Update cartesio_0.4.inst.cfg

resources/variants/cartesio_0.4.inst.cfg

@@ -10,6 +10,44 @@ type = variant
 [values]
 machine_nozzle_size = 0.4
 machine_nozzle_tip_outer_diameter = 1.05
-speed_wall = =round(speed_print / 2, 1)
+
-speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 * 3)
+wall_0_inset = -0.05
-speed_topbottom = =round(speed_print / 5 * 3, 1)
+fill_perimeter_gaps = nowhere
+travel_compensate_overlapping_walls_enabled = 
+
+infill_sparse_density = 25
+infill_overlap = -50
+skin_overlap = -40
+
+material_print_temperature_layer_0 = =round(material_print_temperature)
+material_initial_print_temperature = =round(material_print_temperature)
+material_diameter = 1.75
+retraction_amount = 1
+retraction_speed = 40
+retraction_prime_speed = =round(retraction_speed / 4)
+retraction_min_travel = =round(line_width * 10)
+switch_extruder_retraction_amount = 2
+switch_extruder_retraction_speeds = 40
+switch_extruder_prime_speed = =round(switch_extruder_retraction_speeds / 4)
+
+speed_print = =50 if layer_height < 0.4 else 30
+speed_infill = =round(speed_print)
+speed_layer_0 = =round(speed_print / 5 * 4)
+speed_wall = =round(speed_print / 2)
+speed_wall_0 = =10 if speed_wall < 11 else (speed_print / 5 *3)
+speed_topbottom = =round(speed_print / 5 * 4)
+speed_slowdown_layers = 1
+speed_travel = =round(speed_print if magic_spiralize else 150)
+speed_travel_layer_0 = =round(speed_travel)
+
+retraction_combing = off
+retraction_hop_enabled = true
+
+adhesion_type = skirt
+skirt_gap = 0.5
+skirt_brim_minimal_length = 50
+
+coasting_enable = true
+coasting_volume = 0.1
+coasting_min_volume = 0.17
+coasting_speed = 90