Remco Burema
c64dcb785c
Remove 'support_interface_skip_height' setting.
...
Was used for run-time efficiency, but it wasn't really ever set beyond one layer-height, which made it rather useless.
frontend part of CURA-11157 -- needed version upgrader as well, since it's the first alteration
2024-01-10 08:55:56 +01:00
Thomas Rahm
536c95555e
Suggested profile changes: Ensure minimum support area is 0 for tree support to avoid 'No trees generated' bug report. Removed extra z heightfor Tree support as this should no longer be required with the new implementation
2023-03-29 06:50:30 +02:00
Remco Burema
cf922295db
Try before the beta. After it's too late.
...
A lot was changed in support. The short of it is that we now think towers should be on by default, but aren't _completely_ certain about it. It makes more sense to do make this change before the beta rather than just before stable, so we have a chance to revert should it prove disastrous.
2023-02-21 15:43:12 +01:00
jspijker
53d8e0c730
Applied printer-linter format
...
To make sure we have uniform diffs with our PR's
2022-12-30 22:05:41 +01:00
Jaime van Kessel
2c331604e8
Clean up a lot of duplicate settings from machine profiles
...
These were errors that were copy pasted from other definitions. So leaving them as is would
continue to decrease the quality of third party profiles.
2022-09-06 11:39:08 +02:00
Jaime van Kessel
9d12ee841b
Remove unneeded values from machine profiles
2022-09-06 10:21:21 +02:00
Jaime van Kessel
89fbac74f9
Fix incorrectly setting material_print_temperature
...
If this is set to an absolute value, the material settings wont have any effect anymore.
A much better way is to just set the default temperature, which is what the intent is
2022-09-01 17:51:25 +02:00
Jaime van Kessel
3101f2aea4
Remove filter_out_tiny_gaps from definitions
...
This setting doesn't exist anymore.
2022-06-17 15:57:40 +02:00
Remco Burema
db33f67666
Partial revert: Don't remove 'Print Thin Walls'.
...
It still makes sense, even in a libArachne/Variable Line Width sense.
CURA-7148
2020-12-10 12:49:00 +01:00
Remco Burema
77c39247f9
... also of course delete them from definitions.
...
Context: Print Thin Walls and Fill Perimeter Gaps are old settings that aren't needed any more since we switched to libArachne (Varianble Line Widths).
CURA-7148
2020-12-09 21:20:08 +01:00
Ghostkeeper
9a73f457d8
Fix up whitespace
...
Mixing tabs and spaces and all that. Weird stuff.
Contributes to issue CURA-7803.
2020-10-28 16:23:22 +01:00
Ghostkeeper
4497c29721
Don't use stylized capitals
...
Equal chances for printers and brands, please.
Contributes to issue CURA-7803.
2020-10-28 16:18:13 +01:00
KOONOVO3DPrinter
77f5fefc5d
Create koonovo_base.def.json
...
Create koonovo_elf.def.json
Create koonovo_pyramid.def.json
Create koonovo_base_extruder_1.def.json
Add files via upload
Add files via upload
Add files via upload
Update koonovo_base.def.json
Delete base_global_draft.inst.cfg
Delete base_global_high.inst.cfg
Delete base_global_standard.inst.cfg
Add files via upload
Update koonovo_base.def.json
Update koonovo_elf.def.json
delete extruder1
Update koonovo_pyramid.def.json
delete extruder1
Delete koonovo.png
Add files via upload
Update koonovo_base.def.json
change first_start_actions
Rename base_global_draft.inst.cfg to koonovo_base_global_draft.inst.cfg
Rename base_global_high.inst.cfg to koovono_base_global_high.inst.cfg
Rename base_global_standard.inst.cfg to koonovo_base_global_standard.inst.cfg
Update koonovo_base.def.json
"first_start_actions": [ "DiscoverUM3Action" ] change "first_start_actions": [ "MachineSettingsAction" ],
Update koonovo_base.def.json
change retraction_speed
Create koonovo_d3.def.json
This is an independent double X axis, double extrusion machine
Add files via upload
This is an independent double X axis, double extrusion machine
Add files via upload
This is an independent double X axis, double extrusion machine
Delete koonovo_d3.def.json
Add files via upload
Delete koonovo_d3_extruder_0.def.json
Delete koonovo_d3_extruder_1.def.json
Add files via upload
Delete koonovo_d3.stl
Add files via upload
Update koonovo_kn3_extruder_0.def.json
Update koonovo_kn3_extruder_1.def.json
Update koonovo_kn3.def.json
Update koonovo_base.def.json
Update koonovo_kn3_extruder_0.def.json
Update koonovo_kn3_extruder_1.def.json
Update koonovo_base.def.json
Update and rename koonovo_base_extruder_1.def.json to koonovo_base_extruder_0.def.json
Update koonovo_base.def.json
Update koonovo_kn3.def.json
Update koonovo_kn3_extruder_0.def.json
Update koonovo_kn3_extruder_1.def.json
Update koonovo_kn3_extruder_0.def.json
Update koonovo_kn3_extruder_1.def.json
Add files via upload
Add files via upload
Add files via upload
2020-10-28 16:14:25 +01:00
