diff --git a/resources/definitions/skriware_2.def.json b/resources/definitions/skriware_2.def.json
index 2149a8e429..8873b8a5ef 100644
--- a/resources/definitions/skriware_2.def.json
+++ b/resources/definitions/skriware_2.def.json
@@ -162,7 +162,7 @@
       "default_value": 1.2000000000000002
     },
     "machine_start_gcode": {
-      "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 X0 Y0;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nM420 S1 Z0.9 ;enable bed levelling\nG1 Z10 F250 ;move the platform down 10mm\nM107 ;fan off\nM42 P11 S255 ;turn on front fan\nM140 S{material_bed_temperature}\nM104 T0 S{material_print_temperature}\nM104 T1 S{material_print_temperature}\nG1 F2500 Y260\nM190 S{material_bed_temperature}\nM109 T0 S{material_print_temperature}\nM109 T1 S{material_print_temperature}\nM60 ;enable E-FADE Algorithm\nM62 A ;filament sensor off\nG92 E0 ;zero the extruded length\nT1\nG92 E0;zero the extruded length\nG1 F300 Z0.3\nG1 F1200 X20\nG1 F1200 X180 E21 ;extrude 21 mm of feed stock\nG1 F1200 E15  ;retracting 6 mm\nG1 F2000 E21\nG1 F2000 E15\nG1 F300 Z1.5\nG92 E0 ;zero the extruded length again\nT0\nG92 E0 ;zero the extruded length\nG1 F1200 Y258\nG1 F300 Z0.3\nG1 F1200 X40 E21 ;extrude 21 mm of feed stock\nG1 F1200 E15 ;retracting 6 mm\nG1 F2000 E21\nG1 F2000 E15\nG1 Z1.5\nM61 A\nM63 A ;filament sensor on\nG92 E0 ;zero the extruded length again\nM58 ;end of Start G-Code and signal retract management"
+      "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG28 X0 Y0;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nM420 S1 Z0.9 ;enable bed levelling\nG1 Z10 F250 ;move the platform down 10mm\nM107 ;fan off\nM42 P11 S255 ;turn on front fan\nM140 S{material_bed_temperature}\nM104 T0 S{material_print_temperature, 0}\nM104 T1 S{material_print_temperature, 1}\nG1 F2500 Y260\nM190 S{material_bed_temperature}\nM109 T0 S{material_print_temperature, 0}\nM109 T1 S{material_print_temperature, 1}\nM60 ;enable E-FADE Algorithm\nM62 A ;filament sensor off\nG92 E0 ;zero the extruded length\nT1\nG92 E0;zero the extruded length\nG1 F300 Z0.3\nG1 F1200 X20\nG1 F1200 X180 E21 ;extrude 21 mm of feed stock\nG1 F1200 E15  ;retracting 6 mm\nG1 F2000 E21\nG1 F2000 E15\nG1 F300 Z1.5\nG92 E0 ;zero the extruded length again\nT0\nG92 E0 ;zero the extruded length\nG1 F1200 Y258\nG1 F300 Z0.3\nG1 F1200 X40 E21 ;extrude 21 mm of feed stock\nG1 F1200 E15 ;retracting 6 mm\nG1 F2000 E21\nG1 F2000 E15\nG1 Z1.5\nM61 A\nM63 A ;filament sensor on\nG92 E0 ;zero the extruded length again\nM58 ;end of Start G-Code and signal retract management"
     },
     "travel_retract_before_outer_wall": {
       "default_value": true
@@ -630,4 +630,4 @@
       "default_value": false
     }
   }
-}
\ No newline at end of file
+}