Paul Kuiper
22b67f1c20
Increase small skin width from 0.8mm to 4mm to prevent jerky moves in small skin areas. Increase wipe distance to 0.8mm to improve seam quality.
...
PP-423
2024-01-18 15:53:11 +01:00
Erwan MATHIEU
612de4c248
Merge pull request #18028 from Ultimaker/PP-414-Reduce-raft-extention-add-border
...
PP-414 Improve raft boundary
2024-01-17 16:09:54 +01:00
Paul Kuiper
783f51aef2
Let the wall count of the middle and top raft interface follow the raft wall count
...
PP-414
2024-01-15 11:48:23 +01:00
Paul Kuiper
44441dfe5b
Improve the time estimates for the Method machines be increasing the acceleration and reducing the jerk. For dual extrusion a rough switch over time estimate is taken into account.
...
PP-377
2024-01-03 15:54:24 +01:00
Saumya Jain
afcf3e1e09
Merge branch 'main' into PP-408-improve-raft-quality
2023-12-15 16:13:45 +01:00
Paul Kuiper
df6239be89
Fix a bug in which Cura sets fanspeed in the 0..255 range instead of the 0..1 range for Method machines.
...
CURA-11441
2023-12-08 10:52:00 +01:00
Paul Kuiper
a9c3c2b4b4
Increased raft base layer speed from 5mm/s to 10mm/s and increased raft middle layer linewidth from 0.4 to 0.7mm to increase productivity.
...
PP-408
2023-12-05 15:25:52 +01:00
Paul Kuiper
66ad006bc5
Reduced line width of the middle raft layer from 1.2 to 0.4
...
Increase speed from 27.5mm/s to 90mm/s.
2023-11-30 14:15:00 +01:00
Paul Kuiper
83c2626884
When self-support is enabled do not use support material layers in the raft.
...
Note: Switching support settings takes longer in the UI due to the recalculations.
PP-402
2023-11-21 09:37:54 +01:00
HellAholic
bca778bca0
Revert "When self-support is enabled do not use support material layers in the raft."
...
This reverts commit d4966044ea19000ac67bd29738e1754b2dfaeb25.
2023-11-21 09:26:52 +01:00
Paul Kuiper
d4966044ea
When self-support is enabled do not use support material layers in the raft.
...
Note: Switching support settings takes longer in the UI due to the recalculations.
PP-402
2023-11-21 09:24:34 +01:00
Paul Kuiper
c15e52399c
- Removed step correction from z shrinkage compensation for the Method X
...
- Changed step size tfrom 0.2mm to 0.203mm for Method X
- Added material compensations for ABS-R and ABS-CF
- New resolve formula in fdmprinter.def.json to not use the shrinkage factors of support materials
2023-11-14 14:32:42 +01:00
pkuiper-ultimaker
003633547a
Applied printer-linter format
2023-11-13 10:13:57 +00:00
Paul Kuiper
3b13e644e0
Update ultimaker_method_base.def.json
2023-11-13 11:12:15 +01:00
Paul Kuiper
478648df8d
Increase the build volume of the Method machines such that they match CloudPrint.
...
CURA-11316
2023-11-13 10:58:14 +01:00
c.lamboo
c9730a2089
Revert "Revert "Increase print volume for method printers""
...
This reverts commit 70f77dde2924855e792de74b7e51a84ef94e68c7.
# Conflicts:
# resources/definitions/ultimaker_method_base.def.json
# resources/definitions/ultimaker_methodx.def.json
# resources/definitions/ultimaker_methodxl.def.json
2023-11-10 18:41:45 +01:00
Jaime van Kessel
0c78cdbdbd
Merge branch '5.6' of github.com:Ultimaker/Cura into 5.6
2023-11-07 12:47:11 +01:00
Jaime van Kessel
f3760fc1f6
Disable material sync support for method printers
...
No idea why it was turned on, but these machines don't support that at all
CURA-11285
2023-11-07 12:46:24 +01:00
casperlamboo
f4d1db8961
Applied printer-linter format
2023-11-06 16:25:27 +00:00
c.lamboo
70f77dde29
Revert "Increase print volume for method printers"
...
This reverts commit a111b39e
2023-11-06 17:24:08 +01:00
Erwan MATHIEU
a111b39ee4
Increase print volume for method printers
...
CURA-11260
2023-11-06 14:40:05 +01:00
Remco Burema
35d1ae3272
Fix 'brand alignment' messing up actual print files.
2023-11-03 17:04:26 +01:00
Casper Lamboo
34ee25aa4c
Merge branch '5.6' into Update_Method
2023-11-03 13:32:18 +01:00
Casper Lamboo
e16127caba
Merge pull request #17195 from Ultimaker/CURA-11267-Update_MakerBot_B
...
CURA-11267 Update the Naming of the Method printers
2023-11-03 13:31:06 +01:00
Paul Kuiper
f9dcb89d3e
- Bug fix: raft_air_gap -> raft_airgap
...
- Larger prime tower foot (6->10mm)
- RapidRinse: disable fan and small area temperature = print temeprature
2023-11-03 13:19:12 +01:00
MariMakes
d8e6a2b0b4
Align S-line printers
...
This should be in line with the updated brand guide.
2023-11-03 10:54:28 +01:00
Remco Burema
ca099c2bb8
Don't define value for disabled print-sequence setting.
2023-11-03 10:40:01 +01:00
MariMakes
a43b98dd21
Update the MakerBot B
...
To align with the branding guide.
CURA-11267
2023-11-02 17:51:07 +01:00
Remco Burema
b0d4d4a0e7
Prevent one-at-a-time print-sequence on Method printers.
...
There'd _maybe_ be space for prints less than 1cm high for this mode, but even that is tricky.
2023-11-01 17:24:51 +01:00
Jelle Spijker
c3ed31583b
Remove limit_support_retractions since that is no longer used
2023-10-31 19:55:21 +01:00
pkuiper-ultimaker
8fa6cd2f77
Applied printer-linter format
2023-10-31 16:11:56 +00:00
Paul Kuiper
4c575908fc
- Method X and Method XL profiles for ABS-R, ABS-CF and RapidRinse
2023-10-31 17:10:33 +01:00
