12 @@ name = Solid
 version = 4
 
 [metadata]
-intent_category = solid
+setting_version = 23
+variant = 1A
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
+intent_category = solid
 type = intent
-variant = 1A
 
 [values]
 build_volume_temperature = 47

resources/intent/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg

@@ -4,13 +4,12 @@ name = Solid
 version = 4
 
 [metadata]
-intent_category = solid
+setting_version = 23
-is_experimental = True
+variant = 1C
 material = ultimaker_nylon12-cf_175
 quality_type = draft
-setting_version = 23
+intent_category = solid
 type = intent
-variant = 1C
 
 [values]
 infill_pattern = lines

resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_solid.inst.cfg

@@ -4,12 +4,12 @@ name = Solid
 version = 4
 
 [metadata]
-intent_category = solid
+setting_version = 23
+variant = 1C
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
+intent_category = solid
 type = intent
-variant = 1C
 
 [values]
 build_volume_temperature = 47

resources/intent/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg

@@ -4,13 +4,12 @@ name = Solid
 version = 4
 
 [metadata]
-intent_category = solid
+setting_version = 23
-is_experimental = True
+variant = LABS
 material = ultimaker_nylon12-cf_175
 quality_type = draft
-setting_version = 23
+intent_category = solid
 type = intent
-variant = LABS
 
 [values]
 infill_pattern = lines

resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_solid.inst.cfg

@@ -4,12 +4,12 @@ name = Solid
 version = 4
 
 [metadata]
-intent_category = solid
+setting_version = 23
+variant = LABS
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
+intent_category = solid
 type = intent
-variant = LABS
 
 [values]
 build_volume_temperature = 47

resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_solid.inst.cfg

@@ -4,16 +4,16 @@ name = Solid
 version = 4
 
 [metadata]
-intent_category = solid
+setting_version = 23
+variant = 1A
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
+intent_category = solid
 type = intent
-variant = 1A
 
 [values]
-build_plate_temperature = 45
 build_volume_temperature = 45
 infill_pattern = lines
 infill_sparse_density = 100
+material_bed_temperature = 45
 

resources/intent/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm_solid.inst.cfg

@@ -4,13 +4,12 @@ name = Solid
 version = 4
 
 [metadata]
-intent_category = solid
+setting_version = 23
-is_experimental = True
+variant = 1C
 material = ultimaker_nylon12-cf_175
 quality_type = draft
-setting_version = 23
+intent_category = solid
 type = intent
-variant = 1C
 
 [values]
 infill_pattern = lines

resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_solid.inst.cfg

@@ -4,16 +4,16 @@ name = Solid
 version = 4
 
 [metadata]
-intent_category = solid
+setting_version = 23
+variant = 1C
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
+intent_category = solid
 type = intent
-variant = 1C
 
 [values]
-build_plate_temperature = 45
 build_volume_temperature = 45
 infill_pattern = lines
 infill_sparse_density = 100
+material_bed_temperature = 45
 

resources/intent/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm_solid.inst.cfg

@@ -4,13 +4,12 @@ name = Solid
 version = 4
 
 [metadata]
-intent_category = solid
+setting_version = 23
-is_experimental = True
+variant = LABS
 material = ultimaker_nylon12-cf_175
 quality_type = draft
-setting_version = 23
+intent_category = solid
 type = intent
-variant = LABS
 
 [values]
 infill_pattern = lines

resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_solid.inst.cfg

@@ -4,16 +4,16 @@ name = Solid
 version = 4
 
 [metadata]
-intent_category = solid
+setting_version = 23
+variant = LABS
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
+intent_category = solid
 type = intent
-variant = LABS
 
 [values]
-build_plate_temperature = 45
 build_volume_temperature = 45
 infill_pattern = lines
 infill_sparse_density = 100
+material_bed_temperature = 45
 

resources/quality/ultimaker_method/um_method_1a_um-pla-175_0.2mm.inst.cfg

@@ -4,11 +4,11 @@ name = Fast
 version = 4
 
 [metadata]
+setting_version = 23
+variant = 1A
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = 1A
 weight = -2
 
 [values]

resources/quality/ultimaker_method/um_method_1c_um-nylon12-cf-175_0.2mm.inst.cfg

@@ -4,11 +4,11 @@ name = Fast
 version = 4
 
 [metadata]
+setting_version = 23
+variant = 1C
 material = ultimaker_nylon12-cf_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = 1C
 weight = -2
 
 [values]
@@ -17,8 +17,10 @@ material_final_print_temperature = =default_material_print_temperature-5
 material_initial_print_temperature = =default_material_print_temperature-5
 raft_airgap = 0.3
 raft_base_line_spacing = 3
-raft_base_line_width = 1.2
+raft_base_line_width = 1
 raft_base_speed = 10
+raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.5
+raft_base_wall_count = =3 if extruder_nr == support_extruder_nr else 1
 retract_at_layer_change = True
 retraction_amount = 0.5
 retraction_min_travel = 3.2

resources/quality/ultimaker_method/um_method_1c_um-pla-175_0.2mm.inst.cfg

@@ -4,11 +4,11 @@ name = Fast
 version = 4
 
 [metadata]
+setting_version = 23
+variant = 1C
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = 1C
 weight = -2
 
 [values]

resources/quality/ultimaker_method/um_method_2a_um-pva-175_0.2mm.inst.cfg

@@ -4,11 +4,11 @@ name = Fast
 version = 4
 
 [metadata]
+setting_version = 23
+variant = 2A
 material = ultimaker_pva_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = 2A
 weight = -2
 
 [values]

resources/quality/ultimaker_method/um_method_global_Draft_Quality.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-definition = ultimaker_method
-name = Fast
 version = 4
+name = Fast
+definition = ultimaker_method
 
 [metadata]
-global_quality = True
-quality_type = draft
 setting_version = 23
 type = quality
+quality_type = draft
 weight = -2
+global_quality = True
 
 [values]
 layer_height = 0.203

resources/quality/ultimaker_method/um_method_global_Normal_Quality.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-definition = ultimaker_method
-name = Fine
 version = 4
+name = Fine
+definition = ultimaker_method
 
 [metadata]
-global_quality = True
-quality_type = normal
 setting_version = 23
 type = quality
+quality_type = normal
 weight = 0
+global_quality = True
 
 [values]
 layer_height = 0.1

resources/quality/ultimaker_method/um_method_labs_um-nylon12-cf-175_0.2mm.inst.cfg

@@ -4,11 +4,11 @@ name = Fast
 version = 4
 
 [metadata]
+setting_version = 23
+variant = LABS
 material = ultimaker_nylon12-cf_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = LABS
 weight = -2
 
 [values]
@@ -17,8 +17,10 @@ material_final_print_temperature = =default_material_print_temperature-5
 material_initial_print_temperature = =default_material_print_temperature-5
 raft_airgap = 0.3
 raft_base_line_spacing = 3
-raft_base_line_width = 1.2
+raft_base_line_width = 1
 raft_base_speed = 10
+raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.5
+raft_base_wall_count = =3 if extruder_nr == support_extruder_nr else 1
 retract_at_layer_change = True
 retraction_amount = 0.5
 retraction_min_travel = 3.2

resources/quality/ultimaker_method/um_method_labs_um-pla-175_0.2mm.inst.cfg

@@ -4,11 +4,11 @@ name = Fast
 version = 4
 
 [metadata]
+setting_version = 23
+variant = LABS
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = LABS
 weight = -2
 
 [values]

resources/quality/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm.inst.cfg

@@ -4,11 +4,11 @@ name = Fast
 version = 4
 
 [metadata]
+setting_version = 23
+variant = 1A
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = 1A
 weight = -2
 
 [values]

resources/quality/ultimaker_methodx/um_methodx_1c_um-nylon12-cf-175_0.2mm.inst.cfg

@@ -1,15 +1,14 @@
 [general]
 definition = ultimaker_methodx
-name = Fast - Experimental
+name = Fast
 version = 4
 
 [metadata]
-is_experimental = True
+setting_version = 23
+variant = 1C
 material = ultimaker_nylon12-cf_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = 1C
 weight = -2
 
 [values]
@@ -18,8 +17,10 @@ material_final_print_temperature = =default_material_print_temperature-5
 material_initial_print_temperature = =default_material_print_temperature-5
 raft_airgap = 0.3
 raft_base_line_spacing = 3
-raft_base_line_width = 1.2
+raft_base_line_width = 1
 raft_base_speed = 10
+raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.5
+raft_base_wall_count = =3 if extruder_nr == support_extruder_nr else 1
 retract_at_layer_change = True
 retraction_amount = 0.5
 retraction_min_travel = 3.2

resources/quality/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm.inst.cfg

@@ -4,11 +4,11 @@ name = Fast
 version = 4
 
 [metadata]
+setting_version = 23
+variant = 1C
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = 1C
 weight = -2
 
 [values]

resources/quality/ultimaker_methodx/um_methodx_2a_um-pva-175_0.2mm.inst.cfg

@@ -4,11 +4,11 @@ name = Fast
 version = 4
 
 [metadata]
+setting_version = 23
+variant = 2A
 material = ultimaker_pva_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = 2A
 weight = -2
 
 [values]

resources/quality/ultimaker_methodx/um_methodx_global_Draft_Quality.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-definition = ultimaker_methodx
-name = Fast
 version = 4
+name = Fast
+definition = ultimaker_methodx
 
 [metadata]
-global_quality = True
-quality_type = draft
 setting_version = 23
 type = quality
+quality_type = draft
 weight = -2
+global_quality = True
 
 [values]
 layer_height = 0.203

resources/quality/ultimaker_methodx/um_methodx_labs_um-nylon12-cf-175_0.2mm.inst.cfg

@@ -1,15 +1,14 @@
 [general]
 definition = ultimaker_methodx
-name = Fast - Experimental
+name = Fast
 version = 4
 
 [metadata]
-is_experimental = True
+setting_version = 23
+variant = LABS
 material = ultimaker_nylon12-cf_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = LABS
 weight = -2
 
 [values]
@@ -18,8 +17,10 @@ material_final_print_temperature = =default_material_print_temperature-5
 material_initial_print_temperature = =default_material_print_temperature-5
 raft_airgap = 0.3
 raft_base_line_spacing = 3
-raft_base_line_width = 1.2
+raft_base_line_width = 1
 raft_base_speed = 10
+raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.5
+raft_base_wall_count = =3 if extruder_nr == support_extruder_nr else 1
 retract_at_layer_change = True
 retraction_amount = 0.5
 retraction_min_travel = 3.2

resources/quality/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm.inst.cfg

@@ -4,11 +4,11 @@ name = Fast
 version = 4
 
 [metadata]
+setting_version = 23
+variant = LABS
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = LABS
 weight = -2
 
 [values]

resources/quality/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm.inst.cfg

@@ -4,11 +4,11 @@ name = Fast
 version = 4
 
 [metadata]
+setting_version = 23
+variant = 1A
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = 1A
 weight = -2
 
 [values]

resources/quality/ultimaker_methodxl/um_methodxl_1c_um-nylon12-cf-175_0.2mm.inst.cfg

@@ -1,15 +1,14 @@
 [general]
 definition = ultimaker_methodxl
-name = Fast - Experimental
+name = Fast
 version = 4
 
 [metadata]
-is_experimental = True
+setting_version = 23
+variant = 1C
 material = ultimaker_nylon12-cf_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = 1C
 weight = -2
 
 [values]
@@ -18,8 +17,10 @@ material_final_print_temperature = =default_material_print_temperature-5
 material_initial_print_temperature = =default_material_print_temperature-5
 raft_airgap = 0.3
 raft_base_line_spacing = 3
-raft_base_line_width = 1.2
+raft_base_line_width = 1
 raft_base_speed = 10
+raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.5
+raft_base_wall_count = =3 if extruder_nr == support_extruder_nr else 1
 retract_at_layer_change = True
 retraction_amount = 0.5
 retraction_min_travel = 3.2

resources/quality/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm.inst.cfg

@@ -4,11 +4,11 @@ name = Fast
 version = 4
 
 [metadata]
+setting_version = 23
+variant = 1C
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = 1C
 weight = -2
 
 [values]

resources/quality/ultimaker_methodxl/um_methodxl_2a_um-pva-175_0.2mm.inst.cfg

@@ -4,11 +4,11 @@ name = Fast
 version = 4
 
 [metadata]
+setting_version = 23
+variant = 2A
 material = ultimaker_pva_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = 2A
 weight = -2
 
 [values]

resources/quality/ultimaker_methodxl/um_methodxl_global_Draft_Quality.inst.cfg

@@ -1,14 +1,14 @@
 [general]
-definition = ultimaker_methodxl
-name = Fast
 version = 4
+name = Fast
+definition = ultimaker_methodxl
 
 [metadata]
-global_quality = True
-quality_type = draft
 setting_version = 23
 type = quality
+quality_type = draft
 weight = -2
+global_quality = True
 
 [values]
 layer_height = 0.2

resources/quality/ultimaker_methodxl/um_methodxl_labs_um-nylon12-cf-175_0.2mm.inst.cfg

@@ -1,15 +1,14 @@
 [general]
 definition = ultimaker_methodxl
-name = Fast - Experimental
+name = Fast
 version = 4
 
 [metadata]
-is_experimental = True
+setting_version = 23
+variant = LABS
 material = ultimaker_nylon12-cf_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = LABS
 weight = -2
 
 [values]
@@ -18,8 +17,10 @@ material_final_print_temperature = =default_material_print_temperature-5
 material_initial_print_temperature = =default_material_print_temperature-5
 raft_airgap = 0.3
 raft_base_line_spacing = 3
-raft_base_line_width = 1.2
+raft_base_line_width = 1
 raft_base_speed = 10
+raft_base_thickness = =0.6 if extruder_nr == support_extruder_nr else 0.5
+raft_base_wall_count = =3 if extruder_nr == support_extruder_nr else 1
 retract_at_layer_change = True
 retraction_amount = 0.5
 retraction_min_travel = 3.2

resources/quality/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm.inst.cfg

@@ -4,11 +4,11 @@ name = Fast
 version = 4
 
 [metadata]
+setting_version = 23
+variant = LABS
 material = ultimaker_pla_175
 quality_type = draft
-setting_version = 23
 type = quality
-variant = LABS
 weight = -2
 
 [values]

resources/variants/ultimaker_method_1A.inst.cfg

@@ -1,13 +1,13 @@
 [general]
-definition = ultimaker_method
 name = 1A
 version = 4
+definition = ultimaker_method
 
 [metadata]
-hardware_type = nozzle
-reference_extruder_id = mk14
 setting_version = 23
 type = variant
+reference_extruder_id = mk14
+hardware_type = nozzle
 
 [values]
 machine_nozzle_id = 1A

resources/variants/ultimaker_method_1C.inst.cfg

@@ -1,13 +1,13 @@
 [general]
-definition = ultimaker_method
 name = 1C
 version = 4
+definition = ultimaker_method
 
 [metadata]
-hardware_type = nozzle
-reference_extruder_id = mk14_c
 setting_version = 23
 type = variant
+reference_extruder_id = mk14_c
+hardware_type = nozzle
 
 [values]
 machine_nozzle_id = 1C

resources/variants/ultimaker_method_2A.inst.cfg

@@ -1,13 +1,13 @@
 [general]
-definition = ultimaker_method
 name = 2A
 version = 4
+definition = ultimaker_method
 
 [metadata]
-hardware_type = nozzle
-reference_extruder_id = mk14_s
 setting_version = 23
 type = variant
+reference_extruder_id = mk14_s
+hardware_type = nozzle
 
 [values]
 machine_nozzle_id = 2A

resources/variants/ultimaker_method_LABS.inst.cfg

@@ -1,12 +1,12 @@
 [general]
-definition = ultimaker_method
 name = LABS
 version = 4
+definition = ultimaker_method
 
 [metadata]
-hardware_type = nozzle
 setting_version = 23
 type = variant
+hardware_type = nozzle
 
 [values]
 machine_nozzle_id = LABS