Alan Bjorklund
5ecfa59c94
Removed metallic PLA from Sketch exclude list
...
conan-package-resources / conan-package (push) Failing after 1s
unit-test / Run unit tests (push) Failing after 1s
printer-linter-format / Printer linter auto format (push) Failing after 1s
PP-552
2025-01-10 09:42:06 -05:00
Shirley Du
99d10e5227
Use some accel/jerk settings as Method Bead Mode values
...
Populate Method series .makerbot files' meta.json with accel override settings,
for the print globally and for 'bead modes' pertaining to specific features,
per extruder. Currently, extruder-specific bead mode settings will only be
added to the meta.json if the value is non-zero.
Also disallow setting per mesh/extruder/meshgroup for accel/jerk _enabled,
_print, _travel, _travel_enabled for method-based printers
2025-01-09 20:11:03 -05:00
Alan Bjorklund
87072cc0fe
Add metallic PLA quality files for Sketch printers
...
Previously we used the PLA quality files to print Metallic PLA.
There were drastic differences in surface quality (matte vs shiny).
The temperature increase to 230 addresses the surface differences.
We reduced the print speed to stay within the max flowrate of
12 mm^3/s. Additionally, the infill rotation was enabled for
Metallic PLA (Similar to Sketch PLA infill).
Some other speed adjustments were made (walls, roof, support
interface, support bottom). These were paths that got slowed
down too much when adjusting the global print speed. These
adjustments were made to make up some of the lost speed
without sacrificing print quality.
The previous support material flow value was set to 90%. We
increased it by 2% to limit under-extrusion, which is more
pronounced at the higher nozzle temperature.
PP-552
2025-01-09 17:51:33 -05:00
Erwan MATHIEU
3276fc2eb6
Add setting to filter out layers that have small overhanging faetures
...
conan-package-resources / conan-package (push) Failing after 0s
conan-package / conan-package (push) Failing after 0s
printer-linter-format / Printer linter auto format (push) Failing after 1s
unit-test / Run unit tests (push) Failing after 0s
CURA-12352
2025-01-09 13:54:58 +01:00
Erwan MATHIEU
b82bb8d6c9
Merge remote-tracking branch 'origin/CURA-11966_reduce-speed-on-overhang' into CURA-12352_different-minimum-layer-time-for-layers-that-contain-overhangs
2025-01-09 13:05:38 +01:00
Erwan MATHIEU
66402ff93c
Use single extruder when exporting for Replicator+
...
CURA-12313
2025-01-09 09:19:41 +01:00
Erwan MATHIEU
2fad92b3af
Merge remote-tracking branch 'origin/main' into CURA-11966_reduce-speed-on-overhang
unit-test / Run unit tests (push) Failing after 1s
conan-package-resources / conan-package (push) Failing after 0s
printer-linter-format / Printer linter auto format (push) Failing after 0s
conan-package / conan-package (push) Failing after 1s
2025-01-08 11:38:34 +01:00
Erwan MATHIEU
382b98e8b0
Fix wrong setting version on profiles
2024-12-20 15:19:24 +01:00
Erwan MATHIEU
f17872725a
Set proper method to define env variables
2024-12-20 14:42:53 +01:00
Erwan MATHIEU
07880cd590
Always display sub-packages main branch results
2024-12-20 12:33:41 +01:00
Erwan MATHIEU
345980026c
Display proper CuraEngine packaging action result
2024-12-20 12:29:02 +01:00
Erwan MATHIEU
2951a6b0f7
Fix nightly release notes syntax
2024-12-20 12:25:16 +01:00
Frederic98
0917f10105
Fix cloud connection for Sketch Sprint and Large
2024-12-19 11:43:29 +01:00
THeijmans
36534579ed
PP-547 Set Breakaway BVT to max 40C for Factor 4
2024-12-19 09:54:50 +01:00
Erwan MATHIEU
a74fb5fee0
Merge remote-tracking branch 'origin/main' into CURA-12250_refactor-the-post-processing-like-algorithms
2024-12-19 08:51:33 +01:00
Frederic Meeuwissen
2ad64e13db
Introduce Cheetah flavor
2024-12-18 18:21:00 +01:00
Erwan MATHIEU
5f81ba3e01
Remove unwanted files
2024-12-18 10:42:09 +01:00
Erwan MATHIEU
33a57ad9ce
Merge branch 'main' into CURA-12236_expose-preferred-travel-area-in-combing
2024-12-18 10:39:55 +01:00
wawanbreton
02ab5dd0be
Applied printer-linter format
2024-12-18 09:25:46 +00:00
Erwan MATHIEU
29cb2b121c
Polish setting name and description
...
CURA-12236
2024-12-18 10:24:29 +01:00
Erwan MATHIEU
5ccb96e07b
Adjust nightly builds tags
2024-12-18 09:10:56 +01:00
Erwan MATHIEU
d1932b5bdb
Fix file patterns syntax, maybe
2024-12-17 16:32:24 +01:00
Erwan MATHIEU
f95d073b1b
Use common linter workflow
2024-12-17 16:21:42 +01:00
HellAholic
e11d0db61a
Merge pull request #19515 from EmJay276/PR_GCodeReader_relative_extrusion
...
PlugIn GCodeReader - Process M82 and M83 command for Marlin flavoured GCode
2024-12-17 15:30:06 +01:00
Erwan MATHIEU
0efa90a2c3
Fix release-notes file path
2024-12-17 09:58:03 +01:00
wawanbreton
0785e6f055
Applied printer-linter format
2024-12-16 14:44:57 +00:00
Erwan MATHIEU
a8860017c7
Add setting for inner combing distance to walls
...
CURA-12236
2024-12-16 15:43:13 +01:00
Erwan MATHIEU
d83a841ee5
Merge branch 'CURA-11966_reduce-speed-on-overhang' into CURA-12352_different-minimum-layer-time-for-layers-that-contain-overhangs
2024-12-16 13:25:52 +01:00
Erwan MATHIEU
078fccc839
Add setting for minimum layer time with overhang
...
CURA-12352
2024-12-16 13:25:41 +01:00
Erwan MATHIEU
8fc93278dc
Revert "Applied printer-linter format"
...
This reverts commit a758ebb020887920856e2a4945daa048f7a3d721.
2024-12-16 13:18:48 +01:00
Erwan MATHIEU
e0689f9062
Remove scary warning for conan migration
2024-12-16 09:26:46 +01:00
Erwan MATHIEU
709367419b
Fix nightly release notes creation
2024-12-16 08:44:49 +01:00
Erwan MATHIEU
ddb5aee056
Use private data from internal conan-user
2024-12-13 20:43:19 +01:00
Erwan MATHIEU
86e799e565
Use fdm_materials_private when appropriate
2024-12-13 20:21:17 +01:00
Erwan MATHIEU
cd49eb3bff
Use proper user for private data
2024-12-13 17:27:05 +01:00
Erwan MATHIEU
fb720c3a07
Set version as not required
2024-12-13 15:40:15 +01:00
Erwan MATHIEU
97c89edee9
Set empty package version for installers by default
2024-12-13 15:34:19 +01:00
Erwan MATHIEU
50470758b2
Use proper private materials data
2024-12-13 13:33:31 +01:00
wawanbreton
a758ebb020
Applied printer-linter format
2024-12-13 10:40:54 +00:00
Erwan MATHIEU
9735bcf64b
Remove previous single overhang angle
2024-12-13 11:39:37 +01:00
Erwan MATHIEU
0b661203e7
Allow specific installers to have package overrides
2024-12-13 11:18:08 +01:00
Erwan MATHIEU
20b311f12e
Set proper default version value
2024-12-13 11:14:50 +01:00
Erwan MATHIEU
5d08f8eeef
Allow package overrides when building installers
2024-12-13 11:08:45 +01:00
Erwan MATHIEU
a7ac441d0f
Revert "Allow package overrides when building installers"
...
This reverts commit dd4b9e80c142991a2c9bbb07ea08b00ef1e893ab.
2024-12-13 10:22:40 +01:00
Erwan MATHIEU
dd4b9e80c1
Allow package overrides when building installers
2024-12-12 17:11:02 +01:00
Erwan MATHIEU
d5b4cad205
Improve setting description
...
CURA-11966
2024-12-12 15:59:48 +01:00
Erwan MATHIEU
f54eeede77
Fix the rename script call path
2024-12-12 14:42:32 +01:00
Remco Burema
cca70d83da
Install: Fix MacOs; Previous Windows fixes caused Mac build to fail.
...
part of CURA-11622
2024-12-11 16:17:18 +01:00
Remco Burema
bec87b88dd
(installer) Unwanted files are in there, try if it can start without.
...
part of CURA-11622
2024-12-11 10:20:49 +01:00
Remco Burema
66c1a08478
Added the additional hooks folder now present in the cura-workflows repo.
...
part of CURA-11622
2024-12-11 09:03:14 +01:00
