GitHub-Proxy/Cura
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura synced 2025-10-04 03:46:34 +08:00
Code Issues Packages Projects Releases Wiki Activity
35,962 Commits 295 Branches 268 Tags
Commit Graph

154 Commits

Author SHA1 Message Date
Rijk van Manen
a970e455d4
Merge branch 'main' into PP-15-enable-skin-edge-support 2022-06-02 17:01:29 +02:00
p.kuiper
7916407951 Implementation of various support structure improvements as explained in ticket PP-108. 
Relates to PP-108
 2022-06-02 16:33:59 +02:00
Jaime van Kessel
2d1abf79a8
Merge pull request #12416 from Ultimaker/PP-46-print-infill-before-walls 
revert PP-37
 2022-06-02 15:48:44 +02:00
Jaime van Kessel
65e4b0e0d7
Merge pull request #12412 from Ultimaker/PP-19_also_increase_jerk_for_support 
PP-19 - Also increase jerk for support
 2022-06-02 15:48:12 +02:00
Jaime van Kessel
9fc3357818
Merge pull request #12398 from Ultimaker/PP-93-enable-top-surface-skin-layers 
reduce top/bottom flow by enabling top surface skin layers
 2022-06-02 15:45:53 +02:00
p.kuiper
977b81da7f Removed duplicate entry bridge fan speed 3. 
Relates to PP-19
 2022-06-02 09:48:46 +02:00
p.kuiper
fec4888989 Clean up of jerk settings. Moved the jerk setting up to ultimaker.def.json. Removed duplicate entries in quality profiles and removed a number of strange jerk entries in the quality profiles. 
Relates to PP-19
 2022-06-02 09:04:13 +02:00
Rijk van Manen
877f8ca1cf revert PP-37 
PP-37 is not needed anymore because of PP-27. This solves the problem of PP-46 as well. For more details see PP-46
 2022-06-01 15:38:30 +02:00
Rijk van Manen
14355aa904 default retraction limit settings 
most ultimaker profiles use this setting as a default. PP-170
 2022-06-01 15:10:34 +02:00
Rijk van Manen
d352bbbbc5 reduce support interface flow 
The reasoning of PP-86 also holds for the support interface layers, however we forgot about support when we implemented PP-86. When doing PP-108 we found this improvement.
 2022-05-30 14:05:47 +02:00
Rijk van Manen
7c2b84184b reduce top/bottom flow by enabling top surface skin layers 
PP-93
 2022-05-30 14:00:16 +02:00
Rijk van Manen
e543416deb enable skin edge support 
For all ultimaker printers AND low infill density the skin edge support feature is used. PP-15
 2022-05-30 11:00:58 +02:00
p.kuiper
0db75501a3 Merge remote-tracking branch 'origin/main' into PP-3_improved_experimental_bridge_settings 
# Conflicts:
#	resources/definitions/ultimaker.def.json
 2022-05-30 07:59:50 +02:00
j.delarago
b7ad18d149 Merge branch 'master' into PP-54_decrease-resolution 
# Conflicts:
#	resources/definitions/ultimaker.def.json
#	resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg
#	resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
#	resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
#	resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
 2022-04-07 11:14:30 +02:00
p.kuiper
e24d2d15ae Reduced horizontal expansion offset to the theoretically correct value of 0.1*layer_height if the correction is performed on both sides of the wall (then totals 0.2*layer_height). 
Relates to PP-154
 2022-04-06 13:56:28 +02:00
Rijk van Manen
df72cd8da4 new default settings for ultimaker printers 
A higher resolution does not improve visual quality, a lower resolution means you need to improve firmware. PP-54
 2022-04-04 14:28:40 +02:00
Ghostkeeper
2d1b9c5409
Set Top Surface Layers to 0 and adjust flow to compensate 
It doesn't really work well with the monotonic order here.

Contributes to issue CURA-9065.
 2022-03-31 15:24:56 +02:00
p.kuiper
9fdeffd564 Better default for the experimental bridge settings. See PP-3 for details. 
Relates to PP-3
 2022-03-31 15:20:00 +02:00
Ghostkeeper
775d85b420
Merge branch 'PP-93_improve-top-bottom-flow' 2022-03-30 12:00:59 +02:00
Jaime van Kessel
efdb60e153 Remove area_deviation from ultimaker.def.json 
CURA-9036
 2022-03-25 14:41:56 +01:00
Jaime van Kessel
40fc587d64
Merge pull request #11675 from Ultimaker/PP-115_unify-wall-thickness 
PP-115_unify-wall-thickness
 2022-03-16 17:04:22 +01:00
Rijk van Manen
943e126cb4 set wall thickness to two lines by default 
With this equation the wall line count is two by default and exactly matches the wall thickness that will be printed. PP-115
 2022-03-15 09:44:05 +01:00
p.kuiper
a88cb2bb48 I accidently deleted the files while testing the profile changes and committed without them. Restored the files. 
Relates to PP-126
 2022-03-14 11:22:30 +01:00
p.kuiper
6f36998feb Moved the horizontal layer expansion correction (corrects for the bulging of the extruded beads) from the engineering intent profiles to the default profiles for all ultimaker machines (ultimaker.def.json). This will improve the dimensional accuracy of the default, visual and draft intents. 
Relates to PP-126
 2022-03-14 10:53:03 +01:00
Rijk van Manen
826b697329 reduce top bottom flow 
The top bottom is a 100% density part of the print. For these parts it is super important to not over extrude. At the same time we dont want an underextruded top layer, since that is looking ugly. That is why we enable a roofing layer and reduce the flow for the rest of the top/bottom. PP-93
 2022-03-10 14:27:42 +01:00
Rijk van Manen
2e25b84184 reduce flow for high infill density 
This was already merged into CURA4.13 but apparently lost in master. PP-86
 2022-03-10 14:25:42 +01:00
Jaime van Kessel
571ee5525b Merge branch 'libArachne_rebased' of github.com:Ultimaker/Cura into PP-25_close-to-100%-density-infill-behaviour-Arachne 2021-11-24 10:43:04 +01:00
Jelle Spijker
52d639f980
fixed missing , in json 2021-11-17 19:50:15 +01:00
Jaime van Kessel
34aa7240d4 Merge branch 'PP-55_reduce-cross3D-top-layer-bridge-distance_Arachne' of github.com:Ultimaker/Cura into libArachne_rebased 2021-11-17 14:25:57 +01:00
Jelle Spijker
322d48cdd7 Fixed speed flow equalization width factor 2021-11-15 16:54:47 +01:00
Rijk van Manen
c109bc3613 revert 100% density pattern hack 
In the fdmprinter definition the 'infill' is created by 999999 bottom layers to change to infill pattern to lines. This hack is reverted for ultimaker printers. More info: PP-25
 2021-11-15 15:42:47 +01:00
p.kuiper
3b0216a036 PP-60: Moved the libArachne setting changes and the thin wall settings from Ultimaker to All machines. So all third party machines will also get these settings. 2021-11-10 10:43:43 +01:00
Rijk van Manen
447c4e7368 optimized skin orientation for cross pattern 
The skin orientation is optimized for the cross (3d) pattern to reduce the bridge distance. For more information see PP-55.
 2021-11-10 10:14:44 +01:00
p.kuiper
de04c7d79b PP-60: Major clean up. Moved all common (libArachne + 4.12) settings to ultimaker.def.json from which all Ultimaker machines inherit their values 2021-11-09 12:13:02 +01:00
THeijmans
9cc1a24e11 Moves arachne setting changes to ultimaker2 layer 
Fixing a mistake from PP-28,

PP-44
 2021-10-21 09:48:00 +02:00
THeijmans
3803d28d3d Increase maximum extrusion deviation 
See LibArachneBeta slides
 2021-09-16 13:52:11 +02:00
THeijmans
dfd5768c5c Turns on print thin walls 
For Arachne profile iteration 2, PP-2
 2021-09-16 11:56:58 +02:00
Jaime van Kessel
9fcc513edd
Add PETG quality profiles 
CURA-8200
 2021-05-03 10:46:35 +02:00
Ghostkeeper
f4f990708f
Remove old 'category' metadata 
Most of it was incorrect and very inconsistent too. These are not used by our code any more.
 2020-04-28 09:27:31 +02:00
Jaime van Kessel
8d2083a539
Add temp warnings for the buildplate 
CURA-6977
 2019-12-24 10:54:51 +01:00
Ghostkeeper
0fe9e660b1
Don't show Silicone for UM printers that are incompatible with it anyway 
It's still an open bug that we show materials of which all configurations are incompatible with the printer.

Contributes to issue CURA-6262.
 2019-03-05 15:36:31 +01:00
Aleksei S
f021c83a3e Exclude HIPS and PETG material type from all UM printers. 
CURA-5149
 2018-03-26 16:50:59 +02:00
Ghostkeeper
202f7f87f8
Remove ID from definition files 
Sometimes it's out of sync. Sometimes even missing. Let's just not use that any more.

Contributes to issue CURA-4243.
 2017-11-02 12:53:06 +01:00
Lipu Fei
f50255f1c9 Disable relative_extrusion for UMs 
CURA-4219
 2017-09-11 10:27:13 +02:00
Ghostkeeper
4b4f971222
Make 'other' the default category 
This should make it a bit easier for others to create a new definition since there is less for them to 'have to know'. Previously they would be required to fill in as category Other, but now they can just leave the category out.
 2017-08-25 09:17:55 +02:00
Ghostkeeper
e1266ceb1f Change Ultimaker manufacturer to Ultimaker B.V. 
The material profiles are sent to UM3 with a manufacturer that's obtained from the printer definition rather than the material definition. The printer definition was 'Ultimaker' rather than 'Ultimaker B.V.' and the printer checked against this.

Contributes to issue CURA-4159.
 2017-08-11 10:24:13 +02:00
Jaime van Kessel
1f830e68bb Min & max values for extruder prime pos are now enforced for Ultimaker machines 
CURA-2375
 2016-09-27 16:12:02 +02:00
Ghostkeeper
6909f88ce6
Increase default limit on feed rate 
There is no real limit by default now. Only light speed (and the limit on the input element's length). The feed rate limit should be set by a machine definition. If there is no limit set, let there be no limit to what the user can input.

Contributes to issue CURA-2284.
 2016-09-06 10:30:27 +02:00
Ghostkeeper
b89a9a8113
Allow freezing temperatures 
But not on Ultimaker printers, because they crash.
 2016-08-04 12:50:03 +02:00
Tim Kuipers
67058c3d45 fix: definition visibility got borked (CURA-1443) 
machine definition visibility should be a metadata property and should be set to true for only those definitions which are actually machines
 2016-06-10 14:52:15 +02:00