Merge pull request #10509 from Ultimaker/PP-1-Improved_print_profiles

Various print profile improvements for the UM3, S3 and S5

resources/definitions/ultimaker2.def.json

@@ -86,6 +86,18 @@
         },
         "machine_acceleration": {
             "default_value": 3000
+        },
+        "infill_before_walls": {
+            "value": false
+        },
+        "retraction_combing": {
+            "value": "no_outer_surfaces"
+        },
+        "skin_monotonic" : {
+            "value": true
+        },
+        "top_bottom_pattern" : {
+            "value":  "zigzag"
         }
     }
 }

resources/definitions/ultimaker3.def.json

@@ -96,20 +96,28 @@
         "cool_fan_speed": { "value": "50" },
         "cool_fan_speed_max": { "value": "100" },
         "cool_min_speed": { "value": "5" },
+        "infill_before_walls": { "value": false },
         "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" },
         "infill_overlap": { "value": "0" },
         "infill_pattern": { "value": "'triangles'" },
         "infill_wipe_dist": { "value": "0" },
         "initial_layer_line_width_factor": { "value": "120" },
         "jerk_enabled": { "value": "True" },
-        "jerk_layer_0": { "value": "jerk_topbottom" },
+        "jerk_print": { "value": "20", "minimum_value_warning": 20 },
-        "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" },
+        "jerk_infill": {"minimum_value_warning": 20 },
-        "jerk_print": { "value": "25" },
+        "jerk_wall": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" },
+        "jerk_wall_0": { "value": "jerk_wall", "minimum_value_warning": 20 },
-        "jerk_support_interface": { "value": "jerk_topbottom" },
+        "jerk_roofing": {"minimum_value_warning": 20 },
-        "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" },
+        "jerk_topbottom": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" },
+        "jerk_support": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" },
+        "jerk_support_infill": {"minimum_value_warning": 20 },
+        "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
+        "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
+        "jerk_travel": {"minimum_value_warning": 20 },
+        "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
+        "jerk_print_layer_0": {"minimum_value_warning": 20 },
+        "jerk_travel_layer_0": {"minimum_value_warning": 20 },
+        "jerk_skirt_brim": {"minimum_value_warning": 20 },
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
@@ -132,6 +140,7 @@
         "raft_margin": { "value": "10" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },
+        "retraction_combing": {"value": "no_outer_surfaces"},
         "retraction_count_max": { "value": "10" },
         "retraction_extrusion_window": { "value": "1" },
         "retraction_hop": { "value": "2" },
@@ -140,6 +149,7 @@
         "retraction_min_travel": { "value": "5" },
         "retraction_prime_speed": { "value": "15" },
         "skin_overlap": { "value": "10" },
+        "skin_monotonic" : { "value": true },
         "speed_layer_0": { "value": "20" },
         "speed_prime_tower": { "value": "speed_topbottom" },
         "speed_print": { "value": "35" },
@@ -158,6 +168,7 @@
         "support_z_distance": { "value": "0" },
         "switch_extruder_prime_speed": { "value": "15" },
         "switch_extruder_retraction_amount": { "value": "8" },
+        "top_bottom_pattern" : {"value":  "'zigzag'"},
         "top_bottom_thickness": { "value": "1" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
         "wall_0_inset": { "value": "0" },

resources/definitions/ultimaker_s3.def.json

@@ -89,19 +89,27 @@
         "cool_fan_speed": { "value": "50" },
         "cool_fan_speed_max": { "value": "100" },
         "cool_min_speed": { "value": "5" },
+        "infill_before_walls": { "value": false },
         "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" },
         "infill_overlap": { "value": "0" },
         "infill_pattern": { "value": "'triangles'" },
         "infill_wipe_dist": { "value": "0" },
         "jerk_enabled": { "value": "True" },
-        "jerk_layer_0": { "value": "jerk_topbottom" },
+        "jerk_print": { "value": "20", "minimum_value_warning": 20 },
-        "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" },
+        "jerk_infill": {"minimum_value_warning": 20 },
-        "jerk_print": { "value": "25" },
+        "jerk_wall": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" },
+        "jerk_wall_0": { "value": "jerk_wall", "minimum_value_warning": 20 },
-        "jerk_support_interface": { "value": "jerk_topbottom" },
+        "jerk_roofing": {"minimum_value_warning": 20 },
-        "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" },
+        "jerk_topbottom": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" },
+        "jerk_support": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" },
+        "jerk_support_infill": {"minimum_value_warning": 20 },
+        "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
+        "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
+        "jerk_travel": {"minimum_value_warning": 20 },
+        "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
+        "jerk_print_layer_0": {"minimum_value_warning": 20 },
+        "jerk_travel_layer_0": {"minimum_value_warning": 20 },
+        "jerk_skirt_brim": {"minimum_value_warning": 20 },
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
@@ -110,6 +118,7 @@
         "default_material_print_temperature": { "value": "200" },
         "material_standby_temperature": { "value": "100" },
         "multiple_mesh_overlap": { "value": "0" },
+        "optimize_wall_printing_order": { "value": "True" },
         "prime_tower_enable": { "value": "True" },
         "raft_airgap": { "value": "0" },
         "raft_base_speed": { "value": "20" },
@@ -123,6 +132,7 @@
         "raft_speed": { "value": "25" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },
+        "retraction_combing": { "value": "'no_outer_surfaces'"},
         "retraction_count_max": { "value": "10" },
         "retraction_extrusion_window": { "value": "1" },
         "retraction_hop": { "value": "2" },
@@ -130,6 +140,7 @@
         "retraction_hop_only_when_collides": { "value": "True" },
         "retraction_min_travel": { "value": "5" },
         "retraction_prime_speed": { "value": "15" },
+        "skin_monotonic" : { "value": true },
         "skin_overlap": { "value": "10" },
         "speed_equalize_flow_enabled": { "value": "True" },
         "speed_layer_0": { "value": "20" },
@@ -149,6 +160,7 @@
         "support_z_distance": { "value": "0" },
         "switch_extruder_prime_speed": { "value": "15" },
         "switch_extruder_retraction_amount": { "value": "8" },
+        "top_bottom_pattern" : {"value":  "'zigzag'"},
         "top_bottom_thickness": { "value": "1" },
         "travel_avoid_supports": { "value": "True" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },

resources/definitions/ultimaker_s5.def.json

@@ -91,19 +91,27 @@
         "cool_fan_speed": { "value": "50" },
         "cool_fan_speed_max": { "value": "100" },
         "cool_min_speed": { "value": "5" },
+        "infill_before_walls": { "value": false },
         "infill_line_width": { "value": "round(line_width * 0.5 / 0.35, 2)" },
         "infill_overlap": { "value": "0" },
         "infill_pattern": { "value": "'triangles'" },
         "infill_wipe_dist": { "value": "0" },
         "jerk_enabled": { "value": "True" },
-        "jerk_layer_0": { "value": "jerk_topbottom" },
+        "jerk_print": { "value": "20", "minimum_value_warning": 20 },
-        "jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" },
+        "jerk_infill": {"minimum_value_warning": 20 },
-        "jerk_print": { "value": "25" },
+        "jerk_wall": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" },
+        "jerk_wall_0": { "value": "jerk_wall", "minimum_value_warning": 20 },
-        "jerk_support_interface": { "value": "jerk_topbottom" },
+        "jerk_roofing": {"minimum_value_warning": 20 },
-        "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" },
+        "jerk_topbottom": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" },
+        "jerk_support": { "value": "jerk_print", "minimum_value_warning": 20 },
-        "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" },
+        "jerk_support_infill": {"minimum_value_warning": 20 },
+        "jerk_support_interface": { "value": "math.ceil(jerk_print * 5 / 20)"},
+        "jerk_prime_tower": { "value": "jerk_print", "minimum_value_warning": 20 },
+        "jerk_travel": {"minimum_value_warning": 20 },
+        "jerk_layer_0": { "value": "jerk_topbottom", "minimum_value_warning": 20},
+        "jerk_print_layer_0": {"minimum_value_warning": 20 },
+        "jerk_travel_layer_0": {"minimum_value_warning": 20 },
+        "jerk_skirt_brim": {"minimum_value_warning": 20 },
         "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
         "layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
@@ -125,6 +133,7 @@
         "raft_speed": { "value": "25" },
         "raft_surface_layers": { "value": "1" },
         "retraction_amount": { "value": "6.5" },
+        "retraction_combing": { "value": "'no_outer_surfaces'"},
         "retraction_count_max": { "value": "10" },
         "retraction_extrusion_window": { "value": "1" },
         "retraction_hop": { "value": "2" },
@@ -132,6 +141,7 @@
         "retraction_hop_only_when_collides": { "value": "True" },
         "retraction_min_travel": { "value": "5" },
         "retraction_prime_speed": { "value": "15" },
+        "skin_monotonic" : { "value": true },
         "skin_overlap": { "value": "10" },
         "speed_equalize_flow_enabled": { "value": "True" },
         "speed_layer_0": { "value": "20" },
@@ -151,6 +161,7 @@
         "support_z_distance": { "value": "0" },
         "switch_extruder_prime_speed": { "value": "15" },
         "switch_extruder_retraction_amount": { "value": "8" },
+        "top_bottom_pattern" : {"value":  "'zigzag'"},
         "top_bottom_thickness": { "value": "1" },
         "travel_avoid_supports": { "value": "True" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },

resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg

@@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2

resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg

@@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2

resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg

@@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 layer_height = 0.3
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature + 2

resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg

@@ -20,9 +20,6 @@ infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
 infill_sparse_density = 10
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature

resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg

@@ -20,9 +20,6 @@ infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
 infill_sparse_density = 10
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 layer_height = 0.4
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5

resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg

@@ -20,9 +20,6 @@ infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
 infill_sparse_density = 10
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 layer_height = 0.3
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5

resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg

@@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2

resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg

@@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2

resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg

@@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100

resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg

@@ -18,9 +18,6 @@ top_skin_expand_distance = =line_width * 2
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature

resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg

@@ -19,9 +19,6 @@ infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
 infill_sparse_density = 10
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature

resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg

@@ -19,9 +19,6 @@ infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
 infill_sparse_density = 10
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature

resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg

@@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2

resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg

@@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2

resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg

@@ -19,9 +19,6 @@ top_skin_expand_distance = =line_width * 2
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100

resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg

@@ -18,9 +18,6 @@ top_skin_expand_distance = =line_width * 2
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature

resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg

@@ -19,9 +19,6 @@ infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
 infill_sparse_density = 10
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature

resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg

@@ -19,9 +19,6 @@ infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
 infill_sparse_density = 10
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature

resources/variants/ultimaker3_aa0.8.inst.cfg

@@ -23,9 +23,6 @@ infill_pattern = triangles
 infill_wipe_dist = 0
 jerk_enabled = True
 jerk_print = 25
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
 layer_height = 0.2
 line_width = =machine_nozzle_size
 machine_min_cool_heat_time_window = 15

resources/variants/ultimaker3_bb0.8.inst.cfg

@@ -25,7 +25,6 @@ infill_overlap = 0
 infill_pattern = triangles
 infill_wipe_dist = 0
 jerk_enabled = True
-jerk_prime_tower = =math.ceil(jerk_print * 2 / 25)
 jerk_print = 25
 jerk_support = =math.ceil(jerk_print * 15 / 25)
 jerk_support_interface = =math.ceil(jerk_support * 10 / 15)

resources/variants/ultimaker3_bb04.inst.cfg

@@ -15,7 +15,6 @@ acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
 acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
 cool_fan_speed_max = =cool_fan_speed
 gradual_support_infill_steps = 2
-jerk_prime_tower = =math.ceil(jerk_print * 2 / 25)
 jerk_support = =math.ceil(jerk_print * 15 / 25)
 jerk_support_interface = =math.ceil(jerk_support * 10 / 15)
 jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10)

resources/variants/ultimaker3_extended_aa0.8.inst.cfg

@@ -23,9 +23,6 @@ infill_pattern = triangles
 infill_wipe_dist = 0
 jerk_enabled = True
 jerk_print = 25
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
 layer_height = 0.2
 line_width = =machine_nozzle_size
 machine_min_cool_heat_time_window = 15

resources/variants/ultimaker3_extended_bb0.8.inst.cfg

@@ -25,7 +25,6 @@ infill_overlap = 0
 infill_pattern = triangles
 infill_wipe_dist = 0
 jerk_enabled = True
-jerk_prime_tower = =math.ceil(jerk_print * 2 / 25)
 jerk_print = 25
 jerk_support = =math.ceil(jerk_print * 15 / 25)
 jerk_support_interface = =math.ceil(jerk_support * 10 / 15)

resources/variants/ultimaker3_extended_bb04.inst.cfg

@@ -15,7 +15,6 @@ acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
 acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
 cool_fan_speed_max = =cool_fan_speed
 gradual_support_infill_steps = 2
-jerk_prime_tower = =math.ceil(jerk_print * 2 / 25)
 jerk_support = =math.ceil(jerk_print * 15 / 25)
 jerk_support_interface = =math.ceil(jerk_support * 10 / 15)
 jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10)

resources/variants/ultimaker_s3_aa0.8.inst.cfg

@@ -23,9 +23,6 @@ infill_pattern = triangles
 infill_wipe_dist = 0
 jerk_enabled = True
 jerk_print = 25
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
 layer_height = 0.2
 line_width = =machine_nozzle_size
 machine_min_cool_heat_time_window = 15

resources/variants/ultimaker_s3_bb0.8.inst.cfg

@@ -25,7 +25,6 @@ infill_overlap = 0
 infill_pattern = triangles
 infill_wipe_dist = 0
 jerk_enabled = True
-jerk_prime_tower = =math.ceil(jerk_print * 2 / 25)
 jerk_print = 25
 jerk_support = =math.ceil(jerk_print * 15 / 25)
 jerk_support_interface = =math.ceil(jerk_support * 10 / 15)

resources/variants/ultimaker_s3_bb04.inst.cfg

@@ -15,7 +15,6 @@ acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 /
 acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 4000)
 cool_fan_speed_max = =cool_fan_speed
 gradual_support_infill_steps = 2
-jerk_prime_tower = =math.ceil(jerk_print * 2 / 25)
 jerk_support = =math.ceil(jerk_print * 15 / 25)
 jerk_support_interface = =math.ceil(jerk_support * 10 / 15)
 jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10)

resources/variants/ultimaker_s5_aa0.8.inst.cfg

@@ -23,9 +23,6 @@ infill_pattern = triangles
 infill_wipe_dist = 0
 jerk_enabled = True
 jerk_print = 25
-jerk_topbottom = =math.ceil(jerk_print * 25 / 25)
-jerk_wall = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25)
 layer_height = 0.2
 line_width = =machine_nozzle_size
 machine_min_cool_heat_time_window = 15

resources/variants/ultimaker_s5_bb0.8.inst.cfg

@@ -25,7 +25,6 @@ infill_overlap = 0
 infill_pattern = triangles
 infill_wipe_dist = 0
 jerk_enabled = True
-jerk_prime_tower = =math.ceil(jerk_print * 2 / 25)
 jerk_print = 25
 jerk_support = =math.ceil(jerk_print * 15 / 25)
 jerk_support_interface = =math.ceil(jerk_support * 10 / 15)

resources/variants/ultimaker_s5_bb04.inst.cfg

@@ -15,7 +15,6 @@ acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 /
 acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 4000)
 cool_fan_speed_max = =cool_fan_speed
 gradual_support_infill_steps = 2
-jerk_prime_tower = =math.ceil(jerk_print * 2 / 25)
 jerk_support = =math.ceil(jerk_print * 15 / 25)
 jerk_support_interface = =math.ceil(jerk_support * 10 / 15)
 jerk_support_bottom = =math.ceil(jerk_support_interface * 1 / 10)