diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg index 0ad9d1c637..82bdcea44b 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -10,8 +10,7 @@ material = generic_nylon_ultimaker3_AA_0.8 weight = -2 [values] -brim_line_count = 7 -brim_width = 8.0 +brim_width = 3 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 infill_before_walls = True @@ -24,7 +23,6 @@ prime_tower_size = 15 raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 @@ -33,4 +31,3 @@ support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 - diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg index 338aa6746b..99b433def1 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -10,8 +10,7 @@ material = generic_nylon_ultimaker3_AA_0.8 weight = -4 [values] -brim_line_count = 7 -brim_width = 8.0 +brim_width = 3 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 infill_before_walls = True @@ -25,7 +24,6 @@ prime_tower_size = 15 raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 @@ -34,4 +32,3 @@ support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 - diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg index b67e93e138..6f41e231c5 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -10,8 +10,7 @@ material = generic_nylon_ultimaker3_AA_0.8 weight = -3 [values] -brim_line_count = 7 -brim_width = 8.0 +brim_width = 3 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 infill_before_walls = True @@ -25,7 +24,6 @@ prime_tower_size = 15 raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) -raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 @@ -34,4 +32,3 @@ support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 - diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg index 1d059f6687..b9222d6350 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg @@ -11,7 +11,7 @@ weight = -2 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height -cool_fan_speed_max = =cool_fan_speed +cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height gradual_infill_steps = 4 @@ -28,9 +28,9 @@ material_standby_temperature = 100 prime_tower_size = 15 support_angle = 70 support_line_width = =line_width * 0.75 +support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 wall_line_width = =round(line_width * 0.75 / 0.75, 2) wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x - diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index a7045326ca..852ff52f6d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -11,7 +11,7 @@ weight = -4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height -cool_fan_speed_max = =cool_fan_speed +cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height gradual_infill_steps = 4 @@ -29,9 +29,9 @@ material_standby_temperature = 100 prime_tower_size = 15 support_angle = 70 support_line_width = =line_width * 0.75 +support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 wall_line_width = =round(line_width * 0.75 / 0.75, 2) wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x - diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg index cbf783febd..af18a87a20 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -11,7 +11,7 @@ weight = -3 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height -cool_fan_speed_max = =cool_fan_speed +cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height gradual_infill_steps = 4 @@ -29,9 +29,9 @@ material_standby_temperature = 100 prime_tower_size = 15 support_angle = 70 support_line_width = =line_width * 0.75 +support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 wall_line_width = =round(line_width * 0.75 / 0.75, 2) wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x - diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg index 2acaa9a98f..bac1826a63 100644 --- a/resources/variants/ultimaker3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_aa0.8.inst.cfg @@ -9,16 +9,8 @@ type = variant [values] acceleration_enabled = True -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) -acceleration_support_interface = =acceleration_topbottom -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) brim_width = 7 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed = 7 cool_fan_speed_max = 100 cool_min_speed = 5 @@ -29,16 +21,12 @@ infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) -jerk_support_interface = =jerk_topbottom jerk_topbottom = =math.ceil(jerk_print * 25 / 25) jerk_wall = =math.ceil(jerk_print * 25 / 25) jerk_wall_0 = =math.ceil(jerk_wall * 25 / 25) layer_height = 0.2 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) +line_width = =machine_nozzle_size machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -46,8 +34,11 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_standby_temperature = 100 multiple_mesh_overlap = 0 +prime_tower_enable = False prime_tower_size = 16 +prime_tower_wipe_enabled = True retract_at_layer_change = True +retraction_amount = 6.5 retraction_count_max = 25 retraction_extrusion_window = 1 retraction_hop = 2 @@ -56,22 +47,17 @@ retraction_hop_only_when_collides = True skin_overlap = 5 speed_equalize_flow_enabled = True speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom speed_print = 35 -speed_support = =speed_wall_0 -speed_support_interface = =speed_topbottom speed_topbottom = =math.ceil(speed_print * 25 / 35) -speed_wall = =math.ceil(speed_print * 30 / 35) speed_wall_0 = =math.ceil(speed_wall * 25 / 30) -speed_wall_x = =speed_wall support_angle = 60 support_bottom_distance = =support_z_distance / 2 +support_pattern = zigzag support_top_distance = =support_z_distance -support_xy_distance = =wall_line_width_0 * 2.5 -support_xy_distance_overhang = =wall_line_width_0 support_z_distance = =layer_height * 2 switch_extruder_retraction_amount = 16.5 top_bottom_thickness = 1.4 travel_avoid_distance = 3 wall_0_inset = 0 +wall_line_width_x = =wall_line_width wall_thickness = 2 diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index 8d8e2a16ed..79032d7ed3 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -9,16 +9,9 @@ type = variant [values] acceleration_enabled = True -acceleration_layer_0 = =acceleration_topbottom -acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000) acceleration_print = 4000 -acceleration_support = =math.ceil(acceleration_print * 2000 / 4000) acceleration_support_interface = =math.ceil(acceleration_topbottom * 100 / 500) -acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000) -acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000) -acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000) brim_width = 3 -cool_fan_full_at_height = =layer_height_0 + 4 * layer_height cool_fan_speed = 50 cool_min_speed = 5 infill_line_width = =round(line_width * 0.8 / 0.7, 2) @@ -26,23 +19,16 @@ infill_overlap = 0 infill_pattern = triangles infill_wipe_dist = 0 jerk_enabled = True -jerk_layer_0 = =jerk_topbottom -jerk_prime_tower = =math.ceil(jerk_print * 15 / 25) jerk_print = 25 -jerk_support = =math.ceil(jerk_print * 15 / 25) jerk_support_interface = =math.ceil(jerk_topbottom * 1 / 5) -jerk_topbottom = =math.ceil(jerk_print * 5 / 25) -jerk_wall = =math.ceil(jerk_print * 10 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10) layer_height = 0.2 -layer_height_0 = =round(machine_nozzle_size / 1.5, 2) -line_width = =machine_nozzle_size * 0.875 machine_min_cool_heat_time_window = 15 -machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 multiple_mesh_overlap = 0 +prime_tower_enable = False +prime_tower_wipe_enabled = True raft_acceleration = =acceleration_layer_0 raft_airgap = 0 raft_base_speed = 20 @@ -51,12 +37,12 @@ raft_interface_line_spacing = 0.5 raft_interface_line_width = 0.5 raft_interface_speed = 20 raft_interface_thickness = 0.2 -raft_jerk = =jerk_layer_0 raft_margin = 10 raft_speed = 25 raft_surface_layers = 1 retraction_amount = 4.5 retraction_count_max = 15 +retraction_extrusion_window = =retraction_amount retraction_hop = 2 retraction_hop_enabled = True retraction_hop_only_when_collides = True @@ -64,14 +50,9 @@ retraction_min_travel = 5 retraction_prime_speed = 15 skin_overlap = 5 speed_layer_0 = 20 -speed_prime_tower = =speed_topbottom speed_print = 35 -speed_support = =speed_wall_0 speed_support_interface = =math.ceil(speed_topbottom * 15 / 20) -speed_topbottom = =math.ceil(speed_print * 20 / 35) -speed_wall = =math.ceil(speed_print * 30 / 35) speed_wall_0 = =math.ceil(speed_wall * 25 / 30) -speed_wall_x = =speed_wall support_angle = 60 support_bottom_height = =layer_height * 2 support_bottom_stair_step_height = =layer_height @@ -91,4 +72,5 @@ switch_extruder_retraction_amount = 12 top_bottom_thickness = 1 travel_avoid_distance = 3 wall_0_inset = 0 +wall_line_width_x = =wall_line_width wall_thickness = 1