saumyaj3
c517311171
Applied printer-linter format
2024-04-19 14:56:51 +00:00
Saumya Jain
ee85383699
Add support z seam settings to expert.cfg and fdmprinter.def.json
...
This update includes two new settings in the expert visibility profile: 'support_z_seam_away_from_model' and 'support_z_seam_min_distance'. These allow users more control over the spatial relationship between the z seam of the support structure and the actual 3D model, ensuring a smoother post-printing process
CURA-11227
2024-04-19 16:55:24 +02:00
Jaime van Kessel
7a5c773e90
Made printprocess reporting settings not settable per mesh
2024-04-12 11:08:35 +02:00
c.lamboo
8e0127471d
Bumb setting version in fdmextruder and fdmprinter
...
CURA-11526
2024-03-15 14:34:51 +01:00
Erwan MATHIEU
52a303e977
Slightly reformulate brim_inside_margin description
2024-03-12 14:54:22 +01:00
Saumya Jain
38685793ab
Merge branch 'main' into CURA-11705-updating-strings-in-CURA
2024-03-08 14:46:04 +01:00
saumyaj3
4d77972600
Applied printer-linter format
2024-03-08 13:42:10 +00:00
Saumya Jain
143dd20392
Update fdmprinter.def.json
2024-03-08 14:41:17 +01:00
Saumya Jain
9e17a55c17
Dtring finishing for Prime tower type and print sequence
...
CURA-11705
2024-03-08 14:39:12 +01:00
Erwan MATHIEU
66aeb3b465
Apply suggested description simplification
...
CURA-9838
Co-authored-by: Casper Lamboo <c.lamboo@ultimaker.com>
2024-03-07 11:48:09 +01:00
Saumya Jain
ef1dfb6002
Merge branch 'main' into CURA-9838_brim_location
2024-03-05 10:51:58 +01:00
Erwan MATHIEU
af33084060
Fix prime tower positioning on elliptic build plates
2024-03-01 10:38:31 +01:00
Erwan MATHIEU
9a254d0755
Merge remote-tracking branch 'origin/main' into CURA-9838_brim_location
2024-02-29 11:23:21 +01:00
Erwan MATHIEU
57c57edb7d
Change brim margin setting desc because its use has been extended
...
CURA-9838
2024-02-29 11:21:16 +01:00
Erwan MATHIEU
426d5a4eb6
Replace setting brim_outside_only by brim_location
...
CURA-9838
2024-02-27 13:40:14 +01:00
Erwan MATHIEU
98becc9f25
Minor prime tower setting wording
...
CURA-11645
2024-02-27 13:02:46 +01:00
Erwan MATHIEU
85a82ea986
Fix prime_tower_enable setting use
...
CURA-11645
2024-02-27 12:57:38 +01:00
c.lamboo
caf710ff60
Change some left over prime tower mode -> enable
...
CURA-11645
2024-02-27 12:46:58 +01:00
Casper Lamboo
af494883cc
Update resources/definitions/fdmprinter.def.json
...
Co-authored-by: Erwan MATHIEU <erwan.mathieu@ultimaker.com>
2024-02-26 12:28:19 +01:00
Casper Lamboo
d4ba499d68
Update resources/definitions/fdmprinter.def.json
2024-02-22 17:13:01 +01:00
casperlamboo
0a09cee0c6
Applied printer-linter format
2024-02-22 15:22:31 +00:00
c.lamboo
bb439e5867
Introduce primetower_enable setting
...
CURA-11645
2024-02-22 16:21:32 +01:00
c.lamboo
c8f9f179d9
Revert "Revert "Enable prime tower mode according to materials types""
...
This reverts commit b99762776ee6ce3fe0e8bba8724eba9ca68ec4c7.
2024-02-22 12:50:53 +01:00
c.lamboo
d009839f9e
Revert "Restore prime tower options"
...
This reverts commit 60c3f6f2cbf4751960726eacfbc0d766ed4f16c7.
2024-02-22 12:50:50 +01:00
c.lamboo
60c3f6f2cb
Restore prime tower options
2024-02-22 11:00:56 +01:00
c.lamboo
b99762776e
Revert "Enable prime tower mode according to materials types"
...
This reverts commit 335a54c6d1c432e64784f95c69e77125bd0d57f1.
2024-02-22 10:47:04 +01:00
Erwan MATHIEU
e642d85fcd
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
2024-02-16 09:10:49 +01:00
Erwan MATHIEU
335a54c6d1
Enable prime tower mode according to materials types
2024-02-16 07:57:43 +01:00
Paul Kuiper
844f9b3ae8
Changed max. value warning level z support distance to prevent warnings for AA0.25 nozzle using default profiles.
...
PP-424
2024-02-14 14:44:54 +01:00
Saumya Jain
355f24e29f
Merge branch 'main' into Issue-4835-allow-to-set-print-sequence-manually
2024-02-09 09:52:06 +01:00
Paul Kuiper
965f9e5a1c
Increased maximum warning value for the small skin width from 3 line widths to 10 line widths.
...
PP-424
2024-02-05 11:15:34 +01:00
Erwan MATHIEU
6bafd13eaf
Set proper value for raft monotonic surface
...
CURA-11438
2024-01-24 12:46:25 +01:00
Erwan MATHIEU
6b4ec29b41
Add setting to activate monotonic raft top layer
...
CURA-11438
2024-01-18 15:51:26 +01:00
Erwan MATHIEU
8d0329f284
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
2024-01-17 13:01:41 +01:00
Erwan MATHIEU
a4137676af
Settings name consistency
2024-01-15 09:56:14 +01:00
wawanbreton
332222f9aa
Applied printer-linter format
2024-01-10 15:31:30 +00:00
Erwan MATHIEU
f00636d374
Merge remote-tracking branch 'origin/main' into optimized-prime-tower
2024-01-10 16:30:34 +01:00
Saumya Jain
148f4ca08e
Merge branch 'main' into Issue-4835-allow-to-set-print-sequence-manually
2024-01-10 13:40:13 +01:00
Remco Burema
c64dcb785c
Remove 'support_interface_skip_height' setting.
...
Was used for run-time efficiency, but it wasn't really ever set beyond one layer-height, which made it rather useless.
frontend part of CURA-11157 -- needed version upgrader as well, since it's the first alteration
2024-01-10 08:55:56 +01:00
Erwan MATHIEU
30b25975df
Make settings not settable par extruder
...
CURA-11395
2024-01-09 16:38:57 +01:00
c.lamboo
1f7b8efff0
Don't make raft_smoothing settable per extruder
...
CURA-11395
2024-01-09 16:26:14 +01:00
casperlamboo
d9feb88b24
Applied printer-linter format
2024-01-09 09:22:53 +00:00
c.lamboo
594e4a5ea6
Warn if raft extra margin exceeds raft margin of layer below
2024-01-09 10:20:42 +01:00
c.lamboo
af51ccf5f3
Move "Remove Raft Inside Corners" outside experimental
2024-01-09 10:17:10 +01:00
c.lamboo
37f350b134
Limit settings to their correct extruders
2024-01-09 10:15:17 +01:00
Erwan MATHIEU
aaa25104df
Merge branch 'main' into CURA-11395
2024-01-08 17:34:45 +01:00
Erwan MATHIEU
90ce6d7f76
Reorganize raft settings to a user-intuitive order
...
CURA-11228
2024-01-08 16:53:10 +01:00
casperlamboo
ff45f566d6
Applied printer-linter format
2024-01-08 13:46:14 +00:00
c.lamboo
a7137c5e63
Add raft settings to make margin and remove inside corners configurable per raft-type
...
Added teh following settings
- raft_base_margin
- raft_interface_margin
- raft_surface_margin
- raft_base_smoothing
- raft_interface_smoothing
- raft_surface_smoothing
- raft_base_remove_inside_corners
- raft_interface_remove_inside_corners
- raft_surface_remove_inside_corners
2024-01-08 14:44:17 +01:00
Erwan MATHIEU
13deab505e
Add/reorganize settings for raft walls
...
CURA-11228
2024-01-08 11:32:25 +01:00
