diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..f516d4288d
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 16
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_petg
+variant = AA 0.4
+
+[values]
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+xy_offset = =-layer_height * 0.2
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..c3ccf8fa99
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 16
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_petg
+variant = AA 0.4
+
+[values]
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+xy_offset = =-layer_height * 0.2
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg
new file mode 100644
index 0000000000..5056739fb4
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg
@@ -0,0 +1,36 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 16
+type = intent
+intent_category = engineering
+quality_type = fast
+material = generic_petg
+variant = AA 0.4
+
+[values]
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg
new file mode 100644
index 0000000000..beb518e1ef
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg
@@ -0,0 +1,36 @@
+[general]
+version = 4
+name = Accurate
+definition = ultimaker_s5
+
+[metadata]
+setting_version = 16
+type = intent
+intent_category = engineering
+quality_type = normal
+material = generic_petg
+variant = AA 0.4
+
+[values]
+infill_line_width = =line_width
+jerk_print = 30
+jerk_infill = =jerk_print
+jerk_topbottom = =jerk_print
+jerk_wall = =jerk_print
+jerk_wall_0 = =jerk_wall
+jerk_wall_x = =jerk_wall
+jerk_layer_0 = 5
+line_width = =machine_nozzle_size
+speed_print = 30
+speed_infill = =speed_print
+speed_layer_0 = 20
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
+xy_offset = =-layer_height * 0.2
+xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
+