From f6110623ce7cd2f07c7fc5d6f14d598dcbd16ac5 Mon Sep 17 00:00:00 2001 From: Chris Petersen Date: Wed, 18 Jan 2017 01:15:59 -0800 Subject: [PATCH] Fix typos in kossel_pro gcode variable usage Replace double-braces with single-braces so that `material_bed_temperature` and `material_print_temperature` are interpolated properly. --- resources/definitions/kossel_pro.def.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/resources/definitions/kossel_pro.def.json b/resources/definitions/kossel_pro.def.json index a0774b3a06..e8403a1727 100644 --- a/resources/definitions/kossel_pro.def.json +++ b/resources/definitions/kossel_pro.def.json @@ -45,7 +45,7 @@ "default_value": "RepRap (Marlin/Sprinter)" }, "machine_start_gcode": { - "default_value": "; info: M303 E0 S200 C8 ; Pid auto-tune \n\nM140 S{{material_bed_temperature}}; Start heating up the base\nG28 ; Home to top 3 endstops\n; Autolevel and adjust first layer\n; Adjust this value to fit your own printer! (positive is thicker)\n; This default value is intentionally very high to accommodate the\n; variety of print heads used with this printer. Many of you will\n; need tiny values like Z0 or Z0.1. Use feeler gauges to dial this\n; in as accurately as possible.\nG29 Z10\n\n; Squirt and wipe ;\nM109 S220 ; Wait for the temp to hit 220\nG00 X125 Y-60 Z0.1 ;\nG92 E0 ;\nG01 E25 F100 ; Extrude a little bit to replace oozage from auto levelling\nG01 X90 Y-50 F6000 ;\nG01 Z5 ;\n\n; Set the extruder to the requested print temperature\nM104 S{{material_print_temperature}}\n" + "default_value": "; info: M303 E0 S200 C8 ; Pid auto-tune \n\nM140 S{material_bed_temperature}; Start heating up the base\nG28 ; Home to top 3 endstops\n; Autolevel and adjust first layer\n; Adjust this value to fit your own printer! (positive is thicker)\n; This default value is intentionally very high to accommodate the\n; variety of print heads used with this printer. Many of you will\n; need tiny values like Z0 or Z0.1. Use feeler gauges to dial this\n; in as accurately as possible.\nG29 Z10\n\n; Squirt and wipe ;\nM109 S220 ; Wait for the temp to hit 220\nG00 X125 Y-60 Z0.1 ;\nG92 E0 ;\nG01 E25 F100 ; Extrude a little bit to replace oozage from auto levelling\nG01 X90 Y-50 F6000 ;\nG01 Z5 ;\n\n; Set the extruder to the requested print temperature\nM104 S{material_print_temperature}\n" }, "machine_end_gcode": { "default_value": "M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nG28 ; home all axes\nM84 ; disable motors\n" @@ -54,4 +54,4 @@ "default_value": "elliptic" } } -} \ No newline at end of file +}