Remco Burema
d84960c7b7
Gradual infill with Tree Support 2.0 caused floating parts.
...
Should not be on when doing tree support anyway, so change configs to reflect that.
CURA-10065
2023-04-25 17:51:40 +02:00
casperlamboo
5037d2f642
Applied printer-linter format
2023-03-23 15:23:42 +00:00
c.lamboo
2181bbceb3
Fix gcode flavors in profiles
...
For some printer definitions the `machine_gcode_flavor` was entered incorrectly (the display name was used rather than the flavor-key). Previously in combo boxes the flavour would default to the first key (which is "marlin"). Due to recent changes we will not default anymore to the first option, but instead show nothing. By changing the flavor to the correct key the flavors will show up correctly again.
CURA-10374
2023-03-23 16:22:22 +01:00
jspijker
53d8e0c730
Applied printer-linter format
...
To make sure we have uniform diffs with our PR's
2022-12-30 22:05:41 +01:00
Jaime van Kessel
ee551e48b3
Restore incorrectly removed settings
...
Something went wrong here, it removed the wrong defaults...
2022-09-14 13:45:27 +02:00
Jaime van Kessel
2c331604e8
Clean up a lot of duplicate settings from machine profiles
...
These were errors that were copy pasted from other definitions. So leaving them as is would
continue to decrease the quality of third party profiles.
2022-09-06 11:39:08 +02:00
Remco Burema
694d9987d3
Correct superfluous commas,
...
Why does JSON not allow trailing comma's, Ugh,
CURA-7279
2021-08-06 18:31:04 +02:00
Remco Burema
562be41bd0
Also remove not-existing-anymore settings from definitions and the like.
...
CURA-7279
2021-08-06 18:23:10 +02:00
Nino van Hooff
617b07061d
Take support_enable into account when evaluating support_structure.
...
Unsure whether this is necessary, but we decided to do this to make
the evaluation logically equivalent to the existing code currently
in master.
CURA-6711
2020-07-14 09:44:40 +02:00
Nino van Hooff
e006bad297
Update infill_rate resolve value for support_structure
...
CURA-6711
2020-07-10 11:23:28 +02:00
Ghostkeeper
f4f990708f
Remove old 'category' metadata
...
Most of it was incorrect and very inconsistent too. These are not used by our code any more.
2020-04-28 09:27:31 +02:00
Ghostkeeper
6063307a31
Remove overrides of unused machine setting
...
Contributes to issue CURA-7328.
2020-03-30 12:10:35 +02:00
Ghostkeeper
e26e825d83
Overwrite gantry height value instead of default_value
...
Because the default in fdmprinter has a formula in the value, the default_value properties wouldn't get used any more.
2019-05-13 09:30:32 +02:00
Ghostkeeper
25bbc1e66e
Set default infill density for tree support to 0% in profiles
...
In profiles that overwrite the support infill density, also keep it 0% for tree support.
Except PVA profiles. Those are probably better off with their normal infill density.
Fixes #5297 .
2019-04-29 12:06:54 +02:00
milkok
85575f6782
Update winbo_dragonl4.def.json
2018-08-03 09:58:23 +08:00
milkok
29f2bb8a3a
Update winbo_dragonl4.def.json
2018-07-28 17:15:36 +08:00
milkok
dd9d4d1e2b
Create winbo_dragonl4.def.json
2018-07-24 17:19:36 +08:00
